Optical tuning of copolymer-in-oil tissue-mimicking materials for multispectral photoacoustic imaging.

Objective. The availability of tissue-mimicking materials (TMMs) for manufacturing high-quality phantoms is crucial for standardization, evaluating novel quantitative approaches, and clinically translating new imaging modalities, such as photoacoustic imaging (PAI). Recently, a gel comprising the copolymer styrene-ethylene/butylene-styrene (SEBS) in mineral oil has shown significant potential as TMM due to its optical and acoustic properties akin to soft tissue. We propose using artists' oil-based inks dissolved and diluted in balsam turpentine to tune the optical properties.Approach. A TMM was fabricated by mixing a SEBS copolymer and mineral oil, supplemented with additives to tune its optical absorption and scattering properties independently. A systematic investigation of the tuning accuracies and relationships between concentrations of oil-based pigments and optical absorption properties of the TMM across visible and near-infrared wavelengths using collimated transmission spectroscopy was conducted. The photoacoustic spectrum of various oil-based inks was studied to analyze the effect of increasing concentration and depth.Main results. Artists' oil-based inks dissolved in turpentine proved effective as additives to tune the optical absorption properties of mineral oil SEBS-gel with high accuracy. The TMMs demonstrated long-term stability and suitability for producing phantoms with desired optical absorption properties for PAI studies.Significance. The findings, including tuning of optical absorption and spectral shape, suggest that this TMM facilitates the development of more sophisticated phantoms of arbitrary shapes. This approach holds promise for advancing the development of PAI, including investigation of the spectral coloring effect. In addition, it can potentially aid in the development and clinical translation of ultrasound optical tomography.

Biophysical impact of lubricating base oil aerosols on natural pulmonary surfactant film.

Lubricating base oils have been extensively employed for producing various industrial and consumer products. Therefore, their environmental and health impacts should be carefully evaluated. Although there have been many reports on pulmonary cytotoxicity and inflammatory responses of inhaled lubricating base oils, their potential influences on pulmonary surfactant (PS) films that play an essential role in maintaining respiratory mechanics and pulmonary immunity remains largely unknown. Here a systematic study on the interactions between an animal-derived natural PS and aerosols of water and representative mineral and vegetable base oils is performed using a novel biophysical assessing technique called constrained drop surfactometry capable of providing in vitro simulations of normal tidal breathing and physiologically relevant temperature and humidity in the lung. It was found that the mineral oil aerosols can impose strong inhibitions to the biophysical property of PS film, while the airborne vegetable oils and water show negligible adverse effects within the studied concentration range. The inhibitory effect is originated from the strong hydrophobicity of mineral oil, which makes it able to disrupt the interfacial molecular ordering of both phospholipid and protein compositions and consequently suppress the formation of condensed phase and multilayer scaffolds in a PS film. ENVIRONMENTAL IMPLICATION: Understanding the biophysical influence of airborne lubricating base oils on pulmonary surfactant (PS) films can provide new insights into the environmental impacts and health concerns of various industrial lubricant products. Here a comparative study on interactions between an animal-derived natural PS film and the aerosols of water and representative mineral and vegetable base oils under the true physiological conditions was conducted in situ using constrained drop surfactometry. We show that the most frequently used mineral base oil can cause strong inhibitions to the PS film by disrupting the molecular ordering of saturated phospholipids and surfactant-associated proteins at the interface.

Improved microwave-assisted saponification to reduce the variability of MOAH determination in edible oils.

