High-Pressure Pasteurization of Oat Okara.

The issue of the short microbiological shelf life of residues from the plant-based beverage industry creates a large food waste problem. Today, the oat beverage residue, in this study referred to as oat okara, is generally converted to energy or used as animal feed. High-pressure pasteurization (200 MPa, 400 MPa, and 600 MPa) was applied to oat okara to investigate the effect on shelf life and microbiological activity. A 4-week microbiological storage study was performed and thermal properties, viscosity, and water and oil holding capacities were analyzed. The total aerobic count, including yeast and mold, was significantly reduced (p < 0.05) by 600 MPa after four weeks of storage at 4 °C. The content of lactic acid bacteria after four weeks of storage was low for untreated oat okara (3.2 log CFU/g) but, for 600 MPa, the content remained at the detection limit (2.3 log CFU/g). Conversely, the treatments of 200 MPa and 400 MPa increased the microbial content of the total aerobic count significantly (p < 0.05) after two weeks in comparison to untreated oat okara. The thermal properties of untreated and high-pressure-treated oat okara demonstrated an increase in protein denaturation of the 12S globulin, avenalin, when higher pressure was applied (400-600 MPa). This was also confirmed in the viscosity measurements where a viscosity peak for avenalin was only present for untreated and 200 MPa treated oat okara. The water holding capacity did not change as a function of high-pressure treatment (3.5-3.8 mL/g) except for the treatment at 200 MPa, which was reduced (2.7 mL/g). The oil holding capacity was constant (1.2-1.3 mL/g) after all treatments. High-pressure pasteurization of 600 MPa reduced the microbial content in oat okara resulting in a shelf life of 2-4 weeks. However, more research is required to identify the microorganisms in oat okara to achieve a microbiologically safe product that can be used for food applications.

High-Pressure Pasteurization of Soy Okara.

Okara is a by-product from the production of soy beverages, which has a high content of protein and fiber. Even though it has a high nutritional value, it is generally discarded or used as animal feed or compost. The problem is its short shelf life due to its high water content and high water activity. The aim of this study was to investigate the effect of high-pressure pasteurization at 200 MPa, 400 MPa, and 600 MPa on the shelf life of soy okara. Microbiological growth, as well as thermal properties, viscosity, water holding capacity, and oil holding capacity, was evaluated after the pressure treatments. Treatment at 600 MPa significantly reduced (p < 0.05) the growth of total aerobic count, yeast and mold, and lactic acid bacteria for up to four weeks of storage at 4 °C. The pasting properties were increased while the water and oil holding capacities of the soy okara did not significantly change (p > 0.05) after high-pressure pasteurization at 400 MPa and 600 MPa. High-pressure pasteurization is therefore a potential application technique for soy okara to produce a microbiologically safe product with maintained functional properties. However, more research is needed to optimize the process and to further investigate the microbiological species present in untreated soy okara to exclude any potential food safety risks.

Use of oyster mushrooms (Pleurotus ostreatus) for increased circularity and valorization of rapeseed residues.

In Europe, rapeseed is a common oilseed crop, resulting in the production of 20 million tons of rapeseed press cake yearly. This press cake can be further upcycled and a protein fraction can be extracted for food purposes, leaving de-proteinized fiber-rich residues. This study examined the use of these residues in the production of oyster mushrooms (Pleurotus ostreatus) and of the spent substrate as feed, since mushroom cultivation may improve the feed properties of substrate. In terms of mushroom production, the addition of rapeseed press residues was beneficial, giving significantly higher biological efficiency (BE = 93.1 ± 11.0%) compared with the control, sugar beet pulp substrate (70.0 ± 6.6%). This increase in productivity can most likely be explained by higher energy content in the substrate supplemented with lipid-rich rapeseed residues. Despite differences in BE between the substrates, high similarity was observed in lipid composition of the fruiting bodies (lipid profile dominated by linoleic acid (18:2), palmitic acid (16:0), and oleic acid (18:1)), and in protein and moisture content. After mushroom harvest, approximately 70% of the initial dry weight of both substrates remained as a possible feed source. Both substrates had significantly lower levels of carbohydrates and unchanged neutral detergent fiber content after mushroom harvest, and both gave lower in vitro digestibility, total gas production, and methane production. However, protein concentration differed between the substrates, with the highest concentration (15.8% of dry weight) found in spent substrate containing rapeseed press residues. The result of the present study suggests that the de-proteinized rapeseed press residue is a resource well-suited for use in the production of mushrooms and feed.

