Establishing legal threshold of 18-years based on the assessment of mandibular molars using three different methods - An observational study.

BACKGROUND: The study evaluates the feasibility of employing the radiographic visibility of the root pulp and periodontal ligament in mandibular molars for age estimation, particularly focusing on the 18 years of age threshold. This study additionally investigates the potential of root canal width reduction in mandibular molars, as a reliable method for forensic age estimation in living individuals. MATERIALS AND METHODS: A cross-sectional study was conducted to assess the radiographic visibility of the root pulp (RPV) and the root canal width (RCW) of mandibular first, second, and third molars along with the radiographic visibility of the periodontal ligament (PLV) of mandibular third molars, in a sample of 403 individuals aged 16-25 years (220 males and 183 females). Data regarding age for different stages of RPV and PLV and various types of RCW were recorded and observed for sex-based differences. Results obtained were tabulated and descriptive statistics were applied to summarise the findings. RESULTS: Individuals over 18 years old were classified with higher accuracy using stage 3 of the RPV scoring system in all mandibular molars (first, second, and third) compared to stage 2, which was also effective for the second and third molars. This result held regardless of sex and side examined. Additionally, root canal width (RCW) assessment demonstrated that individuals with RCW types A, B, and C were more likely to be under 18 years old in both sexes. Conversely, individuals with RCW type U on the right side for males and the left side for females exhibited a higher likelihood of being above 18 years old. CONCLUSION: The study suggests that the assessment of mandibular molars could potentially serve as an auxiliary tool in age estimation methods, particularly for approximating individuals around the 18 years of age threshold. Further investigation is warranted to explore the potential application of root canal width measurements in forensic age estimation.

Cone beam computed tomography analysis of the root and canal morphology of the maxillary second molars in a Syrian subpopulation.

AIM: To investigate the root number and morphology of the maxillary second molars in the Syrian population besides bilateral symmetry, and the effect of gender. METHODS: 250 Cone Beam Computed Tomography (CBCT) images (140 females, 110 males) were examined by two endodontists. The detailed analysis included the number of roots, the number of canals and their configurations, bilateral symmetry, and relation to gender. The evaluation was made according to Vertucci classification by analyzing the CBCT images at all levels (Axial, Coronal, Sagittal, Oblique, and 3D). The Chi-square statistical analysis was performed to compare the canals' morphologies and bilateral symmetry in both genders via SPSS. RESULT: The most common shape of the upper second molars is three roots (90.4%). There were significant differences between males and females regarding the symmetry of the number of roots (P < 0.05). The root canal configuration was mainly Vertucci type I classification in the Distobuccally (93.4%) and palatal root (99.6%). The most common type in the mesial root was type I (29.5%), showing all varieties of Vertucci classifications (except VII, and VIII) percentage of MB2 of 70.5%. The ratio of symmetry was (59.6%) with no significant statistical difference between the genders (P = 0.708). CONCLUSION: Most maxillary second molars in the examined Syrian population were types (II) (associated with MB2 cases with three roots and four canals). In terms of symmetry, the number of roots surpassed the canal configuration. Males had a greater symmetrical tendency in the number of roots than females.

Evaluating the efficiency of mandibular molar protraction using Herbst appliances versus temporary anchorage devices: a retrospective case-controlled study.

