Role of Plastic Surgery in the Treatment of Titanium Mesh Exposure Following Cranioplasty.

BACKGROUND: Titanium mesh cranioplasty is the most common strategy for the repair of skull defects. However, as the frequency of cranioplasty increases, the incidence of titanium mesh exposure following cranioplasty increases as well. This study aimed to investigate the methods and outcomes of plastic surgery in the management of titanium mesh exposure following cranioplasty. METHODS: Patients with titanium mesh exposure following cranioplasty were retrospectively selected from January 2016 to August 2021. Titanium mesh exposure was corrected with reconstructive plastic surgery, including skin grafting, expander insertion, partial removal of the exposed mesh, replacement of the mesh, or flap transplantation. RESULTS: This study included 21 patients with titanium mesh exposure with surgical site infection and a variant of scalp deformity. The age of the patients ranged from 18 to 74 years, with the mean age being 54 years. All patients underwent reconstructive plastic surgery and exhibited complete wound healing. The follow-up period ranged from 17 to 90 months. One patient experienced titanium mesh re-exposure and subsequently underwent an additional procedure for the partial removal of the exposed mesh. No serious complications were observed postoperatively. CONCLUSION: Reconstructive plastic surgery can facilitate wound healing at the titanium mesh exposure site following cranioplasty. However, an individualized treatment strategy is required for each patient, and complications should be managed by adopting standard measures.

Shape variation in cranium, mandible and teeth in selected mouse strains.

There are different strains of laboratory mouse used in many different fields. These strains differ anatomically. In order to determine these anatomical differences, shape analysis was conducted according to species. CD-1, C57bl/6 and Balb-c strains were preferred to study these differences. Forty-eight adult mouse strains belonging to these strains were utilized. The bones were photographed and geometric morphometry was applied to these photographs. Principal Component Analysis was applied to determine shape variations. In Principal component 1 for cranium, CD-1 and C57bl/6 strain groups showed different shape variations, while Balb-c strain group showed similar shape variations to the other strain groups. Principal Component 1 for the mandible separated the CD-1 and C57bl/6 strain groups in terms of shape variation. Principal Component 2 explained most of the variation between the C57bl/6 and CD-1 lineage groups. In PC1 for molars, the CD-1 group showed a different shape variation from the other groups. Mahalanobis distances and Procrustes distances were measured using Canonical variance analysis to explain the differences between the lineage groups. These measurements were statistically significant. For cranium, in canonical variate 1, CD-1 group of mouse and Balb-c group of mouse were separated from each other. In canonical variate 2, C57bl/6 group of mouse were separated from the other groups. For mandible, Balb-c group of mouse in canonical variate 1 and CD-1 group of mouse in canonical variate 2 were separated from the other groups. For molars, CD-1 group of mouse in canonical variate 1 and Balb-c group of mouse in canonical variate 2 were separated from the other groups. It was thought that these anatomical differences could be caused by genotypic factors as well as dietary differences and many different habits that would affect the way their muscles work.

The Frequency of Occipital Spurs in Relation to the Cephalic Index: An Anatomorphometric Cone Beam CT Study.

BACKGROUND: The occipital spur (OS) can be described as an abnormal elongation of the external occipital protuberance (EOP). The cephalic index (CI) refers to the ratio of width to length in any skull. AIM: The aim of the present study was to evaluate the frequency and types of OS. It also aimed to determine the mean CI and the distribution of skull types using cone beam computed tomography (CBCT). And to determine if there was a relationship between the cephalic index and the presence and types of OS. METHODS: CBCT scans from 523 patients were included in the study. OSs were classified as type 1 (flat), type 2 (crest), and type 3 (spine). Skull length and width were measured on axial sections and the CI was calculated. Based on the cephalic index (CI), skull types were classified as dolichocephalic (CI < 75), mesocephalic (75 < CI < 80), brachycephalic (80 < CI < 85), and hyperbrachycephalic (CI > 85). RESULTS: The most common cranial types in the study group were brachycephalic (44.7%), mesocephalic (28.3%), hyperbrachycephalic (21.2%), and dolichocephalic (5.7%). Regarding the presence of OS, 54.3% of the participants had no OS, 23.1% had flat type, 15.3% had crest type, and 7.2% had spin type OS. There was a statistically significant difference (P < 0.05) in the frequency of OS according to skull type. CONCLUSION: This study, the first to evaluate CI and OS using CBCT, concludes that brachycephaly is the most common cranial type. OS is more common in mesocephalic and dolichocephalic skulls, at older ages, and in males.

