Heterogeneous Photocatalytic Degradation of Selected Pharmaceuticals and Personal Care Products (PPCPs) Using Tungsten Doped TiO2: Effect of the Tungsten Precursors and Solvents.

Pharmaceuticals and personal care products (PPCPs) which include antibiotics such as tetracycline (TC) and ciprofloxacin (CIP), etc., have attracted increasing attention worldwide due to their potential threat to the aquatic environment and human health. In this work, a facile sol-gel method was developed to prepare tungsten-doped TiO2 with tunable W5+/W6+ ratio for the removal of PPCPs. The influence of solvents in the synthesis of the three different tungsten precursors doped TiO2 is also taken into account. WCl6, ammonium metatungstate (AMT), and Na2WO4●2H2O not only acted as the tungsten precursors but also controlled the tungsten ratio. The photocatalyst prepared by WCl6 as the tungsten precursor and ethanol as the solvent showed the highest photodegradation performance for ciprofloxacin (CIP) and tetracycline (TC), and the photodegradation performance for tetracycline (TC) was 2.3, 2.8, and 7.8 times that of AMT, Na2WO4●2H2O as the tungsten precursors and pristine TiO2, respectively. These results were attributed to the influence of the tungsten precursors and solvents on the W5+/W6+ ratio, sample crystallinity and surface properties. This study provides an effective method for the design of tungsten-doped TiO2 with tunable W5+/W6+ ratio, which has a profound impact on future studies in the field of photocatalytic degradation of PPCPs using an environmentally friendly approach.

Facile construction of efficient WO3/V2O5 coupled g-C3N4 ternary composite photocatalyst for environmental emergent aqueous pollutant degradation: Stability, degradation reaction pathway and effect of pH evaluation.

Currently, one of the primary challenges that human society must overcome is the task of decreasing the amount of energy used and the adverse effects that it has on the environment. The daily increase in liquid waste (comprising organic pollutants) is a direct result of the creation and expansion of new companies, causing significant environmental disruption. Water contamination is attributed to several industries such as textile, chemical, poultry, dairy, and pharmaceutical. In this study, we present the successful degradation of methylene blue dye using g-C3N4 (GCN) mixed with WO3 and V2O5 composites (GCN/WO3/V2O5 ternary composite) as a photocatalyst, prepared by a simple mechanochemistry method. The GCN/WO3/V2O5 ternary composite revealed a notable enhancement in photocatalytic performance, achieving around 97% degradation of aqueous methylene blue (MB). This performance surpasses that of the individual photocatalysts, namely pure GCN, GCN/WO3, and GCN/V2O5 composites. Furthermore, the GCN/WO3/V2O5 ternary composite exhibited exceptional stability even after undergoing five consecutive cycles. The exceptional photocatalytic activity of the GCN/WO3/V2O5 ternary composite can be ascribed to the synergistic effect of metal-free GCN and metal oxides, resulting in the alteration of the band gap and suppression of charge recombination in the ternary photocatalyst. This study offers a better platform for understanding the characteristics of materials and their photocatalytic performance under visible light conditions.

Neuromorphic learning and recognition in WO3-xthin film-based forming-free flexible electronic synapses.

In pursuing advanced neuromorphic applications, this study introduces the successful engineering of a flexible electronic synapse based on WO3-x, structured as W/WO3-x/Pt/Muscovite-Mica. This artificial synapse is designed to emulate crucial learning behaviors fundamental to in-memory computing. We systematically explore synaptic plasticity dynamics by implementing pulse measurements capturing potentiation and depression traits akin to biological synapses under flat and different bending conditions, thereby highlighting its potential suitability for flexible electronic applications. The findings demonstrate that the memristor accurately replicates essential properties of biological synapses, including short-term plasticity (STP), long-term plasticity (LTP), and the intriguing transition from STP to LTP. Furthermore, other variables are investigated, such as paired-pulse facilitation, spike rate-dependent plasticity, spike time-dependent plasticity, pulse duration-dependent plasticity, and pulse amplitude-dependent plasticity. Utilizing data from flat and differently bent synapses, neural network simulations for pattern recognition tasks using the Modified National Institute of Standards and Technology dataset reveal a high recognition accuracy of ∼95% with a fast learning speed that requires only 15 epochs to reach saturation.

