ABSTRACT
Background/aim: Isokinetic strength assessment of the rotator cuff muscle is frequently applied in a variety of shoulder postures, but none of these consider muscular architecture, which is one of the most important aspects of improving strength development. This study aimed to examine the test and retest reliability and validity of the muscle architecture-based position (MABP), which is 25° abduction and 20° external rotation, in healthy subjects to be able to select a better isokinetic assessment position for shoulder rotator cuff muscles. Materials and methods: A total of 54 healthy males with a mean age of 21.0 ± 1.2 years and mean body mass index of 22.8 ± 1.7 kg/m2 completed an isokinetic measurement session. All of the tests were performed on an IsoMed 2000 isokinetic dynamometer concentrically and eccentrically for both upper limbs at 60°/s angular velocity. All of the participants completed 3 measurement sessions: the first represented the isokinetic testing and was performed in the scapular neutral position (SNP) (45° shoulder flexion and abduction), the second represented the MABP (25° abduction and 20° ER) for shoulder rotator cuff muscles, and the third represented the test and retest of the MABP. Results: The correlations between the 2 techniques for assessing concurrent validity ranged from 0.908 to 0.994. The values obtained from the MABP were higher than those obtained in the SNP. There was no systematic bias for any measurements between the MABP and the retest of the MABP (p > 0.05). The intraclass correlation coefficients representing the test and retest reliability results for each variable measured with the MABP was higher than 0.98 and this value was considered as excellent reliability. Conclusion: In conclusion, the MABP can be used to assess the isokinetic strength of the rotator cuff muscles safely and confidently, with increased quantities of force being released and measurement at optimal muscle tension.
Subject(s)
Muscle Strength , Rotator Cuff , Humans , Male , Rotator Cuff/physiology , Reproducibility of Results , Muscle Strength/physiology , Young Adult , Muscle Strength Dynamometer , Range of Motion, Articular/physiology , Adult , Healthy Volunteers , Posture/physiologyABSTRACT
The human rotator cuff consists of four muscles, each with a complex, multipennate architecture. Despite the functional and clinical importance, the architecture of the human rotator cuff has yet to be clearly described in humans in vivo. The purpose of this study was to investigate the intramuscular, intermuscular, and interindividual variations in architecture and moment arms of the human rotator cuff. Muscle volumes, fascicle lengths, physiological cross-sectional areas (PCSAs), pennation angles, and moment arms of all four rotator cuff muscles were measured from mDixon and diffusion tensor imaging (DTI) scans of the right shoulders of 20 young adults. In accordance with the most detailed dissections available to date, we found substantial intramuscular variation in fascicle length (coefficients of variation (CVs) ranged from 26% to 40%) and pennation angles (CVs ranged from 56% to 62%) in all rotator cuff muscles. We also found substantial intermuscular and interindividual variations in muscle volumes, but relatively consistent mean fascicle lengths, pennation angles, and moment arms (CVs for all ≤17%). Moreover, when expressed as a proportion of total rotator cuff muscle volume, the volumes of individual rotator cuff muscles were highly consistent between individuals and sexes (CVs ≤16%), suggesting that rotator cuff muscle volumes scale uniformly, at least in a younger population without musculoskeletal problems. Together, these data indicate limited interindividual and intermuscular variability in architecture, which may simplify scaling routines for musculoskeletal models. However, the substantial intramuscular variation in architecture questions the validity of previously reported mean architectural parameters to adequately describe rotator cuff function.
Subject(s)
Rotator Cuff , Humans , Male , Rotator Cuff/anatomy & histology , Rotator Cuff/diagnostic imaging , Rotator Cuff/physiology , Female , Adult , Young Adult , Muscle, Skeletal/anatomy & histology , Muscle, Skeletal/physiology , Muscle, Skeletal/diagnostic imaging , Imaging, Three-DimensionalABSTRACT
The shoulder joint has a high degree of freedom and an extremely complex and unstable kinematic mechanism. Coordinated contraction of the rotator cuff muscles that stop around the humeral head and the deltoid muscles and the extensibility of soft tissues, such as the joint capsule, labrum, and ligaments, contribute to shoulder-joint stability. Understanding the mechanics of shoulder-joint movement, including soft-tissue characteristics, is important for disease prevention and the development of a device for disease treatment. This study aimed to create a musculoskeletal shoulder model to represent the realistic behavior of joint movement and soft-tissue deformation as a dynamic simulation using a rigid-body model for bones and a soft-body model for soft tissues via a spring-damper-mass system. To reproduce the muscle-contraction properties of organisms, we used a muscle-expansion representation and Hill's mechanical muscle model. Shoulder motion, including the movement of the center of rotation in joints, was reproduced, and the strain in the joint capsule during dynamic shoulder movement was quantified. Furthermore, we investigated narrowing of the acromiohumeral distance in several situations to induce tissue damage due to rotator cuff impingement at the anterior-subacromial border during shoulder abduction. Given that the model can analyze exercises under disease conditions, such as muscle and tendon injuries and impingement syndrome, the proposed model is expected to help elucidate disease mechanisms and develop treatment guidelines.