Cranioplasty in Oman: Retrospective review of cases from the National Craniofacial Center 2012-2022.

Objectives: Cranioplasty is a complex craniofacial and neurosurgical procedure that aims to reinstate the architecture of the cranial vault and elevate both its aesthetic and neurological function. Several reconstructive materials have been thoroughly explored in the search for the optimal solution for cranioplasty. This study aimed to evaluate different material used for cranial reconstruction in Oman. Methods: This retrospective study included all patients who had had cranioplasty procedures performed at Khoula Hospital, Muscat, Oman, from 2012 to 2022. Demographic information, the characteristics of the cranial defect and any complications that occurred post-operatively were analysed. Results: A total of 47 patients were included in this study. The most common cause of cranial defects was craniectomy following traumatic head injury (70.2%) along with excision of fibrous dysplasia (10.6%). The most frequently utilised material for cranial repair was autologous bone grafts (n = 28), followed by polyetheretherketone (PEEK; n = 14). Interestingly, the replacement of bone grafts from previous craniectomy showed a notably high resorption rate (71.4%), in contrast to split calvarial grafts (0%) and other types of bone grafts (14.3%). Additionally, delayed graft infection was observed in 3.6% of the bone graft group and 7.1% of the PEEK group. Conclusion: Patient-specific alloplastic implants such as PEEK have gained popularity for large and complex cranioplasty, as they provide excellent aesthetic outcomes and leave no donor site morbidity. In contrast, bone grafts remain the gold standard for small to medium-sized cranial defects.

Angiogenesis is uncoupled from osteogenesis during calvarial bone regeneration.

Bone regeneration requires a well-orchestrated cellular and molecular response including robust vascularization and recruitment of mesenchymal and osteogenic cells. In femoral fractures, angiogenesis and osteogenesis are closely coupled during the complex healing process. Here, we show with advanced longitudinal intravital multiphoton microscopy that early vascular sprouting is not directly coupled to osteoprogenitor invasion during calvarial bone regeneration. Early osteoprogenitors emerging from the periosteum give rise to bone-forming osteoblasts at the injured calvarial bone edge. Microvessels growing inside the lesions are not associated with osteoprogenitors. Subsequently, osteogenic cells collectively invade the vascularized and perfused lesion as a multicellular layer, thereby advancing regenerative ossification. Vascular sprouting and remodeling result in dynamic blood flow alterations to accommodate the growing bone. Single cell profiling of injured calvarial bones demonstrates mesenchymal stromal cell heterogeneity comparable to femoral fractures with increase in cell types promoting bone regeneration. Expression of angiogenesis and hypoxia-related genes are slightly elevated reflecting ossification of a vascularized lesion site. Endothelial Notch and VEGF signaling alter vascular growth in calvarial bone repair without affecting the ossification progress. Our findings may have clinical implications for bone regeneration and bioengineering approaches.

Age Estimation by Machine Learning and CT-Multiplanar Reformation of Cranial Sutures in Northern Chinese Han Adults.

OBJECTIVES: To establish age estimation models of northern Chinese Han adults using cranial suture images obtained by CT and multiplanar reformation (MPR), and to explore the applicability of cranial suture closure rule in age estimation of northern Chinese Han population. METHODS: The head CT samples of 132 northern Chinese Han adults aged 29-80 years were retrospectively collected. Volume reconstruction (VR) and MPR were performed on the skull, and 160 cranial suture tomography images were generated for each sample. Then the MPR images of cranial sutures were scored according to the closure grading criteria, and the mean closure grades of sagittal suture, coronal sutures (both left and right) and lambdoid sutures (both left and right) were calculated respectively. Finally taking the above grades as independent variables, the linear regression model and four machine learning models for age estimation (gradient boosting regression, support vector regression, decision tree regression and Bayesian ridge regression) were established for northern Chinese Han adults age estimation. The accuracy of each model was evaluated. RESULTS: Each cranial suture closure grade was positively correlated with age and the correlation of sagittal suture was the highest. All four machine learning models had higher age estimation accuracy than linear regression model. The support vector regression model had the highest accuracy among the machine learning models with a mean absolute error of 9.542 years. CONCLUSIONS: The combination of skull CT-MPR and machine learning model can be used for age estimation in northern Chinese Han adults, but it is still necessary to combine with other adult age estimation indicators in forensic practice.

