ABSTRACT
This study aimed to characterize the anatomical and physiological features of pits and fissures in primary and permanent molars by microtomographic (micro-CT) examination and three-dimensional (3D) printing. The occlusal surfaces of 84 primary molars and 60 permanent third molars were examined. The samples were scanned with micro-CT and the occlusal surface separated. The areas of the crown, its occlusal part, and fissures and pits were calculated. Digital impression of the occlusal surface was created and 3D printed. The frequency of different fissure types was determined by direct observation. Data were subjected to statistical analysis using Mann-Whitney U Test and chi-square test (p < 0.05). There was statistically significant difference between the ratio of occlusal surface and the crown area for the molars in primary and permanent dentitions (24.78% and 28.85% respectively, p < 0.05). In terms of the percentage ratio of the fissure area to the occlusal surface (24.24% and 22.30%) and the fissure area to the crown (6.02% and 6.52%), no significant difference was observed (p > 0.05). V-shaped fissures were predominant in both primary and permanent teeth, with a higher occurrence in primary dentition (59.48%, p < 0.05). Permanent molars exhibited a higher prevalence of I-type and U-type fissure configurations compared to primary molars (p < 0.05), with I-type fissures being the least common in primary molars. In both dentitions there was no statistically significant difference in the prevalence of IK-configuration (p > 0.05). The fissure depth was significantly greater in permanent molars than primary molars (p < 0.05). In conclusion, this study revealed remarkable diversity in fissure morphology among primary and permanent molars.
Subject(s)
Molar , Printing, Three-Dimensional , Tooth, Deciduous , X-Ray Microtomography , Humans , X-Ray Microtomography/methods , Molar/diagnostic imaging , Molar/anatomy & histology , Tooth, Deciduous/diagnostic imaging , Dental Fissures/diagnostic imaging , Dentition, PermanentABSTRACT
Among all of the materials used in tissue engineering in order to develop bioequivalents, collagen shows to be the most promising due to its superb biocompatibility and biodegradability, thus becoming one of the most widely used materials for scaffold production. However, current imaging techniques of the cells within collagen scaffolds have several limitations, which lead to an urgent need for novel methods of visualization. In this work, we have obtained groups of collagen scaffolds and selected the contrasting agents in order to study pores and patterns of cell growth in a non-disruptive manner via X-ray computed microtomography (micro-CT). After the comparison of multiple contrast agents, a 3% aqueous phosphotungstic acid solution in distilled water was identified as the most effective amongst the media, requiring 24 h of incubation. The differences in intensity values between collagen fibers, pores, and masses of cells allow for the accurate segmentation needed for further analysis. Moreover, the presented protocol allows visualization of porous collagen scaffolds under aqueous conditions, which is crucial for the multimodal study of the native structure of samples.
Subject(s)
Collagen , Tissue Scaffolds , X-Ray Microtomography , Tissue Scaffolds/chemistry , X-Ray Microtomography/methods , Collagen/chemistry , Collagen/metabolism , Tissue Engineering/methods , Animals , Water/chemistry , Porosity , Cell Culture Techniques, Three Dimensional/methods , HumansABSTRACT
The auditory ossicles amplify and transmit sound from the environment to the inner ear. The distribution of bone mineral density is crucial for the proper functioning of sound transmission as the ossicles are suspended in an air-filled chamber. However, little is known about the distribution of bone mineral density along the human ossicular chain and within individual ossicles. To investigate this, we analyzed fresh-frozen human specimens using synchrotron-based phase-contrast microtomography. In addition, we analyzed the volume and porosity of the ossicles. The porosity for the auditory ossicles lies, on average, between 1.92% and 9.85%. The average volume for the mallei is 13.85 ± 2.15 mm3, for the incudes 17.62 ± 4.05 mm3 and 1.24 ± 0.29 mm3 for the stapedes. The bone density distribution showed a similar pattern through all samples. In particular, we found high bone mineralization spots on the anterior crus of the stapes, its footplate, and along areas that are crucial for the transmission of sound. We could also see a correlation between low bone mineral density and holey areas where the bone is only very thin or missing. Our study identified a similar pattern of bone density distribution within all samples: regions exposed to lower forces generally show higher bone density. Further, we observed that the stapes shows high bone mineral density along the anterior crus and its footplate, which may indicate its importance in transmitting sound waves to the inner ear.