Defect-Engineered WO3-x Architectures Coupled with Random Forest Algorithm Enables Real-Time Seafood Quality Assessment.

Reliable and real-time monitoring of seafood decay is attracting growing interest for food safety and human health, while it is still a great challenge to accurately identify the released triethylamine (TEA) from the complex volatilome. Herein, defect-engineered WO3-x architectures are presented to design advanced TEA sensors for seafood quality assessment. Benefiting from abundant oxygen vacancies, the obtained WO2.91 sensor exhibits remarkable TEA-sensing performance in terms of higher response (1.9 times), faster response time (2.1 times), lower detection limit (3.2 times), and higher TEA/NH3 selectivity (2.8 times) compared with the air-annealed WO2.96 sensor. Furthermore, the definite WO2.91 sensor demonstrates long-term stability and anti-interference in complex gases, enabling the accurate recognition of TEA during halibut decay (0-48 h). Coupled with the random forest algorithm with 70 estimators, the WO2.91 sensor enables accurate prediction of halibut storage with an accuracy of 95%. This work not only provides deep insights into improving gas-sensing performance by defect engineering but also offers a rational solution for reliably assessing seafood quality.

Nitrogen Vacancy Modulation of Tungsten Nitride Peroxidase-Mimetic Activity for Bacterial Infection Therapy.

Bacterial infections claim millions of lives every year, with the escalating menace of microbial antibiotic resistance compounding this global crisis. Nanozymes, poised as prospective substitutes for antibiotics, present a significant frontier in antibacterial therapy, yet their precise enzymatic origins remain elusive. With the continuous development of nanozymes, the applications of elemental N-modulated nanozymes have spanned multiple fields, including sensing and detection, infection therapy, cancer treatment, and pollutant degradation. The introduction of nitrogen into nanozymes not only broadens their application range but also holds significant importance for the design of catalysts in biomedical research. The synergistic interplay between W and N induces pivotal alterations in electronic configurations, endowing tungsten nitride (WN) with a peroxidase-like functionality. Furthermore, the introduction of N vacancies augments the nanozyme activity, thus amplifying the catalytic potential of WN nanostructures. Rigorous theoretical modeling and empirical validation corroborate the genesis of the enzyme activity. The meticulously engineered WN nanoflower architecture exhibits an exceptional ability in traversing bacterial surfaces, exerting potent bactericidal effects through direct physical interactions. Additionally, the topological intricacies of these nanostructures facilitate precise targeting of generated radicals on bacterial surfaces, culminating in exceptional bactericidal efficacy against both Gram-negative and Gram-positive bacterial strains along with notable inhibition of bacterial biofilm formation. Importantly, assessments using a skin infection model underscore the proficiency of WN nanoflowers in effectively clearing bacterial infections and fostering wound healing. This pioneering research illuminates the realm of pseudoenzyme activity and bacterial capture-killing strategies, promising a fertile ground for the development of innovative, high-performance artificial peroxidases.

Development of tungsten trioxide nano-flakes intercalated on tannic acid-functionalized reduced graphene oxide for flexible acebutolol sensors.

