Reusable MOF-Coated Chitosan@Paper Strip Composite for Real-Time Monitoring of Pesticide Pendimethalin and Organoarsenic Feed Additive Roxarsone Levels in Environmental Water, Food, and Vegetable Samples.

An alarming increase in the use of pesticides and organoarsenic compounds and their toxic impacts on the environment have inspired us to develop a selective and highly sensitive sensor for the detection of these pollutants. Herein, a bio-friendly, low-cost Al-based luminescent metal-organic framework (1')-based fluorescent material is demonstrated that helps in sustaining water quality by rapid monitoring and quantification of a long-established pesticide (pendimethalin) and a widely employed organoarsenic feed additive (roxarsone). A pyridine-functionalized porous aluminum-based metal-organic framework (Al-MOF) was solvothermally synthesized. After activation, it was used for fast (<10 s) and selective turn-off detection of roxarsone and pendimethalin over other competitive analytes. This is the first MOF-based recyclable sensor for pendimethalin with a remarkably low limit of detection (LOD, 14.4 nM). Real-time effectiveness in detection of pendimethalin in various vegetable and food extracts was successfully verified. Moreover, the aqueous-phase recyclable detection of roxarsone with an ultralow detection limit (13.1 nM) makes it a potential candidate for real-time application. The detection limits for roxarsone and pendimethalin are lower than the existing luminescent material based sensors. Furthermore, the detection of roxarsone in different environmental water and a wide pH range with a good recovery percentage was demonstrated. In addition, a cheap and bio-friendly 1'@chitosan@paper strip composite was prepared and successfully employed for the hands-on detection of pendimethalin and roxarsone. The turn-off behavior of 1' in the presence of pendimethalin and roxarsone was examined systematically, and plausible mechanistic pathways were proposed with the help of multiple experimental evidences.

The interactions of pectin with TiO2 nanoparticles measured by FT-IR are confirmed in a model of the gastrointestinal tract.

The presence of nanoparticle fractions (<100 nm, NPs) in the food additive TiO2 (E171) rises concerns about its potential harmful impact on human health. The knowledge about the interaction of TiO2 NPs with food components is limited to proteins or polyphenols. The present paper is the first to report on interactions between TiO2 NPs and high molecular pectins that form gels in boluses and are remain nearly intact during digestion until they reach the colon. Direct interactions were studied using Fourier Transform Infrared Spectroscopy while indirect ones were monitored by measuring the "absorption" of TiO2 using a 0.2 microfiltration membrane, during in vitro digestion in a model of the gastro-intestinal tract. The FT-IR spectra registered for pectin-TiO2 NPs solutions confirmed changes in band intensities at 1020, 1100, 1610, and 1740 cm-1, suggesting interactions taking place mainly via the COO- groups. Furthermore, the I(1020)/I(1100) ratio was decreased (C-O stretching vibrations), suggesting partial blocking of the skeletal vibrations caused by interactions between pectin and TiO2. The modelled in vitro digestions confirmed that the "availability" of Ti was reduced when TiO2 NPs were combined with pectin, as compared to TiO2 NPs "digested" alone.

Production, characterization, and potential applications of lipopeptides in food systems: A comprehensive review.

Lipopeptides are a class of lipid-peptide-conjugated compounds with differing structural features. This structural diversity is responsible for their diverse range of biological properties, including antimicrobial, antioxidant, and anti-inflammatory activities. Lipopeptides have been attracting the attention of food scientists due to their potential as food additives and preservatives. This review provides a comprehensive overview of lipopeptides, their production, structural characteristics, and functional properties. First, the classes, chemical features, structure-activity relationships, and sources of lipopeptides are summarized. Then, the gene expression and biosynthesis of lipopeptides in microbial cell factories and strategies to optimize lipopeptide production are discussed. In addition, the main methods of purification and characterization of lipopeptides have been described. Finally, some biological activities of the lipopeptides, especially those relevant to food systems along with their mechanism of action, are critically examined.

Influence of consumption of the food additive carrageenan on the gut microbiota and the intestinal homeostasis of mice.