Subject(s)
Bone Density , Ear Ossicles , Synchrotrons , X-Ray Microtomography , Humans , Ear Ossicles/diagnostic imaging , Ear Ossicles/physiology , Ear Ossicles/anatomy & histology , X-Ray Microtomography/methods , Porosity , Female , Aged , Male , Middle Aged , Stapes/physiology , Stapes/diagnostic imagingABSTRACT
PURPOSE: To establish molar root canal model with micro-computed tomography (Micro-CT) and evaluate the removal efficiency of calcium hydroxide by different methods. METHODS: Eight molar teeth (24 root canals) extracted from the Department of General Dentistry, Shanghai Ninth People's Hospital from October 2023 to February 2024 were collected. Root canal preparation was instrumented by M3 according to standard root canal treatment procedures, then calcium hydroxide was injected into the root canal. One week later, the samples were randomly divided into 3 groups according to different irrigation methods(n=8): lateral opening syringe group, ultrasonic group and sonic vibration group. Micro-CT was used to reconstruct the root canal system before and after irrigation, and independent root canals were marked with different colors. The root canals were divided into upper root segment, middle root segment and apex segment. The volume of calcium hydroxide in each canal was calculated, and the clearance rate of calcium hydroxide was compared among the groups. SPSS 19.0 software package was used for statistical analysis. RESULTS: None of the three methods could completely remove calcium hydroxide from the root canal. When sodium hypochlorite was used as the flushing solution, the removal effect of ultrasonic group and sonic vibration group was significantly better than that of lateral opening syringe group(Pï¼0.05). The removal efficiency of calcium hydroxide by ultrasonic group and sonic vibration group was similar, and the difference was not statistically significant(Pï¼0.05). The removal rate of calcium hydroxide in apical segment was low. CONCLUSIONS: Micro-CT can reconstruct the molar root canal model efficiently for evaluating the removal effect of calcium hydroxide. The removal efficiency of calcium hydroxide in ultrasonic group and sonic vibration group is similar, and both are better than that in lateral syringe group.
Subject(s)
Calcium Hydroxide , Dental Pulp Cavity , X-Ray Microtomography , Calcium Hydroxide/chemistry , X-Ray Microtomography/methods , Humans , Dental Pulp Cavity/diagnostic imaging , Dental Pulp Cavity/drug effects , Molar , Root Canal Irrigants , Root Canal Preparation/methods , Sodium Hypochlorite , VibrationABSTRACT
Objective. Auto-segmentation in mouse micro-CT enhances the efficiency and consistency of preclinical experiments but often struggles with low-native-contrast and morphologically complex organs, such as the spleen, resulting in poor segmentation performance. While CT contrast agents can improve organ conspicuity, their use complicates experimental protocols and reduces feasibility. We developed a 3D Cycle Generative Adversarial Network (CycleGAN) incorporating anatomy-constrained U-Net models to leverage contrast-enhanced CT (CECT) insights to improve unenhanced native CT (NACT) segmentation.Approach.We employed a standard CycleGAN with an anatomical loss function to synthesize virtual CECT images from unpaired NACT scans at two different resolutions. Prior to training, two U-Nets were trained to automatically segment six major organs in NACT and CECT datasets, respectively. These pretrained 3D U-Nets were integrated during the CycleGAN training, segmenting synthetic images, and comparing them against ground truth annotations. The compound loss within the CycleGAN maintained anatomical fidelity. Full image processing was achieved for low-resolution datasets, while high-resolution datasets employed a patch-based method due to GPU memory constraints. Automated segmentation was applied to original NACT and synthetic CECT scans to evaluate CycleGAN performance using the Dice Similarity Coefficient (DSC) and the 95th percentile Hausdorff Distance (HD95p).Main results.High-resolution scans showed improved auto-segmentation, with an average DSC increase from 0.728 to 0.773 and a reduced HD95p from 1.19 mm to 0.94 mm. Low-resolution scans benefited more from synthetic contrast, showing a DSC increase from 0.586 to 0.682 and an HD95preduction from 3.46 mm to 1.24 mm.Significance.Implementing CycleGAN to synthesize CECT scans substantially improved the visibility of the mouse spleen, leading to more precise auto-segmentation. This approach shows the potential in preclinical imaging studies where contrast agent use is impractical.