Acebutolol (ACE) is commonly used to treat hypertension and high blood pressure. Large doses of ACE can have adverse effects with potentially life-threatening consequences. It is, therefore, essential to develop a simple, low-cost, reliable, and reproducible device for detecting ACE in biofluids. This study explores the potential of unique two-dimensional nano-flakes, such as tungsten trioxide (WO3). Graphene oxide (GO) typically exhibits lower electrical conductivity than pristine graphene due to the presence of oxygen-containing functional groups that interfere with the π-conjugated structure. Functionalizing GO with tannic acid (TA) can partially reinstate the π-conjugation and limit the amount of oxygen, resulting in enhanced electrical conductivity. Ultrasonic techniques were utilized to create WO3 NFs@TA-rGO, and a range of spectroscopic and microscopic methods were applied to examine the formation of the resulting WO3 NFs@TA-rGO nanocomposites. Under optimal conditions, modified sensors resulted in lower limits of detection (0.0055 µM) and good sensitivity (0.40 µA µM-1 cm-2). They also exhibited a broad linear range spanning from 0.009 to 568.6 µM. Fabricated sensors have significant anti-interference properties with high specificity and excellent storage stability (RSD = 4.3 %), reproducibility (RSD = 3.9 %), and repeatability (RSD = 3.3 %). Ultimately, the sensor's efficacy was confirmed through the successful detection of ACE in biological samples (with recoveries ranging from 99.1 to 99.6 %). Lastly, this study highlights the substantial potential of ACE detection and extends its applications in biomedical diagnostics and pharmaceutical research.

Development of tungsten-modified iron oxides to decompose an over-the-counter painkiller, Acetaminophen by activating peroxymonosulfate.

Acetaminophen (APAP) is a well-known type of over-the-counter painkillers and is frequently found in surface waterbodies, causing hepatotoxicity and skin irritation. Due to its persistence and chronic effects on the environment, innovative solutions must be provided to decompose APAP, effectively. Innovative catalysts of tungsten-modified iron oxides (TF) were successfully developed via a combustion method and thoroughly characterized using SEM, TEM, XRD, XPS, a porosimetry analysis, Mössbauer spectroscopy, VSM magnetometry, and EPR. With the synthesis method, tungsten was successfully incorporated into iron oxides to form ferrites and other magnetic iron oxides with a high porosity of 19.7 % and a large surface area of 29.5 m2/g. Also, their catalytic activities for APAP degradation by activating peroxymonosulfate (PMS) were evaluated under various conditions. Under optimal conditions, TF 2.0 showed the highest APAP degradation of 95 % removal with a catalyst loading of 2.0 g/L, initial APAP concentration of 5 mg/L, PMS of 6.5 mM, and pH 2.15 at room temperature. No inhibition by solution pHs, alkalinity, and humic acid was observed for APAP degradation in this study. The catalysts also showed chemical and mechanical stability, achieving 100 % degradation of 1 mg/L APAP during reusability tests with three consecutive experiments. These results show that TFs can effectively degrade persistent contaminants of emerging concern in water, offering an impactful contribution to wastewater treatment to protect human health and the ecosystem.

WSe2/chitosan-based wearable multi-functional platform for monitoring electrophysiological signals, pulse rate, respiratory rate, and body movements.

A cleanroom free optimized fabrication of a low-cost facile tungsten diselenide (WSe2) combined with chitosan-based hydrogel device is reported for multifunctional applications including tactile sensing, pulse rate monitoring, respiratory rate monitoring, human body movements detection, and human electrophysiological signal detection. Chitosan being a natural biodegradable, non-toxic compound serves as a substrate to the semiconducting WSe2 electrode which is synthesized using a single step hydrothermal technique. Elaborate characterization studies are performed to confirm the morphological, structural, and electrical properties of the fabricated chitosan/WSe2 device. Chitosan/WSe2 sensor with copper contacts on each side is put directly on skin to capture human body motions. The resistivity of the sample was calculated as 26 kΩ m-1. The device behaves as an ultrasensitive pressure sensor for tactile and arterial pulse sensing with response time of 0.9 s and sensitivity of around 0.02 kPa-1. It is also capable for strain sensing with a gauge factor of 54 which is significantly higher than similar other reported electrodes. The human body movements sensing can be attributed to the piezoresistive character of WSe2 that originates from its non-centrosymmetric structure. Further, the sensor is employed for monitoring respiratory rate which measures to 13 counts/min for healthy individual and electrophysiological signals like ECG and EOG which can be used later for detecting numerous pathological conditions in humans. Electrophysiological signal sensing is carried out using a bio-signal amplifier (Bio-Amp EXG Pill) connected to Arduino. The skin-friendly, low toxic WSe2/chitosan dry electrodes pave the way for replacing wet electrodes and find numerous applications in personalized healthcare.