BACKGROUND: Mandibular second premolar agenesis is a common problem in orthodontics and is often treated in conjunction with maxillary counterbalancing extractions. However, in cases without maxillary crowding or dental protrusion, space closure may pose challenges leading to compromised occlusal results or patient profile. Multiple techniques have been described to treat these patients; nevertheless, there is a paucity of data comparing effectiveness of space closure utilizing various anchorage techniques. The goal of this study is to assess the effectiveness of the Herbst device during mandibular molar protraction and compare it to the use of temporary anchorage device (TADs) in patients with mandibular second premolar agenesis. MATERIALS AND METHODS: This retrospective study included 33 patients with mandibular premolar agenesis treated without maxillary extractions. Of these patients, 21 were treated with protraction Herbst devices and 12 with TADs. Changes in molar and incisor positions, skeletal base positions and occlusal plane angulations were assessed on pretreatment (T0) and post-treatment (T1) lateral cephalograms. Scans/photographs at T0 and T1 were used to evaluate canine relationship changes representing anchorage control. Space closure and breakage/failure rates were also compared. Data was analyzed with paired and unpaired t-tests at the significance level of 0.05. RESULTS: Within the Herbst group, changes in mandibular central incisor uprighting and mandibular molar crown angulations were statistically significant. However, no significant differences were noted between the Herbst and TAD groups. Protraction rates as well as overall treatment times were comparable (0.77 mm/month vs. 0.55 mm/month and 3.02 years vs. 2.67 years, respectively). Canine relationships were maintained or improved toward a class I in 82.85% of the Herbst sample, compared to in 66.7% of the TAD sample. Emergency visits occurred in 80.1% of the Herbst group, with cementation failures or appliance breakages as the most common reasons. CONCLUSION: The Herbst device could be a viable modality in cases with missing mandibular premolars where maximum anterior anchorage is desired, or if patients/parents are resistant to TADs. Furthermore, they could be beneficial in skeletal class II patients with mandibular deficiency who also need molar protraction. However, the increased incidence of emergency visits must be considered when treatment is planned.

Wilson curve modification in permanent dentition: a retrospective comparison between clear aligners and continuous archwire treatment.

OBJECTIVES: To evaluate leveling of the Curve of Wilson (COW) by two different treatment appliances (clear aligners [CA] and continuous archwire fixed appliances [FA]) in a permanent dentition sample of patients. MATERIALS AND METHODS: Digital casts of 40 patients (CA group = 20 patients; FA group = 20 patients) were collected. Angular values for COW, right and left vertical height difference of lower first molars, and linear distance between lower teeth and the WALA ridge were analyzed for pre- (T1), posttreatment (T2) and on final virtual (ClinCheck) models (T2-CC) of the CA group. An unpaired t-test was used to evaluate significant intergroup differences (P < .05), while a paired t-test was used for posttreatment CA intragroup comparison. RESULTS: FA group showed better control of second molar crown positions compared to CA group (47-WALA = -0.2 ± 0.1 mm, 37-WALA = -0.6 ± 0.3 mm). No significant difference was detected for linear distance of lower first molars and the WALA ridge or for vertical height difference. CA group showed a greater reduction of distance between lower premolars and the WALA ridge (mean difference: -0.5 mm for both 45-WALA and 35-WALA; mean difference: -0.5 mm for 44-WALA, -0.6 mm for 34-WALA). Predictability for the CA group was high for every measurement (87% Right COW, 89% Left COW, 88% 46 Vertical Diff, 87% 36 Vertical Diff). CONCLUSIONS: Clear aligner and continuous archwire mechanics were effective in leveling COW. FA was more effective in changing crown position of lower second molars with respect to the WALA ridge, while CA provided a greater distance reduction between lower premolars and WALA ridges compared to FA.

Evaluation of maxillary dimensional changes in the mixed dentition: clear aligners vs acrylic expanders.

OBJECTIVES: To compare changes in upper arch dimension and molar inclination between Invisalign First (IF) and removable acrylic expander (RE) treatments during the mixed dentition period. MATERIALS AND METHODS: Seventeen patients meeting inclusion criteria underwent IF treatment and were age matched with a group that received treatment with a removable acrylic expander (RE). Intercanine width (ICW), intermolar width, arch depth, buccolingual inclination of the first molars (MI), surface area (SA) and volume (VAP) of the anterior palate, and expansion were compared before and after treatment. The predictability of expansion was calculated for the IF group. Analysis of variance and Kruskal-Wallis tests were used to assess differences. RESULTS: The ICW increased significantly by 2.14 mm in the IF group and 3.49 mm in the RE group, with no significant intergroup difference. Both groups exhibited significant increases in intermolar width (P < .05), except for intermolar distopalatal width in the IF group (P = .246). Mesiobuccal rotation of the first molar was observed with IF treatment. Although SA and VAP increased in both groups, the changes were not significant for the IF group (P > .05). The RE group exhibited significantly higher increases (P < .05), with an SA increase of 34.32 mm2 and VAP increase of 119.15 mm3. MI changes were in the opposite directions. The prediction accuracy of expansion was 70.28% for canines and 34.12% for first molars. CONCLUSIONS: Both appliances effectively expanded the intercanine region in growing patients. Expansion predictability was lower in first molars than in canines for the IF group. Removable acrylic expanders could be a choice of preference for expansion targeted to the molar region.

