Effectiveness and safety of an innovative silicone extender in suture reinforcement or dermatotraction: a retrospective study.

OBJECTIVE: Multiple techniques are available for closing skin defects, such as skin grafts, flaps and tissue expansion. The tissue extender MID SEW (MID, France) was developed to achieve dermatotraction or suture reinforcement. The aim of this study was to evaluate the effectiveness and safety of this innovative silicone extender for large surgical wounds. METHOD: A single-centre retrospective and observational study on an unselected consecutive cohort of patients treated with a tissue extender was conducted. Indications, initial and final wound surfaces, and adverse events (AEs) were retrieved from electronic medical records. The main outcome measure was the time to complete wound closure. RESULTS: We identified 50 patients from July 2017 to December 2018. Patients underwent cutaneous tumour-wide excision (n=44), or pilonidal disease surgical treatment (n=6). The average initial wound area was 53.3±42.4cm2. Healing was complete, without secondary dehiscence, within the first seven days after device withdrawal for 41 patients (82%). At least one AE was experienced by eight patients (16%) during the study period: five inflammation; five wound dehiscence; two skin necrosis; and one pain. CONCLUSION: This case series suggests that the tissue extender may be effective and safe in its dermatotraction and suture reinforcement indications in the treatment of large wounds after wide excision of skin cancer or treatment of pilonidal disease. DECLARATION OF INTEREST: This work was supported in part by the Hospices Civils de Lyon, France and in part by the University Claude Bernard Lyon 1, France. OB co-owns the patent on the MID SEW system. The authors have no other conflicts of interest to declare.

[A study on the hearing protection and intervention effects of silicone earplug usage among manufacturing workers].

Objective: To assess the efficacy of silicone earplugs in protecting workers exposed to noise in a typical manufacturing environment, and to provide training interventions for workers who do not achieve the anticipated noise reduction levels, as well as examining the spectral characteristics of earplug attenuation. Methods: From June to August 2022, a total of 294 noise-exposed workers in two manufacturing enterprises equipped with the same type of earplug were studied by cluster sampling method, by conducting questionnaire surveys, collecting data, fitting tests, and providing trainings, the current noise exposure levels of workers in the industry as well as the perception about the earplug were understood. Additionally, the attenuation before and after intervention in workplace were measured, the spectral characteristics of noise reduction were were described and compared. Results: The percentage of workers with Personal Attenuation Rating (PAR) of 0 is 32.7% (96/294), and the baseline pass rates are all below 60%. There were no significant differences in pass rates based on gender, age, noise exposure, education level, or cognition of earplug effectiveness. After adjusting the way that earplugs are worn or changing the type of earplugs, all workers were able to meet their noise reduction requirements. The median PAR improvement for both companies is above 10 dB. The noise attenuation of the earplug vary with frequency, with lower attenuation at 4 000 Hz and higher attenuation at 8 000 Hz, showing some deviation from the nominal values. Conclusion: The difference between the actual sound attenuation value of earplugs and the nominal value is related to the noise frequency. When using silicone earplugs, attention should be paid to the spectral composition of the noise in the workplace.

Prospective, randomised clinical trial on the necessity of using a silicone intubarium in the context of endonasal-endoscopic dacryocystorhinostomy (EN-DCR) in patients with postsaccal lacrimal duct stenosis.

BACKGROUND: This prospective clinical study evaluates the effect of a silicone stent tube (SST) on the success rate of endonasal-endoscopic dacryocystorhinostomy (EN-DCR) to treat primary acquired nasolacrimal duct obstruction. METHODS: Patients were randomly assigned to receive EN-DCR with or without SST intubation over a period of 3 months. The surgery was performed using standardized techniques. Patients were assessed at three different timepoints: one day, 12 weeks and 24 weeks after the surgery. The results were compared in order to evaluate statistical differences. Surgical success was determined by means of positive irrigation procedures, as well as by the improvement of symptoms and a high level of patient satisfaction. RESULTS: A total of 56 randomized cases completed 24 weeks of follow up. 1 Patient dropped out due to malignant genesis of the nasolacrimal duct obstruction. After 24 weeks of follow up no statistically significant differences in levels of epiphora (p > .10) or patency (p > .16) were revealed. Comparisons regarding changes in time did not show levels of significance (p > .28). CONCLUSIONS: This study could not confirm a statistically significant benefit or disadvantage for SST Insertion in EN-DCR.

