Nanofiber-reinforced self-healing polysaccharide-based hydrogel dressings for pH discoloration monitoring and treatment of infected wounds.

The escalating global health concern arises from chronic wounds induced by bacterial infections, posing a significant threat to individuals. Consequently, an imperative exist for the development of hydrogel dressings to facilitate prompt wound monitoring and efficacious wound management. To this end, pH-sensitive bromothymol blue (BTB) and pH-responsive drug tetracycline hydrochloride (TH) were introduced into the polysaccharide-based hydrogel to realize the integration of wound monitoring and controlled treatment. Polysaccharide-based hydrogels were formed via a Schiff base reaction by cross-linking carboxymethyl chitosan (CMCS) on an oxidized sodium alginate (OSA) skeleton. BTB was used as a pH indicator to monitor wound infection through visual color changes visually. TH could be dynamically released through the pH response of the Schiff base bond to provide effective treatment and long-term antibacterial activity for chronically infected wounds. In addition, introducing polylactic acid nanofibers (PLA) enhanced the mechanical properties of hydrogels. The multifunctional hydrogel has excellent mechanical, self-healing, injectable, antibacterial properties and biocompatibility. Furthermore, the multifaceted hydrogel dressing under consideration exhibits noteworthy capabilities in fostering the healing process of chronically infected wounds. Consequently, the research contributes novel perspectives towards the advancement of intelligent and expeditious bacterial infection monitoring and dynamic treatment platforms.

LL37 Microspheres Loaded on Activated Carbon-chitosan Hydrogel: Anti-bacterial and Anti-toxin Wound Dressing for Chronic Wound Infections.

Antimicrobial peptide LL37 is a promising antibacterial candidate due to its potent antimicrobial activity with no known bacterial resistance. However, intrinsically LL37 is susceptible to degradation in wound fluids limits its effectiveness. Bacterial toxins which are released after cell lysis are found to hinder wound healing. To address these challenges, encapsulating LL37 in microspheres (MS) and loading the MS onto activated carbon (AC)-chitosan (CS) hydrogel. This advanced wound dressing not only protects LL37 from degradation but also targets bacterial toxins, aiding in the healing of chronic wound infections. First, LL37 MS and LL37-AC-CS hydrogel were prepared and characterised in terms of physicochemical properties, drug release, and peptide-polymer compatibility. Antibacterial and antibiofilm activity, bacterial toxin elimination, cell migration, and cell cytotoxicity activities were investigated. LL37-AC-CS hydrogel was effective against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. LL37-AC-CS hydrogel bound more endotoxin than AC with CS hydrogel alone. The hydrogel also induced cell migration after 72 h and showed no cytotoxicity towards NHDF after 72 h of treatment. In conclusion, the LL37-AC-CS hydrogel was shown to be a stable, non-toxic advanced wound dressing method with enhanced antimicrobial and antitoxin activity, and it can potentially be applied to chronic wound infections to accelerate wound healing.

Effect of Ducrosia anethifolia methanol extract against methicillin resistant Staphylococcus aureus and Pseudomonas aeruginosa biofilms on excision wound in diabetic mice.

Background: Ducrosia anethifolia is an aromatic desert plant used in Saudi folk medicine to treat skin infections. It is widely found in Middle Eastern countries. Methods: A methanolic extract of the plant was prepared, and its phytoconstituents were determined using LC-MS. In-vitro and in-vivo antibacterial and antibiofilm activities of the methanolic extract were evaluated against multidrug-resistant bacteria. The cytotoxic effect was assessed using HaCaT cell lines in-vitro. Diabetic mice were used to study the in-vivo antibiofilm and wound healing activity using the excision wound method. Results: More than 50 phytoconstituents were found in the extract after LC-MS analysis. The extract exhibited antibacterial activity against both the tested pathogens. The extract was free of irritant effects on mice skin, and no cytotoxicity was observed on HaCaT cells with an IC50 value of 1381 µg/ml. The ointment formulation of the extract increased the healing of diabetic wounds. The microbial load of both pathogens in the wounded tissue was also reduced after the treatment. The extract was more effective against methicillin-resistant Staphylococcus aureus (MRSA) than MDR-P. aeruginosa in both in vitro and in vivo experiments. Further, skin regeneration was also observed in histological studies. Conclusions: The results showed that D. anethifolia methanol extract supports wound healing in infected wounds in diabetic mice through antibacterial, antibiofilm, and wound healing activities.