Subject(s)
Contrast Media , Imaging, Three-Dimensional , Spleen , X-Ray Microtomography , Animals , Mice , Spleen/diagnostic imaging , X-Ray Microtomography/methods , Imaging, Three-Dimensional/methods , Algorithms , Image Processing, Computer-Assisted/methods , Neural Networks, ComputerABSTRACT
OBJECTIVE: Evaluate the impact of adjustment procedures - cut-out-rescan (COR) and data exchange by over-scanning (DEOS) techniques - through CAD/CAM software on the marginal fit outcome of ceramic crowns. METHODS AND MATERIALS: Twenty-eight de-identified teeth were adapted in a mandibular typodont set. Tooth #19 was prepared for a lithium disilicate crown and seven groups, G0 to G6 (n=10), were created based on the rescanned areas (mesial and/or buccal) on the typodont using an intraoral scanner through COR or DEOS techniques. A digital workflow was used to design and mill 70 crowns according to the groups. Each crown was temporarily cemented on tooth #19 and scanned with micro-computed tomography to measure the marginal fit. The data were analyzed statistically by the Kruskal-Wallis test followed by the Mann-Whitney test to compare the groups pairwise as a post-hoc (α=0.05). RESULTS: Statistically significant differences were found for vertical misfit (µm) between the groups for Marginal Gap Buccal (MGB) and Marginal Gap Mesial (MGM) (p=0.003 and p=0.029, respectively). No significant difference was found for Finish Line Buccal (FLB) and Finish Line Mesial (FLM) (p=0.062 and p=0.092, respectively). G3 (COR buccal and mesial) had the highest MGB (57.75 µm), statistically different from all other groups. G4 (DEOS buccal) (41.60 µm) was different from G6 (DEOS buccal and mesial) (44.21 µm) (p=0.023). For MGM, G0 (control) (53.96 µm) was different from G5 (DEOS mesial) (45.76 µm) and G6 (DEOS buccal and mesial) (48.56 vm) (p=0.013 and p=0.041, respectively) and G2 (COR mesial) (58.43 µm) was different from G5 (DEOS mesial) (45.76 µm) (p=0.016). CONCLUSIONS: Despite a statistically significant difference in certain groups for both techniques, COR and DEOS techniques are viable options for image editing during acquisition. Lithium disilicate crowns can be produced with satisfactory marginal gap values utilizing a chairside CAD/CAM system.
Subject(s)
Computer-Aided Design , Crowns , Dental Marginal Adaptation , Dental Porcelain , Dental Prosthesis Design , Humans , Dental Prosthesis Design/methods , X-Ray Microtomography/methodsABSTRACT
INTRODUCTION: Bronchopulmonary dysplasia (BPD) impacts life expectancy and long-term quality of life. Currently, BPD mouse models exposed to high oxygen are frequently used, but to reevaluate their relevance to human BPD, we attempted an assessment using micro-computed tomography (µCT). METHODS: Newborn wildtype male mice underwent either 21% or 95% oxygen exposure for 4 days, followed until 8 wk. Weekly µCT scans and lung histological evaluations were performed independently. RESULTS: Neonatal hyperoxia for 4 days hindered lung development, causing alveolar expansion and simplification. Histologically, during the first postnatal week, the exposed group showed a longer mean linear intercept, enlarged alveolar area, and a decrease in alveolar number, diminishing by week 4. Weekly µCT scans supported these findings, revealing initially lower lung density in newborn mice, increasing with age. However, the high-oxygen group displayed higher lung density initially. This difference diminished over time, with no significant contrast to controls at 3 wk. Although no significant difference in total lung volume was observed at week 1, the high-oxygen group exhibited a decrease by week 2, persisting until 8 wk. CONCLUSION: This study highlights µCT-detected changes in mice exposed to high oxygen. BPD mouse models might follow a different recovery trajectory than humans, suggesting the need for further optimization.
Subject(s)
Animals, Newborn , Bronchopulmonary Dysplasia , Hyperoxia , Lung , Oxygen , X-Ray Microtomography , Animals , X-Ray Microtomography/methods , Mice , Male , Bronchopulmonary Dysplasia/diagnostic imaging , Oxygen/metabolism , Hyperoxia/diagnostic imaging , Lung/diagnostic imaging , Disease Models, Animal , Pulmonary Alveoli/diagnostic imaging , Mice, Inbred C57BLABSTRACT
AIM: The aim of this study was to evaluate the removal efficiency of PRMTA and ECMPremixed applied to the coronal third according to the RET by UI and to examine the effect of different solutions on material removal. MATERIALS AND METHODS: 40 permanent upper central teeth were used to simulate immature teeth. The samples were irrigated with 1.5% NaOCl and calcium hydroxide was placed. Samples were incubated in PBS. Then irrigation was done with 17% EDTA, the samples were randomly divided into 2 groups (n = 20):Group 1: PRMTA, Group 2: ECM Premixed. The materials were placed in the samples. Then the samples were scanned with micro-CT. Materials were removed by UI. Micro-CT scan of the samples was performed. Each material group was divided into 2 subgroups (n = 10): Group1 was MTAD, group2 was irrigated with 10% CA; then micro-CT was performed. Obtained images were positioned in DataViewer and analyzed with CTAn. The obtained data were statistically analyzed in IBM SPSS 25. The significance level was determined as 5%. RESULTS: There was no significant difference between the initial volumes of the materials (p > 0.05). The amount of the remaining material after UI was significantly higher in the PRMTA (0.7471%) group compared to the ECM Premixed (0.0093%). There was no significant difference in terms of remaining material after irrigation with MTAD and CA in both groups (p > 0.05). CONCLUSION: A great deal of the materials were removed by UI under the operation microscope. ECM Premixed was removed more effectively compared to the PRMTA. And, acidic solutions did not provide any additional benefit in material removal.