The safety of the carrageenan (CGN) consumption as a food additive is under debate, with negative effects being associated with the products of hydrolysis of CGN. Moreover, there is an increasing need to integrate gut microbiome analysis in the scientific risk assessment of food additives. The objective of this study was to test the effects of CGN consumption on the gut microbiota and the intestinal homeostasis of young male and female mice. Female and male ICR-CD1 mice (8 weeks old) orally received 540 mg kg-1 day-1 of CGN, representing the maximum-level exposure assessment scenario surveyed for children, over the course of two weeks. Fecal material and peritoneal immune cells were analyzed to determine changes in the fecal microbiota, based on the analysis of bacterial 16S rRNA gene amplicon sequences and short-chain fatty acid (SCFA) concentrations, and some immune functions and redox parameters of peritoneal leukocytes. Non-significant microbiota taxonomical changes associated with CGN intake were found in the mouse stools, resulting the housing time in an increase in bacterial groups belonging to the Bacteroidota phylum. The PICRUSt2 functional predictions showed an overall increase in functional clusters of orthologous genes (COGs) involved in carbohydrate transport and metabolism. A significant increase in the cytotoxicity of fecal supernatants was observed in CGN-fed mice, which correlated with worsening of immune functions and oxidative parameters. The altered immunity and oxidative stress observed in young mice after the consumption of CGN, along with the fecal cytotoxicity shown towards intestinal epithelial cells, may be associated with the gut microbiota's capacity to degrade CGN. The characterization of the gut microbiota's ability to hydrolyze CGN should be included in the risk assessment of this food additive.

Carrageenan in the Diet: Friend or Foe for Inflammatory Bowel Disease?

While the exact pathogenesis of IBD remains unclear, genetic, environmental and nutritional factors as well as the composition of the gut microbiome play crucial roles. Food additives, which are increasingly consumed in the Western diet, are being investigated for their potential effects on IBD. These additives can affect gut health by altering the composition of the microbiota, immune responses, and intestinal permeability, contributing to autoimmune diseases and inflammation. Despite the growing number of studies on food additives and IBD, the specific effects of carrageenan have not yet been sufficiently researched. This review addresses this gap by critically analyzing recent studies on the effects of carrageenan on the gut microbiota, intestinal permeability, and inflammatory processes. We searched the MEDLINE and SCOPUS databases using the following terms: carrageenan, carrageenan and inflammatory bowel disease, carrageenan and cancer, food additives and microbiome, food additives and intestinal permeability, and food additives and autoimmune diseases. In animal studies, degraded carrageenan has been shown to trigger intestinal ulceration and inflammation, highlighting its potential risk for exacerbating IBD. It can affect the gut microbiota, reduce bacterial diversity, and increase intestinal permeability, contributing to "leaky gut" syndrome. Some studies suggest that carrageenan may inhibit the growth of cancer cells by influencing the progression of the cell cycle, but the anti-cancer effect is still unclear. Carrageenan may also increase glucose intolerance and insulin resistance. Further research is needed to determine whether carrageenan should be excluded from the diet of individuals with IBD.

Effects of different additives on cattle feed intake and performance - a systematic review and meta-analysis.

In the last few years, there has been a growing interest in the use of natural feed additives in animal feed. These can be used as replacements for antibiotics, to alter rumen fermentation and increase feed efficiency in ruminants. Therefore, the objective of this study is to evaluate the effects of adding different feed additives in the diet of beef and dairy cattle on their performance, dry matter intake (DMI) and feed efficiency, through a systematic review followed by meta-analysis. The systematic review suggested 43 peer-reviewed publications, according to the pre-established criteria. In beef cattle, the ionophore antibiotics reduced the DMI, improved the feed efficiency without interfering in the average daily gain (ADG). Non-ionophore antibiotics and propolis extract increased the ADG. In dairy cattle, the ionophores, yeast-based additives, and enzyme additives increased the feed efficiency, DMI, and daily milk production (MY), respectively. Essential oil supplementation in beef and dairy cattle had no effect on the feed intake and animal performance. The systematic review and meta-analysis allowed us to conclude that different feed additives have different effects on cattle performance, however, our results suggest that there are a few gaps regarding their effects on animal performance.

Skeletal muscle metabolic dysfunction with circulating carboxymethyl-lysine in dietary food additive-induced leaky gut.