Stingless bee honey: Nutritional, physicochemical, phytochemical and antibacterial validation properties against wound bacterial isolates.

With the rise of AMR the management of wound infections are becoming a big challenge. This has been attributed to the fact that most wound bacterial isolates have been found to possess various virulence factors like enzymes, toxins & biofilms production. Therefore, need for discovery of new lead compounds is paramount as such factors make these microbes to be resistant to already existing arsenal of antibiotics or even the immune system. This study aimed at documenting the nutritional, physicochemical, phytochemical and antibacterial properties of stingless bee honey. Isolation and characterization of bacterial isolates from 34 samples obtained from wounds of outpatients and surgical wards of Nakuru County Referral Hospital, Kenya was done. Various bacterial isolates (43) were isolated Staphylococcus aureus (34.8%) being predominant, followed by Pseudomonas aeruginosa (27.9%), Klebsiella pneumoniae (23.3%) and Escherichia coli (14.0%). A total of 36 out of the total isolates were genotypically characterized using molecular techniques detecting the prevalence of the following virulence genes; 16 srRNA (756 bp), hla (229 bp), cnf1 (426 bp), cnf2 (543 bp), hlyA (1011 bp), rmpA (461 bp), lasL (600 bp), gyrB (411 bp), khe (77 bp) and magA (128 bp). An assessment of the in vitro antibacterial activity of 26 stingless bee honey samples collected from their cerumen egg-shaped pots in Marigat sub-County, Baringo County, Kenya was done. Antibacterial properties of the stingless bee honey was done with varying susceptibility patterns being observed at different concentrations of honey impregnated discs (10x104, 20x104, 50x104 and 75x104 ml µg/ ml) giving mean inhibition diameters of 18.23 ± 0.4 mm (Staphylococcus aureus), 17.49 ± 0.3 mm (Pseudomonas aeruginosa), 16.05 ± 0.6 mm (Klebsiella pneumoniae) and 10.19 ± 0.5 mm (Escherichia coli) with a mean range of 14.54 ± 2.0 mm to 17.58 ± 3 mm. Higher susceptibility to honey was recorded across all the bacterial isolates compared to conventional antibiotics while the mean MIC and MBC of the honey were recorded at 62.5 ml µg/ ml and 250 ml µg/ ml respectively. Control bacterial isolates Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, Klebsiella pneumoniae ATCC 27736 and Pseudomonas aeruginosa ATCC 27858 were used in the analysis. The stingless bee honey was found to be rich in various nutritive components like sugar (89.85 ± 5.07 g/100 g) and moisture (81.75 ± 10.35 mg/g) with a significant difference of P <0.05 as the main antibacterial components. Additionally, the stingless honey did possess water soluble vitamins, proteins and minerals of which potassium was the most dominant one. In regard to phytochemicals, on our preliminary analysis phenolic, flavonoid and carotenoid compounds were found to be present with phenolic compounds being the most dominant one. Stingless bee honey from Marigat, has antimicrobial properties which could be attributed to the rich phytochemicals it possesses and its physicochemical properties in addition to its high nutritive value.

Assessment between antiseptic and normal saline for negative pressure wound therapy with instillation and dwell time in diabetic foot infections.