Subject(s)
Models, Anatomic , Shoulder Joint , Shoulder Joint/anatomy & histology , Shoulder Joint/physiology , Humans , Biomechanical Phenomena , Range of Motion, Articular , Rotator Cuff/physiology , Rotator Cuff/anatomy & histology , Muscle, Skeletal/anatomy & histology , Muscle, Skeletal/physiology , Computer SimulationABSTRACT
Incorporating detailed muscle architecture aspects into computational models can enable researchers to gain deeper insights into the complexity of muscle function, movement, and performance. In this study, we employed histological, multiphoton image processing, and finite element method techniques to characterise the mechanical dependency on the architectural behaviour of supraspinatus and infraspinatus mouse muscles. While mechanical tests revealed a stiffer passive behaviour in the supraspinatus muscle, the collagen content was found to be two times higher in the infraspinatus. This effect was unveiled by analysing the alignment of fibres during muscle stretch with the 3D models and the parameters obtained in the fitting. Therefore, a strong dependence of muscle behaviour, both active and passive, was found on fibre orientation rather than collagen content.
Subject(s)
Rotator Cuff , Animals , Mice , Rotator Cuff/physiology , Rotator Cuff/anatomy & histology , Finite Element Analysis , Biomechanical Phenomena/physiology , Models, Biological , Collagen/chemistry , Collagen/metabolism , Male , Mice, Inbred C57BLABSTRACT
Rotator cuff (RC) tears are a common source of pain and decreased shoulder strength. Muscle length is known to affect muscle strength, and therefore evaluating changes in supraspinatus muscle length associated with RC pathology, surgical repair, and post-operative recovery may provide insights into functional deficits. Our objective was to develop a reliable MRI-based approach for assessing supraspinatus muscle length. Using a new semi-automated approach for identifying 3D location of the muscle-tendon junction (MTJ), supraspinatus muscle length was calculated as the sum of MTJ distance (distance between 3D MTJ position and glenoid plane) and supraspinatus fossa length (distance between root of the scapular spine and glenoid plane). Inter- and intra-operator reliability of this technique were assessed with intraclass correlation coefficient (ICC) and found to be excellent (ICCs > 0.96). Muscle lengths of 6 patients were determined before RC repair surgery and at 3- and 12-months post-surgery. Changes in normalized muscle length (muscle length as a percentage of pre-surgical muscle length) at 3 months post-surgery varied considerably across patients (16.1 % increase to 7.0 % decrease) but decreased in all patients from 3- to 12-months post-surgery (0.3 % to 17.2 %). This study developed a novel and reliable approach for quantifying supraspinatus muscle length and provided preliminary demonstration of its utility by assessing muscle length changes associated with RC pathology and surgical repair. Future studies can use this technique to evaluate changes over time in supraspinatus muscle length in response to clinical intervention, and associations between muscle length and shoulder function.
