Photonic sintering of copper for rapid processing of thick film conducting circuits on FTO coated glass.

Copper potentially provides a cost-effective replacement for silver in printed electronic circuitry with diverse applications in healthcare, solar energy, IOT devices and automotive applications. The primary challenge facing copper is that it readily oxidizes to its non-conductive state during the sintering process. Photonic sintering offers a means of overcoming the oxidation by which rapid conversion from discrete nano-micro particles to fully or partially sintered products occurs. An experimental study of flash lamp sintering of mixed nano copper and mixed nano/ micro copper thick film screen printed structures on FTO coated glass was carried out. It shows that there may be multiple energy windows which can successfully sinter the thick film copper print preventing detrimental copper oxidation. Under optimum conditions, the conductivities achieved in under 1 s was (3.11-4.3 × 10-7 Ω m) matched those achieved in 90 min at 250 °C under reducing gas conditions, offering a significant improvement in productivity and reduced energy demand. Also present a good film stability of a 14% increase in line resistance of 100 N material, around 10% for the 50N50M ink and only around 2% for the 20N80M.

Full Embroidery Designed Electro-Textile Wearable Tag Antenna for WBAN Application.

A flexible and totally wearable textile antenna is proposed by embroidering the conductive threads into garments. A purely polyester substrate has been utilized, which provides a tag that can be easily integrated with the clothes. The proposed tag antenna is small with dimensions of 72 × 20 × 2.75 mm3 and offers an enhanced performance in terms of gain and stability when worn on different body locations. Experimental results demonstrate an improved impedance matching owing to the elasticity of the E-shaped inductive feeder. Close agreement has been achieved between the simulated and measured results.

Hepatitis C virus treatment by direct-acting antivirals in successfully treated hepatocellular carcinoma and possible mutual impact.

BACKGROUND AND AIMS: Treatment of hepatitis C virus (HCV) after successfully treated hepatocellular carcinoma (HCC) becomes possible with the introduction of direct-acting antivirals because of their favorable efficacy, safety, and short period of treatment. Few data are available on the results of treatment using different direct-acting antiviral regimens in successfully treated HCC and a lot of debate about its role in tumor recurrence. METHODS: Sixty-two HCV-related HCC patients were enrolled in the study after successfully treated HCC; the studied population included either Child-Pugh 'A' or 'B7'. The patients were subcategorized to receive one of the following regimens: group 1: sofosbuvir (SOF)+ribavirin (RBV) for 24 weeks, group 2: SOF+simeprevir for 12 weeks, group 3: SOF+daclatasvir for 24 weeks, and group 4: SOF+daclatasvir+RBV for 12 weeks. The overall median follow-up period is 12 months after treatment initiation. RESULTS: All treatment regimens were tolerable for all patients, with no reported major adverse events during treatment. The overall sustained virologic response rate was 64.5%, with the highest result in group 4 and the lowest result in group 1; 87.5 and 26.7%, respectively. HCC recurrence was observed in 42% of patients; 80.7% of these patients developed recurrence within 6 months of treatment initiation. CONCLUSION: Treatment of HCV in successfully treated HCC is feasible, with the best results achieved using multiple direct-acting antivirals and RBV; a high rate of HCC recurrence was observed, especially within the first 6 months of treatment initiation (ClinicalTrials.gov no: NCT02771405).

Novel scores combining AFP with non-invasive markers for prediction of liver fibrosis in chronic hepatitis C patients.

Serum levels of alpha-fetoprotein (AFP) were reported to increase in patients with significant or advanced hepatic fibrosis. Combination of non-invasive tests decreases the use of liver biopsy in large proportion of chronic HCV patients. The aim of the study was to compare and combine AFP with commonly used non-invasive fibrosis tests in novel scores for prediction of different stages of hepatic fibrosis. Six hundred and fifty two treatment naïve chronic hepatitis C patients were enrolled. Demographic data, basic pre-treatment laboratory tests including complete blood count (CBC), liver biochemical profile and renal functions test, international normalized ratio (INR) in addition to AFP, liver stiffness measurement (LSM) by Fibroscan and liver biopsies were retrospectively analyzed. AST to Platelet Ratio Index (APRI) and FIB-4 scores were calculated. Different predictive models using multivariate logistic regression analysis were generated and presented in equations (scores) composed of a combination of AFP, LSM plus FIB-4/APRI scores. AFP was correlating significantly with LSM, FIB-4, and APRI scores. Areas under receiver operating characteristic curves (AUROCs) for predicting significant hepatic fibrosis, advanced hepatic fibrosis, and cirrhosis were 0.897, 0.931, and 0.955, respectively, for equations (scores) containing AFP, LSM, and FIB-4. AUROCs for predicting significant hepatic fibrosis, advanced hepatic fibrosis and cirrhosis were 0.897, 0.929, and 0.959, respectively, for equations (scores) containing AFP, LSM, and APRI. The study shows that combining AFP to serum biomarkers and LSM increases their diagnostic performance for prediction of different stages of liver fibrosis.

Asian-Pacific Association for the Study of the Liver (APASL) consensus guidelines on invasive and non-invasive assessment of hepatic fibrosis: a 2016 update.

Hepatic fibrosis is a common pathway leading to liver cirrhosis, which is the end result of any injury to the liver. Accurate assessment of the degree of fibrosis is important clinically, especially when treatments aimed at reversing fibrosis are being evolved. Despite the fact that liver biopsy (LB) has been considered the "gold standard" of assessment of hepatic fibrosis, LB is not favored by patients or physicians owing to its invasiveness, limitations, sampling errors, etc. Therefore, many alternative approaches to assess liver fibrosis are gaining more popularity and have assumed great importance, and many data on such approaches are being generated. The Asian Pacific Association for the Study of the Liver (APASL) set up a working party on liver fibrosis in 2007, with a mandate to develop consensus guidelines on various aspects of liver fibrosis relevant to disease patterns and clinical practice in the Asia-Pacific region. The first consensus guidelines of the APASL recommendations on hepatic fibrosis were published in 2009. Due to advances in the field, we present herein the APASL 2016 updated version on invasive and non-invasive assessment of hepatic fibrosis. The process for the development of these consensus guidelines involved review of all available published literature by a core group of experts who subsequently proposed consensus statements followed by discussion of the contentious issues and unanimous approval of the consensus statements. The Oxford System of the evidence-based approach was adopted for developing the consensus statements using the level of evidence from one (highest) to five (lowest) and grade of recommendation from A (strongest) to D (weakest). The topics covered in the guidelines include invasive methods (LB and hepatic venous pressure gradient measurements), blood tests, conventional radiological methods, elastography techniques and cost-effectiveness of hepatic fibrosis assessment methods, in addition to fibrosis assessment in special and rare situations.