Fluorinated hydroxyapatite conditions a favorable osteo-immune microenvironment via triggering metabolic shift from glycolysis to oxidative phosphorylation.

BACKGROUND: Biological-derived hydroxyapatite is widely used as a bone substitute for addressing bone defects, but its limited osteoconductive properties necessitate further improvement. The osteo-immunomodulatory properties hold crucial promise in maintaining bone homeostasis, and precise modulation of macrophage polarization is essential in this process. Metabolism serves as a guiding force for immunity, and fluoride modification represents a promising strategy for modulating the osteoimmunological environment by regulating immunometabolism. In this context, we synthesized fluorinated porcine hydroxyapatite (FPHA), and has demonstrated its enhanced biological properties and osteogenic capacity. However, it remains unknown whether and how FPHA affects the immune microenvironment of the bone defects. METHODS: FPHA was synthesized and its composition and structural properties were confirmed. Macrophages were cultured with FPHA extract to investigate the effects of FPHA on their polarization and the related osteo-immune microenvironment. Furthermore, total RNA of these macrophages was extracted, and RNA-seq analysis was performed to explore the underlying mechanisms associated with the observed changes in macrophages. The metabolic states were evaluated with a Seahorse analyzer. Additionally, immunohistochemical staining was performed to evaluate the macrophages response after implantation of the novel bone substitutes in critical size calvarial defects in SD rats. RESULTS: The incorporation of fluoride ions in FPHA was validated. FPHA promoted macrophage proliferation and enhanced the expression of M2 markers while suppressing the expression of M1 markers. Additionally, FPHA inhibited the expression of inflammatory factors and upregulated the expression of osteogenic factors, thereby enhancing the osteogenic differentiation capacity of the rBMSCs. RNA-seq analysis suggested that the polarization-regulating function of FPHA may be related to changes in cellular metabolism. Further experiments confirmed that FPHA enhanced mitochondrial function and promoted the metabolic shift of macrophages from glycolysis to oxidative phosphorylation. Moreover, in vivo experiments validated the above results in the calvarial defect model in SD rats. CONCLUSION: In summary, our study reveals that FPHA induces a metabolic shift in macrophages from glycolysis to oxidative phosphorylation. This shift leads to an increased tendency toward M2 polarization in macrophages, consequently creating a favorable osteo-immune microenvironment. These findings provide valuable insights into the impact of incorporating an appropriate concentration of fluoride on immunometabolism and macrophage mitochondrial function, which have important implications for the development of fluoride-modified immunometabolism-based bone regenerative biomaterials and the clinical application of FPHA or other fluoride-containing materials.

MiR-26b-5p/TET3 regulates the osteogenic differentiation of human bone mesenchymal stem cells and bone reconstruction in female rats with calvarial defects.

BACKGROUND: MicroRNAs (miRNAs) play critical roles in the osteogenic differentiation of human bone mesenchymal stem cells (hBMSCs), but the mechanism by which miRNAs indirectly modulate osteogenesis remains unclear. Here, we explored the mechanism by which miRNAs indirectly modulate gene expression through histone demethylases to promote bone regeneration. METHODS AND RESULTS: Bioinformatics analysis was performed on hBMSCs after 7 days of osteogenic induction. The differentially expressed miRNAs were screened, and potential target mRNAs were identified. To determine the bioactivity and stemness of hBMSCs and their potential for bone repair, we performed wound healing, Cell Counting Kit-8 (CCK-8), real-time reverse transcription quantitative polymerase chain reaction (RT‒qPCR), alkaline phosphatase activity, alizarin red S (ARS) staining and radiological and histological analyses on SD rats with calvarial bone defects. Additionally, a dual-luciferase reporter assay was utilized to investigate the interaction between miR-26b-5p and ten-eleven translocation 3 (TET3) in human embryonic kidney 293T cells. The in vitro and in vivo results suggested that miR-26b-5p effectively promoted the migration, proliferation and osteogenic differentiation of hBMSCs, as well as the bone reconstruction of calvarial defects in SD rats. Mechanistically, miR-26b-5p bound to the 3' untranslated region of TET3 mRNA to mediate gene silencing. CONCLUSIONS: MiR-26b-5p downregulated the expression of TET3 to increase the osteogenic differentiation of hBMSCs and bone repair in rat calvarial defects. MiR-26b-5p/TET3 crosstalk might be useful in large-scale critical bone defects.