Subject(s)
X-Ray Microtomography , X-Ray Microtomography/methods , Humans , Calcium Hydroxide/therapeutic use , Root Canal Irrigants/therapeutic use , Dental Cements , In Vitro Techniques , Root Canal Filling Materials , Sodium Hypochlorite/therapeutic useABSTRACT
This study evaluated the effect of ultrasonic agitation on the filling capacity of ready-to-use calcium silicate-based sealer Bio-C Sealer (BCS, Angelus, Paraná, Brazil) or powder-liquid BioRoot RCS (BR, Septodont, Saint-Maur-des-Fossés, France) using curved artificial canals by micro-computed tomography (micro-CT). Additionally, flow (mm) and flow area (mm2) were evaluated for both materials. Acrylic resin main canal (60° curvature and 5 mm radius, with 3 lateral canals in the cervical, middle, and apical thirds) were prepared up to size 40/.05 (Prodesign Logic, Brazil). The agitation method was used with ultrasonic tip (US, Irrisonic, Helse, Brazil): BCS, BCS/US, BR, and BR/US. All specimens were filled using the single-cone technique. The samples were scanned by micro-CT (8,74 µm) after obturation. The percentage of filling material and voids were calculated. Flow was evaluated based on ISO 6876/2012 standards (mm) and area (mm2). The data were statistically analyzed using ANOVA and Tukey tests (α = 0.05). BR/US showed lower percentage of filling material in the lateral canals than and, BCS/US (p<0.05). BR/US resulted in a higher percentage of voids than BR in the lateral apical third (p<0.05). BCS showed higher flow than BR (p<0.05). BCS and BR presented proper filling capacity in the simulated curved canals regardless of the use of ultrasonic agitation. However, BR/US showed more voids in the apical third. BCS demonstrates higher filling ability.
Subject(s)
Calcium Compounds , Root Canal Filling Materials , Silicates , Calcium Compounds/chemistry , Root Canal Filling Materials/chemistry , Silicates/chemistry , X-Ray Microtomography/methods , Powders , Ultrasonics , Materials Testing , Root Canal Obturation/methodsABSTRACT
BACKGROUND: Xenopus laevis, the African clawed frog, is a versatile vertebrate model organism in various biological disciplines, prominently in developmental biology to study body plan reorganization during metamorphosis. However, a notable gap exists in the availability of comprehensive datasets encompassing Xenopus' late developmental stages. FINDINGS: This study utilized micro-computed tomography (micro-CT), a noninvasive 3-dimensional (3D) imaging technique with micrometer-scale resolution, to explore the developmental dynamics and morphological changes in Xenopus laevis. Our approach involved generating high-resolution images and computed 3D models of developing Xenopus specimens, spanning from premetamorphosis tadpoles to fully mature adults. This dataset enhances our understanding of vertebrate development and supports various analyses. We conducted a careful examination, analyzing body size, shape, and morphological features, focusing on skeletogenesis, teeth, and organs like the brain and gut at different stages. Our analysis yielded valuable insights into 3D morphological changes during Xenopus' development, documenting details previously unrecorded. These datasets hold the solid potential for further morphological and morphometric analyses, including segmentation of hard and soft tissues. CONCLUSIONS: Our repository of micro-CT scans represents a significant resource that can enhance our understanding of Xenopus' development and the associated morphological changes in the future. The widespread utility of this amphibian species, coupled with the exceptional quality of our scans, which encompass a comprehensive series of developmental stages, opens up extensive opportunities for their broader research application. Moreover, these scans can be used in virtual reality, 3D printing, and educational contexts, further expanding their value and impact.
Subject(s)
Imaging, Three-Dimensional , X-Ray Microtomography , Xenopus laevis , Animals , Xenopus laevis/growth & development , X-Ray Microtomography/methods , Imaging, Three-Dimensional/methods , Metamorphosis, Biological , Larva/growth & developmentABSTRACT
Detailed study of non-failing human hearts rejected for transplantation provides a unique opportunity to perform structural analyses across microscopic and macroscopic scales. These techniques include tissue clearing (modified immunolabeling-enabled three-dimensional (3D) imaging of solvent-cleared organs) and immunohistochemical staining. Mesoscopic examination procedures include stereoscopic dissection and micro-computed tomographic (CT) scanning. Macroscopic examination procedures include gross dissection, photography (including anaglyphs and photogrammetry), CT, and 3D printing of the physically or virtually dissected or whole heart. Before macroscopic examination, pressure-perfusion fixation may be performed to maintain the 3D architecture and physiologically relevant morphology of the heart. The application of these techniques in combination to study the human heart is unique and crucial in understanding the relationship between distinct anatomic features such as coronary vasculature and myocardial innervation in the context of the 3D architecture of the heart. This protocol describes the methodologies in detail and includes representative results to illustrate progress in the research of human cardiac anatomy.