Subject(s)
Imaging, Three-Dimensional , Magnetic Resonance Imaging , Rotator Cuff Injuries , Rotator Cuff , Humans , Magnetic Resonance Imaging/methods , Rotator Cuff/diagnostic imaging , Rotator Cuff/surgery , Rotator Cuff/physiology , Male , Rotator Cuff Injuries/surgery , Rotator Cuff Injuries/diagnostic imaging , Rotator Cuff Injuries/physiopathology , Middle Aged , Female , Imaging, Three-Dimensional/methods , Aged , Adult , Muscle, Skeletal/diagnostic imaging , Muscle, Skeletal/physiology , Reproducibility of ResultsABSTRACT
Glenohumeral biomechanics after rotator cuff (RC) tears have not been fully elucidated. This study aimed to investigate the muscle compensatory mechanism in weight-bearing shoulders with RC tears and asses the induced pathomechanics (i.e., glenohumeral translation, joint instability, center of force (CoF), joint reaction force). An experimental, glenohumeral simulator with muscle-mimicking cable system was used to simulate 30° scaption motion. Eight fresh-frozen shoulders were prepared and mounted in the simulator. Specimen-specific scapular anthropometry was used to test six RC tear types, with intact RC serving as the control, and three weight-bearing loads, with the non-weight-bearing condition serving as the control. Glenohumeral translation was calculated using instantaneous helical axis. CoF, muscle forces, and joint reaction forces were measured using force sensors integrated into the simulator. Linear mixed effects models (RC tear type and weight-bearing) with random effects (specimen and sex) were used to assess differences in glenohumeral biomechanics. RC tears did not change the glenohumeral translation (p > 0.05) but shifted the CoF superiorly (p ≤ 0.005). Glenohumeral translation and joint reaction forces increased with increasing weight bearing (p < 0.001). RC and deltoid muscle forces increased with the presence of RC tears (p ≤ 0.046) and increased weight bearing (p ≤ 0.042). The synergistic muscles compensated for the torn RC tendons, and the glenohumeral translation remained comparable to that for the intact RC tendons. However, in RC tears, the more superior CoF was close to where glenoid erosion occurs in RC tear patients with secondary osteoarthritis. These findings underscore the importance of early detection and precise management of RC tears.
Subject(s)
Rotator Cuff Injuries , Shoulder Joint , Humans , Shoulder/physiology , Rotator Cuff/physiology , Shoulder Joint/physiology , Biomechanical Phenomena , Weight-Bearing , Cadaver , Range of Motion, Articular/physiologyABSTRACT
Ultrasound elastography is a valuable method employed to evaluate tissue stiffness, with shear-wave elastography (SWE) recently gaining significance in various settings. This literature review aims to explore the potential of SWE as a diagnostic and monitoring tool for musculoskeletal injuries. In total, 15 studies were found and included in the review. The outcomes of these studies demonstrate the effectiveness of SWE in detecting stiffness changes in individuals diagnosed with Achilles tendinopathy, Achilles tendon rupture, rotator cuff rupture, tendinosis of the long head of the biceps tendon, injury of the supraspinatus muscle, medial tibial stress syndrome, and patellar tendinopathy. Moreover, SWE proves its efficacy in distinguishing variations in tissue stiffness before the commencement and after the completion of rehabilitation in cases of Achilles tendon rupture and patellar tendinopathy. In summary, the findings from this review suggest that SWE holds promise as a viable tool for diagnosing and monitoring specific musculoskeletal injuries. However, while the field of ultrasound elastography for assessing musculoskeletal injuries has made considerable progress, further research is imperative to corroborate these findings in the future.
Subject(s)
Achilles Tendon , Elasticity Imaging Techniques , Tendinopathy , Humans , Elasticity Imaging Techniques/methods , Rotator Cuff/diagnostic imaging , Rotator Cuff/physiology , UltrasonographyABSTRACT
Deep learning models (DLM) are efficient replacements for computationally intensive optimization techniques. Musculoskeletal models (MSM) typically involve resource-intensive optimization processes for determining joint and muscle forces. Consequently, DLM could predict MSM results and reduce computational costs. Within the total shoulder arthroplasty (TSA) domain, the glenohumeral joint force represents a critical MSM outcome as it can influence joint function, joint stability, and implant durability. Here, we aimed to employ deep learning techniques to predict both the magnitude and direction of the glenohumeral joint force. To achieve this, 959 virtual subjects were generated using the Markov-Chain Monte-Carlo method, providing patient-specific parameters from an existing clinical registry. A DLM was constructed to predict the glenohumeral joint force components within the scapula coordinate system for the generated subjects with a coefficient of determination of 0.97, 0.98, and 0.98 for the three components of the glenohumeral joint force. The corresponding mean absolute errors were 11.1, 12.2, and 15.0 N, which were about 2% of the maximum glenohumeral joint force. In conclusion, DLM maintains a comparable level of reliability in glenohumeral joint force estimation with MSM, while drastically reducing the computational costs.