Thirty-Three-Year Follow-up Following Silicone Scaphoid Arthroplasty: A Case Report.

CASE: A 64-year-old man presented with a 3-year history of right wrist pain and swelling 33 years after a silicone scaphoid arthroplasty for chronic scaphoid nonunion. Radiographs demonstrated a deformed scaphoid implant, carpal and distal radius cysts, and mild carpal collapse. He elected to undergo a wrist arthrodesis with a dorsal fusion plate after failing conservative management. CONCLUSION: Although carpal bone silicone implant arthroplasties of the wrist have long been abandoned, our patient was pain free and fully functional for 3 decades. He was pleased to undergo serial examinations with radiographs for 30 years without any therapeutic intervention.

Engineering superhydrophobicity: a survey of coating techniques for silicone-based oil-water separation membranes.

Oil spills in the ocean and the release of contaminated wastewater from industries cause significant harm to the ecosystem and water sources. To tackle this environmental problem, oil-water mixture separation has been the subject of extensive research over the past few decades. Improving oil absorbents is crucial in removing organic contaminants from wastewater produced by industrial activities. To this end, there is an increasing need for materials that can efficiently and flexibly recover oils from contaminated ocean waters, industrial wastewater, and other sources. Silicones are often used for this purpose because of their exceptional mechanical and thermal durability, as well as their low toxicity. The materials produced from silicones, such as foam, sponge, or substrate, exhibit excellent oil-absorbing properties (maximum oil absorption range, 23.2-77 g/g) and outstanding compression cycles. This article review highlights the advancements in the manufacturing of silicone-based products that have been extensively researched for oil-water separation. Understanding the interdependencies that determine the structure, performance, and manufacturing strategy is essential to producing selective oil absorbents with more commercial potential in the future. Recycling of silicones has also become increasingly important as a goal for the circular economy.

Silicone Bioadhesive with Shear-Stiffening Effect: Rate-Responsive Adhesion Behavior and Wound Dressing Application.

Stimuli-responsive adhesives with on-demand adhesion capabilities are highly advantageous for facilitating wound healing. However, the triggering conditions of stimuli-responsive adhesives are cumbersome, even though some of them are detrimental to the adhesive and adjacent natural tissues. Herein, a novel stimuli-responsive adhesive called shear-stiffening adhesive (SSA) has been created by constructing a poly(diborosiloxane)-based silicone network for the first time, and SSA exhibits a rate-responsive adhesion behavior. Furthermore, we introduced bactericidal factors (PVP-I) into SSA and applied it as a wound dressing to promote the healing of infected wounds. Impressively, the wound dressing not only has excellent biocompatibility and long-term antibacterial properties but also performs well in accelerating wound healing. Therefore, this study provides a new strategy for the synthesis of intelligent adhesives with force rate response, which simplifies the triggering conditions by the force rate. Thus, SSA has great potential to be applied in wound management as an intelligent bioadhesive with on-demand adhesion performance.

[Post-Covid Syndrome, Sick Building Syndrome, Silicone Breast Syndrome, Choric Fatigue Syndrome, Fibromyalgia -Autoimmunity to the Autonomic Nervous System].

INTRODUCTION: Post-Covid Syndrome, Sick Building Syndrome, Silicone Breast Syndrome, Choric Fatigue Syndrome, Fibromyalgia -Autoimmunity to the Autonomic Nervous System.

Skin integrity preservation using a nurse-constructed silicone adhesive Foley catheter.