Effects of Concentration and Type of Lipids on the Droplet Size, Encapsulation, Colour and Viscosity in the Oil-in-Water Emulsions Stabilised by Rapeseed Protein.

The objective of this study was to extract the rapeseed protein from by-products and further examine the effect of lab-made rapeseed protein on the droplet size, microstructure, colour, encapsulation and apparent viscosity of emulsions. Rapeseed protein-stabilised emulsions with an increasing gradient of milk fat or rapeseed oil (10, 20, 30, 40 and 50%, v/v) were fabricated using a high shear rate homogenisation. All emulsions showed 100% oil encapsulation for 30 days of storage, irrespective of lipid type and the concentration used. Rapeseed oil emulsions were stable against coalescence, whereas the milk fat emulsion showed a partial micro-coalescence. The apparent viscosity of emulsions raised with increased lipid concentrations. Each of the emulsions showed a shear thinning behaviour, a typical behaviour of non-Newtonian fluids. The average droplet size was raised in milk fat and rapeseed oil emulsions when the concentration of lipids increased. A simple approach to manufacturing stable emulsions offers a feasible hint to convert protein-rich by-products into a valuable carrier of saturated or unsaturated lipids for the design of foods with a targeted lipid profile.

Plant-Based Meat Analogues from Alternative Protein: A Systematic Literature Review.

This study aimed to conduct a systematic literature review (SLR) of the research performed in the plant-based meat analogues area. Historical, current, and future tendencies are discussed. The paper offers a comprehensive SLR coupled with a bibliometric analysis of the publication from 1972 to January 2022. The articles were obtained using a research string and precise inclusion and exclusion criteria from two prominent databases, Scopus and Web of Science (WoS). The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) flow technique was used to describe the data screening and selection. In total, 84 publications were selected for further analysis after a thorough literature assessment. From this study, six main themes were identified: (1) objectives of the study; (2) type of plant protein; (3) product type; (4) added ingredients; (5) texturization technique; and (6) quality assessment considered in the studies. Recent trends in publication imply that meat analogue technology is gaining prominence. This review revealed significant research on improving meat analogues via texturization. Even though extrusion is used industrially, the technique is still in its infancy and needs improvement. Future studies should focus more on fiber and protein-protein interactions, macromolecule conformation and mechanisms, diversifying or improving current methods, sensory attributes, and gastrointestinal absorption rate of each novel protein ingredient.

The Effect of Precipitation pH on Protein Recovery Yield and Emulsifying Properties in the Extraction of Protein from Cold-Pressed Rapeseed Press Cake.

Rapeseed is the second most cultivated oilseed after soybean and is mainly used to produce vegetable oil. The by-product rapeseed press cake is rich in high-quality proteins, thus having the possibility of becoming a new plant protein food source. This study aimed to investigate how the precipitation pH affects the protein yield, protein content, and emulsifying properties when industrially cold-pressed rapeseed press cake is used as the starting material. Proteins were extracted under alkaline conditions (pH 10.5) with an extraction coefficient of 52 ± 2% followed by precipitation at various pH (3.0-6.5). The most preferred condition in terms of process efficiency was pH 4.0, which is reflected in the zeta potential results, where the proteins' net charge was 0 at pH 4.2. pH 4.0 also exhibited the highest protein recovery yield (33 ± 0%) and the highest protein concentration (64 ± 1%, dry basis). Proteins precipitated at pH 6.0-6.5 stabilized emulsions with the smallest initial droplet size, although emulsions stabilized by rapeseed protein precipitated at pH 5.0-6.0 showed the highest emulsion stability at 37 °C for 21 days, with a limited layer of free oil. Overall, emulsion stabilized by protein precipitated at pH 5.0 was the most stable formulation, with no layer of free oil after 21 days of incubation.

Development and Characterization of Extrudates Based on Rapeseed and Pea Protein Blends Using High-Moisture Extrusion Cooking.