Enhancing environmental sustainability: Butea monosperma leaves as a key component in WO3-based composites for water purification and therapeutic applications.

In this research, a novel nano-biocomposite material, namely, tungsten trioxide-Butea monosperma leaf powder (WO3@BLP), is an effective and eco-friendly adsorbent used for the mitigation of congo red (CR) and crystal violet (CV) dyes from its aqueous phase. The as-prepared WO3@BLP was characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), DLS analysis, and TGA. Many factors such as solution pH, WO3@BLP dose, temperature, contact time, and initial CR/CV dye concentrations were exploited to monitor the adsorption efficiency of WO3@BLP composites. The biosorption of both CR and CV dyes followed the Langmuir isotherm, with maximum adsorption capacities (qmax) reaching 84.91 mg g-1 for CR at pH 2.3 and 162.75 mg g-1 for CV at pH 8, fitting of kinetics data to the PSO model with closed values of qeexp (mg g-1) and qecal (mg g-1), i.e., 25.69 to 25.38 mg g-1 for CR dye and 29.06 to 29.08 mg g-1 for CV dye. The interaction mechanism behind the adsorption of CR and CV dyes onto the WO3@BLP bionanocomposite includes electrostatic interaction and surface complexation. The synthesized materials were tested for antifungal activity against three different Candida cells, i.e., C. albicans ATCC 90028, C. glabrata ATCC 90030, and C. tropicalis ATCC 750, by using broth dilution method on the minimum inhibiting concentration (MIC). Furthermore, the cytotoxicity of nano-formulated WO3@BLP was studied by in vitro hemolytic assay on a human host. Overall, this research presents a pioneering nano-biocomposite, WO3@BLP, as a sustainable adsorbent for CR and CV dye removal, adhering to Langmuir isotherm and pseudo-second-order kinetics. Its multifaceted approach includes elucidating interaction mechanisms, demonstrating antifungal activity, and assessing cytotoxicity, marking a significant advancement in environmental remediation.

Oxygen Vacancy Enabled Electronic Structure Engineering of Pt-WO3 Nanosheets toward Highly Efficient BTEX Sensing.

A Pt nanoparticle-immobilized WO3 material is a promising candidate for catalytic reactions, and the surface and electronic structure can strongly affect the performance. However, the effect of the intrinsic oxygen vacancy of WO3 on the d-band structure of Pt and the synergistic effect of Pt and the WO3 matrix on reaction performance are still ambiguous, which greatly hinders the design of advanced materials. Herein, Pt-decorated WO3 nanosheets with different electronic metal-support interactions are successfully prepared by finely tuning the oxygen vacancy structure of WO3 nanosheets. Notably, Pt-modified WO3 nanosheets annealed at 400 °C exhibit excellent benzene series (BTEX) sensing performance (S = 377.33, 365.21, 348.45, and 319.23 for 50 ppm ethylbenzene, benzene, toluene, and xylene, respectively, at 140 °C), fast response and recovery dynamics (10/7 s), excellent reliability (σ = 0.14), and sensing stability (φ = 0.08%). Detailed structural characterization and DFT results reveal that interfacial Ptδ+-Ov-W5+ sites are recognized as the active sites, and the oxygen vacancies of the WO3 matrix can significantly affect the d-band structure of Pt nanoparticles. Notably, Pt/WO3-400 with improved surface oxygen mobility and medium electronic metal-support interaction facilitates the activation and desorption of BTEX, which contributes to the highly efficient BTEX sensing performance. Our work provides a new insight for the design of high-performance surface reaction materials for advanced applications.

Disposal of spent V2O5-WO3/TiO2 catalysts: A regeneration principle based on structure-activity relationships from carrier transformations.

