Comparison of best landmarks for calculating fetal jaw measurements by ultrasound and MRI in micrognathia.

BACKGROUND: Micrognathia can be diagnosed in utero with ultrasound by measuring the jaw index and/or inferior facial angle, though it can be challenging due to fetal positioning. The jaw index can be measured with magnetic resonance imaging (MRI) using the masseter muscle, but indistinct margins can lead to inaccuracy; the easily visualized posterior teeth buds may be a better landmark. OBJECTIVE: We aimed to evaluate inter-reader variability, agreement with ultrasound, and association with postnatal outcomes using MRI to measure the inferior facial angle, jaw index by masseter muscle, and jaw index by posterior teeth buds. MATERIALS AND METHODS: A single-institution retrospective review was performed of singleton pregnancies with prenatally diagnosed micrognathia by ultrasound or MRI from September 2013-June 2022. Ultrasound measurements were obtained by a maternal-fetal medicine specialist and MRI measurements by two radiologists to evaluate inter-reader variability. Intraclass correlation coefficients (ICC) and Bland-Altman analysis were used to assess agreement between imaging methods and logistic regressions and ROC curves to assess associations with postnatal outcomes. RESULTS: Forty-three fetuses (median gestational age 26 weeks (IQR 22-31); 47% male (20/43)) were included. Ultrasound measurements could not be obtained for jaw index in 15/43 (35%) fetuses and inferior facial angle in 11/43 (26%); MRI measurements were obtained by at least one reader in all cases. Jaw index by teeth buds demonstrated lowest inter-reader variability (ICC = 0.82, P < 0.001) and highest agreement with ultrasound (bias -0.23, 95% CI -2.8-2.2). All MRI measurements, but not ultrasound, predicted need for mandibular distraction (inferior facial angle P = 0.02, jaw index by masseter muscle P = 0.04, jaw index by teeth buds P = 0.01). CONCLUSION: Fetal MRI measurements, particularly jaw index measured by posterior teeth buds, demonstrate low inter-reader variability and high agreement with ultrasound, and may predict need for mandibular distraction postnatally.

Magnetic resonance imaging for jawbone assessment: a systematic review.

PURPOSE: To evaluate the accuracy of magnetic resonance imaging (MRI) for jawbone assessment compared to reference-standard measurements in the literature. MATERIALS AND METHODS: An electronic database search was conducted in PubMed, EMBASE, Scopus, Web of Science, and the Cochrane Library in June 2022, and updated in August 2023. Studies evaluating the accuracy of MRI for jawbone assessment compared with reference-standard measurements (histology, physical measurements, or computed tomography) were included. The outcome measures included bone histomorphometry and linear measurements. The risk of bias was assessed by the Quality Assessment Tool for Diagnostic Accuracy Studies (QUADAS-2). The review was registered in the PROSPERO database (CRD42022342697). RESULTS: From 63 studies selected for full-text analysis, nine manuscripts were considered eligible for this review. The studies included assessments of 54 participants, 35 cadavers, and one phantom. A linear measurement error ranging from 0.03 to 3.11 mm was shown. The accuracy of bone histomorphometry varies among studies. Limitations of the evidence included heterogeneity of MRI protocols and the methodology of the included studies. CONCLUSION: Few studies have suggested the feasibility of MRI for jawbone assessment, as MRI provides comparable results to those of standard reference tests. However, further advancements and optimizations are needed to increase the applicability, validate the efficacy, and establish clinical utility of these methods.

A cross-sectional study of the anatomy of the jaws of a central-European caucasian population using cone beam computer tomography as a prerequisite for designing pre-formed calcium phosphate cement scaffolds.

PURPOSE: This study aims to measure the cortical and cancellous bone thickness in the upper and lower jaws, serving as a data template for developing pre-defined calcium phosphate cement primary implant forms. These measurements are crucial for creating a biphasic scaffold. METHODS: Forty complete jaws were assessed for cortical bone shape and thickness using statistical analysis and specific software tools. Sex and age were considered, and four groups were created. RESULTS: The cumulative thickness of the cortical layer varied from region to region. In both the upper and lower jaws, the cortical layer in the molar region was significantly thicker than in the frontal region. Within the alveolar process, cortical thickness increases with distance from the alveolar crest on both sides. The oral side of the lower jaw is significantly thicker than the vestibular side. For the upper jaw, no significant differences between the oral and vestibular sides were found in this study. Additionally, it is noteworthy that men have a significantly thicker cortical layer than women. Regarding age, no significant overall differences were found. CONCLUSION: Mathematical analysis of anatomical forms using polynomial functions improves understanding of jaw anatomy. This approach facilitates the design of patient-specific scaffold structures, minimizing the need for costly and time-consuming planning and enabling more efficient implementation of optimal therapy.