Subject(s)
Heart , Imaging, Three-Dimensional , Humans , Heart/anatomy & histology , Heart/diagnostic imaging , Imaging, Three-Dimensional/methods , X-Ray Microtomography/methods , Dissection/methods , Printing, Three-DimensionalABSTRACT
BACKGROUND: Development of reliable disease activity biomarkers is critical for diagnostics, prognostics, and novel drug development. Although computed tomography (CT) is the gold-standard for quantification of bone erosions, there are no consensus approaches or rationales for utilization of specific outcome measures of erosive arthritis in complex joints. In the case of preclinical models, such as sexually dimorphic tumor necrosis factor transgenic (TNF-Tg) mice, disease severity is routinely quantified in the ankle through manual segmentation of the talus or small regions of adjacent bones primarily due to the ease in measurement. Herein, we sought to determine the particular hindpaw bones that represent reliable biomarkers of sex-dependent disease progression to guide future investigation and analysis. METHODS: Hindpaw micro-CT was performed on wild-type (n = 4 male, n = 4 female) and TNF-Tg (n = 4 male, n = 7 female) mice at monthly intervals from 2-5 (females) and 2-8-months (males) of age, since female TNF-Tg mice exhibit early mortality from cardiopulmonary disease at approximately 5-6-months. Further, 8-month-old WT (n = 4) and TNF-Tg males treated with anti-TNF monoclonal antibodies (n = 5) or IgG placebo isotype controls (n = 6) for 6-weeks were imaged with micro-CT every 3-weeks. For image analysis, we utilized our recently developed high-throughput and semi-automated segmentation strategy in Amira software. Synovial and osteoclast histology of ankle joints was quantified using Visiopharm. RESULTS: First, we demonstrated that the accuracy of automated segmentation, determined through analysis of ~9000 individual bones by a single user, was comparable in wild-type and TNF-Tg hindpaws before correction (79.2±8.9% vs 80.1±5.1%, p = 0.52). Compared to other bone compartments, the tarsal region demonstrated a sudden, specific, and significant bone volume reduction in female TNF-Tg mice, but not in males, by 5-months (4-months 4.3± 0.22 vs 5-months 3.4± 0.62 mm3, p<0.05). Specifically, the cuboid showed significantly reduced bone volumes at early timepoints compared to other tarsals (i.e., 4-months: Cuboid -24.1±7.2% vs Talus -9.0±5.9% of 2-month baseline). Additional bones localized to the anterolateral region of the ankle also exhibited dramatic erosions in the tarsal region of females, coinciding with increased synovitis and osteoclasts. In TNF-Tg male mice with severe arthritis, the talus and calcaneus exhibited the most sensitive response to anti-TNF therapy measured by effect size of bone volume change over treatment period. CONCLUSIONS: We demonstrated that sexually dimorphic changes in arthritic hindpaws of TNF-Tg mice are bone-specific, where the cuboid serves as a reliable early biomarker of erosive arthritis in female mice. Adoption of automated segmentation approaches in pre-clinical or clinical models has potential to translate quantitative biomarkers to monitor bone erosions in disease and evaluate therapeutic efficacy.
Subject(s)
Biomarkers , Mice, Transgenic , Tumor Necrosis Factor-alpha , X-Ray Microtomography , Animals , Female , Male , Mice , X-Ray Microtomography/methods , Tumor Necrosis Factor-alpha/antagonists & inhibitors , Disease Models, Animal , Sex Factors , Mice, Inbred C57BL , Sex CharacteristicsABSTRACT
PURPOSE: Using X-ray micro-computed tomography (micro-CT), the aim of this study was to measure the porosity of two tricalcium silicate sealers (EndoSequence BC and NeoSealer Flo) applied using three obturation techniques (single-cone, warm-vertical, and cold-lateral) to six single-rooted human teeth. METHODS: Six extracted, single-rooted human teeth were shaped with ProTaper Next rotary files and obturated with EndoSequence BC or NeoSealer Flo sealers and gutta-percha (GP) using one of the three techniques above. Micro-CT was used to map the full length of the canals. Deep learning cross-sectional segmentation was used to analyze image slices of the apical (0-2 mm) and coronal (14-16 mm from the apex) regions (n = 230-261 per tooth) for the areas of GP and sealer, as well as porosity. Median (%) with interquartile range of porosity were calculated , and the results were statistically analyzed with the Kruskal-Wallis test. RESULTS: In the apical region, EndoSequence BC had significantly fewer pores than NeoSealer Flo with the single-cone obturation (% median-interquartile range, IQR: 0.00-1.62) and warm-vertical condensation (5.57-10.32) techniques, whereas in the coronal region, NeoSealer Flo had significantly fewer pores than EndoSequence BC with these two techniques (0.39-5.02) and (0.10-0.19), respectively. There was no significant difference in porosity between the two sealers for the cold-lateral condensation technique in both the apical and coronal regions. CONCLUSION: For optimal obturation, the choice of technique and sealer is critical.