AIMS: Skin breakdown is common in the intensive care unit (ICU). This pilot evaluation aimed to determine whether a nurse-constructed urinary catheter securement device using a silicone adhesive could reduce the complications of blistering and other skin breakdowns in a high-risk ICU population with Foley catheters. DESIGN: A prospective, non-randomised performance improvement study using a convenience sample was carried out. SUBJECTS AND SETTING: The study sample consisted of 29 patients with urethral Foley catheters and any degree of thigh oedema in a surgical ICU at an academic quarternary medical center. METHODS: Patients were fitted with a standard acrylic-adhesive catheter securement device on one thigh and a nurse-constructed device on the contralateral thigh. At the beginning of each 12-hour shift, the nurse moved the Foley catheter from one securement device to the other; the nurse recorded the assessment findings at the end of the shift. RESULTS: The average age of the 29 patients was 61±16 (range 20-87) years. Visible skin compromise occurred in 21% of the time with the standard acrylic securement device; an equal percentage of men and women developed skin breakdown. Oedema status was a significant factor related to skin breakdown. There was no visible damage to the skin associated with the nurse-constructed silicone-adhesive device. CONCLUSIONS: A silicone adhesive urinary catheter securement device causes less skin damage than one with acrylic adhesive. One-step application, pain-free and atraumatic removal, and reliable securement are essential considerations in product development.

An alternative silicone-based passive sampling device to derive organotin concentrations in the aqueous phase.

Organotin compounds (OTs) are well studied in various environmental compartments, with a critical focus on the water column as their primary entry point into aquatic ecosystems. In this context, a method for the analysis of organotin (OTs) in water using silicone rubber-based passive sampling was optimized, validated, and field-tested. Validation covered crucial parameters, including the limit of detection (LOD), limit of quantification (LOQ), accuracy, precision, linearity, and matrix effect. The method was shown to be robust (R2 ≥ 0.99), with recoveries between 70.2 and 114.6%, and precise (CV < 12.8%) (N = 3). LODCw and LOQCw were ≤15 and ≤ 48 pg Sn L-1, respectively, for TBT and TPhT. The matrix effect showed to be low (>-20% ME < 20%) for all OTs but TPhT (69.4%). The silicone rubber-water partition coefficients (Log Ksr,w) were estimated at 3.37 for MBT, 3.77 for DBT, 4.17 for TBT, 3.49 for MPhT, 3.83 for DPhT, and 4.22 for TPhT. During the field study carried out between October 2021 and February 2022 at the entrance of the Port of Santos navigation channel (Southeastern Brazil), sampling rates ranged between 4.1 and 4.6 L d-1, and the equilibrium was achieved for MBT, DBT, MPhT, and DPhT after ∼45 days of deployment. The freely dissolved concentrations varied between 134 and 165 pg Sn L-1 for TBT, 388 and 610 pg Sn L-1 for DBT, and 1114 and 1509 pg Sn L-1 for MBT, while MPhT, DPhT, and TPhT were below the limit of detection. Results pointed out that J-FLEX® rubber-based passive sampling is a suitable and reliable alternative method for the continuous monitoring of OTs in the water column.

Characterization of fire investigators' polyaromatic hydrocarbon exposures using silicone wristbands.

BACKGROUND: Exposures to polyaromatic hydrocarbons (PAHs) contribute to cancer in the fire service. Fire investigators are involved in evaluations of post-fire scenes. In the US, it is estimated that there are up to 9000 fire investigators, compared to approximately 1.1 million total firefighting personnel. This exploratory study contributes initial evidence of PAH exposures sustained by this understudied group using worn silicone passive samplers. OBJECTIVES: Evaluate PAH exposures sustained by fire investigators at post-fire scenes using worn silicone passive samplers. Assess explanatory factors and health risks of PAH exposure at post-fire scenes. METHODS: As part of a cross-sectional study design, silicone wristbands were distributed to 16 North Carolina fire investigators, including eight public, seven private, and one public and private. Wristbands were worn during 46 post-fire scene investigations. Fire investigators completed pre- and post-surveys providing sociodemographic, occupational, and post-fire scene characteristics. Solvent extracts from wristbands were analyzed via gas chromatography-mass spectrometry (GC-MS). Results were used to estimate vapor-phase PAH concentration in the air at post-fire scenes. RESULTS: Fire investigations lasted an average of 148 minutes, standard deviation ± 93 minutes. A significant positive correlation (r=0.455, p<.001) was found between investigation duration and PAH concentrations on wristbands. Significantly greater time-normalized PAH exposures (p=0.039) were observed for investigations of newer post-fire scenes compared to older post-fire scenes. Regulatory airborne PAH exposure limits were exceeded in six investigations, based on exposure to estimated vapor-phase PAH concentrations in the air at post-fire scenes. DISCUSSION: Higher levels of off-gassing and suspended particulates at younger post-fire scenes may explain greater PAH exposure. Weaker correlations are found between wristband PAH concentration and investigation duration at older post-fire scenes, suggesting reduction of off-gassing PAHs over time. Exceedances of regulatory PAH limits indicate a need for protection against vapor-phase contaminants, especially at more recent post-fire scenes.