BACKGROUND: Mineral oil aromatic hydrocarbon (MOAH) analysis in foods is a major analytical challenge. Quantification is associated with a high uncertainty. The sources of uncertainty are multiple, but the major one is related to data interpretation and integration, which is partially derived from insufficiently efficient sample preparation. Recently, an updated ISO method for the analysis of mineral oil in fats and oils and a standard operating procedure for infant formula analysis have been published. Both methods reported significantly different (up to 1.25) distributions of the internal standards used for quantification (i.e., tri-tert-butyl benzene (TBB) and 2-methyl naphthalene (2-MN)) over the different solvent phases used in the saponification step. RESULTS: In this work, a microwave-assisted saponification and extraction method was optimized for MOAH analysis to solve the problem related to the MOAH internal standards partition. The paper examines the impact of the solvent mixture used, the concentration of KOH on the partition of TBB and 2-MN, and the effect of the matrix and the washing step to extract the unsaponifiable fraction containing the mineral oils. SIGNIFICANCE: The optimized procedure achieved a TBB/2-MN ratio of 1.05 ± 0.01 tested in five different fats and oils, namely, sunflower, rapeseed, coconut, palm, and extra virgin olive oils. The method can significantly contribute to reducing the uncertainty of the MOAH quantification when saponification is applied.

Review on Cutting Fluids: Formulation, Chemistry and Deformulation.

This comprehensive review offers a chemical analysis of cutting fluids, delving into both their formulation and deformulation processes. The study covers a wide spectrum of cutting fluid formulations, ranging from simple compositions predominantly comprising oils, whether mineral or vegetable, to emulsions. The latter involves the integration of surfactants, encompassing both nonionic and anionic types, along with a diverse array of additives. Concerning oils, the current trend leans towards the use of vegetable oils instead of mineral oils for environmental reasons. As vegetable oils are more prone to oxidation, chemical alterations, the addition of antioxidant may be necessary. The chemical aspects of the different compounds are scrutinized, in order to understand the role of each component and its impact on the fluid's lubricating, cooling, anti-wear, and anti-corrosion properties. Furthermore, the review explores the deformulation methodologies employed to dissect cutting fluids. This process involves a two-step approach: separating the aqueous and organic phases of the emulsions by physical or chemical treatments, and subsequently conducting a detailed analysis of each to identify the compounds. Several analytical techniques, including spectrometric or chromatographic, can be employed simultaneously to reveal the chemical structures of samples. This review aims to contribute to the improvement of waste treatment stemming from cutting fluids. By gathering extensive information about the formulation, deformulation, and chemistry of the ingredients, there is a potential to enhance the waste management and disposal effectively.

Comparison of carrier gases for the separation and quantification of mineral oil hydrocarbon (MOH) fractions using online coupled high performance liquid chromatography-gas chromatography-flame ionisation detection.

On-line coupled high performance liquid chromatography-gas chromatography-flame ionisation detection (HPLC-GC-FID) was used to compare the effect of hydrogen, helium and nitrogen as carrier gases on the chromatographic characteristics for the quantification of mineral oil hydrocarbon (MOH) traces in food related matrices. After optimisation of chromatographic parameters nitrogen carrier gas exhibited characteristics equivalent to hydrogen and helium regarding requirements set by current guidelines and standardisation such as linear range, quantification limit and carry over. Though nitrogen expectedly led to greater peak widths, all required separations of standard compounds were sufficient and humps of saturated mineral oil hydrocarbons (MOSH) and aromatic mineral oil hydrocarbons (MOAH) were appropriate to enable quantitation similar to situations where hydrogen or helium had been used. Slightly increased peak widths of individual hump components did not affect shapes and widths of the MOSH and MOAH humps were not significantly affected by the use of nitrogen as carrier gas. Notably, nitrogen carrier gas led to less solvent peak tailing and smaller baseline offset. Overall, nitrogen may be regarded as viable alternative to hydrogen or helium and may even extend the range of quantifiable compounds to highly volatile hydrocarbon eluting directly after the solvent peak.

Comparative study on alginate/chitosan microcapsules and Montanide ISA 61 as vaccine adjuvants in mice.