Comparative skull osteology of Amphisbaena arda and Amphisbaena vermicularis (Squamata: Amphisbaenidae).

The skull anatomy of amphisbaenians directly influences their capacity to burrow and is crucial for the study of their systematics, which ultimately contributes to our comprehension of their evolution and ecology. In this study, we employed three-dimensional X-ray computed tomography to provide a detailed description and comprehensive comparison of the skull anatomy of two amphisbaenian species with similar external morphology, Amphisbaena arda and Amphisbaena vermicularis. Our findings revealed some differences between the species, especially in the sagittal crest of the parietal bone, the ascendant process, and the transverse occipital crest of the occipital complex. We also found intraspecific variation within A. vermicularis, with some specimens displaying morphology that differed from their conspecifics but not from A. arda. The observed intraspecific variation within A. vermicularis cannot be attributed to soil features because all specimens came from the same locality. Specimen size and soil type may play a role in the observed differences between A. arda and A. vermicularis, as the single A. arda specimen is the largest of our sample and soil type and texture differ between the collection sites of the two species.

Skull asymmetry in various sheep breeds: Directional asymmetry and fluctuating asymmetry.

Sheep (Ovis aries) play an important role in the economy of Turkey and the Balkan Peninsula due to their use in farming. As a domesticated species, sheep's morphometric and morphological diversity is likely determined by selective breeding practices rather than geographic distribution. This study aimed to analyse four different sheep breed skulls and reveal skull asymmetry using geometric morphometric methods. For this purpose, 2D images of 52 sheep skulls from different breeds were analysed from the dorsal view of the skull, using 28 landmarks. In the comparison of sheep skulls from the dorsal view, the first principal components for directional asymmetry (DA) and fluctuating asymmetry (FA) were 32.98% and 39.62% of the total variation, respectively. Sharri and Ivesi (Awassi) sheep breeds had the broadest distribution of skull shapes among the breeds, while Lara e Polisit was the most conservative breed. DA was used as a measure of biomechanical constraints, and FA was used as an indicator of environmental stress. Consistent with DA, both differences in centroid size and shape between breeds were statistically significant. No differences between males and females related to asymmetry were revealed. Ivesi sheep revealed the highest fluctuating asymmetry. Geometric morphometric methods proved to be a useful tool for distinguishing differences in the shape of the skull of different sheep breeds and also can be useful for taxonomic purposes.

Paedomorphosis and retention of juvenile diet lead speciation in a group of Neotropical snakes (Colubroides-Philodryadini).

Dipsadidae is one of the largest clades of extant reptiles, showing an impressive morphological and ecological diversity. Despite this fact, the developmental processes behind its diversity are still largely unknown. In this study, we used 3D reconstructions based on micro-CT data and geometric morphometrics to evaluate the skull morphology of Philodryas agassizii, a small, surface-dwelling dipsadid that consume spiders. Adult individuals of P. agassizii exhibit a cranial morphology frequently observed in juveniles of other surface-dwelling colubroideans, represented in our analysis by its close relative Philodryas patagoniensis. Large orbits, gibbous neurocranial roof and a relatively short jaw complex are features present in juveniles of the latter species. Furthermore, we performed an extensive survey about diet of P. patagoniensis in which we detected an ontogenetic dietary shift, indicating that arthropods are more frequently consumed by juveniles of this dietary generalist. Thus, we infer that P. agassizzii retained not only the ancestral juvenile skull morphology but also dietary preferences. This study reveals that morphological changes driven by heterochronic changes, specifically paedomorphosis, influenced the retention of ancestral life history traits in P. agassizii, and therefore promoted cladogenesis. In this way, we obtained first evidence that heterochronic processes lead speciation in the snake megadiverse clade Dipsadidae.