Characterization and evaluation of hazardous spent V2O5-WO3/TiO2 catalysts are critical to determining their treatment or final disposal. This study employs a thermal approach to simulate the preparation of spent catalysts derived from commercial V2O5-WO3/TiO2 catalysts and investigate the structure-activity relationship of the carrier changes during the deactivation process. The results indicate that the catalyst carrier undergoes two processes: an increase in grain size and a transformation in crystal structure. Both structural and catalytic investigations demonstrate that the grain size for catalyst deactivation is 24.62 nm, and the formation of CaWO4 occurs before the crystalline transformation. The specific surface area is susceptible to an increase in grain size. The reactions of selective catalytic reduction involve the participation of both Brønsted acid and Lewis acid sites. The deactivation process of the carrier initially affects Brønsted acid sites, followed by a reduction in Lewis acid sites, resulting in a decline in NH3 adsorption capacity and oxidation. Correlation analysis reveals that changes in the physicochemical properties of the catalyst reduce the NO conversion, with the order being The grain size > Total acid amount > The surface area. It is recommended to recycle the spent catalyst if the carrier grain size is less than 25 nm. The findings of this investigation contribute to expanding the database for evaluating and understanding the physicochemical properties of spent catalysts for disposal.

Visible light-induced photocatalytic degradation of tetrabromobisphenol A on platinized tungsten oxide.

In this study, we investigated the degradation of the flame retardant tetrabromobisphenol A (TBBPA) using platinized tungsten oxide (Pt/WO3), synthesized via a simple photodeposition method, under visible light. The results of degradation experiments show a significant enhancement in TBBPA degradation upon surface platinization of WO3, with the degradation rate increasing by 13.4 times compared to bare WO3. The presence of Pt on the WO3 surface stores conduction band electrons, which facilitates the two-electron reduction of oxygen and enhances the production of valence band holes (hVB+) and hydroxyl radicals (●OH). Both hVB+ and ●OH are significantly involved in the degradation of TBBPA in the visible light-irradiated Pt/WO3 system. This was verified through fluorescence spectroscopy employing coumarin as a chemical probe and oxidizing species-quenching experiments. The analysis of degradation products and their toxicity assessment demonstrate that the toxicity of TBBPA-contaminated water is significantly reduced after Pt/WO3 photocatalysis. The degradation rate of TBBPA increased with increasing Pt/WO3 dosage, reached an optimum at a Pt content of 0.5 wt%, but decreased with increasing TBBPA concentration. The decrease in degradation efficiency of Pt/WO3 was minor, both in the presence of various anions and after repeated use. This study proposes that Pt/WO3 is a viable photocatalyst for the degradation of TBBPA in water under visible light.

FePO4/WB as an efficient heterogeneous Fenton-like catalyst for rapid removal of neonicotinoid insecticides: ROS quantification, mechanistic insights and degradation pathways.

Iron-based catalysts for peroxymonosulfate (PMS) activation hold considerable potential in water treatment. However, the slow conversion of Fe(III) to Fe(II) restricts its large-scale application. Herein, an iron phosphate tungsten boride composite (FePO4/WB) was synthesized by a simple hydrothermal method to facilitate the Fe(III)/Fe(II) redox cycle and realize the efficient degradation of neonicotinoid insecticides (NEOs). Based on electron paramagnetic resonance (EPR) characterization, scavenging experiments, chemical probe approaches, and quantitative tests, both radicals (HO• and SO4⋅-) and non-radicals (1O2 and Fe(IV)) were produced in the FePO4/WB-PMS system, with relative contributions of 3.02 %, 3.58 %, 6.24 %, and 87.16 % to the degradation of imidacloprid (IMI), respectively. Mechanistic studies revealed that tungsten boride (WB) promoted the reduction of FePO4, and the generated Fe(II) dominantly activated PMS through a two-electron transfer to form Fe(IV), while a minority of Fe(II) engaged in a one-electron transfer with PMS to produce SO4⋅-, HO•, and 1O2. In addition, four degradation pathways of NEOs were proposed by analyzing the byproducts using UPLC-Q-TOF-MS/MS. Besides, seed germination experiments revealed the biotoxicity of NEOs was significantly reduced after degradation via the FePO4/WB-PMS system. Meanwhile, the recycling experiments and continuous flow reactor experiments showed that FePO4/WB exhibited high stability. Overall, this study provided a new perspective on water remediation by Fenton-like reaction. ENVIRONMENTAL IMPLICATION: Neonicotinoids (NEOs) are a type of insecticide used widely around the world. They've been found in many aquatic environments, raising concerns about their possible negative effects on the environment and health. Iron-based catalysts for peroxymonosulfate (PMS) activation hold great promise for water purification. However, the slow conversion of Fe(III) to Fe(II) restricts its large-scale application. Herein, iron phosphate tungsten boride composite (FePO4/WB) was synthesized by a simple hydrothermal method to facilitate the Fe(III)/Fe(II) redox cycle and realize the efficient degradation of NEOs. The excellent stability and reusability provided a great prospect for water remediation.