Subject(s)
Deep Learning , Shoulder Joint , Humans , Shoulder Joint/physiology , Reproducibility of Results , Biomechanical Phenomena , Rotator Cuff/physiologyABSTRACT
The shoulder is the most mobile joint in the human body, thus requiring intricate coordination of adjacent muscles. Patients suffered from rotator cuff muscle injuries have several typical symptoms including shoulder pain and difficulty raising the arm, thus reducing work efficiency and compromising the quality of life. Ultrasound has been used widely for shoulder soft tissue imaging as well as ultrasound elastography was introduced in shoulder examination for the dilemma of treating degenerative rotator cuff tears. However, most of the ultrasound examination was performed under a static condition. Providing dynamic information from shoulder muscle is important in clinical applications because the pains sometimes come from various positions of the shoulder during moving. In this study, a customized wearable T-shaped ultrasound transducer (128 + 128 elements) was proposed for shoulder dual-direction shear wave elastography (DDSWE), which provides the SWE for both longitudinal (SW along the muscle fiber) and transverse (SW cross the muscle fiber) directions dynamically. An optical tracking system was synchronized with an ultrasound imaging system to capture shoulder movements in 3-D space with their corresponding ultrasound images. The performance of DDSWE and the accuracy of optical tracking were verified by phantom experiments. Human studies were carried out by volunteers as they are moving their arms. The experimental results show that the bias and precision for the proposed DDSWE in elastic phantom were about 6% and 1.2% for both directions, respectively. A high accuracy of optical tracking was observed using a 3-D motor stage experimental setup. Human experiments show that the shear wave velocities (SWVs) were increased with the angles of shoulder abduction, and the average transverse and longitudinal SWVs were increased from 2.24 to 3.35 m/s and 2.95 to 5.95 m/s with abduction angle from 0° to 60°, respectively, which they are anisotropic-dependent. All the experimental results indicate that the proposed wearable ultrasound DDSWE can quantify the mechanical properties of shoulder muscles dynamically, thereby helping surgeons and physical therapists determine whether the intensity of rehabilitation shoulder be tuned down or escalated in the future.
Subject(s)
Elasticity Imaging Techniques , Equipment Design , Phantoms, Imaging , Shoulder , Wearable Electronic Devices , Elasticity Imaging Techniques/methods , Elasticity Imaging Techniques/instrumentation , Humans , Shoulder/diagnostic imaging , Shoulder/physiology , Adult , Male , Muscle, Skeletal/diagnostic imaging , Muscle, Skeletal/physiology , Rotator Cuff/diagnostic imaging , Rotator Cuff/physiology , TransducersABSTRACT
The majority of manual wheelchair users (MWCU) develop shoulder pain or injuries, which is often caused by impingement. Because propulsion mechanics are influenced by the recovery hand pattern used, the pattern may affect shoulder loading and susceptibility to injury. Shoulder muscle weakness is also correlated with shoulder pain, but how shoulder loading changes with specific muscle group weakness is unknown. Musculoskeletal modeling and simulation were used to compare glenohumeral joint contact forces (GJCFs) across hand patterns and determine how GJCFs vary when primary shoulder muscle groups are weakened. Experimental data were analyzed to classify individuals into four hand pattern groups. A representative musculoskeletal model was then developed for each group and simulations generated to portray baseline strength and six muscle weakness conditions. Three-dimensional GJCF peaks and impulses were compared across hand patterns and muscle weakness conditions. The semicircular pattern consistently had lower shear (anterior-posterior and superior-inferior) GJCFs compared to other patterns. The double-loop pattern had the highest superior GJCFs, while the single-loop pattern had the highest anterior and posterior GJCFs. These results suggest that using the semicircular pattern may be less susceptible to shoulder injuries such as subacromial impingement. Weakening the internal rotators and external rotators resulted in the greatest increases in shear GJCFs and decreases in compressive GJCF, likely due to decreased force from rotator cuff muscles. These findings suggest that strengthening specific muscle groups, especially the rotator cuff, is critical for decreasing the risk of shoulder overuse injuries.