Selection of adjuvant to be combined with the antigen is an extremely important point for formulating effective vaccines. The aim of this study was to evaluate reactogenicity, levels of IgM, IgG and subclasses (IgG1, IgG2b and IgG3), and protection elicited by vaccine formulations with association of chitosan coated alginate or Montanide ISA 61 with γ-irradiated Brucella ovis. The alginate/chitosan biopolymers as well as the Montanide ISA 61 emulsion elicited intense and long-lasting local response, especially when associated with the antigen. However, Montanide ISA 61 induced less intense reactogenicity when compared to alginate/chitosan. Furthermore, γ-irradiated B. ovis with Montanide ISA 61 induced higher levels of IgG2b an important marker of cellular immune response. In conclusion, Montanide ISA 61 resulted in milder reactogenicity when compared to the alginate/chitosan, while it induced a high IgG2b/IgG1 ratio compatible with a Th1 profile response.

[Molding matrix formulation of hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine preparations].

This study aims to optimize the matrix formulation for the hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine(TCM) preparations and verify the applicability of the formulation. The central composite design in JMP Pro 16.1.0 was employed to optimize the dosages of styrene-isoprene-styrene triblock copolymer(SIS), hydrogenated petroleum resin, and lightweight liquid paraffin, with the fine powder of Yipifang as the model drug(drug loading of 10%) and the sensory score and objective evaluation as the comprehensive evaluation indicators. The quality evaluation system of hot-melt pressure-sensitive adhesive plaster of personalized TCM preparations was established. The applicability of the optimized matrix formulation of hot-melt pressure-sensitive adhesive plaster was verified with 16 TCM preparations for external application. Furthermore, the applicability of the matrix formulation was investigated with different drug loadings. The general molding matrix formulation was SIS∶hydrogenated petroleum resin∶lightweight liquid paraffin 3∶3∶5. The optimized matrix formulation showed good molding properties and high quality scores for 16 TCM preparations and were suitable for the plastering of finely powdered decoction pieces with a loading capacity of 10% to 30%. The results suggest that the optimized matrix formulation has good applicability and is suitable for TCM preparations. The findings lay a foundation for the application and promotion of the hot-melt pressure-sensitive adhesive plasters of personalized TCM preparations.

Cadaver preservative properties of a solution composed of honey, ethyl alcohol, liquid paraffin, distilled water and citric acid: Experiments on rabbit cadavers.

The objective of this study is to assess the efficacy of a solution including honey, ethyl alcohol, liquid paraffin, distilled water and citric acid (HEFS) as a preservative for rabbit cadavers, serving as a potential substitute for formaldehyde. The cadavers underwent preservation using three distinct solutions: 10% formalin, 35% alcohol and HEFS. The cadavers were subjected to a total of four sampling events, occurring at 4-month intervals, in order to collect specimens for microanatomical, histological, microbiological, mycological, colourimetric, texture and odour analysis. In terms of hardness, suitability for dissection and joint mobility metrics, the cadavers fixed with HEFS had superior qualities to those fixed with formalin. The fixation quality of HEFS for histological analyses was deemed acceptable, except kidney and intestinal tissues. In texture analysis, differences only in the elasticity parameter (p < 0.05) in the same sampling period. A total of 10 (13.9) bacteria isolates were identified among which, Metasolibacillus meyeri 3 (30%) was predominantly followed by Staphylococcus aureus 2 (20%), Bacillus siamensis, Bacillus subtilis, Pseudarthrobacter oxydans, Bacillus licheniformis, Bacillus subtilis subsp. subtilis with a proportion of 1 (10%), respectively, by both microbiological and molecular analysis. However, no anaerobic bacteria and fungi were isolated. A considerable percentage of the students had the perception that HEFS was appropriate for utilization in laboratory settings due to its absence of unpleasant odours and detrimental impact on ocular and respiratory functions. In conclusion, we consider that HEFS may serve as a viable substitute for formalin solution in the preservation of rabbit cadavers.

Lipoid pneumonia induced by aspiration of liquid paraffin.