Subject(s)
Calcium Compounds , Root Canal Filling Materials , Root Canal Obturation , Silicates , X-Ray Microtomography , Porosity , Root Canal Obturation/methods , X-Ray Microtomography/methods , Root Canal Filling Materials/chemistry , Calcium Compounds/chemistry , Humans , Gutta-PerchaABSTRACT
BACKGROUND: This study aimed to assess the quality of various obturation techniques to fill perforation caused by internal root resorption using Micro-computed Tomography. METHODS: Cone-beam computed tomography images of a maxillary central incisor tooth with perforating internal resorptive defect were used to create a 3D printed model of the affected tooth. The replicas were divided into four groups based on the obturation technique used. The techniques included Group 1: a polydimethylsiloxane-based sealer (GuttaFlow-2) with gutta-percha. Group 2: same as Group 1 except for using a pre-mixed Bioceramic-based sealer (NeoSEALER Flo). Group 3: the defect was filled entirely using the NeoSealer Flo Bioceramic-based sealer. Group 4: the samples were obturated using the warm vertical compaction technique with a resin-based sealer (ADSeal). The resin models were then scanned a micro-computed scanner to evaluate the percentage of voids in each group. RESULTS: The results showed that NeoSEALER Flo groups had significantly the highest volume of voids while GuttaFlow-2 and warm vertical compaction groups had the lowest void volume. CONCLUSIONS: GuttaFlow-2 and warm vertical compaction techniques performed best in filling the internal resorptive defect.
Subject(s)
Cone-Beam Computed Tomography , Gutta-Percha , Root Canal Filling Materials , Root Canal Obturation , Root Resorption , X-Ray Microtomography , Root Canal Obturation/methods , X-Ray Microtomography/methods , Root Resorption/diagnostic imaging , Root Canal Filling Materials/therapeutic use , Humans , Gutta-Percha/therapeutic use , Cone-Beam Computed Tomography/methods , Dimethylpolysiloxanes , Incisor/diagnostic imaging , Drug Combinations , Printing, Three-DimensionalABSTRACT
BACKGROUND: This study evaluated the osseointegration potential of functionalised high-performance oxide ceramics (HPOC) in isolation or coated with BMP-2 or RGD peptides in 36 New Zeeland female rabbits using micro-computed tomography (micro CT). The primary outcomes of interest were to assess the amount of ossification evaluating the improvement in the bone volume/ total volume (BV/TV) ratio and trabecular thickness at 6 and 12 weeks. The second outcome of interest was to investigate possible differences in osteointegration between the functionalised silanised HPOC in isolation or coated with Bone Morphogenetic Protein 2 (BMP-2) or RGD peptides. METHODS: 36 adult female New Zealand white rabbits with a minimum weight of three kg were used. One-third of HPOCs were functionalised with silicon suboxide (SiOx), a third with BMP-2 (sHPOC-BMP2), and another third with RGD (sHPOC-RGD). All samples were scanned with a high-resolution micro CT (U-CTHR, MILabs B.V., Houten, The Netherlands) with a reconstructed voxel resolution of 10 µm. MicroCT scans were reconstructed in three planes and processed using Imalytics Preclinical version 2.1 (Gremse-IT GmbH, Aachen, Germany) software. The total volume (TV), bone volume (BV) and ratio BV/TV were calculated within the coating area. RESULTS: BV/TV increased significantly from 6 to 12 weeks in all HPOCs: silanised (P = 0.01), BMP-2 (P < 0.0001), and RGD (P < 0.0001) groups. At 12 weeks, the BMP-2 groups demonstrated greater ossification in the RGD (P < 0.0001) and silanised (P = 0.008) groups. Trabecular thickness increased significantly from 6 to 12 weeks (P < 0.0001). At 12 weeks, BMP-2 promoted greater trabecular thickness compared to the silanised group (P = 0.07), although no difference was found with the RGD (P = 0.1) group. CONCLUSION: Sinalised HPOC in isolation or functionalised with BMP-2 or RGD promotes in vivo osteointegration. The sinalised HOPC functionalised with BMP-2 demonstrated the greatest osseointegration.