Subject(s)
Shoulder Joint , Wheelchairs , Humans , Shoulder Joint/physiology , Shoulder , Shoulder Pain/etiology , Rotator Cuff/physiology , Muscle Weakness/complications , Biomechanical PhenomenaABSTRACT
Rotator cuff tear is a common shoulder injury that causes shoulder dysfunction and pain. Although surgical repair is the primary treatment for rotator cuff tear, it is well recognized that impaired force exertion of muscles connecting to the involved tendon and subsequent complemental change in the force exertion of synergist muscles persist even after repair. This study aimed to identify the compensation strategy of shoulder abductors by examining how synergist muscles respond to supraspinatus (SSP) muscle force deficit in patients with rotator cuff repair. Muscle shear modulus, an index of muscle force, was assessed for SSP, infraspinatus, upper trapezius, and middle deltoid muscles in repaired and contralateral control shoulders of 15 patients with unilateral tendon repair of the SSP muscle using ultrasound shear wave elastography while the patients passively or actively held their arm in shoulder abduction. In the repaired shoulder, the shear modulus of the SSP muscle declined, whereas that of other synergist muscles did not differ relative to that of the control. To find the association between the affected SSP and each of the synergist muscles, a regression analysis was used to assess the shear moduli at the population level. However, no association was observed between them. At the individual level, there was a tendency of variation among patients with regard to a specific muscle whose shear modulus complementarily increased. These results suggest that the compensation strategy for SSP muscle force deficit varies among individuals, being nonstereotypical in patients with rotator cuff injury.
Subject(s)
Rotator Cuff Injuries , Shoulder Joint , Humans , Rotator Cuff/diagnostic imaging , Rotator Cuff/surgery , Rotator Cuff/physiology , Rotator Cuff Injuries/surgery , Shoulder Joint/surgery , Muscle, Skeletal , TendonsABSTRACT
OBJECTIVES: To investigate the effects of low-load blood flow restriction (BFR) training on shoulder muscle thickness, rotator cuff (RC) strength, and shoulder symptoms in patients with RC tendinopathy. DESIGN: A randomized, assessor-blinded, controlled trial. SETTINGS: Physiotherapy clinic at a university. PARTICIPANTS: Twenty-eight patients were randomized into an 8-week (2 times/week) shoulder rehabilitation, that is, BFR or non-BFR group. INTERVENTIONS: BFR training. MAIN OUTCOME MEASURES: (1) RC, deltoid, scapula retractor, and biceps muscle thicknesses and shoulder internal rotation (IR) and external rotation (ER) strengths. (2) Shoulder pain/function. RESULTS: The BFR group had a greater increase in biceps muscle thickness ( P = 0.002) and shoulder IR strength at 60 degrees/s ( P = 0.040) than the non-BFR group. No differences between the 2 groups were observed in other measurements. Significant improvements in supraspinatus, infraspinatus, and scapula retractor muscle thicknesses and in shoulder ER and IR strengths were observed over time in both the groups (all P < 0 .05). Also, shoulder pain decreased and shoulder function increased over time in both the groups (all P < 0 .05). CONCLUSIONS: Low-load BFR training resulted in a greater increase in biceps thickness and shoulder IR strength compared with the non-BFR group in patients with RC tendinopathy. However, there was no superiority of either exercise training regarding the RC, scapula retractor, deltoid muscle thicknesses, or improvements in shoulder ER strength and shoulder pain/function. CLINICAL TRIAL REGISTRY NAME AND REGISTRATION NUMBER: The study was registered in ClinicalTrials.gov named Blood Flow Restriction Training in Patients with Shoulder Pain and the registration number is NCT04333784.
Subject(s)
Rotator Cuff , Tendinopathy , Humans , Rotator Cuff/physiology , Shoulder Pain/therapy , Blood Flow Restriction Therapy , Shoulder , Tendinopathy/therapyABSTRACT
Shoulder pain is a complex, prevalent problem that is multifactorial in nature. While there are many potential causes, one common suspect is the rotator cuff musculature. The purpose of the present study was to induce pain in the supraspinatus muscle of healthy subjects and observe the resulting changes in muscle activity. Eight muscles on 23 subjects were assessed using electromyography: anterior, middle, and posterior deltoid; pectoralis major; upper trapezius; latissimus dorsi; serratus anterior; supraspinatus; and infraspinatus. It was hypothesized that the rotator cuff muscles would display reduced activity during pain, and that reductions in activity would remain after the pain had dissipated. Both of the rotator cuff muscles measured did indeed display reduced activity in a majority of the dynamic, isometric, and maximal contractions. Many of those reductions remained after the pain had subsided.