Negative pressure wound therapy with instillation and dwell time (NPWTi-d) is increasingly used for a diverse range of wounds. Meanwhile, the topical wound irrigation solution consisting of polyhexamethylene biguanide and betaine (PHMB-B) has shown efficacy in managing wound infections. However, the effectiveness of this solution as a topical instillation solution for NPWTi-d in patients with diabetic foot infections (DFIs) has not been thoroughly studied. The objective of this retrospective study was to evaluate the impact of using PHMB-B as the instillation solution during NPWTi-d on reducing bioburden and improving clinical outcomes in patients with DFIs. Between January 2017 and December 2022, a series of patients with DFIs received treatment with NPWTi-d, using either PHMB-B or normal saline as the instillation solution. Data collected retrospectively included demographic information, baseline wound characteristics, and treatment outcomes. The study included 61 patients in the PHMB-B group and 73 patients in the normal saline group, all diagnosed with DFIs. In comparison to patients treated with normal saline, patients with PHMB-B exhibited no significant differences in terms of wound bed preparation time (P = 0.5034), length of hospital stay (P = 0.6783), NPWTi-d application times (P = 0.1458), duration of systematic antimicrobial administration (P = 0.3567), or overall cost of hospitalization (P = 0.6713). The findings of the study suggest that the use of either PHMB-B or normal saline as an instillation solution in NPWTi-d for DFIs shows promise and effectiveness, yet no clinical distinction was observed between the two solutions.

The interplay of Pseudomonas aeruginosa and Staphylococcus aureus in dual-species biofilms impacts development, antibiotic resistance and virulence of biofilms in in vitro wound infection models.

Due to high tolerance to antibiotics and pronounced virulence, bacterial biofilms are considered a key factor and major clinical challenge in persistent wound infections. They are typically composed of multiple species, whose interactions determine the biofilm's structural development, functional properties and thus the progression of wound infections. However, most attempts to study bacterial biofilms in vitro solely rely on mono-species populations, since cultivating multi-species biofilms, especially for prolonged periods of time, poses significant challenges. To address this, the present study examined the influence of bacterial composition on structural biofilm development, morphology and spatial organization, as well as antibiotic tolerance and virulence on human skin cells in the context of persistent wound infections. By creating a wound-mimetic microenvironment, the successful cultivation of dual-species biofilms of two of the most prevalent wound pathogens, Pseudomonas aeruginosa and Staphylococcus aureus, was realized over a period of 72 h. Combining quantitative analysis with electron microscopy and label-free imaging enabled a comprehensive evaluation of the dynamics of biofilm formation and matrix secretion, revealing a twofold increased maturation of dual-species biofilms. Antibiotic tolerance was comparable for both mono-species cultures, however, dual-species communities showed a 50% increase in tolerance, mediated by a significantly reduced penetration of the applied antibiotic into the biofilm matrix. Further synergistic effects were observed, where dual-species biofilms exacerbated wound healing beyond the effects observed from either Pseudomonas or Staphylococcus. Consequently, predicting biofilm development, antimicrobial tolerance and virulence for multi-species biofilms based solely on the results from mono-species biofilms is unreliable. This study underscores the substantial impact of a multi-species composition on biofilm functional properties and emphasizes the need to tailor future studies reflecting the bacterial composition of the respective in vivo situation, leading to a more comprehensive understanding of microbial communities in the context of basic microbiology and the development of effective treatments.

All-in-one hydrogel patches with sprayed bFGF-loaded GelMA microspheres for infected wound healing studies.

The current wound healing process faces numerous challenges such as bacterial infection, inflammation and oxidative stress. However, wound dressings used to promote wound healing, are not well suited to meet the clinical needs. Hyaluronic acid (HA) not only has excellent water absorption and good biocompatibility but facilitates cell function and tissue regeneration. Dopamine, on the other hand, increases the overall viscosity of the hydrogel and possesses antioxidant property. Furthermore, chitosan exhibits outstanding performance in antimicrobial, anti-inflammatory and antioxidant activities. Basic fibroblast growth factor (bFGF) is conducive to cell proliferation and migration, vascular regeneration and wound healing. Hence, we designed an all-in-one hydrogel patch containing dopamine and chitosan framed by hyaluronic acid (HDC) with sprayed gelatin methacryloyl (GelMA) microspheres loaded with bFGF (HDC-bFGF). The hydrogel patch exhibits excellent adhesive, anti-inflammatory, antioxidant and antibacterial properties. In vitro experiments, the HDC-bFGF hydrogel patch not only showed significant inhibitory effect on RAW cell inflammation and Staphylococcus aureus (S. aureus) growth but also effectively scavenged free radicals, in addition to promoting the migration of 3 T3 cells. In the mice acute infected wound model, the HDC-bFGF hydrogel patch adhered to the wound surface greatly accelerated the healing process via its anti-inflammatory and antioxidant activities, bacterial inhibition and pro-vascularization effects. Therefore, the multifunctional HDC-bFGF hydrogel patch holds great promise for clinical application.