Synthesis and photodegradation performance of a heterostructure ferromagnetic photocatalyst based on MWCNTs functionalized with (3-glycidyloxypropyl)trimethoxysilane and decorated with tungsten trioxide for metronidazole and acetaminophen degradation in aqueous environments.

The presence of metronidazole (MNZ) and acetaminophen (ACE) in aquatic environments has raised growing concerns regarding their potential impact on human health. Incorporating various patterns into a photocatalytic material is considered a critical approach to achieving enhanced photocatalytic efficiency in the photocatalysis process. In this study, WO3 nanoparticles, which were immobilized onto ferromagnetic multi-walled carbon nanotubes that were functionalized using (3-glycidyloxypropyl)trimethoxysilane (FMMWCNTs@GLYMO@WO3), exhibited remarkable efficiency in removing MNZ and ACE (93% and 97%) in only 15 min. In addition, the new visible-light FMMWCNTs@GLYMO@WO3 nanoparticles as a magnetically separable photocatalyst were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), EDS-mapping, vibrating sample magnetometry (VSM), thermogravimetric analysis (TGA), diffuse reflectance spectroscopy (DRS), high-performance liquid chromatography (HPLC), and total organic carbon (TOC) due to detailed studies (morphological, structural, magnetic and optical properties) of the photocatalyst. In-depth spectroscopic and microscopic characterization of the newly developed ferromagnetic FMMWCNTs@GLYMO@WO3 (III) photocatalyst revealed a spherical morphology, with nanoparticle diameters averaging between 23 and 39 nm. Compared to conventional multiwall carbon nanotube and WO3 photocatalysts, FMMWCNTs@GLYMO@WO3 (III) demonstrated superior photocatalytic activity. Remarkably, it exhibited excellent reusability, maintaining its efficiency over a minimum of five cycles in the degradation of metronidazole (MNZ) and acetaminophen (ACE).

Unraveling the synergism mechanistic insight of O-vacancy and interfacial charge transfer in WO3-x decorated on Ag2CO3/BiOBr for photocatalysis of water pollutants: Based on experimental and density functional theory (DFT) studies.

Photocatalysis has been widely used as one of the most promising approaches to remove various pollutants in liquid or gas phases during the last decade. The main emphasis of the study is on the synergy of vacancy engineering and heterojunction formation, two widely used modifying approaches, to significantly alter photocatalytic performance. The vacancy-induced Ag2CO3/BiOBr/WO3-x heterojunction system has been fabricated using a co-precipitation technique to efficiently abate methylene blue (MB) dye and doxycycline (DC) antibiotic. The as-fabricated Ag2CO3/BiOBr/WO3-x heterojunction system displayed improved optoelectronic characteristic features because of the rational combination of dual charge transferal route and defect modulation. The Ag2CO3/BiOBr/WO3-x system possessed 97% and 74% photodegradation efficacy for MB and DC, respectively, with better charge isolation and migration efficacy. The ternary photocatalyst possessed a multi-fold increase in the reaction rate for both MB and DC, i.e., 0.021 and 0.0078 min-1, respectively, compared to pristine counterparts. Additionally, more insightful deductions about the photodegradation routes were made possible by the structural investigations of MB and DC using density functional theory (DFT) simulations. This study advances the understanding of the mechanisms forming visible light active dual Z-scheme heterojunction for effective environmental remediation.