Effects of transpalatal arch wire dimension and temporary skeletal anchorage device position on maxillary molar intrusion.

OBJECTIVES: To investigate the effects of transpalatal (TPA) wire dimension and temporary skeletal anchorage device (TSAD) position on maxillary molar intrusion. MATERIALS AND METHODS: The maxillary molar intrusion measurement system included a maxillary acrylic model, TPA, TSADs, and a three-dimensional Force/Moment (F/M) sensor. The intrusion patterns were categorized into six groups: buccal-mesial, buccal-distal, buccal-mesiodistal, palatal-mesial, palatal-distal, and palatal-mesiodistal. TPA wire dimensions were designed to be 0.7 mm, 0.9 mm, and 1.2 mm. The force and moment loads of the maxillary first molar were measured by the F/M sensor. RESULTS: Single buccal or palatal TSADs induced torquing movement, and single mesial or distal TSADs tended to promote tipping movement. Mesiodistal TSADs would have eliminated tipping, but accentuated torquing movement. The TPA significantly reduced the force and moment experienced by the maxillary first molar along three-dimensional axes. The thicker the TPA wire, the smaller the force and moment to which the maxillary first molar was subjected. CONCLUSIONS: Precise placement of TSADs might have a substantial influence on tooth movement and should be determined in accordance with specific clinical requirements. Increasing the TPA wire dimension could diminish the tipping, torquing, and rotation during TSAD-assisted maxillary molar intrusion, but these tendencies could not be completely eliminated.

Inhibition of 12/15-lipoxygenase reduces orthodontically induced root resorption in rats.

OBJECTIVES: To investigate whether the inhibition of 12/15-lipoxygenase (12/15-LOX), one of the core enzymes of the arachidonic acid cascade, suppresses orthodontically induced root resorption (OIRR), and examine the involvement of the hyaline degeneration of periodontal ligament cells and odontoclast differentiation. MATERIALS AND METHODS: The left maxillary first molars of 10-week-old male Wistar rats were moved mesially for 14 days using a closed-coil spring (25 cN) inserted between the first molar and incisor. The rats were intraperitoneally administered with a 12/15-LOX specific inhibitor (ML-351; 0.05 mmol/kg) daily in the experimental group or vehicle (dimethyl sulfoxide) in the control group. Tooth movement was measured using microcomputed tomography on day 14. The appearance of OIRR, hyaline degeneration, osteoclasts, and odontoclasts was evaluated via histological analysis. Immunohistochemical staining for receptor-activated NF-kB ligand (RANKL) and osteoprotegerin was performed. RESULTS: OIRR observed on day 14 in the control group was strongly suppressed by ML-351 treatment. Hyaline degeneration observed on the compression side on day 3 and the appearance of osteoclasts and odontoclasts on days 3 and 14 were significantly suppressed by ML-351. RANKL expression on day 3 was significantly suppressed by ML-351. These key processes in OIRR were substantially suppressed by ML-351 treatment. CONCLUSIONS: Inhibition of 12/15-LOX reduced OIRR by suppressing hyaline degeneration and subsequent odontoclast differentiation.

Skeletal effects of posterior crossbite treatment with either quad helix or rapid maxillary expansion: a randomized controlled trial with 1-year follow-up.