INTRODUCTION: This case report describes a case of exogenous lipoid pneumonia (ELP) resulting from the inhalation of a lipoid substance. Lipoid pneumonia, also known as cholesterol pneumonia or golden pneumonia, is an uncommon inflammatory lung disease characterized by the presence of lipid-laden macrophages in the alveolar walls and lung interstitial tissue. Exogenous lipoid pneumonia occurs when substances containing lipids enter the airways through aspiration or inhalation, triggering an inflammatory response. CASE REPORT: The patient in this case study was an 83-year-old woman with hypertension and diabetes mellitus who had been using paraffin oil as a mouthwash for an extended period. The diagnosis of exogenous lipoid pneumonia was established based on the patient's history of exposure to liquid paraffin oil, typical radiological findings, and histopathological examination.

Adjuvant screening of the Senecavirus A inactivated vaccine in mice and evaluation of its immunogenicity in pigs.

BACKGROUND: Senecavirus A (SVA) causes an emerging vesicular disease (VD) with clinical symptoms indistinguishable from other vesicular diseases, including vesicular stomatitis (VS), foot-and-mouth disease (FMD), and swine vesicular disease (SVD). Currently, SVA outbreaks have been reported in Canada, the U.S.A, Brazil, Thailand, Vietnam, Colombia, and China. Based on the experience of prevention and control of FMDV, vaccines are the best means to prevent SVA transmission. RESULTS: After preparing an SVA inactivated vaccine (CH-GX-01-2019), we evaluated the immunogenicity of the SVA inactivated vaccine mixed with Imject® Alum (SVA + AL) or Montanide ISA 201 (SVA + 201) adjuvant in mice, as well as the immunogenicity of the SVA inactivated vaccine combined with Montanide ISA 201 adjuvant in post-weaned pigs. The results of the mouse experiment showed that the immune effects in the SVA + 201 group were superior to that in the SVA + AL group. Results from pigs immunized with SVA inactivated vaccine combined with Montanide ISA 201 showed that the immune effects were largely consistent between the SVA-H group (200 µg) and SVA-L group (50 µg); the viral load in tissues and blood was significantly reduced and no clinical symptoms occurred in the vaccinated pigs. CONCLUSIONS: Montanide ISA 201 is a better adjuvant choice than the Imject® Alum adjuvant in the SVA inactivated vaccine preparation, and the CH-GX-01-2019 SVA inactivated vaccine can provide effective protection for pigs.

Frequent oil baths and skin barrier during infancy in the PreventADALL study.

BACKGROUND: In the general population randomized controlled trial PreventADALL, frequent emollient bath additives from 2 weeks of age did not prevent atopic dermatitis, while the effect on skin barrier function throughout infancy is not established. OBJECTIVES: The primary aim of this exploratory substudy was to assess the effect of mineral-based oil baths on transepidermal water loss (TEWL) and dry skin through infancy, and secondarily to explore if filaggrin (FLG) mutations modified the effect. METHODS: Overall, 2153 infants were included and randomized to either the 'Skin intervention' (SI) group (n = 995) (oil bath 4 times weekly from 2 weeks through 8 months) or 'No skin intervention' (NSI) group (n = 1158), with TEWL measurements at 3, 6 and/or 12 months of age. Information on FLG mutation status was available for 1683 of these infants. Effects of the skin intervention on TEWL and dry skin through infancy were assessed by mixed-effects regression modelling. Background characteristics and protocol adherence were collected from electronic questionnaires, birth records and weekly diaries. RESULTS: The TEWL (95% confidence interval) was on average 0.42 g m-2 h-1 (0.13-0.70, P = 0.004) higher in the SI group compared with the NSI group through the first year of life, with significantly higher levels at 3 months [8.6 (8.3-9.0) vs. 7.6 (7.3-7.9)], but similar at 6 and 12 months. Dry skin was observed significantly more often in the NSI group compared with the SI group at 3 months (59% vs. 51%) and at 6 months of age (63% vs. 53%), while at 12 months of age, the difference was no longer significant. At 3 months, the TEWL of FLG mutation carriers was similar to the TEWL in the SI group. No interaction between SI and FLG mutation was found in the first year of life. CONCLUSIONS: Infants given frequent oil baths from 2 weeks of age had reduced skin barrier function through infancy compared with controls, largely attributed to higher TEWL at 3 months of age, while the skin at 3 and 6 months appeared less dry in infants subjected to the skin intervention.

