Characterization and comparison of smokeless powders by on-line two-dimensional liquid chromatography.

Smokeless powders (SPs) are one of the most commonly used propellants for ammunition but can also be abused as energetic material in improvised explosive devices (IEDs) such as pipe bombs. After a shooting or explosion, unburnt or partially burnt particulates may be observed which can be used for forensic investigation. SPs comprise mainly nitrocellulose (NC) and additives. Therefore, the characterization of both NC and the additives is of significant forensic importance. Typically, the identification, classification, and chemical profiling of smokeless powders are based exclusively on the analysis of the additives. In this study, information regarding the NC base component was combined with the chemical analysis of the additives using two-dimensional liquid chromatography (2D-LC). The system combines size-exclusion chromatography (SEC) and reversed-phase liquid chromatography (RPLC) in an on-line heart-cut 2D-LC configuration. In the first dimension, the NC is characterized by its molecular-weight distribution (MWD) while being separated from the additives. The additives are then transferred to the second-dimension separation using a novel analyte-transfer system. In the second dimension, the additives are separated to obtain a detailed profile of the low-molecular-mass compounds in the SP. With this approach, the MWD of the NC and the composition of the additives in SP have been obtained within an hour. A discrimination power of 90.53% was obtained when studying exclusively the NC MWD, and 99.47% for the additive profile. This novel combination enables detailed forensic comparison of intact SPs. Additionally, no extensive sample preparation is required, making the developed method less labor intensive.

Fabrication of monolithic frits and columns for chip-based multidimensional separation devices.

In this work, devices for two-dimensional separations are considered. The device contains a flow distributor, a first-dimension channel, and 17 second-dimension outlets. In the design, all connections between the first-dimension channel, the flow distributor, and the second-dimension outlets were tapered, with a minimal diameter of 20 µm. The use of photo-masking is explored for the fabrication of monolithic frits in all tapered connections. Monolithic frits with optimized permeability and length were successfully fabricated in all 33 tapered channels through light-induced polymerization, photo-masking, and selective exposure. The efficacy of the monolithic frits was demonstrated by creating a packed bed of 15-µm particles, confined within the first-dimension channel. The outlet of the first-dimension channel was successfully connected to a mass spectrometer. Effective flow confinement was demonstrated with a reversed-phase separation of a mixture of five standard peptides.

Latest Trends on the Future of Three-Dimensional Separations in Chromatography.

Separation and characterization of complex mixtures are of crucial importance in many fields, where extremely high separation power is required. Three-dimensional separation techniques can offer a path toward achieving high peak capacities. In this Review, online three-dimensional separation systems are discussed, including three-dimensional gas chromatography, and hyphenated combinations of two-dimensional gas chromatography with liquid chromatography or supercritical-fluid chromatography. Online comprehensive two-dimensional liquid chromatography provides detailed information on complex samples and the need for higher peak capacities is pushing researchers toward online three-dimensional liquid chromatography. In this review, an overview of the various combinations are provided and we discuss and compare their potential performance, advantages, perspectives, and results obtained during the most recent 10-15 years. Finally, the Review will discuss a novel approach of spatial three-dimensional liquid separation to increase peak capacity.

Fabrication of polymer monoliths within the confines of non-transparent 3D-printed polymer housings.

In the last decade, 3D-printing has emerged as a promising enabling technology in the field of analytical chemistry. Fused-deposition modelling (FDM) is a popular, low-cost and widely accessible technique. In this study, RPLC separations are achieved by in-situ fabrication of porous polymer monoliths, directly within the 3D-printed channels. Thermal polymerization was employed for the fabrication of monolithic columns in optically non-transparent column housings, 3D-printed using two different polypropylene materials. Both acrylate-based and polystyrene-based monoliths were created. Two approaches were used for monolith fabrication, viz. (i) in standard polypropylene (PP) a two-step process was developed, with a radical initiated wall-modification step 2,2'-azobis(2-methylpropionitrile) (AIBN) as the initiator, followed by a polymerization step to generate the monolith; (ii) for glass-reinforced PP (GPP) a silanization step or wall modification preceded the polymerization reaction. The success of wall attachment and the morphology of the monoliths were studied using scanning electron microscopy (SEM), and the permeability of the columns was studied in flow experiments. In both types of housings polystyrene-divinylbenzene (PS-DVB) monoliths were successfully fabricated with good wall attachment. Within the glass-reinforced polypropylene (GPP) printed housing, SEM pictures showed a radially homogenous monolithic structure. The feasibility of performing liquid-chromatographic separations in 3D-printed channels was demonstrated.

Analysis of charged acrylic particles by on-line comprehensive two-dimensional liquid chromatography and automated data-processing.

A thorough understanding of particle formation and polymer growth during emulsion polymerization is indispensable for the development of particles and products with very specific properties. This has created a demand for the detailed characterization of various properties and property distributions - and the relation between these. A method is described that enables comprehensive, simultaneous determination of the size distribution of nanoparticles and the molecular-weight distribution of the constituting polymers as a function of the particle size. The result is a complete two-dimensional distribution that details the interdependence of the two parameters. The approach comprehensively combines hydrodynamic chromatography with size-exclusion chromatography. An automated band-broadening filter has been developed to improve the accuracy of the measured distributions. The algorithm utilizes automated curve-fitting approaches to describe detected particle distributions for each horizontal slice of the 2D-LC chromatogram, and filters band broadening using calibration curves. The method has been applied to samples of complex nanoparticles comprising hydrophobic, hydrophilic and charged moieties, viz. stabilized dispersions of poly[(methyl methacrylate)-co-(butyl acrylate)-co-(methacrylic acid)]-nanoparticles in water. We consistently found that, within a single population of particles, the weight-average molecular weight increases with particle size.

Nanoparticle Analysis by Online Comprehensive Two-Dimensional Liquid Chromatography combining Hydrodynamic Chromatography and Size-Exclusion Chromatography with Intermediate Sample Transformation.

Polymeric nanoparticles have become indispensable in modern society with a wide array of applications ranging from waterborne coatings to drug-carrier-delivery systems. While a large range of techniques exist to determine a multitude of properties of these particles, relating physicochemical properties of the particle to the chemical structure of the intrinsic polymers is still challenging. A novel, highly orthogonal separation system based on comprehensive two-dimensional liquid chromatography (LC × LC) has been developed. The system combines hydrodynamic chromatography (HDC) in the first-dimension to separate the particles based on their size, with ultrahigh-performance size-exclusion chromatography (SEC) in the second dimension to separate the constituting polymer molecules according to their hydrodynamic radius for each of 80 to 100 separated fractions. A chip-based mixer is incorporated to transform the sample by dissolving the separated nanoparticles from the first-dimension online in tetrahydrofuran. The polymer bands are then focused using stationary-phase-assisted modulation to enhance sensitivity, and the water from the first-dimension eluent is largely eliminated to allow interaction-free SEC. Using the developed system, the combined two-dimensional distribution of the particle-size and the molecular-size of a mixture of various polystyrene (PS) and polyacrylate (PACR) nanoparticles has been obtained within 60 min.