Skull osteology, neuroanatomy, and jaw-related myology of the pig-nosed turtle Carettochelys insculpta (Cryptodira, Trionychia).

The osteology, neuroanatomy, and musculature are known for most primary clades of turtles (i.e., "families"), but knowledge is still lacking for one particular clade, the Carettochelyidae. Carettochelyids are represented by only one living taxon, the pig-nosed turtle Carettochelys insculpta. Here, we use micro-computed tomography of osteological and contrast-enhanced stained specimens to describe the cranial osteology, neuroanatomy, circulatory system, and jaw musculature of Carettochelys insculpta. The jaw-related myology is described in detail for the first time for this taxon, including m. zygomaticomandibularis, a muscular unit only found in trionychians. We also document a unique arterial pattern for the internal carotid artery and its subordinate branches and provide an extensive list of osteological ontogenetic differences. The present work provides new insights into the craniomandibular anatomy of turtles and will allow a better understanding of the evolutionary history of the circulatory system of trionychians and intraspecific variation among turtles.

Inflammatory Lesions of the Jaws.

This article defines the fascial and spatial anatomy of the suprahyoid neck region, delineates the role of CT and MR imaging, discusses the inflammatory conditions of the jaws and adjacent spaces and their clinical symptomatology, and illustrates the appearance of these conditions.

Utility of Panoramic Radiographs in the Screening of Individuals with Edentulous Arches: A Need-Analysis Study

Abstract Objective: To evaluate the utility of panoramic radiographs in pre-prosthetic screening of edentulous arches. Material and Methods: Panoramic radiographs taken for three years were retrospectively analyzed. Observations from the radiographs shall be categorized and classified into either of the two categories, namely: 'findings with minimal impact on denture fabrication' and 'findings which affect denture fabrication and require further evaluation.' Anatomic variations, jaw pathologies, and residual ridge resorption patterns were assessed. Results: This study included the initial screening of 23,020 panoramic radiographs, out of which 505 (showing either one or both edentulous arches) were included for the study purpose. The age range of the subjects was from 21 to 94 years. 52.6% of the radiographs showed positive findings. More than half of the radiographs belonged to the males (52.5%). Hyperpneumatization of the maxillary sinus, crestal position of the mental foramen, and retained root fragments were the most common entities noted in the radiographs. Changes in the mental foramen were significantly higher in males than females (p=0.002). Conclusion: Observations from this study showed that panoramic radiographs have high utility for screening edentulous arches, and they should be used in routine clinical practice before denture fabrication.

Kinematics of lateral tongue-pushing movement in coordination with masticatory jaw movement: An anteroposterior projection videofluorographic study.

OBJECTIVE: During the mastication of solid food, the tongue pushes the bolus laterally to place it onto occlusal surfaces as the jaw is opened. This movement is referred to as tongue-pushing (TP). TP has an important role in efficient chewing, but its kinematic mechanisms remain unclear. The present study quantified the kinematics of TP and its coordination with masticatory jaw movements. METHODS: Videofluorography (VFG) in anteroposterior projection was recorded while 14 healthy young adults ate 6 g each of cookies and meat. Small lead markers were glued to the tongue surface (left, right, and anterior) and buccal tooth surfaces (upper molars and lower canines). The position of the tongue and lower canine markers relative to the upper occlusal plane was quantified with Cartesian coordinates, using the right upper molar as the origin. Jaw motion during chewing was divided into TP and Non-TP cycles, based on the lateral movement of the food and tongue markers. The side of the jaw that compressed food particles was defined as the working side, while the other side was termed the balancing side. Horizontal and vertical displacements of tongue and jaw markers were compared between TP and Non-TP cycles, as well as between food types. RESULTS: The mediolateral displacement of all tongue markers was significantly larger in TP than in Non-TP cycles. Vertical displacement was also significantly greater in TP than in Non-TP cycles for the anterior and working side tongue markers. TP cycles occurred more frequently with meat-chewing than with cookie-chewing. CONCLUSION: TP is accomplished by rotation and lateral movements of the tongue surface on the working side and the anterior tongue blade, along with medial movement on the balancing side. These movements produce lateral shift and rotation of the tongue surface toward the working side in concert with jaw opening. Designing exercises to improve the strength of the lateral motion and rotation of the tongue body may be useful for individuals with impaired tongue function for eating and swallowing.