Atopic dermatitis (AD) affects approximately 20% of children in industrialized countries. AD causes dry, itchy skin and can increase the chance of infections. This study was a substudy of the large Scandinavian PreventADALL trial, including 2394 infants, recruited from the general population between 2014 and 2016. Children in this trial were allocated randomly to receive either a skin intervention, food intervention, combined intervention, or no intervention. Children were examined at 3, 6 and 12 months of age. The examinations involved an investigation of the skin, to evaluate dry skin and skin barrier function by transepidermal water loss (TEWL) in the outer layers of the skin (higher TEWL suggests decreased skin barrier function). The skin intervention consisted of oil baths at least 4 times per week from 2 weeks of age through 8 months of age, and have previously not been shown to prevent AD by 1 and 3 years of age. We aimed to investigate whether frequent oil baths had any effect on TEWL and dry skin. We found that the skin intervention increased TEWL in the first year of life, especially at 3 months of age. Dry skin was less common in the skin intervention groups compared with the groups with no skin intervention. Infants with mutations in the gene coding for a skin barrier protein, called filaggrin, were associated with increased TEWL; however, in the skin intervention group, TEWL was similar among the infants with or without filaggrin mutations. Our findings suggest that oil baths several times per week from early infancy transiently decreases skin barrier function.

Electron microscopic observation of Mycobacterium avium subsp. paratuberculosis in cattle feces after a novel purification using liquid paraffin.

We developed a novel method for purifying acid-fast bacteria from feces. The method enabled the observation of characteristic clumps of Mycobacterium avium subsp. paratuberculosis (MAP) under electron microscopy by removing contaminants and other bacteria. Further refinement of this method will contribute to efficient and effective MAP detection.

Emollients in dermatological creams: Early evaluation for tailoring formulation and therapeutic performance.

The targeted choice of the emollient of a cream determines its physicochemical properties and clinical effectiveness. This work researched the effects of emollient properties on the final characteristics and potential performance of oil-in-water dermatological creams. Seven emollients with different chemical characteristics and structures (alkane, triglyceride, ether, silicone, vegetable oils, and mineral oil) were tested in a model formulation. Early stability, pH, droplet size distribution, rheology, tackiness, adhesivity, spreadability, tribology, and release profile of a lipophilic substance model (in Franz cells, through a synthetic membrane, for six hours) were assessed. The creams had acid epicutaneous pH and a "shear-thinning" "solid-like" viscoelastic behavior. Among the seven emollients' properties, polarity, density, and viscosity were the most influential. Droplet parameters were the most impacted, pH and release were moderately affected, and the textural properties were lowly to moderately impacted. The emollient substitution in the model formulation affected the experimental parameters differently, allowing formulation optimization and tailoring its potential therapeutic performance regarding drug release, coadjutant effects, and dwell time on the skin. By looking at the creams' characteristics, it was possible to select the best-suited emollients for releasing a lipophilic drug, applying on painful skin, and formulation in wash-off products or leave-on protective barrier creams.

Can humans smell tastants?