Preparation of W-N-C single atom catalyst and Cu3(HHTP)2 metal-organic framework dual-decorated graphene nanoplatelet flexible electrode arrays for the rapid detection of carbendazim in vegetables.

It is highly desirable to develop a low-cost and rapid detection method for trace levels of carbendazim fungicide residues, which would be beneficial for improving human health and mitigating environmental issues. Herein, isolated single tungsten atoms were implanted onto well-organized metal-organic framework (MOF)-derived N-doped carbons to form W-N-C single-site heterojunctions with ultrahigh electrocatalytic activity. The coupling of W-N-C with Cu3(HHTP)2, an electronically conductive MOF with a large surface area and porous structure, exhibited enhanced electrocatalytic performance for the oxidation of carbendazim (CBZ) when they were used for decorating graphene nanoplatelet flexible electrode arrays fabricated via template-assisted scalable filtration. A wide linear range (3.0 nM-50 µM) with an ultra-low detection limit of 0.97 nM and fast response was achieved for CBZ analysis. Moreover, the sensing platform has been utilised to monitor CBZ levels in vegetable samples with satisfactory recovery rates of 97.2-102% and a low relative standard deviation of 1.9%.

Operando Investigation of WS2 Gas Sensors: Simultaneous Ambient Pressure X-ray Photoelectron Spectroscopy and Electrical Characterization in Unveiling Sensing Mechanisms during Toxic Gas Exposure.

Ambient pressure X-ray photoelectron spectroscopy (APXPS) is combined with simultaneous electrical measurements and supported by density functional theory calculations to investigate the sensing mechanism of tungsten disulfide (WS2)-based gas sensors in an operando dynamic experiment. This approach allows for the direct correlation between changes in the surface potential and the resistivity of the WS2 sensing active layer under realistic operating conditions. Focusing on the toxic gases NO2 and NH3, we concurrently demonstrate the distinct chemical interactions between oxidizing or reducing agents and the WS2 active layer and their effect on the sensor response. The experimental setup mimics standard electrical measurements on chemiresistors, exposing the sample to dry air and introducing the target gas analyte at different concentrations. This methodology applied to NH3 concentrations of 100, 230, and 760 and 14 ppm of NO2 establishes a benchmark for future APXPS studies on sensing devices, providing fast acquisition times and a 1:1 correlation between electrical response and spectroscopy data in operando conditions. Our findings contribute to a deeper understanding of the sensing mechanism in 2D transition metal dichalcogenides, paving the way for optimizing chemiresistor sensors for various industrial applications and wireless platforms with low energy consumption.

Investigating the synergetic effect of tungsten oxide doping into the 1,3-dicarbonyl moiety grafted chitosan and phytic acid impregnated sodium alginate for efficient U(VI) adsorption.

In this work, chemical modification of the chitosan with ethyl acetoacetate was performed through a base-catalyzed reaction in which epichlorohydrin facilitated the insertion as well as nucleophilic substitution reaction to graft the 1,3-dioxo moiety across the linear chains of the base biopolymer to establish specificity and selectivity for U(VI) removal. The modified chitosan (EAA-CS) was intercalated into phosphate rich alginate matrix (PASA). Later on, the WO3-doped composites with different WO3 to PASA mass ratio were prepared and characterized using FTIR, XPS, SEM-EDS, XRD, and elemental mapping analysis. WO3 significantly contributed to chemically stable inorganic-organic composites with improved porous texture. Among the prepared composites, MCPS-3 microspherical beads, having mass ratio of 30.0 % w/w, exhibited excellent sorption capacity for U(VI) at an optimal pH 4.5. The successful U(VI) sorption was validated by the existence of two U4f peaks at 392.25 and 381.36 eV due to U4f5/2 and U4f7/2 sub-peaks with an intensity ratio of 3:4, respectively. Batch mode sorption kinetics followed pseudo-second-order rate equation (R2 ≈ 0.99, qe,th ≈ 116.88 mg/g, k2 = 0.86 × 10-4 g/mg.min-1) and equilibrium sorption data aligns with Langmuir (R2 = 0.99, qm = 343.85 mg/g at 310 K and pH = 4.5, KL = 2.00 × 10-2 L/mg) and Temkin models (R2 ≈ 0.99). Thermodynamic parameters ΔHo (30.51 kJ/mol), ΔSo (0.19 kJ/mol.K) and ΔGo (-25.64, -26.89, and - 27.91 kJ/mol) at 298, 305, and 310 K, respectively, suggested that the uptake process is feasible, endothermic and spontaneous. Based on these findings, it is reasonable to conclude that MCPS-3 could be a better hydrogel-based biomaterial for appreciable uranium recovery.