Antimicrobial Functionalization of Silicone-graft-poly(N-vinylimidazole) Catheters.

In this work, we present the modification of a medical-grade silicone catheter with the N-vinylimidazole monomer using the grafting-from method at room temperature and induced by gamma rays. The catheters were modified by varying the monomer concentration (20-100 vol%) and the irradiation dose (20-100 kGy). Unlike the pristine material, the grafted poly(N-vinylimidazole) chains provided the catheter with hydrophilicity and pH response. This change allowed for the functionalization of the catheters to endow it with antimicrobial features. Thus, the quaternization of amines with iodomethane and bromoethane was performed, as well as the immobilization of silver and ampicillin. The inhibitory capacity of these materials, functionalized with antimicrobial agents, was challenged against Escherichia coli and Staphylococcus aureus strains, showing variable results, where loaded ampicillin was amply better at eliminating bacteria.

Treatment of mixed and refractory post-tuberculosis tracheobronchial stenosis with L-shaped silicone stents: case series and a literature review.

The two patients included in the study had mixed and refractory post-tuberculosis tracheobronchial stenosis (PTTS), having experienced unsuccessful interventional therapies such as balloon dilation and V-shaped stent placement before the operation. Following the secure placement of L-shaped silicone stents, examinations with a fiberbronchoscope during the first and third months post-operation revealed a significant reduction in bronchial mucosa inflammation for both patients. Additionally, the opening diameter of the upper and lower branch segments increased, and chest CT scans indicated a noticeable absorption of left pulmonary lesions. Three months post-operation, fiberbronchoscopy confirmed the stable fixation of the stent without any movement. The patients exhibited substantial improvements in pulmonary function, dyspnea index, and blood gas analysis, with no reported adverse complications. After 7 months, a follow-up fiberbronchoscope for one case revealed excellent stent fixation. Simultaneously, the chest CT scan indicated favorable re-expansion. The placement of L-shaped silicone stents proves effective in preventing displacement, alleviating airway stenosis or obstruction, and ensuring the safety and efficacy of PTTS treatment - particularly in cases where V-shaped silicone stent placement has failed. To our knowledge, this is the first study describing the L-shaped silicone stent in two patients with PTTS.

Successful treatment of severe airway narrowing due to tuberculosis using special L-shaped silicone stentsThis article tells the story of two patients who suffered from a complex lung condition called post-tuberculosis tracheobronchial stenosis (PTTS). Imagine your airways - the tubes that carry air to your lungs - getting severely scarred and narrowed due to a past bout with tuberculosis. These two patients had tried previous treatments like balloon dilation (where a small balloon is inflated inside the narrowed airway to widen it) and using V-shaped stents (flexible supports placed in the airway to keep it open), but these methods didn't provide lasting relief. In this innovative approach, doctors used L-shaped silicone stents specifically designed to fit in the affected parts of the patients' airways. After placing these stents, regular checks showed remarkable improvements. The swelling in the airway lining reduced significantly, and the openings leading to the upper and lower parts of the lungs got wider. Chest X-rays (CT scans) even showed that the patient's left lung was healing well. Three months later, the stents stayed firmly in place, and neither patient experienced any problems. Breathing became easier, lung function tests improved, and blood tests showed better oxygen levels. Seven months down the line, one patient continued to do extremely well, with the stent securely fixed and the chest scan showing good lung expansion. This groundbreaking study shows that using L-shaped silicone stents can effectively treat PTTS when other methods fail. Not only do they stay in place, preventing blockages, but they also safely and effectively alleviate narrowing of the airways. It's the first time such L-shaped stents have been used successfully in PTTS patients, offering new hope for those facing similar challenges.