OBJECTIVES: To assess skeletal and dental effects and evaluate possible side effects of maxillary expansion with two different appliances, directly after expansion and 1 year postexpansion. MATERIALS AND METHODS: Forty-two patients with unilateral posterior crossbite (mean 9.5 ± 0.9 years) were randomized to either rapid maxillary expansion (RME) banded on the deciduous second molars and bonded to the primary canines or slow expansion with quad helix (QH) on the permanent first molars. Cone-beam computed tomography records were taken at baseline, directly after correction of the posterior crossbite and at follow-up 1 year after expansion. RESULTS: All patients were analyzed. RME opened the midpalatal suture more anteriorly and inferiorly (mean 4.1 mm) and less posteriorly and superiorly (mean 1.0 mm). No effect on midpalatal suture could be shown in the QH group after expansion, P < .001. Buccal bone width had significantly decreased (P < .001) in the QH group compared with the RME group. Buccal fenestrations and root resorption on the left first molar had a higher prevalence directly after expansion finished in the QH group (P = .0086, P = .013) but were not significant at 1-year follow-up (P = .11, P = .22). CONCLUSIONS: Opening of the suture with RME was more anterior and inferior, and the QH did not open the midpalatal suture at all. More buccal bone loss and fenestrations were seen on the permanent first molar in patients treated with conventional QH than RME anchored to deciduous teeth.

Evaluation of anchorage loss after en masse retraction in orthodontic patients with maxillary protrusion using friction vs frictionless mechanics: randomized clinical trial.

OBJECTIVES: To evaluate anchorage loss after en masse retraction in bimaxillary dentoalveolar protrusion patients using friction vs frictionless mechanics. MATERIALS AND METHODS: Thirty patients with bimaxillary dentoalveolar protrusion needing extraction of upper first premolars and en masse retraction with maximum anchorage were included in this two-arm, parallel, single-center, single-blinded randomized clinical trial with a 1:1 allocation ratio using fully sealed opaque envelopes. Friction group retraction utilized elastomeric power chain between miniscrews and hooks crimped mesial to upper canines on 17 × 25 stainless steel archwire. Frictionless group used customized T-loop springs loading upper first molars indirectly anchored to miniscrews. Activation was every 4 weeks until full retraction. The primary outcome assessed was anchorage loss evaluated at cusp tip and root apex of the first molar. First molar rotation, incisor tip and torque, and root resorption of anterior teeth were evaluated on digital models and cone beam computed tomography taken before and after space closure. RESULTS: Anchorage loss at crown of first molar was significantly more in frictionless group by 2.1 mm (95% CI = -0.4 to 3.5), (P = .014), while there was no significant difference in anchorage loss at root apex between groups. Significant mesial in molar rotation of 6.672° (95% CI = 12.2-21.2), (P = 0.02) was greater in the frictionless group. Both groups showed comparable tip, torque, and root resorption values. No severe harms were reported. There was mild gingival overgrowth and inflammation in the frictionless group due to T-loop irritation. CONCLUSIONS: Extra anchorage considerations are needed during en masse retraction when frictionless mechanics is implemented as higher anchorage loss and molar rotation were detected. No difference in tip, torque, and root resorption was observed.

Fluctuating arch symmetry: a comparison of two methods of assessment - applicability and efficiency.

INTRODUCTION: Symmetry is balance, some correspondence in the size, form, and arrangements of parts on opposite sides of a plane, line, or point. The opposite of this concept is asymmetry, or imbalance. OBJECTIVE: This retrospective study compared two methods for assessing arch symmetry with linear measurements based on triangles, to determine their applicability and efficiency. METHODS: Two groups were enrolled: children (n=20) and adults (n=20), and the arch symmetry was assessed from linear measurements. Method 1: the incisor-canine (INC), canine-molar (CM), and incisor-molar (INM) distances (paired t-test and Pearson correlation). Method 2: a mathematical equation between the cusps measurements of the canines and the distobuccal of the first molars leading to result 1 (t-test for one sample and bootstrapping analysis). Dental casts were digitized and analyzed using a software program. The Bland-Altman test compared the methods (α=0.05). RESULTS: The Bland-Altman test revealed concordance between the methods; however, separately the results were different: In method 1, the mandibular arch did not demonstrate correlation (children, INC r=0.33; CM r=0.45; INM r=0.51; adults, CM r=0.46; INM r=0.35), however, the maxilla revealed a strong correlation in children and a strong/moderate correlation in adults. In method 2, both arches were symmetrical (p>0.05). CONCLUSION: Method 1 may be appropriate during orthodontic treatment, and method 2 may be indicated for final treatment. These methods are useful; however, only method 1 identified the side of asymmetry. The methods can contribute to future studies in syndromic and non-syndromic patients, before and after orthognathic surgeries and orthodontic treatment, comparing results.