Although studies have shown that olfaction may contribute to the perception of tastant, literature is scarce or circumstantial, especially in humans. This study aims to (i) explore whether humans can perceive solutions of basic prototypical tastants through orthonasal and retronasal olfaction and (ii) to examine what volatile odor compounds (VOCs) underlie this ability. Solutions of 5 basic tastants (sucrose, sodium chloride, citric acid, monosodium glutamate [MSG], quinine) dissolved in water, and 2 fatty acids (oleic and linoleic acid) dissolved in mineral oil were prepared. Triangle discrimination tests were performed (n = 41 in duplicate) to assess whether the tastant solutions can be distinguished from blanks (solvents) through ortho- and retronasal olfaction. Participants were able to distinguish all tastant solutions from blank through orthonasal olfaction. Only sucrose, sodium chloride, oleic acid, and linoleic acid were distinguished from blank by retronasal olfaction. Ethyl dichloroacetate, methylene chloride, and/or acetone were identified in the headspace of sucrose, MSG, and quinine solutions but not in the headspace of water, sodium chloride, and citric acid solutions. Fat oxidation compounds such as alcohols and aldehydes were detected in the headspace of the oleic and linoleic acid solutions but not the mineral oil. We conclude that prototypical tastant solutions can be discriminated from water and fatty acid solutions from mineral oil through orthonasal olfaction. Differences in the volatile headspace composition between blanks and tastant solutions may have facilitated the olfactory discrimination. These findings can have methodological implications for future studies assessing gustatory perception using these prototypical taste compounds.

Advanced separation of mineral oil aromatic hydrocarbons by number of aromatic rings using donor-acceptor-complex chromatography to extend on-line coupled liquid chromatography-gas chromatography.

An automated implementation for a subfractionation of mineral oil aromatic hydrocarbons (MOAH) into a mono-/di-aromatic fraction (MDAF) and a tri-/poly-aromatic fraction (TPAF) is presented, which is highly demanded by the European Food Safety Authority (EFSA) respecting the genotoxic and carcinogenic potential of MOAH. For this, donor-acceptor-complex chromatography (DACC) was used as a selective stationary phase to extend the conventional instrumental setup for the analysis of mineral oil hydrocarbons via on-line coupled liquid chromatography-gas chromatography-flame ionization detection (LC-GC-FID). A set of six new internal standards was introduced for the verification of the MOAH fractionation and a quantification of MDAF and TPAF, respectively. The automated DACC approach was applied to representative petrochemical references as well as to food samples, such as rice and infant formula, generally showing well conformity with results obtained by state-of-the-art analysis using two-dimensional GC (GCxGC). Relative deviations of DACC/LC-GC-FID compared to GCxGC-FID methods regarding the ≥ 3 ring MOAH content ranged between -50 and +6 % (median: -2 %, all samples, only values above limit of quantification). However, crucial deviations mainly result from "border-crossing" substances, e.g., dibenzothiophenes or partially hydrogenated MOAH. These substances can cause overestimations of ≥ 3 ring MOAH fraction during GCxGC analysis due to co-elution, which is mostly avoided using the DACC approach. Furthermore, the DACC approach can help to minimize underestimations of toxicologically relevant ≥ 3 ring MOAH caused by an unavoidable loss of MOAH during epoxidation, since natural olefins, such as terpenes, predominantly elute in MDAF, which was exemplarily shown for an olive oil and a terpene reference. The presented approach can be implemented easily in existing LC-GC-FID setup for an automated and advanced screening of MOAH to lower the need for elaborate GCxGC analysis also in routine environments.

Characterization of oviduct epithelial spheroids for the study of embryo-maternal communication in cattle.