NF-κB-Signaling-Targeted Immunomodulatory Nanoparticle with Photothermal and Quorum-Sensing Inhibition Effects for Efficient Healing of Biofilm-Infected Wounds.

The development of therapeutics with high antimicrobial activity and immunomodulatory effects is urgently needed for the treatment of infected wounds due to the increasing danger posed by recalcitrant-infected wounds. In this study, we developed light-controlled antibacterial, photothermal, and immunomodulatory biomimetic N/hPDA@M nanoparticles (NPs). This nanoplatform was developed by loading flavonoid naringenin onto hollow mesoporous polydopamine NPs in a π-π-stacked configuration and encasing them with macrophage membranes. First, our N/hPDA@M NPs efficiently neutralized inflammatory factors present within the wound microenvironment by the integration of macrophage membranes. Afterward, the N/hPDA@M NPs effectively dismantled bacterial biofilms through a combination of the photothermal properties of PDA and the quorum sensing inhibitory effects of naringenin. It is worth noting that N/hPDA@M NPs near-infrared-enhanced release of naringenin exhibited specificity toward the NF-κB-signaling pathway, effectively mitigating the inflammatory response. This innovative design not only conferred remarkable antibacterial properties upon the N/hPDA@M NPs but also endowed them with the capacity to modulate inflammatory responses, curbing excessive inflammation and steering macrophage polarization toward the M2 phenotype. As a result, this multifaceted approach significantly contributes to expediting the healing process of infected skin wounds.

Polyethyleneimine surface-modified silver-selenium nanocomposites for anti-infective treatment of wounds by disrupting biofilms.

Bacterial biofilm formation is associated with the pathogenicity of pathogens and poses a serious threat to human health and clinical therapy. Complex biofilm structures provide physical barriers that inhibit antibiotic penetration and inactivate antibiotics via enzymatic breakdown. The development of biofilm-disrupting nanoparticles offers a promising strategy for combating biofilm infections. Hence, polyethyleneimine surface-modified silver-selenium nanocomposites, Ag@Se@PEI (ASP NCs), were designed for synergistic antibacterial effects by destroying bacterial biofilms to promote wound healing. The results ofin vitroantimicrobial experiments showed that, ASP NCs achieved efficient antibacterial effects againstStaphylococcus aureus (S. aureus)andEscherichia coli (E. coli)by disrupting the formation of the bacterial biofilm, stimulating the outbreak of reactive oxygen species and destroying the integrity of bacterial cell membranes. Thein-vivobacterial infection in mice model showed that, ASP NCs further promoted wound healing and new tissue formation by reducing inflammatory factors and promoting collagen fiber formation which efficiently enhanced the antibacterial effect. Overall, ASP NCs possess low toxicity and minimal side effects, coupled with biocompatibility and efficient antibacterial properties. By disrupting biofilms and bacterial cell membranes, ASP NCs reduced inflammatory responses and accelerated the healing of infected wounds. This nanocomposite-based study offers new insights into antibacterial therapeutic strategies as potential alternatives to antibiotics for wound healing.

Asymmetric chitosan-derivative/carboxymethylcellulose layer-by-layer film combining antimicrobial and vascular regeneration for the repair of infected wounds.