Impaired intestinal permeability induces systemic inflammation and metabolic disturbance. The effect of a leaky gut on metabolism in skeletal muscle, a major nutrient consumer, remains unclear. In this study, we aimed to investigate the glucose metabolic function of the whole body and skeletal muscles in a mouse model of diet-induced intestinal barrier dysfunction. At Week 2, we observed higher intestinal permeability in mice fed a titanium dioxide (TiO2)-containing diet than that of mice fed a normal control diet. Subsequently, systemic glucose and insulin tolerance were found to be impaired. In the skeletal muscle, glucose uptake and phosphorylation levels in insulin signaling were lower in the TiO2 group than those in the control group. Additionally, the levels of pro-inflammatory factors were higher in TiO2-fed mice than those in the control group. We observed higher carboxymethyl-lysin (CML) levels in the plasma and intestines of TiO2-fed mice and lower insulin-dependent glucose uptake in CML-treated cultured myotubes than those in the controls. Finally, soluble dietary fiber supplementation improved glucose and insulin intolerance, suppressed plasma CML, and improved intestinal barrier function. These results suggest that an impaired intestinal barrier leads to systemic glucose intolerance, which is associated with glucose metabolism dysfunction in the skeletal muscles due to circulating CML derived from the intestine. This study highlights that the intestinal condition regulates muscle and systemic metabolic health.

Real-time quantitative detection of hydrocolloid adulteration in meat based on Swin Transformer and smartphone.

Hydrocolloids are widely used in meat products as common food additives. However, research has indicated that excessive consumption of these hydrocolloids may have potential health implications. Currently, consumers mainly rely on sensory evaluation to identify hydrocolloid adulteration in meat products. Although many studies on quantitative detection of hydrocolloids have been conducted by biochemical methods in laboratory environments, there is currently a lack of effective tools for consumers and regulators to obtain real-time and reliable information on hydrocolloid adulteration. To address this challenge, a smartphone-based computer vision method was developed to quantitatively detect carrageenan adulteration in beef in this work. Specifically, Swin Transformer models, along with pre-training and fine-tuning techniques, were used to successfully automate the classification of beef into nine different levels of carrageenan adulteration, ranging from 0% to 20%. Among the tested models, Swin-Tiny (Swin-T) achieved the highest trade-off performance, with a Top-1 accuracy of 0.997, a detection speed of 3.2 ms, and a model size of 103.45 Mb. Compared to computer vision, the electrochemical impedance spectroscopy achieved a lower accuracy of 0.792 and required a constant temperature environment and a waiting time of around 30 min for data stabilization. In addition, Swin-T model was also capable of distinguishing between different types of hydrocolloids with a Top-1 accuracy of 0.975. This study provides consumers and regulators with a valuable tool to obtain real-time quantitative information about meat adulteration anytime, anywhere. PRACTICAL APPLICATION: This research provides a practical solution for regulators and consumers to non-destructively and quantitatively detect the content and type of hydrocolloids in beef in real-time using smartphones. This innovation has the potential to significantly reduce the costs associated with meat quality testing, such as the use of chemical reagents and expensive instruments.

Exploration of formation and in vitro release mechanism of supramolecular self-assembled Licochalcone A eutectogel for food application.

Licochalcone A (LCA) is extracted from licorice plants and used as a food additive. Citric acid (CA) and alanine (Ala) are food additives with good regulatory functions. This study aims to investigate the formation and in vitro release mechanism of the LCA eutectogel using supramolecular self-assembly technology. The mechanism of self-assembly indicates that the resulting eutectogel has strong intermolecular interactions. The formation mechanism of LCA eutectogel suggests that LCA is dispersed in nano form in the DES solution before self-assembly and dispersed in molecular form in the eutectogel after self-assembly. Mesoscopic MD simulation studies indicate that the interaction energy between LCA Ala-CA(5:5) eutectogel and the solvent interface is relatively low, suggesting it may have a better drug release rate, consistent with the in vitro release results. In conclusion, the study successfully prepares LCA eutectogel and provides theoretical guidance for the development and application of novel eutectogel for food application.

Personalized nutrition with 3D-printed foods: A systematic review on the impact of different additives.