Simultaneous immunodetection of multiple cervical cancer biomarkers based on a signal-amplifying redox probes/polyethyleneimine-coated gold nanoparticles/2D tungsten disulfide/graphene oxide nanocomposite platform.

To advance cervical cancer diagnostics, we propose a state-of-the-art label-free electrochemical immunosensor designed for the simultaneous detection of multiple biomarker proteins (p16INK4a, p53, and Ki67). This immunosensor is constructed using a polyethyleneimine-coated gold nanoparticles/2D tungsten disulfide/graphene oxide (PEI-AuNPs/2D WS2/GO) composite-modified three-screen-printed carbon electrode (3SPCE) array. The 2D WS2/GO hybrid provides a large specific surface area for supporting well-dispersed PEI-AuNPs and adsorbed redox-active species, enhancing overall performance. The PEI-AuNPs-decorated 2D WS2/GO composite not only improves electrode conductivity but also increases the antibody loading capacity. Redox-active species, including Cd2+ ions, 2,3-diaminophenazine (DAP), and methylene blue (MB), serve as distinct signaling compounds to quantitatively detect the cervical cancer biomarkers p16INK4a, p53, and Ki67, respectively. Additionally, the immunosensor demonstrates the detection with high sensitivity, good storage stability, high selectivity, and acceptable reproducibility. This immunosensor demonstrates a good linear relationship with the logarithm of protein concentrations. Additionally, the immunosensor also demonstrates high sensitivity, good storage stability, high selectivity, and acceptable reproducibility. Our promising results and the successful application of the immunosensor in detecting three tumor markers in human serum highlight its potential for clinical diagnosis of cervical cancer.

Advancing nanoarchitectures of 2D WO3/MXene photoanode for enhanced photoelectrocatalytic oxidation of phenol and arsenic in synthetic wastewater.

The photoelectrocatalytic advanced oxidation process (PEAOP) necessitates high-performing and stable photoanodes for the effective oxidation of complex pollutants in industrial wastewater. This study presents the construction of 2D WO3/MXene heteronanostructures for the development of efficient and stable photoanode. The WO3/MXene heterostructure features well-ordered WO3 photoactive sites anchored on micron-sized MXene sheets, providing an increased visible light active catalytic surface area and enhanced electrocatalytic activities for pollutant oxidation. Phenol, a highly toxic compound, was completely oxidized at an applied potential of 0.8 V vs. RHE under visible light irradiation. Systematic optimization of operational conditions for the photoelectrocatalytic oxidation of phenol was conducted. The phenol oxidation mechanism was elucidated via high-performance liquid chromatography (HPLC) analysis and the identification of intermediate compounds. Additionally, a mixed model of phenol and arsenic (III) in polluted water demonstrated the capability of WO3/MXene photoanode for the simultaneous oxidation of both organic and inorganic pollutants, achieving complete conversion of phenol and As(III) to non-toxic As(V). The WO3/MXene photoanode facilitated water oxidation, generating a substantial amount of O2•- and •OH oxidative species, which are crucial for the concurrent oxidation of phenol and arsenic. Recyclability tests demonstrated a 99% retention of performance, confirming the WO3/MXene photoanode's suitability for long-term operation in PEAOPs. The findings suggest that integrating WO3/MXene photoanodes into water purification systems can enhance economic feasibility, reduce energy consumption, and improve efficiency. This PEAOP offers a viable solution to the critical issue of heavy metal and organic chemical pollution in various water bodies, given its scalability and ability to preserve ecosystems while conserving clean water resources.