Assessing neophyte response to daily disposable silicone hydrogel contact lenses: A randomised clinical trial investigation over one month.

OBJECTIVE: This randomised clinical trial assessed the impact on symptoms, tear film dynamics and ocular surface integrity of daily disposable silicone-hydrogel contact lenses (CLs) over a month, paying special attention to lid wiper epitheliopathy (LWE) and its implications for CL discomfort. METHODS: Neophyte CL wearers (n = 44, 21.09 ± 5.00 years old) were randomly assigned to either the experimental (n = 24) or control group (n = 20). Participants assigned to the experimental group were required to wear daily disposable CLs for 1 month for at least 8 h/day and 6 days/week. All participants were healthy subjects (no history of ocular surgery or active ocular disease) with spherical refractive errors between -8.00 and +5.00 D and cylindrical power <0.75 D. At the baseline and 1-month sessions, the Dry Eye Questionnaire 5 (DEQ-5) was completed, together with the measurement of tear film osmolarity with the TearLab osmometer, tear meniscus height (TMH) and lipid layer pattern (LLP) using a slit-lamp with Tearscope Plus attached, fluorescein break-up time (FBUT), maximum blink interval (MBI), corneal staining with fluorescein under cobalt blue light and LWE with lissamine green under slit lamp and halogen white light. RESULTS: At the baseline session, LWE showed a negative correlation with DEQ-5 (r = -0.37, p = 0.02). Significant differences in FBUT and LWE (p = 0.04) and a positive correlation between LWE and DEQ-5 (r = 0.49, p = 0.007) were observed at 1 month. Intrasession analysis at 1 month showed significant differences between the experimental and control groups in DEQ-5, FBUT and LWE (all p ≤ 0.02). Intersession analysis in the experimental group showed variations in DEQ-5, FBUT and LWE (all p ≤ 0.02) but no significant variation in the control group (all p ≥ 0.11). CONCLUSION: The presence of LWE was significantly correlated with higher symptom values in the DEQ-5. Also, participants in the experimental group presented higher values of LWE after 1 month of CL wear, in comparison with the control group.

Development and application of a protocol for extractables profiling from central venous catheters in neonates.

Peripherally inserted central catheters (PICC-lines) used in neonatology are made of thermoplastic polyurethane (TPU) or silicone. These materials usually contain substances that may leach into drug vehicles or blood. In this extractables study, we determined the optimal extraction conditions using TPU films containing defined amounts of butylhydroxytoluene (BHT) and then applied them on unused and explanted PICC-lines. Maceration and sonication tests were carried out with hexane, acetone and water as the extraction solvents. The analyses were performed using gas and liquid chromatography coupled with mass spectrometry detectors, as well as inductive coupled plasma optical emission spectroscopy to detect a wide range of extractables. We selected a limited list of substances to be sought from the usual adjuvants and monomers, related to their carcinogenic, mutagenic or reprotoxic properties and/or existence in endocrine disruptors lists. The TPU-film experiments showed that acetone was slightly better than hexane, and maceration better than sonication. When applied to PICC-lines, the extraction methods were almost similar but acetone was clearly better than hexane for TPU. From the 48 peaks initially observed in GC-MS, we ended up with 37 peaks to follow in TPU PICC-lines, among which were those of BHT and 4,4'-Methylenebis(cyclohexyl isocyanate) isomers. For silicone PICC-lines, out of 41 peaks initially observed in GC-MS, we followed 20 peaks, most of them being identified as cyclosiloxanes. Barium was the main inorganic element extracted for both PICC-lines. For TPU PICC-lines, the inter-batch variability was higher than for intra-batch, but in silicone devices both were similar. When compared to new PICC-lines, explanted TPU PICC-lines extracted peaks had a lower area under the curve (AUC), while the AUCs of the peaks were higher for the majority of silicone PICC-lines extract compounds. No identified substances were detected above their toxicological threshold, but isocyanates and cyclosiloxanes toxicity was mostly studied for other exposition routes than intravenous. The methods defined in this study were efficient in producing extractable profiles from both PICC-lines.

Comparative Analysis of Silicone Tube Intubation Versus Probing and Balloon Dilation for Congenital Nasolacrimal Duct Obstruction: A Systematic Review and Meta-Analysis.