Using your head - cranial steering in pterosaurs.

The vast majority of pterosaurs are characterized by relatively large, elongate heads that are often adorned with large, elaborate crests. Projecting out in front of the body, these large heads and any crests must have had an aerodynamic effect. The working hypothesis of the present study is that these oversized heads were used to control the left-right motions of the body during flight. Using digital models of eight non-pterodactyloids ("rhamphorhyncoids") and ten pterodactyloids, the turning moments associated with the head + neck show a close and consistent correspondence with the rotational inertia of the whole body about a vertical axis in both groups, supporting the idea of a functional relationship. Turning moments come from calculating the lateral area of the head (plus any crests) and determining the associated lift (aerodynamic force) as a function of flight speed, with flight speeds being based on body mass. Rotational inertias were calculated from the three-dimensional mass distribution of the axial body, the limbs, and the flight membranes. The close correlation between turning moment and rotational inertia was used to revise the life restorations of two pterosaurs and to infer relatively lower flight speeds in another two.

Ontogenetic changes in jaw leverage and skull shape in tufted and untufted capuchins.

The ontogeny of feeding is characterized by shifting functional demands concurrent with changes in craniofacial anatomy; relationships between these factors will look different in primates with disparate feeding behaviors during development. This study examines the ontogeny of skull morphology and jaw leverage in tufted (Sapajus) and untufted (Cebus) capuchin monkeys. Unlike Cebus, Sapajus have a mechanically challenging diet and behavioral observations of juvenile Sapajus suggest these foods are exploited early in development. Landmarks were placed on three-dimensional surface models of an ontogenetic series of Sapajus and Cebus skulls (n = 53) and used to generate shape data and jaw-leverage estimates across the tooth row for three jaw-closing muscles (temporalis, masseter, medial pterygoid) as well as a weighted combined estimate. Using geometric morphometric methods, we found that skull shape diverges early and shape is significantly different between Sapajus and Cebus throughout ontogeny. Additionally, jaw leverage varies with age and position on the tooth row and is greater in Sapajus compared to Cebus when calculated at the permanent dentition. We used two-block partial least squares analyses to identify covariance between skull shape and each of our jaw muscle leverage estimates. Sapajus, but not Cebus, has significant covariance between all leverage estimates at the anterior dentition. Our findings show that Sapajus and Cebus exhibit distinct craniofacial morphologies early in ontogeny and strong covariance between leverage estimates and craniofacial shape in Sapajus. These results are consistent with prior behavioral and comparative work suggesting these differences are a function of selection for exploiting mechanically challenging foods in Sapajus, and further emphasize that these differences appear quite early in ontogeny. This research builds on prior work that has highlighted the importance of understanding ontogeny for interpreting adult morphology.

Two surgical instruments.

The only instruments for opening the cranium considered in this chapter are drills, and in some cases facilitated with a special chisel called a lenticular. There were two kinds of trepan. The modiolus was the Latin name for a crown trepan which had a circular base with teeth which sawed a hole. Then there were the non-penetrating trepans which had a bit shaped to prevent unwanted penetration. They made small openings which could be joined by chisels to remove altogether larger areas of bone than were accessible to modioli. They were the favored instrument from the ancient world up to the Renaissance. At the beginning of the Renaissance, there was a move toward greater use of crown trepans and various methods were applied to stop them sinking too far inward. These included wings in the outer wall and changing the shape of the bit from cylindrical to conic. In time preferences returned to the cylindrical shape and larger diameters. There was also two instruments called lenticulars, the illustrations of which have been confused in the literature. It is now clear that the Roman instrument was shaped to cut the cranium and minimize the need for trepanation. The Renaissance instrument had a different shape and was used to smooth rough bone edges and excise spicules penetrating the meninges. They were simply two different instruments to which the same name was applied.

The Establishment of Calvarial Suture-Bony Composite Defects in Rats: A Standardized Model for Suture-Regenerative Therapy Investigation.