Bacterially infected wounds are a serious threat to patients' lives and health, and multifunctional dressings with antimicrobial properties and healing promotion are urgently needed. Thus, we used the cationic and anionic properties of chitosan (CS)-nerol (N) derivative (CSN) and carboxymethylcellulose (CMC) to prepare asymmetric layer-by-layer self-assembled (LBL) composite films (CSN-CMC LBL films) with antibacterial and healing properties using a spin-coating method. SEM images showed that the CSN-CMC LBL films had completely different degrees of roughness at the bottom (hydrophilic layer) and at the top (hydrophobic layer), with the roughness at the top increasing as the number of layers increased. The CSN and CMC were used to prepare asymmetric LBL films via the electrostatic attraction of -COO- and NH3+. In addition, adhesion and water contact angle tests showed that the CSN-CMC LBL films had enhanced tissue adhesion and good hydrophobicity. These materials had excellent antimicrobial activity and good biocompatibility. Importantly, the animal infection model results showed that CSN-CMC-8 LBL films effectively eliminated the infection in vivo, inhibited inflammation, promoted vascular regeneration, accelerated the epithelialization process, and achieved high quality healing. Overall, the CSN-CMC LBL films in this study showed considerable potential for application in infected wound healing.

Cascade encapsulation of antimicrobial peptides, exosomes and antibiotics in fibrin-gel for first-aid hemostasis and infected wound healing.

Wounding is one of the most common healthcare problems. Bioactive hydrogels have attracted much attention in first-aid hemostasis and wound healing due to their excellent biocompatibility, antibacterial properties, and pro-healing bioactivity. However, their applications are limited by inadequate mechanical properties. In this study, we first prepared edible rose-derived exosome-like nanoparticles (ELNs) and used them to encapsulate antimicrobial peptides (AMP), abbreviated as ELNs(AMP). ELNs(AMP) showed superior intracellular antibacterial activity, 2.5 times greater than AMP, in in vitro cell infection assays. We then prepared and tested an FDA-approved fibrin-gel of fibrinogen and thrombin encapsulating ELNs(AMP) and novobiocin sodium salt (NB) (ELNs(AMP)/NB-fibrin-gels). The fibrin gel showed a sustained release of ELNs(AMP) and NB over the eight days of testing. After spraying onto the skin, the formulation underwent in situ gelation and developed a stable patch with excellent hemostatic performance in a mouse liver injury model with hemostasis in 31 s, only 35.6 % of the PBS group. The fibrin gel exhibited pro-wound healing properties in the mouse-infected skin defect model. The thickness of granulation tissue and collagen of the ELNs(AMP)/NB-fibrin-gels group was 4.00, 6.32 times greater than that of the PBS group. In addition, the ELNs(AMP)/NB-fibrin-gels reduced inflammation (decreased mRNA levels of TNF-α, IL-1ß, IL6, MCP1, and CXCL1) at the wound sites and demonstrated a biocompatible and biosafe profile. Thus, we have developed a hydrogel system with excellent hemostatic, antibacterial, and pro-wound healing properties, which may be a candidate for next-generation tissue regeneration with a wide clinical application for first-aid hemostasis and infected wound healing.

Multidisciplinary expert consensus statements and recommendations for use of hypochlorous acid as a solution for negative pressure wound therapy with instillation.

BACKGROUND: HOCl (eg, pHAp) preserved solutions have antimicrobial properties and are considered safe and effective for wound management. NPWTi-d (or NPWTi) is an established adjunctive wound modality for a variety of wound etiologies in various anatomic locations in which an instillate solution dwells on the surface of the wound to assist in wound bed preparation. A variety of solutions have been used, including 0.9% normal saline wound cleansers and antiseptics. pHAp is growing in popularity as the solution of choice for NPWTi-d. OBJECTIVE: To evaluate consensus statements on the use of NPWTi-d with pHAp. METHODS: A 15-member multidisciplinary panel of expert clinicians in the United States, Canada, and France convened in person in April 2023 in Washington, D.C. and/or corresponded later to discuss 10 statements on the use of pHAp with NPWTi-d. The panelists then replied "agree" or "disagree" to each statement and had the option to provide comments. RESULTS: Ten consensus statements are presented, along with the proportion of agreement or disagreement and summary comments. Although agreement with the statements on NPWTi-d with pHAp varied, the statements appear to reflect individual preferences for use rather than concerns about safety or efficacy. CONCLUSION: The consensus indicates that NPWTi-d with pHAp can have a beneficial effect in wound care.

Sprayable and self-healing chitosan-based hydrogels for promoting healing of infected wound via anti-bacteria, anti-inflammation and angiogenesis.