Spatial and angular alterations in the dental arch after premature loss of primary molars: Immediate and 9-month computed tomography evaluation.

BACKGROUND: Contemporary imaging methods and quickly advancing technologies have increased the number of diagnostic tools available in medicine and orthodontics. The current study aimed to determine three-dimensional (3D) space changes that occurred after the extraction of either the maxillary or mandibular primary molars during the mixed dentition period. MATERIALS AND METHODS: The present study was a longitudinal split-mouth study with a study group and a control group. The sample consisted of 20 children aged between 6 and 9 years. Clinical examination, radiological analysis, and 3D digital images of the plaster casts were used sequentially to gather all the data. The dental cast measurements recorded were arch width, arch length, hemi-perimeter, dental space at the extraction site, and angulation of the first permanent molar. The children were recalled for follow-up after 9 months, and all dental cast measurements were repeated using nondestructive 3D computed tomography software. For repeated measurements, the test applied was a paired t-test, and for independent samples, the test was a Student's t-test. RESULTS: A significant decrease in arch width (P = 0.001), arch length (P < 0.001), hemi-perimeter (P < 0.001), D-space (P < 0.001), and E-space (P = 0.001) was observed following extraction. A significant increase in angulation measurements was observed (P = 0.001). CONCLUSION: The study revealed a comparative reduction in mandibular arch width, a reduction in arch length in both the maxilla and the mandible, a reduced hemi-perimeter of dental arches, loss of dental extraction space, and a change in angulation of the erupted first permanent molars following premature loss of the primary molar.

Postoperative pain after total pulpotomy and root canal treatment in mature molars according to the new and traditional classifications of pulpitis: a prospective, randomized controlled trial.

BACKGROUND: The aim of this study was to compare postoperative pain following total pulpotomy (TP) and root canal treatment (RCT) in mature molar teeth with irreversible pulpitis. To compare the traditional pulpitis classification system with the Wolters system in evaluating postoperative pain. METHODS: Eighty mandibular molars with irreversible pulpitis were included and classified according to the Wolters (moderate/severe pulpitis). The teeth were randomly assigned to two groups (RCT or TP). RCT was performed following standardized protocols. TP was performed to the level of the canal orifices, and hemostasis was achieved with 2.5% sodium hypochlorite. A 3 mm layer of MTA was placed as the pulpotomy material. The teeth were restored with glass ionomer cement followed by composite. Pain scores were recorded preoperatively and, at 6, 12, 24, 48, and 72 h and 7 days after the interventions. The data were statistically analyzed using the Mann-Whitney U test, the Friedman test, the Wilcoxon signed-rank test, and the Spearman's correlation test. The significance level was set at 0.05. RESULTS: Sixty-four patients were analyzed at the one-week follow-up and all were diagnosed as irreversible pulpitis according to the AAE; 22 teeth were classified as moderate and 42 teeth were classified as severe pulpitis according to Wolters. There was no significant difference between TP and RCT in pain scores in moderate pulpitis patients (p > 0.05). There was a significant difference between TP and RCT at 24 and 72 h of severe pulpitis; higher pain scores were observed in the RCT (p < 0.05). CONCLUSIONS: In patients with moderate pulpitis, the TP procedure allowed symptom relief more quickly than RCT. In patients with severe pulpitis, TP provided for significantly lower pain scores compared to RCT at both 24 and 72 h. CLINICAL TRIAL REGISTRATION: The study was retrospectively registered with ClinicalTrials.gov (NCT05923619). Date of Registration: 06/16/23.