Subject(s)
Bone Morphogenetic Protein 2 , Ceramics , Osseointegration , X-Ray Microtomography , Animals , Rabbits , X-Ray Microtomography/methods , Female , Osseointegration/physiology , Oxides , OligopeptidesABSTRACT
BACKGROUND: The purpose of this study was to assess the effects of systemically given krill oil (KO) on the development of new bone formation in the sutura palatina media following rapid maxillary expansion (RME). METHODS: 28 4-5 week-old male Wistar albino rats were randomly divided into 4 groups: Control (C), Only Expansion (OE) (no supplement but undergoing expansion and retention), KE (supplemented during both the expansion and retention phases), Krill Oil Nursery Group (KN) (supplemented during the 40-day nursery phase as well as during the expansion and retention phases). A 5-day RME was followed by a 12-day retention period. All rats were euthanized simultaneously. Micro-computerized tomography (Micro-CT), hemotoxylen-eosin (H&E) staining, and immunohistochemical analysis were conducted. Kruskal-Wallis and Dunn tests with Bonferonni corrrection were applied (p < 0.05). RESULTS: Expansion and KO supplementation did not cause a statistically significant change in bone mineral density (BMD), bone volume fraction (BV/TV), spesific bone surface (BS/BV) and trabecular thickness (Tb.Th). While the expansion prosedure increased the trabecular seperation (Tb.Sp), KO supplemantation mitigated this effect. The KE group exhibited a statistically significantly increase in trabecular number (Tb.N) compared to the OE group. Although receptor activator of nuclear factor-kappa-Β ligand (RANKL)/osteoprotegerin (OPG) ratios did not show significant differences between groups, the KE and OE groups demonstrated the lowest and highest value, respectively. KE showed a reduced amount of tartrate-resistant acid phosphatase (TRAP) compared to the OE. CONCLUSION: KO positively affected the architecture of the new bone formed in the mid-palatal suture. In this rat model of RME, results support the idea that administering of KO during the expansion period or beginning before the RME procedure may reduce relapse and enhance bone formation within the mid-palatal suture.
Subject(s)
Euphausiacea , Osteogenesis , Palatal Expansion Technique , Rats, Wistar , X-Ray Microtomography , Animals , X-Ray Microtomography/methods , Male , Rats , Osteogenesis/drug effects , Bone Density/drug effects , Immunohistochemistry , Oils/pharmacology , Random Allocation , Palate/diagnostic imaging , Palate/pathology , Cranial Sutures/drug effects , Cranial Sutures/diagnostic imaging , Maxilla/diagnostic imaging , Maxilla/drug effectsABSTRACT
Quantitative analysis of vessel characteristics at the cellular scale is of great significance for understan-ding plant adaptation strategies to environment. The direct grinding combined with stereo-microscope imaging is one of the main approaches to examine the anatomical structure of xylem (conifer tracheid and hardwood vessel) wood structure, which inevitably damages xylem cells, hindering the accurate understanding of anatomical structures. In this study, we applied X-ray micro-computed tomography (µCT) and stereo-microscope technology to quantitatively measure the diameter and area of vessels of seven Canadian broadleaved tree species (Acer saccharum, Betula papyrifera, Fraxinus americana, Ostrya virginiana, Populus grandidentata, Quercus rubra, and Carya cordiformis). We fitted the results by linear model and tested the feasibility of µCT technology in quantifying the vessel size of broadleaved species. We found that the results of the two methods for measuring vessel size were highly similar (R2=0.98). The goodness of fit of the vessel diameter results measured by the two methods for the ring-porous wood species (C. cordiformis, R2=0.98; F. americana, R2=0.96; Q. rubra, R2=0.99) was higher than that of the diffuse-porous wood species (B. papyrifera, R2=0.88; O. virginiana, R2=0.73; A. saccharum, R2=0.68; P. grandiden-tata, R2=0.88). The goodness of fit of small vessels (diameter≤200 µm, R2=0.94) measured by the two methods was higher than that of large vessels (diameter>200 µm, R2=0.92). Thus, the µCT technique provided a new non-destructive detection method for quantifying xylem vessels of broadleaved tree species.