Rapeseed protein is not currently utilized for food applications, although it has excellent physicochemical, functional, and nutritional properties similar to soy protein. Thus, the goal of this study was to create new plant-based extrudates for application as high-moisture meat analogs from a 50:50 blend of rapeseed protein concentrate (RPC) and yellow pea isolate (YPI) using high-moisture-extrusion (HME) cooking with a twin-screw extruder to gain a better understanding of the properties of the protein powders and resulting extrudates. The effects of extrusion processing parameters such as moisture content (60%, 63%, 65%, 70%), screw speed (500, 700, and 900 rpm), and a barrel temperature profile of 40-80-130-150 °C on the extrudates' characteristics were studied. When compared to the effect of varying screw speeds, targeted moisture content had a larger impact on textural characteristics. The extrudates had a greater hardness at the same moisture content when the screw speed was reduced. The specific mechanical energy (SME) increased as the screw speed increased, while increased moisture content resulted in a small reduction in SME. The lightness (L*) of most samples was found to increase as the target moisture content increased from 60% to 70%. The RPC:YPI blend was equivalent to proteins produced from other sources and comparable to the FAO/WHO standard requirements.

The Application of Pulse Flours in the Development of Plant-Based Cheese Analogues: Proximate Composition, Color, and Texture Properties.

Despite the many benefits of pulses, their consumption is still very low in many Western countries. One approach to solving this issue is to develop attractive pulse-based foods, e.g., plant-based cheeses. This study aimed to assess the suitability of different types of pulse flour, from boiled and roasted yellow peas and faba beans, to develop plant-based cheese analogues. Different stabilizer combinations (kappa- and iota-carrageenan, kappa-carrageenan, and xanthan gum) were tested. The results showed that firm and sliceable pulse-based cheese analogues could be prepared using all types of pulse flour using a flour-to-water ratio of 1:4 with the addition of 1% (w/w) kappa-carrageenan. The hardness levels of the developed pulse-based cheese analogues were higher (1883-2903 g, p < 0.01) than the reference Gouda cheese (1636 g) but lower than the commercial vegan cheese analogue (5787 g, p < 0.01). Furthermore, the crude protein (4-6% wb) and total dietary fiber (6-8% wb) contents in the developed pulse-based cheese analogues were significantly (p < 0.01) higher than in the commercial vegan cheese analogue, whereas the fat contents were lower. In conclusion, flours from boiled and roasted yellow peas and faba beans have been shown to be suitable as raw materials for developing cheese analogues with nutritional benefits.

The Effect of pH and Storage Temperature on the Stability of Emulsions Stabilized by Rapeseed Proteins.

Rapeseed press cake (RPC), the by-product of rapeseed oil production, contains proteins with emulsifying properties, which can be used in food applications. Proteins from industrially produced RPC were extracted at pH 10.5 and precipitated at pH 3 (RPP3) and 6.5 (RPP6.5). Emulsions were formulated at three different pHs (pH 3, 4.5, and 6) with soy lecithin as control, and were stored for six months at either 4 °C or 30 °C. Zeta potential and droplet size distribution were analyzed prior to incubation, and emulsion stability was assessed over time by a Turbiscan instrument. Soy lecithin had significantly larger zeta potential (-49 mV to 66 mV) than rapeseed protein (-19 mV to 20 mV). Rapeseed protein stabilized emulsions with smaller droplets at pH close to neutral, whereas soy lecithin was more efficient at lower pHs. Emulsions stabilized by rapeseed protein had higher stability during storage compared to emulsions prepared by soy lecithin. Precipitation pH during the protein extraction process had a strong impact on the emulsion stability. RPP3 stabilized emulsions with higher stability in pHs close to neutral, whereas the opposite was found for RPP6.5, which stabilized more stable emulsions in acidic conditions. Rapeseed proteins recovered from cold-pressed RPC could be a suitable natural emulsifier and precipitation pH can be used to monitor the stability in emulsions with different pHs.

High-Moisture Meat Analogues Produced from Yellow Pea and Faba Bean Protein Isolates/Concentrate: Effect of Raw Material Composition and Extrusion Parameters on Texture Properties.

Yellow pea and faba bean are potential candidates to replace soybean-based ingredients due to their suitability for cultivation in the northern hemisphere, non-genetically modified organisms cultivation practice and low risk of allergenicity. This study examined the functionality of local yellow pea and faba bean protein isolates/concentrate as meat analogue products. The most critical factors affecting the texture properties of meat analogue were also determined. Extrusion was used to produce high-moisture meat analogues (HMMAs) from yellow pea and faba bean protein isolates/concentrates and HMMAs with fibrous layered structures was successfully produced from both imported commercial and local sources. The texture properties of the HMMA produced were mainly affected by the ash, fiber and protein content and water-holding capacity of the source protein. Three extrusion process parameters (target moisture content, extrusion temperature, screw speed), also significantly affected HMMA texture. In conclusion, functional HMMA can be produced using protein isolates derived from locally grown pulses.