Single-cell RNA-seq analysis of rat molars reveals cell identity and driver genes associated with dental mesenchymal cell differentiation.

BACKGROUND: The molecular mechanisms and signaling pathways involved in tooth morphogenesis have been the research focus in the fields of tooth and bone development. However, the cell population in molars at the late bell stage and the mechanisms of hard tissue formation and mineralization remain limited knowledge. RESULTS: Here, we used the rat mandibular first and second molars as models to perform single-cell RNA sequencing (scRNA-seq) analysis to investigate cell identity and driver genes related to dental mesenchymal cell differentiation during the late bell hard tissue formation stage. We identified seven main cell types and investigated the heterogeneity of mesenchymal cells. Subsequently, we identified novel cell marker genes, including Pclo in dental follicle cells, Wnt10a in pre-odontoblasts, Fst and Igfbp2 in periodontal ligament cells, and validated the expression of Igfbp3 in the apical pulp. The dynamic model revealed three differentiation trajectories within mesenchymal cells, originating from two types of dental follicle cells and apical pulp cells. Apical pulp cell differentiation is associated with the genes Ptn and Satb2, while dental follicle cell differentiation is associated with the genes Tnc, Vim, Slc26a7, and Fgfr1. Cluster-specific regulons were analyzed by pySCENIC. In addition, the odontogenic function of driver gene TNC was verified in the odontoblastic differentiation of human dental pulp stem cells. The expression of osteoclast differentiation factors was found to be increased in macrophages of the mandibular first molar. CONCLUSIONS: Our results revealed the cell heterogeneity of molars in the late bell stage and identified driver genes associated with dental mesenchymal cell differentiation. These findings provide potential targets for diagnosing dental hard tissue diseases and tooth regeneration.

Associations between risk factors, including approximal contact types and dental caries in children from low-income families. Pilot study.

The present cross-sectional study was conducted to evaluate various caries risk factors in children from low socio-economic groups and to assess if children with broad contacts between one or more primary molars (type I and S) should be categorized as at high caries risk. Clinical examinations were performed on 107, 3- to 10-year-old children from low socio-economic settings. Contact types along with other caries risk factors (insurance, diet, plaque, and fluoride use, and diet habits) were analyzed for effect on presence of caries lesions (prevalence) and caries experience (decayed, missing, filled teeth). 78% of the study population had dental caries lesions, with an average dmft of 5.6. Of the 277 evaluated contacts, 88% were categorized as broad contacts. Multivariate analyses failed to validate that broad contacts were a predictor of dental caries lesions. However, the analysis showed an association of insurance status, plaque index with dmft. In conclusion, the present study could not implicate broad contacts as a factor that increased caries risk in the studied population; however, it validates the importance of insurance status, plaque index, as well as diet frequency as predictors of dental caries lesions.

Effect of adding sodium fluoride and nano-hydroxyapatite nanoparticles to the universal adhesive on bond strength and microleakage on caries-affected primary molars.

Evaluation of micro tensile bond strength (µTBS) and marginal leakage of sodium fluoride (NaF) and nano-hydroxyapatite (n-HA) modified universal adhesives (UAs) bonded using etch-and-rinse (ER) and self-etch (SE) bonding technique to the carious affected dentin (CAD). One hundred and twenty primary molars were prepared for CAD on the occlusal surface. The occlusal CAD surface was flattened and underwent a polishing procedure. The specimens were divided into six groups using a random allocation method based on the UAs applied and the mode of etching used (n = 20) Group A1: UAs (ER), Group B1: UAs (SE), Group A2: UAs (NaF) + ER, Group B2: UAs (NaF) + SE, Group A3: UA (n-HA) + ER and Group B3: UAs (n-HA) + SE. Composite restoration was placed and samples were thermocycled. Microleakage, µTBS, and failure mode assessment were performed using a dye penetration test, universal testing equipment, and stereomicroscope respectively. The µTBS and microleakage results (mean ± SD) were examined using analysis of the variance (ANOVA) and Tukey post hoc tests. Group B1 (UAs + SE) demonstrated the maximum scores of microleakage (25.14 ± 9.12 nm) and minimum recorded value of µTBS (14.16 ± 0.55 MPa). In contrast, Group A3 (UAs (n-HA) + ER) displayed a minimum value of marginal leakage (12.32 ± 6.33 nm) and maximum µTBS scores (19.22 ± 0.92 MPa). The outcomes of the intergroup comparison analysis showed that Group A2 (UAs (NaF) + ER), Group B2 (UAs (NaF) + SE), Group A3 (UA (n-HA) + ER) and Group B3 (UAs (n-HA) + SE) presented comparable outcomes of marginal seal outcomes and µTBS scores (p > 0.05). NaF and n-HA-modified UAs displayed favorable bond strength and minimum marginal leakage to the deciduous affected dentin surface.