Subject(s)
Acer , Fraxinus , Populus , Quercus , Trees , X-Ray Microtomography , Xylem , X-Ray Microtomography/methods , BetulaABSTRACT
Background and Objectives: In teeth with open apices, performing single session apexification is a challenging treatment due to the difficulty in handling mineral trioxide aggregate (MTA). Minimally invasive approaches in dentistry have also influenced the cavity designs in endodontics. Until now, different techniques have not been investigated in addition to manual condensation during the process of placing MTA in traditional (TradACs) or conservative (ConsACs) endodontic access cavities. The aim of this in vitro study was to compare and evaluate the obturation quality of MTA apical plugs placed with different techniques in TradACs or ConsACs. Materials and Methods: Sixty upper central teeth were divided into two main groups based on cavity design, and then each main group was further divided into three subgroups according to MTA placement techniques (n = 10): TradAC-manual, TradAC-manual + indirect ultrasonic activation, TradAC-manual + XP-endo Shaper (XPS), ConsAC-manual, ConsAC-manual + indirect ultrasonic activation, and ConsAC-manual + XPS. Subsequently, the porosity percentages in the MTA apical plug were analyzed using micro-computed tomography. The statistical analysis was performed using the Kruskal-Wallis H test and Mann-Whitney U test. Statistical significance was set at p < 0.05. Results: There were differences in volume of porosity percentages (%) according to cavity designs and MTA application techniques (p < 0.05). Except for the XPS group, more porosity was observed in ConsACs compared to TradACs. In TradACs, the significantly lowest open and total porosity was observed in the manual, ultrasonic, and XPS techniques, respectively. In ConsACs, the significantly lowest porosity was observed in the manual, XPS, and ultrasonic techniques, respectively (p < 0.05). Conclusions: In MTA obturation, cavity designs and application techniques had an impact on the MTA porosity. Creating an apical plug in ConsACs may result in more porosity compared to TradACs, especially when manual or indirect ultrasonic activation is preferred. Opting for the manual technique alone may be considered sufficient for controlling porosity for both TradACs and ConsACs.
Subject(s)
Aluminum Compounds , Calcium Compounds , Drug Combinations , Oxides , Root Canal Filling Materials , Root Canal Obturation , Silicates , X-Ray Microtomography , Calcium Compounds/administration & dosage , Silicates/therapeutic use , Humans , X-Ray Microtomography/methods , Root Canal Obturation/methods , Root Canal Obturation/standards , Root Canal Filling Materials/therapeutic use , Root Canal Filling Materials/standards , In Vitro TechniquesABSTRACT
A comprehensive grasp of the myocardial micro-architecture is essential for understanding diverse heart functions. This study aimed to investigate three-dimensional (3D) cardiomyocyte arrangement in the laminar structure using X-ray phase-contrast microtomography. Using the ID-19 beamline at the European Synchrotron Radiation Facility, we imaged human left ventricular (LV) wall transparietal samples and reconstructed them with an isotropic voxel edge length of 3.5 µm. From the reconstructed volumes, we extracted different regions to analyze the orientation distribution of local cardiomyocyte aggregates, presenting findings in terms of helix and intrusion angles. In regions containing one sheetlet population, we observed cardiomyocyte aggregates running along the local LV wall's radial direction at the border of sheetlets, branching and merging into a complex network around connecting points of different sheetlets, and bending to accommodate vessel passages. In regions with two sheetlet populations, the helix angle of local cardiomyocyte aggregates experiences a nonmonotonic change, and some cardiomyocyte aggregates run along the local radial direction. X-ray phase-contrast microtomography is a valuable technique for investigating the 3D local myocardial architecture at microscopic level. The arrangement of local cardiomyocyte aggregates in the LV wall proves to be both regional and complex, intricately linked to the local laminar structure.
Subject(s)
Heart Ventricles , Imaging, Three-Dimensional , Myocytes, Cardiac , X-Ray Microtomography , X-Ray Microtomography/methods , Humans , Myocytes, Cardiac/cytology , Imaging, Three-Dimensional/methods , Heart Ventricles/diagnostic imaging , Myocardium/cytologyABSTRACT
Recent advances in wood treatment include the use of eco-friendly coatings to improve the wood's dimensional stability and appearance. Assessing coating performance during its service life is critical for establishing a knowledge base for product optimization. Numerous approaches, including microimaging, are available for analyzing coating behavior. In addition to conventional microscopic techniques, high-resolution X-ray microtomography is a tool that provides nondestructive imaging of coatings and their substrates. In this study, we performed two-dimensional (2D) and three-dimensional (3D) visualization of tomographic reconstruction images of two coating types, spray and brush, to observe and assess the distribution of several commercial Japanese coating materials in Fagus crenata. X-ray images and plot profiles were used to determine the penetration depths and thicknesses of coatings. Each coated sample was scanned using X-ray microtomography, which allowed successful visualization and quantification of the coating penetration depth. Chemical content and concentration of the coating materials influenced penetration depth and amount.