Subject(s)
Rotator Cuff , Shoulder Joint , Humans , Rotator Cuff/physiology , Healthy Volunteers , Shoulder/physiology , Muscle, Skeletal/physiology , Electromyography , Shoulder Joint/physiology , Shoulder PainABSTRACT
Exercise therapy for individuals with rotator cuff tears fails in approximately 25.0 % of cases. One reason for failure of exercise therapy may be the inability to strengthen and balance the muscle forces crossing the glenohumeral joint that act to center the humeral head on the glenoid. The objective of the current study was to compare the magnitude and orientation of the net muscle force pre- and post-exercise therapy between subjects successfully and unsuccessfully (e.g. eventually underwent surgery) treated with a 12-week individualized exercise therapy program. Twelve computational musculoskeletal models (n = 6 successful, n = 6 unsuccessful) were developed in OpenSim (v4.0) that incorporated subject specific tear characteristics, muscle peak isometric force, in-vivo kinematics and bony morphology. The models were driven with experimental kinematics and the magnitude and orientation of the net muscle force was determined during scapular plane abduction at pre- and post-exercise therapy timepoints. Subjects unsuccessfully treated had less inferiorly oriented net muscle forces pre- and post-exercise therapy compared to subjects successfully treated (p = 0.039 & 0.045, respectively). No differences were observed in the magnitude of the net muscle force (p > 0.05). The current study developed novel computational musculoskeletal models with subject specific inputs capable of distinguishing between subjects successfully and unsuccessfully treated with exercise therapy. A less inferiorly oriented net muscle force in subjects unsuccessfully treated may increase the risk of superior migration leading to impingement. Adjustments to exercise therapy programs may be warranted to avoid surgery in subjects at risk of unsuccessful treatment.
Subject(s)
Rotator Cuff Injuries , Shoulder Joint , Humans , Rotator Cuff Injuries/therapy , Rotator Cuff/physiology , Scapula , Shoulder Joint/physiology , Biomechanical Phenomena , Exercise Therapy , Range of Motion, Articular/physiologySubject(s)
Shoulder Injuries , Shoulder , Humans , Shoulder/physiology , Rotator Cuff/physiology , Risk FactorsABSTRACT
PURPOSE: To investigate the stabilizing role of the long head of the biceps (LHB) for different simulated rotator cuff (RC) tears. METHODS: Human cadaveric specimens (n = 8) were fixed in a robotic-based experimental setup with a static loading of the RC, deltoid, and the LHB. RC tears were simulated by unloading of the corresponding muscles. A throwing motion and an anterior load-and-shift test were simulated under different RC conditions by unloading the supraspinatus (SS), subscapularis (SSc), infraspinatus (IS), and combinations (SS + SSc, SS + IS, SS + SSc + IS). The LHB was tested in 3 conditions: unloaded, loaded, and tenotomy. Translation of the humeral head and anterior forces depending on loading of the RC and the LHB was captured. RESULTS: Loading of LHB produced no significant changes in anterior force or glenohumeral translation for the intact RC or a simulated SS tear. However, if SSc or IS were unloaded, LHB loading resulted in a significant increase of anterior force ranging from 3.9 N (P = .013, SSc unloaded) to 5.2 N (P = .001, simulated massive tear) and glenohumeral translation ranging from 2.4 mm (P = .0078, SSc unloaded) to 7.4 mm (P = .0078, simulated massive tear) compared to the unloaded LHB. Tenotomy of the LHB led to a significant increase in glenohumeral translation compared to the unloaded LHB in case of combined SS + SSc (2.6 mm, P = .0391) and simulated massive tears of all SS + SSc + IS (4.6 mm, P = .0078). Highest translation was observed in simulated massive tears between loaded LHB and tenotomy (8.1 mm, P = .0078). CONCLUSIONS: Once SSc or IS is simulated to be torn, the LHB has a stabilizing effect for the glenohumeral joint and counteracts humeral translation. With a fully loaded RC, LHB loading has no influence. CLINICAL RELEVANCE: With an intact RC, the condition of the LHB showed no biomechanical effect on the joint stability. Therefore, from a biomechanical point of view, the LHB could be removed from the joint when the RC is intact or reconstructable. However, since there was a positive effect even of the unloaded LHB in this study when SSc or IS is deficient, techniques with preservation of the supraglenoid LHB origin may be of benefit in such cases.