Treatment of infected wound by simultaneously eliminating bacteria and inducing angiogenesis to promote wound tissue regeneration remains a clinical challenge. Dynamic and reversable hydrogels can adapt to irregular wound beds, which have raised great attention as wound dressings. Herein, a sprayable chitosan-based hydrogel (HPC/CCS/ODex-IGF1) was developed using hydroxypropyl chitosan (HPC), caffeic acid functionalized chitosan (CCS), oxidized dextran (ODex) to crosslink through the dynamic imine bond, which was pH-responsive to the acidic microenvironment and could controllably release insulin growth factor-1 (IGF1). The HPC/CCS/ODex-IGF1 hydrogels not only showed self-healing, self-adaptable and sprayable properties, but also exhibited excellent antibacterial ability, antioxidant property, low-cytotoxicity and angiogenetic activity. In vivo experiments demonstrated that hydrogels promoted tissue regeneration and healing of bacteria-infected wound with a rate of approximately 98.4 % on day 11 by eliminating bacteria, reducing inflammatory and facilitating angiogenesis, demonstrating its great potential for wound dressing.

Bacterial lipase-responsive polydopamine nanoparticles for detection and synergistic therapy of wound biofilms infection.

Wound biofilms represent an elusive conundrum in contemporary treatment and diagnostic options, accredited to their escalating antibiotic resistance and interference in chronic wound healing processes. Here, we developed mesoporous polydopamine (mPDA) nanoparticles, and grafted with rhodamine B (Rb) as biofilm lipase responsive detection probe, followed by π - π stacking mediated ciprofloxacin (CIP) loading to create mP-Rb@CIP nanoparticles. mPDA NPs with a melanin structure could quench fluorescence emissions of Rb. Once encountering biofilm in vivo, the ester bond in Rb and mPDA is hydrolyzed by elevated lipase concentrations, triggering the liberation of Rb and restore fluorescence emissions to achieve real-time imaging of biofilm-infected wounds. Afterwards, the 808 nm near-infrared (NIR) illumination initiates a spatiotemporal controlled antibacterial photothermal therapy (PTT), boosting its effectiveness through photothermal-triggered CIP release for synergistic biofilm eradication. The mP-Rb@CIP platform exhibits dual diagnostic and therapeutic functions, efficaciously treating biofilm-infected wounds in vivo and in vitro. Particularly, the mP-Rb@CIP/NIR procedure expedites wound-healing by alleviating oxidative stress, modulating inflammatory mediators, boosting collagen synthesis, and promoting angiogenesis. Taken together, the theranostic nanosystem strategy holds significant potential for addressing wound biofilm-associated infections.

Metal-based nanoparticles: an alternative treatment for biofilm infection in hard-to-heal wounds.

Metal-based nanoparticles (MNPs) are promoted as effective compounds in the treatment of bacterial infections and as possible alternatives to antibiotics. These MNPs are known to affect a broad spectrum of microorganisms using a multitude of strategies, including the induction of reactive oxygen species and interaction with the inner structures of the bacterial cells. The aim of this review was to summarise the latest studies about the effect of metal-based nanoparticles on pathogenic bacterial biofilm formed in wounds, using the examples of Gram-positive bacterium Staphylococcus aureus and Gram-negative bacterium Pseudomonas aeruginosa, as well as provide an overview of possible clinical applications.

Injectable nanoparticle-crosslinked xyloglucan/ε-poly-l-lysine composite hydrogel with hemostatic, antimicrobial, and angiogenic properties for infected wound healing.