Apically extruded debris evaluation with the use of ProTaper Ultimate and TruNatomy files systems with and without glider preparation in primary tooth.

Information regarding the influence of resorption and glide paths on debris extrusion in primary teeth is lacking. Therefore, we evaluated debris extrusion with and without resorption and with and without the use of a path file in primary molar teeth prepared with ProTaper Ultimate (PTU) Prime and TruNatomy (TRN) Prime rotary file systems. Forty resorbed and forty non-resorbed primary molar teeth were collected. Both groups were divided into four subgroups (n = 10). The Eppendorf tubes were weighed pre-debris. The distal canals of the teeth were prepared with PTU Prime and TRN Prime file systems, with and without the use of path files. The debris-filled tubes were weighed, and the weight of only the extruded debris was calculated by subtraction. The data were analyzed using a three-way analysis of variance (ANOVA) test. The presence of tooth resorption significantly increased debris extrusion, and the use of a path file significantly decreased debris extrusion (p < 0.001). The binary and ternary interactions of the three evaluated parameters among the groups showed no significant differences in terms of the amount of debris extruded (p > 0.05). While debris extrusion was observed in all groups, the use of a glide path file in primary teeth before the preparation process resulted in less debris extrusion.

Comparative evaluation of clinical efficacy and volumetric changes in pulpectomized primary molars using hand K-file, ProTaper rotary file, and Kedo-SG blue file: an in-vitro cone beam computed tomography analysis.

The accomplishment of a successful pulpectomy depends on multiple factors that involve targeted removal of the causative irritants and soft and hard tissue debris by mechanical and chemical means. Compare and evaluate the efficacy of canal preparation and volumetric filling using conventional files and two rotary file systems using cone beam computed tomography (CBCT). Thirty freshly extracted human primary second molars were randomly divided into three groups of 10 teeth each. After access opening and working length determination, pre-operative volume analysis was done using CBCT. The canals were then instrumented by either hand K-files, ProTaper rotary files or Kedo-SG Blue rotary files. Post-operative volume analysis was performed using CBCT. All the canals were obturated using Metapex and scanned again using CBCT. Mean values of the pre- and post-operative canal volumes were analyzed using one-way Analysis of Variance (ANOVA). Inter- and intra-group volumetric changes were analyzed statistically using a post hoc test. The mean difference in volume after canal preparation and obturation was the highest in the Kedo-SG Blue group, followed by the ProTaper group and the least in the hand K group (p = 0.001). Inter-group comparison showed statistically significant differences between the hand K group and ProTaper group (p = 0.001), the ProTaper group and Kedo-SG Blue group (p = 0.001), and the hand-K group and Kedo-SG Blue group (p = 0.02). The volume of preparation and obturation was the highest using Kedo-SG Blue, followed by the ProTaper file systems.

Clinical application of Er:YAG laser and traditional dental turbine in caries removal in children.