Radiologic findings of osteonecrosis, osteoradionecrosis, osteomyelitis and jaw metastatic disease with cone beam CT.

PURPOSE: The purpose of this study was to assess CBCT scans of patients with medication related osteonecrosis of the jaws (MRONJ), osteoradionecrosis (ORN), osteomyelitis (OM) and jaw metastatic disease (JM), evaluate the presence and extent of radiologic findings, identify radiologic parameters that may distinguish the four entities and last, introduce a new modified radiographic index (CRIm), in order to contribute to the diagnosis of these conditions. METHODS: Τwo major databases were retrospectively searched for fully documented and diagnosed CBCT scans of MRONJ, ORN, OM and JM from 2006 to 2019. 335 CBCT scans met the inclusion criteria and were assessed under standardized viewing conditions blindly by 2 observers. The CRIm index proposed in this study evaluates: lytic changes, sclerosis, periosteal bone formation, sequestration, non-healing extraction sockets and other findings which included: sinus implication, inferior alveolar canal implication and jaw fracture. Lytic changes, sclerosis, periosteal bone formation, sequestration and non-healing extraction sockets were scored as: absent (0), localized/single (1) and extensive/multiple (2). Each one of other findings were scored individually as: absent (0) and present (1). For statistical analysis t-test, Pearson's r correlation coefficient, one-way ANOVA and Bonferonni were performed. RESULTS: Extensive lytic changes were the most common finding, especially for ORN, where it occurred in all CBCT scans (100%). The mean value of the CRIm index differs significantly between CBCT scans with MRONJ and JM, as well as between those with OM and JM (Bonferroni p < 0.001). CONCLUSIONS: The new modified Composite Radiographic Index introduced in this study, appears to have improved an objective approach to the previously used Composite Radiographic Index by means of cumulative radiologic features. Τhe predominance of certain radiologic features in one or more of these entities may lead the diagnostician towards the correct diagnosis.

Comparative anatomy and functional implications of variation in the buccal mass in coleoid cephalopods.

In contrast to the well-studied articulated vertebrate jaws, the structure and function of cephalopod jaws remains poorly known. Cephalopod jaws are unique as the two jaw elements do not contact one another, are embedded in a muscular mass and connected through a muscle joint. Previous studies have described the anatomy of the buccal mass muscles in cephalopods and have proposed variation in muscle volume depending on beak shape. However, the general structure of the muscles has been suggested to be similar in octopuses, squids, and cuttlefish. Here we provide a quantitative analysis of the variation in the buccal mass of coleoids using traditional dissections, histological sections and contrast-enhanced computed tomography scans. Our results show that the buccal mass is composed of four main homologous muscles present in both decapodiforms and octopodiforms as suggested previously. However, we also report the presence of a muscle uniquely present in octopodiforms (the postero-lateral mandibular muscle). Our three dimensional reconstructions and quantitative analyses of the buccal mass muscles pave the way for future functional analyses allowing to better model jaw closing in coleoids. Finally, our results suggest differences in beak and muscle function that need to be validated using future in vivo functional analyses.

Radiological aspects of lymphomas and leukaemias affecting the jaws: A systematic review.

BACKGROUND: This systematic review aimed to investigate the radiological features of lymphomas and leukaemias affecting the jaws. METHODS: A systematic literature review was conducted using the electronic databases of PubMed, Web of Science and Scopus. Articles that contained sufficient radiographic examinations (periapical, panoramic or computed tomography images) for individual cases were included. Additionally, either immunohistochemical or molecular confirmation was required prior to inclusion. Three authors evaluated and described the image quality and radiological features. RESULTS: From an initial 1079 articles screened, 129 cases were included, containing 88 tomographic, 76 panoramic and 26 periapical examinations. The quality of the majority of images was sufficient for evaluation. Diffuse large B-cell lymphoma, Burkitt lymphoma, leukemic infiltration, plasmablastic lymphoma and extranodal Natural killer (NK)/T-cell lymphoma, nasal type were the most common subtypes. Involved teeth presented with mobility in 37.2% of the cases and a provisional diagnosis of inflammatory/infectious dental disease was considered in 49.2% of cases. Computed tomography exams were available for 76% of the cases, with most presented with an osteolytic lesion with ill-defined borders. Periosteal reactions were uncommon. CONCLUSION: Lymphoma/leukaemia infiltrates of the jaw bones are usually of high-grade subtypes and rarely present with periosteal reactions.

Radiomics in bone pathology of the jaws.