Changes in Intestinal Permeability Ex Vivo and Immune Cell Activation by Three Commonly Used Emulsifiers.

Food additives such as emulsifiers are used in increasing quantities in the food industry. The aim of this study was to compare three different emulsifiers (polysorbate 80 (P80), carboxymethyl cellulose (CMC), and ß-lactoglobulin (ß-lac) with regards to their effect on the stimulation of immune cells and intestinal permeability. The immune stimulatory effects were studied in the myeloid cell line MUTZ-3-cells, while the change in intestinal permeability was studied in the Caco-2 cell line and ex vivo in the Ussing chamber system using small intestinal fragments from rats. The tested concentrations of the emulsifiers ranged from 0.02% up to 1%, which are concentrations commonly used in the food industry. The results showed that P80 affected both the myeloid cells and the intestinal permeability more than CMC (p < 0.05) and ß-lac (p < 0.05) at the highest concentration. CMC was found to neither affect the permeability in the intestine nor the MUTZ-3 cells, while ß-lac changed the permeability in the total part of the small intestine in rats. These findings indicate that P80 might be more cytotoxic compared to the other two emulsifiers.

Development of High-Moisture Meat Analogues with Hemp and Soy Protein Using Extrusion Cooking.

The interest in plant-based products is growing in Western countries, mostly due to health and environmental issues that arise from the consumption and production of animal-based food products. Many vegan products today are made from soy, but drawbacks include the challenges of cultivating soy in colder climates such as northern Europe. Therefore, the present study investigates whether industrial hemp (Cannabis sativa) could substitute soy in the production of high moisture meat analogues (HMMA). A twin screw co-rotating extruder was used to investigate to what extent hemp protein concentrate (HPC) could replace soy protein isolate (SPI) in HMMAs. The substitution levels of HPC were 20 wt%, 40 wt% and 60 wt%. Pasting properties and melting temperature of the protein powders were characterized by Rapid Visco Analyzer (RVA) and Differential Scanning Calorimeter (DSC), respectively and the produced HMMA was analysed by determining the texture and colour attributes. The results showed that it is possible to extrude a mixture with up to 60% HPC. HPC absorbed less water and needed a higher denaturing temperature compared to SPI. Increasing the moisture content by 5% would have resulted in a reduction of hardness and chewiness. The lightness (L* value) was found to be significantly higher in SPI product and decreased in the mixture with higher HPC (p < 0.05).

Emulsifying and Anti-Oxidative Properties of Proteins Extracted from Industrially Cold-Pressed Rapeseed Press-Cake.

One of the functional proteins in rapeseed-the amphiphilic protein oleosin-could be used to stabilize emulsions. The objectives of this study were to extract oleosins from cold-pressed rapeseed press-cake, optimize the extraction process, and investigate their emulsifying and anti-oxidative capacity. The proteins were recovered from industrially cold-pressed rapeseed press-cake at different alkali pHs. Emulsifying properties and oxidation rates were assessed. Oleosin extracted at pH 9 stabilized smaller emulsion droplets than oleosin extracted at pH 12, although the protein yield was higher at pH 12. Emulsions were formulated from flaxseed oil and corn oil and were stabilized by oleosin, bovine serum albumin, de-oiled lecithin and Tween 20,h and the emulsions were stored in accelerated conditions (30 °C) for 12 days. Oleosin stabilized emulsions to the same extent as commercial food-grade emulsifiers. Flaxseed oil emulsions stabilized by oleosin had a significantly lower concentration of malondialdehyde (MDA) which indicates a lower oxidation rate compared to BSA, de-oiled lecithin and Tween 20. For corn oil emulsions, oleosin and BSA had a similar capacity to delay oxidation and were significantly more efficient compared to de-oiled lecithin and Tween 20. Rapeseed oleosin recovered from cold-pressed rapeseed press-cake could be a suitable natural emulsifier with anti-oxidation properties.

Effects of Storage Conditions on Degradation of Chlorophyll and Emulsifying Capacity of Thylakoid Powders Produced by Different Drying Methods.