OBJECTIVE: Congenital nasolacrimal duct obstruction (CNLDO) is a pediatric disorder with a wide range of pathology. If untreated, the condition may end up with serious complications. Multiple treatment options for CNLDO exist throughout the literature, and there is an ongoing debate on the best intervention for each disease subgroup and the best timing of such interventions. This study compares the success and failure rates of silicone tube intubation (STI) against probing and balloon dilation (BD). METHODS: The authors searched the literature for relevant articles using PubMed, Scopus, web of Science, and Cochrane Library until January 2024. Using RevMan 5.4, the authors compared STI's success and failure rates to probing and BD using risk ratios (RRs) and a random-effect model. In addition, the complication rate of monocanalicular intubation (MCI) versus bicanalicular intubation (BCI) was investigated. The authors used the leave-one-out method to check for influential studies and to resolve heterogeneity. RESULTS: The screening process resulted in 23 eligible articles for inclusion in the authors' review. Silicone tube intubation had a higher chance of resolving the symptoms of CNLDO than probing (RR = 1.11; 95% CI: 1.04, 1.20; P = 0.004) while having less risk of surgical failure (RR = 0.48; 95% CI: 0.30, 0.76; P = 0.002]. Monocanalicular intubation showed no statistically significant difference when compared with BCI in terms of surgical success and failure; however, MCI had a lower risk of complications (RR = 0.68; 95% CI: 0.48, 0.97; P = 0.04). In addition, STI did not demonstrate any significant difference from BD. CONCLUSION: There was no significant difference in success/failure between MCI and BCI; monocanalicular had fewer complications. Silicone tube intubation did better in terms of surgical success than probing, especially in children over 12 months, suggesting that it is the preferred intervention for older patients with CNLDO.

Design and fabrication of silicone cleft lip simulation model for personalized surgical training.

PURPOSE OF THE STUDY: To elucidate the design and fabrication methodologies employed in creating a personalized cleft lip simulation model, primarily intended for enhancing surgical training and diverse applications. The study further sought to assess the viability of integrating this simulation model into undergraduate oral experiments and instructional settings. STUDY DESIGN: Facial data from individuals with cleft lip conditions were acquired using a scanner. Subsequent stages involved reverse engineering and the utilization of 3D printing technology to generate a cleft lip silicone simulation model. The molding process entailed injecting silicone into a polylactic acid mold. The study enrolled 53 undergraduate students majoring in dentistry, who were randomly assigned to either a control or experimental group. A dedicated instructor guided each group independently, employing a combination of multiple-choice tests and surveys to gauge real-time evaluations and discern inter-group disparities. RESULTS AND CONCLUSIONS: We successfully designed and produced a personalized cleft lip simulation model, demonstrating notable efficacy in the context of cleft lip experimental teaching. Statistical analysis revealed a significant difference (P < 0.05) in the scores of the experimental group students on multiple-choice questions pertaining to cleft lip surgical procedures. Survey outcomes indicated that the experimental group students exhibited higher confidence levels in cleft lip surgery, as reflected from their responses to relevant questions, compared to the traditional group students. These differences were statistically significant (P < 0.05). The simulation model developed in this study emerges as a reliable and cost-effective training and teaching tool for cleft lip surgery.

Evaluation of rheological properties of soft lining materials with different composition under various temperatures.

PURPOSE: The aim of this in vitro study was to evaluate the changes the rheological properties of some soft lining materials, to compare the rheological properties and viscoelastic behaviour at different temperatures. MATERIALS AND METHODS: Five soft lining materials (acrylic and silicone based) were used. the storage modulus (G'), loss modulus (G"), tan delta (tan δ) and complex viscosity (η') were chosen and for each material, measurements were repeated at 23, 33 and 37  °C, using an oscillating rheometer. All data were statistically analyzed using the Mann Whitney U test, Kruskal Wallis test and Conover's Multiple Comparison test at the significance level of 0.05. RESULTS: Soft lining materials had different viscoelastic properties and most of the materials showed different rheological behavior at 23, 33 and 37  °C. At the end of the test (t¹5), at all the temperatures, Sofreliner Tough M had the highest storage modulus values while Visco Gel had the highest loss Tan delta values. CONCLUSIONS: There were significant changes in the rheological parameters of all the materials. Also temperature affected the initial rheological properties, and polymerization reaction of all the materials, depending on temperature increase. CLINICAL IMPLICATIONS: Temperature affected the initial rheological properties, and polymerization reaction of soft denture liner materials, and clinical inferences should be drawn from such studies conducted. It can be recommended to utilize viscoelastic acrylic-based temporary soft lining materials with lower storage modulus, higher tan delta value, and high viscosity in situations where pain complaint persists and tissue stress is extremely significant, provided that they are replaced often.