Three-dimensional (3D) printing is one of the world's top novel technologies in the food industry due to the production of food in different conditions and places (restaurants, homes, catering, schools, for dysphagia patients, and astronauts' food) and the production of personalized food. Nowadays, 3D printers are used in the main food industries, including meat, dairy, cereals, fruits, and vegetables, and have been able to produce successfully on a small scale. However, due to the expansion of this technology, it has challenges such as high-scale production, selection of printable food, formulation optimization, and food production according to the consumer's opinion. Food additives (gums, enzymes, proteins, starches, polyphenols, spices, probiotics, algae, edible insects, oils, salts, vitamins, flavors, and by-products) are one of the main components of the formulation that can be effective in food production according to the consumer's attitude. Food additives can have the highest impact on textural and sensory characteristics, which can be effective in improving consumer attitudes and reducing food neophobia. Most of the 3D-printed food cannot be printed without the presence of hydrocolloids, because the proper flow of the selected formulation is one of the key factors in improving the quality of the printed product. Functional additives such as probiotics can be useful for specific purposes and functional food production. Food personalization for specific diseases with 3D printing technology requires a change in the formulation, which is closely related to the selection of correct food additives. For example, the production of 3D-printed plant-based steaks is not possible without the presence of additives, or the production of food for dysphagia patients is possible in many cases by adding hydrocolloids. In general, additives can improve the textural, rheological, nutritional, and sensory characteristics of 3D printed foods; so, investigating the mechanism of the additives on all the characteristics of the printed product can provide a wide perspective for industrial production and future studies.

Trends in pulse voltammetric techniques applied to foodstuffs analysis: The food additives detection.

Food additives are chemical compounds intentionally added during foodstuff production to control technological functions, such as pH, viscosity, stability (color, flavor, taste, and odor), homogeneity, and loss of nutritional value. These compounds are fundamental in inhibition the degradation process and prolonging the shelf life of foodstuffs. However, their inadequate employment or overconsumption can adversely affect consumers' health with the development of allergies, hematological, autoimmune, and reproductive disorders, as well as the development of some types of cancer. Thus, the development and application of simple, fast, low-cost, sensitivity, and selectivity analytical methods for identifying and quantifying food additives from various chemical classes and in different foodstuffs are fundamental to quality control and ensuring food safety. This review presents trends in the detection of food additives in foodstuffs using differential pulse voltammetry and square wave voltammetry, the main pulse voltammetric techniques, indicating the advantages, drawbacks, and applicability in food analysis. Are discussed the importance of adequate choices of working electrode materials in the improvements of analytical results, allowing reliable, accurate, and inexpensive voltammetric methods for detecting these compounds in foodstuffs samples.

Nanosized Additives: Silicon Dioxide's Potential Role in Development of Food Sensitivities in Mice.

The anticaking agent, used in a wide variety of powdered food products, interfered with immune tolerance of ovalbumin, a model antigen; and it worsened gut inflammation in a mouse model of celiac disease.

Composite Eu@Cd-CP as a fluorescent probe for the detection of some food additives.

A transition metal coordination polymer (CP), [Cd(Hdpcp)]n (Cd-CP) was prepared based on 3-(2,4-dicarboxyphenyl)-6-carboxypyridine ligand (H3dpcp), and then its composite Eu@Cd-CP was synthesized by the post-modification through loading Eu3+ ions on Cd-CP. Eu@Cd-CP has outstanding fluorescence stability in aqueous solution with a wide range of pH. Furthermore, Eu@Cd-CP can distinguish sodium salicylate (SS) and sodium dehydroacetate (SA) in some food additives by quenching the characteristic fluorescence of Eu3+ ion. Eu@Cd-CP is the first known CP-based fluorescent probe for selective detection of SS and SA. In addition, the fluorescence mechanisms of discerning above analytes by Eu@Cd-CP have been thoroughly evaluated. It has found that synergistic effect of the dynamic process, photoinduced electron transfer (PET) process, energy absorption competition, and formation of Eu-O bonding interactions in sensing SA lead to the fluorescence quenching of Eu@Cd-CP. The fluorescence response mechanism of Eu@Cd-CP with SA is ascribed to the combination of the dynamic process, PET process, and energy absorption competition. A series of portable devices based on Eu@Cd-CP including fluorescence test strips, lamp beads, and composite films were developed to discern SS and SA via visual changes in luminescence color. This composite material can be potentially used as a multifunctional fluorescent probe for practical applications.

Common food additive carrageenan inhibits proglucagon expression and GLP-1 secretion by human enteroendocrine L-cells.