Subject(s)
Lacerations , Rotator Cuff Injuries , Shoulder Joint , Humans , Rotator Cuff/surgery , Rotator Cuff/physiology , Shoulder Joint/surgery , Shoulder Joint/physiology , Rotator Cuff Injuries/surgery , Muscle, Skeletal , Humeral Head/surgeryABSTRACT
OBJECTIVES: The primary purpose of this study is to investigate the feasibility of using ultrasound to verify the placement of narrow-gauge dry needles within the supraspinatus and infraspinatus muscles utilizing palpation-based dry needle techniques. METHODS: This is a prospective observational study with 10 participants recruited. Each participant had a dry needle placed within the infraspinatus and supraspinatus muscles by a trained physical therapist utilizing palpation-based methods. Following needle placement, ultrasound examination was then performed to determine the feasibility of needle tip visualization within the targeted tissues. RESULTS: The needle tip was successfully visualized on ultrasound in 19/20 cases. The needle tip accurately resided in the targeted muscle tissue in each of the 19 cases it was successfully visualized. CONCLUSIONS: Narrow-gauge dry needles used in physical therapy practice can be consistently visualized in the supraspinatus and infraspinatus muscles using ultrasound imaging. Also, the palpation method utilized is an accurate means of guiding dry needles into the targeted rotator cuff muscles. These are significant findings because most physical therapy clinics do not have the benefit of real-time imaging guidance and must rely solely on palpation-based needling methods.
Subject(s)
Percutaneous Collagen Induction , Rotator Cuff , Humans , Rotator Cuff/diagnostic imaging , Rotator Cuff/physiology , Prospective Studies , Feasibility Studies , UltrasonographyABSTRACT
Shoulder impingement syndrome can be caused by a muscle imbalance around the shoulder joint. It would be beneficial for therapy to implement rehabilitation exercises based on intermuscular coordination in order to achieve muscle balance. This study presents the muscle synergy characteristics of patients with shoulder impingement syndrome, which can be used to develop rehabilitation exercises. During pick and place task, the muscle synergy obtained from eight shoulder muscles in patients and healthy subjects was compared. The experimental results revealed that patients have low contributed muscle synergy structures for the serratus anterior and infraspinatus.Clinical relevance- This proposes that patients with shoulder impingement syndrome may have abnormal muscle synergy structure which can be used for assessment.
Subject(s)
Shoulder Impingement Syndrome , Shoulder Joint , Humans , Shoulder Impingement Syndrome/rehabilitation , Electromyography/methods , Shoulder/physiology , Shoulder Joint/physiology , Rotator Cuff/physiologyABSTRACT
Strengthening the rotator cuff muscles is important for injury prevention and rehabilitation. Since muscle fascicle length improves motor performance and is suggested to reduce the risk of injury for the hamstring, it may be an important variable to promote multidirectional changes in the function and macroscopic structure for the shoulder. Recent literature reviews overwhelmingly suggest that eccentric exercises improve fascicle length and functional measures for the lower limb. However, there is a research gap for the shoulder. Since ultrasound imaging is the most commonly used imaging technique to quantify muscle structure, but has yielded heterogeneous results in different studies, there is another issue and a research gap for the imaging method. Based on the research gaps, the purpose of this study was to evaluate the effects of standardized eccentric strength training on the function and structure of the external rotator cuff muscles using an isokinetic dynamometer and MRI. Therefore, a preliminary pre-post intervention study was conducted and 16 physically active men were recruited in October 2021. For the right shoulder, an eccentric isokinetic training was performed twice a week for almost six weeks. The primary outcome measures (external rotators) were active and passive range of motion, eccentric and concentric torque at 30, 60, and 180°/s isokinetic speed, and fascicle length and fascicle volume for the supraspinatus and infraspinatus muscles. The findings show a training effect for the absolute mean values of eccentric strength (+24%, p = .008). The torque-angle relationship increased, especially in the final phase of range of motion, although a 4% (p = .002) decrease in passive range of motion was found in the stretch test. Positive changes in muscle structure were shown for the supraspinatus muscle fascicle length (+16%, p = .003) and fascicle volume (+19%, p = .002). Based on the study results, we can conclude that eccentric isokinetic training has a significant positive effect on the shoulder. To our knowledge, this is the first eccentric training study using both isokinetic dynamometer and muscle diffusion tensor imaging to access functional and structural changes in the human shoulder rotator cuff muscles. The methods were shown to be applicable for interventional studies. Based on these results, populations such as high-performance handball players with highly trained shoulders should be included in future studies.