Skin wounds are susceptible to infection, leading to severe inflammatory reactions that can progress to chronic wounds, ultimately causing significant physical and mental distress to the patient. In this study, we propose an injectable composite hydrogel achieved through one-pot gelation of oxidized xyloglucan (OXG), cationic polyamide ε-poly-l-lysine (EPL), and surface amino-rich silicon nanoparticles (SiNPs). OXG exhibits commendable anti-inflammatory properties and provides crosslinking sites. SiNPs serve as mechanically reinforced crosslinkers, facilitating the construction of a dynamic Schiff base network. SiNPs significantly reduced the gelation time to 3 s and tripled the storage modulus of the hydrogels. Additionally, the combination of EPL and SiNPs demonstrated synergistic antimicrobial activity against both S. aureus and E. coli. Notably, the hydrogel effectively halted liver bleeding within 30 s. The hydrogel demonstrated outstanding shear-thinning and self-healing properties, crucial considerations for the design of injectable hydrogels. Furthermore, its efficacy was evaluated as a wound dressing in a mouse model with S. aureus infection. The results indicated that, compared to commercial products, the hydrogel exhibited a shorter wound healing time, decreased inflammation, thinner epithelium, increased hair follicles, enhanced neovascularization, and more substantial collagen deposition. These findings strongly suggest the promising potential of the proposed hydrogel as an effective wound dressing for the treatment of infected wounds.

Multifunctional fucoidan-loaded Zn-MOF-encapsulated microneedles for MRSA-infected wound healing.

Infected wound healing remains a challenging task in clinical practice due to several factors: (I) drug-resistant infections caused by various pathogens, (II) persistent inflammation that hinders tissue regeneration and (III) the ability of pathogens to persist intracellularly and evade antibiotic treatment. Microneedle patches (MNs), recognized for their effecacious and painless subcutaneous drug delivery, could greatly enhance wound healing if integrated with antibacterial functionality and tissue regenerative potential. A multifunctional agent with subcellular targeting capability and contained novel antibacterial components, upon loading onto MNs, could yield excellent therapeutic effects on wound infections. In this study, we sythesised a zeolitic imidazolate framework-8 nanoparticles (ZIF-8 NPs) loaded with low molecular weight fucoidan (Fu) and further coating by hyaluronic acid (HA), obtained a multifunctional HAZ@Fu NPs, which could hinders Methicillin-resistant Staphylococcus aureus (MRSA) growth and promotes M2 polarization in macrophages. We mixed HAZ@Fu NPs with photocrosslinked gelatin methacryloyl (GelMA) and loaded it into the tips of the MNs (HAZ@Fu MNs), administered to mice model with MRSA-infected full-thickness cutaneous wounds. MNs are able to penetrate the skin barrier, delivering HAZ@Fu NPs into the dermal layer. Since cells within infected tissues extensively express the HA receptor CD44, we also confirmed the HA endows the nanoparticles with the ability to target MRSA in subcellular level. In vitro and in vivo murine studies have demonstrated that MNs are capable of delivering HAZ@Fu NPs deep into the dermal layers. And facilitated by the HA coating, HAZ@Fu NPs could target MRSA surviving at the subcellular level. The effective components, such as zinc ions, Fu, and hyaluronic acid could sustainably released, which contributes to antibacterial activity, mitigates inflammation, promotes epithelial regeneration and fosters neovascularization. Through the RNA sequencing of macrophages post co-culture with HAZ@Fu, the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis reveals that the biological functionalities associated with wound healing could potentially be facilitated through the PI3K-Akt pathway. The results indicate that the synergistic application of HAZ@Fu NPs with biodegradable MNs may serve as a significant adjunct in the treatment of infected wounds. The intricate mechanisms driving its biological effects merit further investigation.

Assessment of the ability of Pseudomonas aeruginosa and Staphylococcus aureus to create biofilms during wound healing in a rat model treated with carboxymethyl cellulose/carboxymethyl chitosan hydrogel containing EDTA.

The primary objective of this study was to develop a carboxymethyl cellulose (CMC) and carboxymethyl chitosan (CMCS) hydrogel containing ethylene diamine tetra acetic acid (EDTA) as the materials for wound healing. CMC and CMCS solutions were prepared with a concentration of 4% (w/v). These solutions were made using normal saline serum with a concentration of 0.5% (v/v). Additionally, EDTA with the concentrations of 0.01%, 0.05%, 0.1%, 0.5%, 1%, and 2% (w/v) was included in the prepared polymer solution. The analysis of the hydrogels revealed that they possess porous structures with interconnected pores, with average in size 88.71 ± 5.93 µm. The hydrogels exhibited a swelling capacity of up to 60% of their initial weight within 24 h, as indicated by the weight loss and swelling measurements. The antibacterial experiments showed that the formulated CMC/CMCS/EDTA 0.5% hydrogel inhibited the growth of Staphylococcus aureus and Pseudomonas aeruginosa. Moreover, the produced hydrogels were haemocompatible and biocompatible. At the last stage, the evaluation of wound healing in the animal model demonstrated that the use of the produced hydrogels significantly improved the process of wound healing. Finally, the findings substantiated the effectiveness of the formulated hydrogels as the materials for promoting wound healing and antibacterial agents.