Thylakoid membranes isolated from spinach have previously been shown to inhibit lipase/co-lipase and prolong satiety in vivo. There is a need to develop thylakoid products that not only have the desired characteristics and functionality after processing, but also are stable and provide equivalent effect on appetite over the promised shelf life. The aim of the present study was therefore to evaluate how the thylakoid powders' characteristics and functionality were affected by moisture during storage. Thylakoids produced by drum-drying, spray-drying, and freeze-drying were incubated in controlled atmosphere with different relative humidity (10 RH%, 32 RH%, 48 RH% and 61 RH%) for 8 months. The water content in all powders was increased during storage. The water absorption was moisture-dependent, and the powders were considered hygroscopic. Relative humidity showed a definite influence on the rate of chlorophyll degradation and loss of green color in thylakoid powders after storage which correlated with impaired emulsifying capacity. Spray-dried powder had the overall highest chlorophyll content and emulsifying capacity at all RH-levels investigated. Spray drying was therefore considered the most suitable drying method yielding a powder with best-maintained functionality after storage. The results can be applied towards quality control of high-quality functional foods with appetite suppressing abilities.

Protein Recovery from Rapeseed Press Cake: Varietal and Processing Condition Effects on Yield, Emulsifying Capacity and Antioxidant Activity of the Protein Rich Extract.

Protein was recovered from five varieties and a mixed blend of cold-pressed rapeseed press cake by leaching and precipitation in a water-based process, and the protein recovery yield varied from 26-41% depending on variety. Exposure for heat during protein recovery severely reduced the rapeseed proteins' ability to stabilize the oil-water interface of emulsion droplets. Protein extract from Lyside had the best emulsifying properties of the varieties investigated. Oxidation rate was assessed by the Thiobarbituric Acid Reactive Substances (TBARS) method and rapeseed protein extracts from Epure and Festivo had higher capacity to delay oxidation compared with soy lecithin. There are possibilities to broaden the use of rapeseed whereby recovered rapeseed protein can be used as a plant-based multifunctional ingredient with emulsifying capacity and which has a delaying effect on oxidation.

The Effects of Oil Extraction Methods on Recovery Yield and Emulsifying Properties of Proteins from Rapeseed Meal and Press Cake.

The agricultural sector is thought to be responsible for around 30% of the anthropogenic climate change and it is well established that high meat consumption has a tremendous impact on the environment. Rapeseed is mainly used for production of vegetable oil, but press cake has high protein content with the potential for incorporation into new plant protein-based foods. Protein was recovered from press cakes generated from different oil pressing processes. Industrially cold-pressed, hot-pressed, and solvent-extracted rapeseed press cake and the effect of heat treatment in the recovery process was assessed. Protein recovery yield, protein concentration and emulsifying properties were analyzed. Cold-pressed rapeseed press cake (RPC) recovered in the absence of heat, yielded the highest protein recovery (45%) followed by hot-pressed rapeseed meal (RM) (26%) and solvent-extracted RM (5%). Exposure to heat during recovery significantly reduced the yield for cold-pressed RPC but no difference was found for hot-pressed RM. The protein recovery yield was improved for solvent-extracted RM when heat was applied in the recovery process. The ability to stabilize emulsions was highest for protein recovered from cold-pressed RPC, followed by hot-pressed RM and solvent-extracted RM, and was in the same range as commercial emulsifying agents. Heat treatment during recovery significantly reduced the emulsifying properties for all pressing methods examined. This study suggests that cold-pressed rapeseed press cake without heat in the recovery process could be a successful strategy for an efficient recovery of rapeseed protein with good emulsifying properties.

Characteristics and functionality of appetite-reducing thylakoid powders produced by three different drying processes.

BACKGROUND: Thylakoids, a chloroplast membrane extracted from green leaves, are a promising functional ingredient with appetite-reducing properties via their lipase-inhibiting effect. Thylakoids in powder form have been evaluated in animal and human models, but no comprehensive study has been conducted on powder characteristics. The aim was to investigate the effects of different isolation methods and drying techniques (drum-drying, spray-drying, freeze-drying) on thylakoids' physicochemical and functional properties. RESULTS: Freeze-drying yielded thylakoid powders with the highest lipase-inhibiting capacity. We hypothesize that the specific macromolecular structures involved in lipase inhibition were degraded to different degrees by exposure to heat during spray-drying and drum-drying. We identified lightness (Hunter's L-value), greenness (Hunter's a-value), chlorophyll content and emulsifying capacity to be correlated to lipase-inhibiting capacity. Thus, to optimize the thylakoids functional properties, the internal membrane structure indicated by retained green colour should be preserved. This opens possibilities to use chlorophyll content as a marker for thylakoid functionality in screening processes during process optimization. CONCLUSION: Thylakoids are heat sensitive, and a mild drying technique should be used in industrial production. Strong links between physicochemical parameters and lipase inhibition capacity were found that can be used to predict functionality. The approach from this study can be applied towards production of standardized high-quality functional food ingredients. © 2017 Society of Chemical Industry.