Customized Silicone Foam Dressing Under Noninvasive Ventilation and Skincare Bundle to Reduce Hospital-Acquired Pressure Injuries in Neonates.

In a sixty-eight-bed level-IV NICU, an increased incidence of hospital-acquired pressure injuries (HAPIs) from noninvasive ventilation (NIV) devices was identified. The aim of this quality improvement project was to decrease HAPIs from NIV by 10%. A literature review and the Plan-Do-Study-Act were implemented. The intervention included a customized silicone foam dressing under NIV, an NIV skincare bundle, and multidisciplinary support. Hospital-acquired pressure injury rates were tracked over 3 years postinterventions. The incidence of HAPIs declined by 20% from 0.2 per 1,000 patient days to 0.05 per 1,000 patient days. Relative risk was 4.6 times greater prior to intervention (p = .04). Continuous positive airway pressure (CPAP) failure was not noted and measured by the percentage of patients on ventilators pre- and postintervention. Customized silicone foam dressings under NIV, NIV skincare bundle, and multidisciplinary team support may decrease HAPIs in neonates without CPAP failure.

Altered Foreign Body Response at the Posterior Surface Compared to the Anterior Surface of Human Silicone Breast Implants.

Soft implantable devices are crucial to optimizing form and function for many patients. However, periprosthetic capsule fibrosis is one of the major challenges limiting the use of implants. Currently, little is understood about how spatial and temporal factors influence capsule physiology and how the local capsule environment affects the implant structure. In this work, we analyzed breast implant capsule specimens with staining, immunohistochemistry, and real-time polymerase chain reaction to investigate spatiotemporal differences in inflammation and fibrosis. We demonstrated that in comparison to the anterior capsule against the convex surface of breast implants, the posterior capsule against the flat surface of the breast implant displays several features of a dysregulated foreign body reaction including increased capsule thickness, abnormal extracellular remodeling, and infiltration of macrophages. Furthermore, the expression of pro-inflammatory cytokines increased in the posterior capsule across the lifespan of the device, but not in the anterior capsule. We also analyzed the surface oxidation of breast explant samples with XPS analysis. No significant differences in surface oxidation were identified either spatially or temporally. Collectively, our results support spatiotemporal heterogeneity in inflammation and fibrosis within the breast implant capsule. These findings presented here provide a more detailed picture of the complexity of the foreign body reaction surrounding implants destined for human use and could lead to key research avenues and clinical applications to treat periprosthetic fibrosis and improve device longevity.

Silicone implant surface microtopography modulates inflammation and tissue repair in capsular fibrosis.

Excessive fibrous capsule formation around silicone mammary implants (SMI) involves immune reactions to silicone. Capsular fibrosis, a common SMI complication linked to host responses, worsens with specific implant topographies. Our study with 10 patients investigated intra- and inter-individually, reduced surface roughness effects on disease progression, wound responses, chronic inflammation, and capsular composition. The results illuminate the significant impact of surface roughness on acute inflammatory responses, fibrinogen accumulation, and the subsequent fibrotic cascade. The reduction of surface roughness to an average roughness of 4 µm emerges as a promising approach for mitigating detrimental immune reactions, promoting healthy wound healing, and curbing excessive fibrosis. The identified proteins adhering to rougher surfaces shed light on potential mediators of pro-inflammatory and pro-fibrotic processes, further emphasizing the need for meticulous consideration of surface design. The composition of the implant capsule and the discovery of intracapsular HSP60 expression highlight the intricate web of stress responses and immune activation that can impact long-term tissue outcomes.