Large-scale calvarial defects often coincide with cranial suture disruption, leading to impairments in calvarial defect restoration and skull development (the latter occurs in the developing cranium). However, the lack of a standardized model hinders progress in investigating suture-regenerative therapies and poses challenges for conducting comparative analyses across distinct studies. To address this issue, the current protocol describes the detailed modeling process of calvarial suture-bony composite defects in rats. The model was generated by drilling full-thickness rectangular holes measuring 4.5 mm × 2 mm across the coronal sutures. The rats were euthanized, and the cranium samples were harvested postoperatively at day 0, week 2, week 6, and week 12. µCT results from samples collected immediately post-surgery confirmed the successful establishment of the suture-bony composite defect, involving the removal of the coronal suture and the adjacent bone tissues. Data from the 6th and 12th postoperative weeks demonstrated a natural healing tendency for the defect to close. Histological staining further validated this trend by showing increased mineralized fibers and new bone at the defect center. These findings indicate progressive suture fusion over time following calvarial defects, underscoring the significance of therapeutic interventions for suture regeneration. We anticipate that this protocol will facilitate the development of suture-regenerative therapies, offering fresh insights into the functional restoration of calvarial defects and reducing adverse outcomes associated with suture loss.

[Topographic study of the parietal region for the elaboration of revascularized cranium vault autograft]. / Izuchenie topografo-anatomicheskikh osobennostei temennoi oblasti pri razrabotke revaskulyariziruemogo kostno-fastsial'nogo temennogo autotransplantata.

OBJECTIVE: Topographic and blood vessel architecture study of the parietal area and distal regional pool of the superficial temporal artery (STA) to assess the possibility of revascularized cranium vault bone autograft formation. MATERIAL AND METHODS: For the topographic and anatomical study, 30 non-fixed corpses (17 male and 13 female) were selected, the average age of which was 59±5 years. In the anamnesis and catamnesis, there were no indications of trauma or other pathology of the head and neck, including vascular. STA was contrasted with a non-radiocontrast dye (brilliant green) with the introduction of the dye into the STA with preliminary ligation of the frontal branch of the STA. The area of blood supply to soft tissue and bone structures was studied. The angioarchitectonics of the parietal region was studied, the feeding vessel of the studied flap was identified. RESULTS: The obtained anatomical landmarks for the collection of CPFP flap make it possible to form a flap with high accuracy and minimize the morbidity of the donor area.

A xenogeneic extracellular matrix-based 3D printing scaffold modified by ceria nanoparticles for craniomaxillofacial hard tissue regeneration via osteo-immunomodulation.

Hard tissue engineering scaffolds especially 3D printed scaffolds were considered an excellent strategy for craniomaxillofacial hard tissue regeneration, involving crania and facial bones and teeth. Porcine treated dentin matrix (pTDM) as xenogeneic extracellular matrix has the potential to promote the stem cell differentiation and mineralization as it contains plenty of bioactive factors similar with human-derived dentin tissue. However, its application might be impeded by the foreign body response induced by the damage-associated molecular patterns of pTDM, which would cause strong inflammation and hinder the regeneration. Ceria nanoparticles (CNPs) show a great promise at protecting tissue from oxidative stress and influence the macrophages polarization. Using 3D-bioprinting technology, we fabricated a xenogeneic hard tissue scaffold based on pTDM xenogeneic TDM-polycaprolactone (xTDM/PCL) and we modified the scaffolds by CNPs (xTDM/PCL/CNPs). Through series ofin vitroverification, we found xTDM/PCL/CNPs scaffolds held promise at up-regulating the expression of osteogenesis and odontogenesis related genes including collagen type 1, Runt-related transcription factor 2 (RUNX2), bone morphogenetic protein-2, osteoprotegerin, alkaline phosphatase (ALP) and DMP1 and inducing macrophages to polarize to M2 phenotype. Regeneration of bone tissues was further evaluated in rats by conducting the models of mandibular and skull bone defects. Thein vivoevaluation showed that xTDM/PCL/CNPs scaffolds could promote the bone tissue regeneration by up-regulating the expression of osteogenic genes involving ALP, RUNX2 and bone sialoprotein 2 and macrophage polarization into M2. Regeneration of teeth evaluated on beagles demonstrated that xTDM/PCL/CNPs scaffolds expedited the calcification inside the scaffolds and helped form periodontal ligament-like tissues surrounding the scaffolds.