Assessing antibacterial efficacy of a polyhexanide hydrogel versus alginate-based wound dressing in burns.

OBJECTIVE: Burn injuries pose a heightened risk of infection, which is primarily responsible for increased morbidity and mortality. Factors such as extensive skin damage and compromised immunity exacerbate this vulnerability. Pseudomonas aeruginosa and Staphylococcus aureus are frequently identified in burns, with Gram-negative Pseudomonas aeruginosa often resistant to antibacterial agents. While Flaminal, an alginate-based wound dressing (Flen Health, Belgium), aids wound healing, its antibacterial effects are limited compared with 1% silver sulfadiazine (1% SSD). In contrast, Prontosan Wound Gel X, a betaine and polyhexanide-based hydrogel (B. Braun Medical AG, Switzerland), has been shown to effectively combat various microbes and promotes wound healing. METHOD: In this study, two research cohorts were retrospectively established (control group: patients receiving standard of care with the alginate-based wound dressing; intervention group: patients receiving the polyhexanide hydrogel wound dressing), comprising patients admitted to a burn centre between 2019 and 2022. Patients were eligible when continuous wound treatment with either of the two wound dressings was performed. Laser Doppler imaging (LDI) scans were conducted. Regions of interest (ROIs) were selected based on LDI scans and divided into healing time categories. Wound swabs were collected and the presence of Pseudomonas aeruginosa and Staphylococcus aureus was documented. Bacterial load was evaluated using a semiquantitative scale. Wound healing was recorded. RESULTS: The control group consisted of 31 patients with 93 ROIs, while the intervention group had 67 ROIs involving 29 patients. Both groups exhibited similar proportions of healing time categories (p>0.05). The polyhexanide hydrogel dressing outperformed the alginate-based dressing in antiseptic efficacy by significantly reducing the incidence of Pseudomonas aeruginosa- and Staphylococcus aureus-positive cultures in patients' wounds. Wound healing time for conservative treatment was comparable between groups. CONCLUSION: In this study, the polyhexanide hydrogel dressing minimised Pseudomonas aeruginosa and Staphylococcus aureus colonisation in burn wounds, demonstrating strong antibacterial properties, emphasising its potential to minimise infections in burn injuries.

Improving wound infection management: education and evaluation of an infection management pathway.

OBJECTIVE: To assess the clinical impact and acceptance of an infection management (IM) pathway, designed to improve the consistency of care of wound infection when introduced, and supported by an educational programme. METHOD: An education and evaluation programme (T3 programme) was-conducted in Portugal, Spain and Italy. This consisted of a two-hour educational, virtual seminar, followed by a four-week evaluation of an IM pathway during which survey data were collected on the impact of this pathway on clinician-selected patients. Finally, all participants reconvened for a virtual meeting during which the combined results were disseminated. The pathway provided guidance to clinicians regarding the targeted use of antimicrobial wound dressings according to the presence and absence of signs and symptoms of wound infection. RESULTS: Responses relating to 259 patients treated according to the IM pathway, 139 (53.7%) of whom had received previous antimicrobial treatment, were captured. Signs and symptoms of infection resolved within four weeks of treatment in >90% of patients. All 25 patients who had received prior antimicrobial treatment for ≥3 months experienced a resolution in the signs and symptoms of infection within four weeks. The majority of participating clinicians agreed that the IM pathway improved decision-making (94.9%) and confidence (97.3%), and helped to determine the correct antimicrobial treatment (91.4%) in the context of wound infection. CONCLUSION: The T3 programme was an efficient way to deliver a structured educational programme. The use of the IM pathway resulted in >90% of patients achieving resolution of their signs and symptoms of wound infection.