Most in vitro models of oviduct epithelial cells (OEC) used thus far to gain insights into embryo-maternal communication induce cell dedifferentiation or are technically challenging. Moreover, although the presence of developing embryos has been shown to alter gene expression in OEC, the effect of embryos on OEC physiology remains largely unknown. Here, we propose a model based on bovine oviduct epithelial spheroids (OES) with specific shape and diameter (100-200 µm) criteria. The aims of this study were to i) determine the appropriate culture conditions of bovine OES cultured in suspension by evaluating their morphology, total cell number, viability, and activity of ciliated cells; ii) monitor gene expression in OES at the time of their formation (day 0) and over the 10 days of culture; and iii) test whether the vicinity of developing embryos affects OES quality criteria. On day 10, the proportions of vesicle-shaped OES (V-OES) were higher in M199/500 (500 µl of HEPES-buffered TCM-199) and synthetic oviduct fluid (SOF)/25 (25-µL droplet of SOF medium under mineral oil) than in M199/25 (25-µL droplet of M199 under mineral oil). The proportion of viable cells in V-OES was not affected by culture conditions and remained high (>80%) through day 10. The total number of cells per V-OES decreased over time except in SOF/25, while the proportions of ciliated cells increased over time in M199/500 but decreased in M199/25 and SOF/25. The movement amplitude of OES in suspension decreased over time under all culture conditions. Moreover, the gene expression of ANXA1, ESR1, HSPA8, and HSPA1A in OES remained stable during culture, while that of PGR and OVGP1 decreased from day 0 to day 10. Last, the co-culture of developing embryos with OES in SOF/25 increased the rates of blastocysts on days 7 and 8 compared to embryos cultured alone, and increased the proportion of V-OES compared to OES cultured alone. In conclusion, M199/500 and SOF/25 provided the optimal conditions for the long-time culture of OES. The supporting effect of OES on embryo development and of developing embryos on OES morphology was evidenced for the first time. Altogether, these results point OES as an easy-to-use, standardizable, and physiological model to study embryo-maternal interactions in cattle.

Prediction of size-selective permitted daily exposures for mineral oil mist based on an in vitro study in different scenarios.

The incidence of DNA damage from exposure to specific types of metalworking fluids has been reported. In this research, size-selective permissible limits to prevent genotoxic damage in A549 cell lines exposed to two types of mineral oil were estimated for the first time using a benchmark dose approach and extrapolated to workers. The comet assay was performed based on Olive and Banath protocol to determine DNA damage. Then, the Benchmark Dose, the 95% lower bound confidence limit BMD, and the 95% upper-bound confidence limit BMD were determined using continuous response data. Finally, the four Benchmark Dose levels reported in the A549 cell line were extrapolated to the human population in occupational settings in two phases. This study showed when determining the permissible limits, the type used or unused, the type of injury, the organ affected in the body and the size of the particles should also be considered.

Efficiency of natural oils as alternative adjuvants to mineral oils in inactivated avian influenza vaccine formulation.

1. The effectiveness of inactivated vaccines depends on selecting the suitable adjuvant for vaccine formulation. The potency of vaccines with low antigen content can be improved with the appropriate adjuvant. This could allow production of more doses and lower the production cost.2. This study evaluated the efficiency of vaccines prepared using oil extracted from natural sources including argan oil, almond oil, sesame seed oil, pumpkin oil, cactus oil and black seed oil as alternative adjuvants for improving the protection capacity of inactivated influenza virus vaccine as compared to commonly used mineral oils.3. Each vaccine formulation was evaluated for stability, safety and immunogenicity in chickens, as well as for reducing the viral shedding after challenge infection.4. The cactus, sesame and pumpkin seed oil-based vaccines were found to be potent and successfully induced the production of humoral immunity in vaccinated chickens.

Liquid concrete as a gastrointestinal tract foreign body.

Gastrointestinal foreign bodies present a common clinical challenge. We present an unusual case of a 58-year-old construction worker who ingested liquid concrete that risked solidifying in his stomach. Gastroscopy revealed only partial solidification and pyloric obstruction, which were successfully resolved through endoscopic fragmentation and mechanical removal. To protect the gastric mucosa during elimination, liquid paraffin and a cellulose-based formula were administered. Complete gastrointestinal evacuation was achieved within 3 days, with no complications observed. This case emphasises the urgency of the early removal of concrete.