Heat-induced aggregation of thylakoid membranes affect their interfacial properties.

Many of our most popular lipid containing foods are in emulsion form. These foods are often highly palatable with high caloric density, that subsequently increases the risk of overconsumption and possibly lead to obesity. Regulating the lipid bioavailability of high-fat foods is one approach to prevent overconsumption. Thylakoids, the chloroplast membrane, creates a barrier around lipid droplets, which prolong lipolysis and increase satiety as demonstrated both in animal and human studies. However, a reduced lipase inhibiting capacity has been reported after heat treatment but the mechanism has not yet been fully established. The aim of this study was to investigate thylakoids' emulsifying properties post heat-treatment and possible links to alterations in lipase inhibiting capacity and chlorophyll degradation. Heat-treatment of thylakoids at either 60 °C, 75 °C or 90 °C for time interval ranging from 15 s to 4 min reduced ability to stabilise emulsions, having increased lipid droplets sizes, reduced emulsification capacity, and elevated surface load as consequence. Emulsifying properties were also found to display a linear relationship to both chlorophyll and lipase inhibiting capacity. The correlations support the hypothesis that heat-treatment induce chlorophyll degradation which promote aggregation within proteins inside the thylakoid membrane known to play a decisive role in interfacial processes. Therefore, heat-treatment of thylakoids affects both chlorophyll content, lipase inhibiting capacity and ability to stabilise the oil-water interface. Since the thylakoid's appetite reducing properties are a surface-related phenomenon, the results are useful to optimize the effect of thylakoids as an appetite reducing agent.

The effect of heat treatment of thylakoids on their ability to inhibit in vitro lipase/co-lipase activity.

Thylakoids has been shown to prolong lipolysis by the inhibition of lipase/co-lipase, which makes thylakoids suitable as a functional food ingredient with satiating properties. The components of thylakoids that provide its function as a lipolysis modulator are primarily photosystems I and II, which are structurally stabilised by chlorophyll. However, chlorophyll is known to be heat sensitive yet the enzymatic inhibiting capacity after heat treatment has not been previously studied. It was hypothesised that the retained function of thylakoids after heat treatment could be correlated to the degree of degradation. Heat treatment at either 60 °C, 75 °C or 90 °C for time interval ranging from 15 s to 120 min induced a color shift from bright green to olive brown which was attributed to degradation. The ability of heat-treated thylakoids to inhibit lipolysis in vitro was also reduced. A correlation between chlorophyll a degradation and the enzymatic inhibiting capacity could be established which opens possibilities to use a spectrophotometric method to quantify the ability of thylakoids to inhibit lipase/co-lipase in a more rapid and cost effective way to complement the pH-stat method used today. With the degradation pattern investigated, it is then possible to design a thermal treatment process to ensure a microbiological safe appetite-reducing product and at the same time minimize the loss of functionality.

Supplementation by thylakoids to a high carbohydrate meal decreases feelings of hunger, elevates CCK levels and prevents postprandial hypoglycaemia in overweight women.

Thylakoids are chlorophyll-containing membranes in chloroplasts that have been isolated from green leaves. It has been previously shown that thylakoids supplemented with a high-fat meal can affect cholecystokinin (CCK), ghrelin, insulin and blood lipids in humans, and can act to suppress food intake and prevent body weight gain in rodents. This study investigates the addition of thylakoids to a high carbohydrate meal and its effects upon hunger motivation and fullness, and the levels of glucose, insulin, CCK, ghrelin and tumour necrosis factor (TNF)-alpha in overweight women. Twenty moderately overweight female subjects received test meals on three different occasions; two thylakoid enriched and one control, separated by 1 week. The test meals consisted of a high carbohydrate Swedish breakfast, with or without addition of thylakoids. Blood samples and VAS-questionnaires were evaluated over a 4-h period. Addition of thylakoids suppressed hunger motivation and increased secretion of CCK from 180 min, and prevented postprandial hypoglycaemia from 90 min following food intake. These effects indicate that thylakoids may intensify signals of satiety. This study therefore suggests that the dietary addition of thylakoids could aid efforts to reduce food intake and prevent compensational eating later in the day, which may help to reduce body weight over time.