OBJECTIVE: To define which are and how the radiomics features of jawbone pathologies are extracted for diagnosis, predicting prognosis and therapeutic response. METHODS: A comprehensive literature search was conducted using eight databases and gray literature. Two independent observers rated these articles according to exclusion and inclusion criteria. 23 papers were included to assess the radiomics features related to jawbone pathologies. Included studies were evaluated by using JBI Critical Appraisal Checklist for Analytical Cross-Sectional Studies. RESULTS: Agnostic features were mined from periapical, dental panoramic radiographs, cone beam CT, CT and MRI images of six different jawbone alterations. The most frequent features mined were texture-, shape- and intensity-based features. Only 13 studies described the machine learning step, and the best results were obtained with Support Vector Machine and random forest classifier. For osteoporosis diagnosis and classification, filtering, shape-based and Tamura texture features showed the best performance. For temporomandibular joint pathology, gray-level co-occurrence matrix (GLCM), gray level run length matrix (GLRLM), Gray Level Size Zone Matrix (GLSZM), first-order statistics analysis and shape-based analysis showed the best results. Considering odontogenic and non-odontogenic cysts and tumors, contourlet and SPHARM features, first-order statistical features, GLRLM, GLCM had better indexes. For odontogenic cysts and granulomas, first-order statistical analysis showed better classification results. CONCLUSIONS: GLCM was the most frequent feature, followed by first-order statistics, and GLRLM features. No study reported predicting response, prognosis or therapeutic response, but instead diseases diagnosis or classification. Although the lack of standardization in the radiomics workflow of the included studies, texture analysis showed potential to contribute to radiologists' reports, decreasing the subjectivity and leading to personalized healthcare.

Open-Full-Jaw: An open-access dataset and pipeline for finite element models of human jaw.

BACKGROUND: State-of-the-art finite element studies on human jaws are mostly limited to the geometry of a single patient. In general, developing accurate patient-specific computational models of the human jaw acquired from cone-beam computed tomography (CBCT) scans is labor-intensive and non-trivial, which involves time-consuming human-in-the-loop procedures, such as segmentation, geometry reconstruction, and re-meshing tasks. Therefore, with the current practice, researchers need to spend considerable time and effort to produce finite element models (FEMs) to get to the point where they can use the models to answer clinically-interesting questions. Besides, any manual task involved in the process makes it difficult for the researchers to reproduce identical models generated in the literature. Hence, a quantitative comparison is not attainable due to the lack of surface/volumetric meshes and FEMs. METHODS: We share an open-access repository composed of 17 patient-specific computational models of human jaws and the utilized pipeline for generating them for reproducibility of our work. The used pipeline minimizes the required time for processing and any potential biases in the model generation process caused by human intervention. It gets the segmented geometries with irregular and dense surface meshes and provides reduced, adaptive, watertight, and conformal surface/volumetric meshes, which can directly be used in finite element (FE) analysis. RESULTS: We have quantified the variability of our 17 models and assessed the accuracy of the developed models from three different aspects; (1) the maximum deviations from the input meshes using the Hausdorff distance as an error measurement, (2) the quality of the developed volumetric meshes, and (3) the stability of the FE models under two different scenarios of tipping and biting. CONCLUSIONS: The obtained results indicate that the developed computational models are precise, and they consist of quality meshes suitable for various FE scenarios. We believe the provided dataset of models including a high geometrical variation obtained from 17 different models will pave the way for population studies focusing on the biomechanical behavior of human jaws.

Three-dimensional ultrasound imaging of the jawbone for ridge width determination: A pre-clinical ex-vivo porcine study.

OBJECTIVE: Two-dimensional (2D) ultrasound can conveniently evaluate focal regions of interest intraorally. When a larger field of view to spatially reference remote anatomical structures is needed, 3D ultrasound (US) is desirable but not currently available. The aim of this study was to demonstrate the feasibility of constructing 3D US jawbone for ridge width determination. METHODS: Seven porcine hemi-mandibles with the overlying soft tissues secured by a holding frame with fiducial markers were US scanned on the facial and lingual sides separately.  The facial and lingual volumes were combined into a single volume, which was registered with the matched cone beam computed tomography (CBCT) scan.  On 8 to 11 cross-sections, 4 measurements of the facio-lingual ridge width at 3, 6, 9 and 12 mm from the bone crest were performed by two calibrated examiners.  A mixed model was used to estimate the differences between US and CBCT readings. RESULTS: Inter-examiner correlation was 0.978 and 0.987 for US and CBCT measurements, respectively. The ICCs between the US and CBCT was between 0.890 and 0.988 at the defined sites. The estimated mean differences ranged from -0.38 ± 0.69 (95% CI: -0.66 to -0.11) mm to 0.07 ± 0.93 (95% CI: -0.23 to 0.38) mm. The normalized root mean square deviation ranged between 4.50% and 7.89% for all levels except the 3 mm level, which ranged between 5.51% (in molars) and 11.16% (in premolars). CONCLUSIONS: This study demonstrates the feasibility of generating US jawbone in 3D for ridge width measurements. CLINICAL SIGNIFICANCE: Commonly applied 2D ultrasound images are limited by a small field of view and an unknown coordinate system due to the nature of free hand scans. Novel 3D ultrasound acquisition enables referencing anatomical structures in a larger field of view and could become a promising tool to supplement CBCT.