This study compares the clinical efficacy of erbium-doped:yttrium-aluminium-garnet (Er:YAG) laser and traditional dental turbine in caries removal in children. The study cohort comprised 78 children aged 5 to 10 years with caries in two symmetrical maxillary molars. Different carious sides of the same child were randomly divided into control and observed sides. For each child, the caries on the control side were treated with a traditional dental turbine, while the observed side was treated with an Er:YAG laser. The study evaluated the use of anesthetics, pain levels, tooth hypersensitivity and the occurrence and severity of tooth fractures during caries removal with different methods. Additionally, the clinical anxiety and cooperative behavior of the children were observed. The time required for caries removal and cavity preparation by both methods was recorded, and the success rate of treatment was assessed after one year of follow-up. The results indicated a significant reduction in the use of anesthetics, pain and the incidence and severity of tooth hypersensitivity with the use of Er:YAG laser (p < 0.05). No significant difference was found in the occurrence of tooth fractures between the two groups (p > 0.05). The children treated with Er:YAG laser demonstrated better clinical anxiety levels and cooperative behavior. However, the time required for cavity preparation was longer with the use of Er:YAG laser (p < 0.05). After a 12-month follow-up, there was no significant difference in the success rate of treatment between the two groups (p > 0.05). In conclusion, compared to the traditional dental turbine, the use of Er:YAG laser improves treatment comfort and cooperation in children with caries and reduces the need for intraoperative anesthetics.

Onset and progression of dental erosion in a mouse model.

OBJECTIVE: Purpose of this research was to examine the onset, progression and wear rates of dental erosion in an established mouse model. MATERIAL AND METHODS: Dental erosion in mice was experimentally induced, and the acidic effects of cola drink on their teeth after 2, 4 and 6-weeks were closely analysed by scanning electron microscopy. The tooth height and enamel or dentin loss were established.  Results: The dental erosion on the molars showed clear progression from 2 to 6 weeks. By the 2-week mark, a significant portion of enamel was already eroded, revealing the dentin on the lingual cusps. When adjusted for attritional wear, molars exposed to cola for 2 weeks showed a 35% drop in lingual tooth height compared to controls (533 µm vs. 818 µm). At 4 and 6 weeks, the cola-exposed group continued to display decreased lingual tooth heights by 40% (476 µm vs. 799 µm) and 43% (440 µm vs. 767 µm), respectively. CONCLUSION: This study revealed significant acidic effects of cola drink on mouse molars as early as 2 weeks. These findings highlight the challenge of monitoring dental erosion clinically and underscore the importance of early preventive and intervention measures.

Comprehensive Analysis of Mandibular First Molar Root and Canal Morphology in Saudi Patients Using Cone Beam Computed Tomography (CBCT).

BACKGROUND The goal of conventional endodontic therapy is to clean the root canal system thoroughly, restore tooth function, and prevent re-infection. Success depends on understanding root canal morphology, resolving apical periodontitis, and using proper techniques. Studies highlight variations in root canal anatomy, with cone-beam computed tomography (CBCT) being crucial for accurate diagnosis despite its high cost and limited availability. MATERIAL AND METHODS This retrospective study reviewed CBCT images of 1820 (907 male, 913 female) patients aged 18 to 78 years. Analysis included 2081 mandibular first molars for variations in root and canal morphology and right- and left-side symmetry. Inter-orifice distance was measured, along with distance from the cementoenamel junction (CEJ) to the level of canal bifurcation. RESULTS In this study, 96.01% of teeth had 2 roots and 3.89% had 3 roots. The percentages of canal configuration were 77.70% for 3 canals, 21.58% for 4 canals, 0.67% for 2 canals, and 0.05% for 1 canal. The inter-orifice distance was 2.07 mm for 2 canals in 1 root and 2.86 mm for 2 canals in separate distal roots. Distance from the CEJ to canal bifurcation varied significantly between 2 canals within 1 distal root (3.35 mm), 2 canals in separate distal roots (1.60 mm), as well as between distal (3.35 mm) and mesial roots (1.10 mm). CONCLUSIONS In mandibular first molars, only 3.89% have additional distolingual roots. Sex and ethnicity showed no influence on number of roots and canals. Distal canals showed a deeper bifurcation and greater inter-orifice distance than did mesial canals.