Proglucagon mRNA expression and GLP-1 secretion by cultured human L-cells (NCI-H716) were inhibited following exposure to λ-carrageenan, a commonly used additive in processed foods. Carrageenan is composed of sulfated or unsulfated galactose residues linked in alternating alpha-1,3 and beta-1,4 bonds and resembles the endogenous sulfated glycosaminoglycans. However, carrageenan has unusual alpha-1,3-galactosidic bonds, which are not innate to human cells and are implicated in immune responses. Exposure to carrageenan predictably causes inflammation, and carrageenan impairs glucose tolerance and contributes to insulin resistance. When cultured human L-cells were deprived overnight of glucose and serum and then exposed to high glucose, 10% FBS, and λ-carrageenan (1 µg/ml) for 10 minutes, 1 h, and 24 h, mRNA expression of proglucagon and secretion of GLP-1 were significantly reduced, compared to control cells not exposed to carrageenan. mRNA expression of proglucagon by mouse L-cells (STC-1) was also significantly reduced and supports the findings in the human cells. Exposure of co-cultured human intestinal epithelial cells (LS174T) to the spent media of the carrageenan-treated L-cells led to a decline in mRNA expression of GLUT-2 at 24 h. These findings suggest that ingestion of carrageenan-containing processed foods may impair the production of GLP-1, counteract the effect of GLP-1 receptor agonists and induce secondary effects on intestinal epithelial cells.

Novel feed additive delivers antimicrobial copper and influences fecal microbiota in pigs.

Dehydrated alginate beads formulated with copper were synthesized and tested as a feed additive to influence the microbiota in finishing pigs and potentially use them as a preharvest intervention to reduce fecal pathogen shedding. The efficacy of the copper beads was tested in vitro and in vivo. In vitro, Salmonella was significantly (P < 0.05) reduced when in contact with the copper beads solution for up to 6 h, with a 5.4 log CFU/mL reduction over the first hour. Chemical analysis of the soak solutions demonstrated the beads delivered their copper payload gradually over the same period the bactericidal effect was observed. For the in vivo experiments, pigs (n = 48) supplemented with the copper beads experienced significant shifts in their microbiota. Enterobacteriaceae (EB) increased by 1.07 log CFU/g (P < 0.05), while lactic acid bacteria (LAB) decreased by 1.22 log CFU/g (P < 0.05) during the treatment period. When beads were removed from the feed, EB and LAB concentrations returned to baseline, indicating copper beads led to measurable and significant changes in microbial loads. Fecal microbiome analysis conducted to explore additional changes by copper bead supplementation demonstrated that, at the phylum level, there was an increase in Firmicutes, Euryarchaeota, and Acidobacteriota, while at the genus level, an increase in Methanosphaera and Pseudomonas was observed. Measures of copper in swine feces showed values ~20 times higher in the treatment group than in the control group during the treatment period, suggesting that dehydrated alginate copper beads were effective in delivering antimicrobial copper to the animal hindgut.IMPORTANCECopper has long been known to have antimicrobial properties. However, when water-soluble salts are fed to livestock, the copper may rapidly dissolve in gastric contents and fail to reach the gut. Here, specially formulated copper beads are seamlessly incorporated into feed and allow copper to remain longer in the gastrointestinal tract of animals, reach deep into both the foregut and hindgut, and shift microbial populations. The technology delivers antimicrobial copper to the animal hindgut and potentially reduces pathogenic microorganisms before animal slaughter.

Inclusion Complexes of Litsea cubeba (Lour.) Pers Essential Oil into ß-Cyclodextrin: Preparation, Physicochemical Characterization, Cytotoxicity and Antifungal Activity.