Beyond the Edge: Markerless Pose Estimation of Speech Articulators from Ultrasound and Camera Images Using DeepLabCut.

Automatic feature extraction from images of speech articulators is currently achieved by detecting edges. Here, we investigate the use of pose estimation deep neural nets with transfer learning to perform markerless estimation of speech articulator keypoints using only a few hundred hand-labelled images as training input. Midsagittal ultrasound images of the tongue, jaw, and hyoid and camera images of the lips were hand-labelled with keypoints, trained using DeepLabCut and evaluated on unseen speakers and systems. Tongue surface contours interpolated from estimated and hand-labelled keypoints produced an average mean sum of distances (MSD) of 0.93, s.d. 0.46 mm, compared with 0.96, s.d. 0.39 mm, for two human labellers, and 2.3, s.d. 1.5 mm, for the best performing edge detection algorithm. A pilot set of simultaneous electromagnetic articulography (EMA) and ultrasound recordings demonstrated partial correlation among three physical sensor positions and the corresponding estimated keypoints and requires further investigation. The accuracy of the estimating lip aperture from a camera video was high, with a mean MSD of 0.70, s.d. 0.56 mm compared with 0.57, s.d. 0.48 mm for two human labellers. DeepLabCut was found to be a fast, accurate and fully automatic method of providing unique kinematic data for tongue, hyoid, jaw, and lips.

Radiolucent Lesions of the Jaws: An Attempted Demonstration of the Use of Co-Word Analysis to List Main Similar Pathologies.

(1) Background: Many radiolucent jaw lesions exist, and they often show a radiographic resemblance, rendering diagnosis a challenging act. Closely related lesions should be frequently mentioned together in the academic literature, which might be helpful for junior practitioners in determining their differential diagnosis. The usefulness of bibliometric analysis in this respect has yet to be demonstrated. (2) Methods: This study evaluated academic publications on radiolucent jaw lesions, as indexed by the Web of Science Core Collection database. The mentions of radiolucent jaw lesions were extracted from the complete bibliographic records of the publications, and co-word analyses were conducted with the aid of VOSviewer. (3) Results: Based on 1897 papers, visualization maps were synthesized to evaluate co-occurrences of the radiolucent jaw lesions. Ameloblastoma was frequently mentioned together with odontogenic keratocyst, dentigerous cyst, and radicular cyst. Osseous dysplasia was co-mentioned with osteomyelitis, ossifying fibroma, odontoma, fibrous dysplasia, and apical periodontitis. (4) Conclusions: The co-word analysis, a form of bibliometric analysis, could demonstrate a relatedness of radiolucent jaw lesions that could be considered at differential diagnosis.

Craniofacial and Craniocervical Features in Cartilage-Hair Hypoplasia: A Radiological Study of 17 Patients and 34 Controls.

Background: Biallelic mutations in the non-coding RNA gene RMRP cause Cartilage-hair hypoplasia (CHH), a rare skeletal dysplasia in which the main phenotypic characteristic is severe progressive growth retardation. Objective: This study compared the cranial dimensions of individuals with CHH to healthy subjects. Methods: Lateral skull radiographs of 17 patients with CHH (age range 10 to 59 years) and 34 healthy individuals (age range 10 to 54 years) were analyzed for relative position of the jaws to skull base, craniofacial height and depth, as well as vertical growth pattern of the lower jaw, anterior cranial base angle, and the relationship between the cervical spine and skull base. Results: We found that the length of the upper and lower jaws, and clivus were significantly decreased in patients with CHH as compared to the controls. Anterior cranial base angle was large in patients with CHH. Basilar invagination was not found. Conclusion: This study found no severe craniofacial involvement of patients with CHH, except for the short jaws. Unexpectedly, mandibular deficiency did not lead to skeletal class II malocclusion. Clinical Impact: Although the jaws were shorter in patients with CHH, they were proportional to each other. A short posterior cranial base was not associated with craniocervical junction pathology.