The uses of natural compounds, such as essential oils (EOs), are limited due to their instability to light, oxygen and temperature, factors that affect their application. Therefore, improving stability becomes necessary. The objective of this study was to prepare inclusion complexes of Litsea cubeba essential oil (LCEO) with ß-cyclodextrin (ß-CD) using physical mixing (PM), kneading (KN) and co-precipitation (CP) methods and to evaluate the efficiency of the complexes and their physicochemical properties using ATR-FTIR, FT-Raman, DSC and TG. The study also assessed cytotoxicity against human colorectal and cervical cancer cells and antifungal activity against Aspergillus flavus and Fusarium verticillioides. The complexation efficiency results presented significant evidence of LCEO:ß-CD inclusion complex formation, with KN (83%) and CP (73%) being the best methods used in this study. All tested LCEO:ß-CD inclusion complexes exhibited toxicity to HT-29 cells. Although the cytotoxic effect was less pronounced in HeLa tumor cells, LCEO-KN was more active against Hela than non-tumor cells. LCEO-KN and LCEO-CP inclusion complexes were efficient against both toxigenic fungi, A. flavus and F. verticillioides. Therefore, the molecular inclusion of LCEO into ß-CD was successful, as well as the preliminary biological results, evidencing that the ß-CD inclusion process may be a viable alternative to facilitate and increase future applications of this EO as therapeutic medication, food additive and natural antifungal agent.

Computational framework for identifying and evaluating mutagenic and xenoestrogenic potential of food additives.

Food additives are chemicals incorporated in food to enhance its flavor, color and prevent spoilage. Some of these are associated with substantial health hazards, including developmental disorders, increase cancer risk, and hormone disruption. Hence, this study aimed to comprehend the in-silico toxicology framework for evaluating mutagenic and xenoestrogenic potential of food additives and their association with breast cancer. A total of 2885 food additives were screened for toxicity based on Threshold of Toxicological Concern (TTC), mutagenicity endpoint prediction, and mutagenic structural alerts/toxicophores identification. Ten food additives were identified as having mutagenic potential based on toxicity screening. Furthermore, Protein-Protein Interaction (PPI) analysis identified ESR1, as a key hub gene in breast cancer. KEGG pathway analysis verified that ESR1 plays a significant role in breast cancer pathogenesis. Additionally, competitive interaction studies of the predicted potential mutagenic food additives with the estrogen receptor-α were evaluated at agonist and antagonist binding sites. Indole, Dichloromethane, Trichloroethylene, Quinoline, 6-methyl quinoline, Ethyl nitrite, and 4-methyl quinoline could act as agonists, and Paraldehyde, Azodicarbonamide, and 2-acetylfuranmay as antagonists. The systematic risk assessment framework reported in this study enables the exploration of mutagenic and xenoestrogenic potential associated with food additives for hazard identification and management.

Risk assessment of feed components of botanical origin - Approaches taken in the European Union.

In view of a continuous trend in replacing synthetic feed additives and especially flavouring compounds by botanical preparations, different aspects of the safety evaluations of plants and plant-derived preparations and components in feed are discussed. This includes risk assessment approaches developed by the European Food Safety Authority (EFSA) for phytotoxins regarding unintentional exposure of target animals and of consumers to animal derived food via carry-over from feed. Relevant regulatory frameworks for feed additives and feed contaminants in the European Union are summarised and the essentials of existing guidelines used in the safety evaluation of botanicals and their preparations and components in feed are outlined. The examples presented illustrate how the safety of the botanicals, their preparations and components present in feed is assessed. An outlook on possible future developments in risk assessment by applying new in vitro and in silico methodologies is given.

Coupling of a streamlined solid-liquid extraction protocol with LC-ESI-MS/MS for the regular oversight of illegal bromate additive use: An accurate and sensitive determination method in preliminary and bakery products.

A reliable solid-liquid extraction protocol coupled with liquid chromatography-electrospray ionization-tandem mass spectrometry in the negative-ion mode was developed and validated for illegal bromate determination in preliminary and bakery products. Crude and dried-treated samples were directly extracted with acetonitrile-water (4:1, v/v). Bromate was determined using a Phenomenex Synergi™ Polar reversed-phase column and MS/MS under multiple reaction monitoring. The chosen solvent efficiently extracted bromate with all applied extraction-assisting techniques (p > 0.05). Although this assay avoids cleanup procedures, matrix effect of <-11% was achieved. Rapid bromate separation in only 8 min was attained by a reversed-phase column. In both commodities, linearity range, R2, recovery%, repeatability, intermediate precision, LOD and LOQ results were 0.05-100 ng mL-1, >0.9999, 88.6-103%, 2.93-9.80% and 9.64-10.10%, 0.015 µg kg-1 and 0.05 µg kg-1, respectively. Out of 288 tested real samples, 13.9% of violations were observed. This high-sensitivity protocol offers effective oversight and consumer protection.