Online Solid-Phase Extraction-Inductively Coupled Plasma-Quadrupole Mass Spectrometry with Oxygen Dynamic Reaction for Quantification of Technetium-99.

Quantification of pg/L levels (i.e., 0.6 mBq/L) of radioactive technetium-99 (99Tc) was achieved within 15 min in the presence of isobaric and polyatomic interference sources such as ruthenium-99 (99Ru) and molybdenum hydride (98Mo1H) at 3-11 orders of magnitude higher concentrations. Online solid-phase extraction-inductively coupled plasma-quadrupole mass spectrometry (ICP-QMS) with oxygen (O2) dynamic reaction cell (online SPE-ICP-MS-DRC) was shown to be a thorough automatic analytical system, circumventing the need for human handling. At three stepwise separations (SPE-DRC-Q mass filters), we showed that interference materials allowed the coexistence of abundance ratios of 1.5 × 10-13 and 1.1 × 10-5 for 99Tc/Mo and 99Tc/Ru, respectively. A classical mathematical correction using the natural isotope ratio of 99Ru/102Ru was used to calculate the residues of 99Ru. Using this optimized system, a detection limit (DL; 3σ) of 99Tc was 9.3 pg/L (= 5.9 mBq/L) for a 50 mL injection and sequential measurements were undertaken at a cycle of 24 min/sample. For the measurement of a lower concentration of 99Tc, an AG1-X8 anion-exchange column was used to study 20 L of seawater. Its DL was approximately 1000 times greater than that of previous methods (70.0 fg/L). Thus, this method withstands coexistences of 5.8 × 10-18 and 3.5 × 10-9 for 99Tc/Mo and 99Tc/Ru, respectively. Spike and recovery tests were conducted for environmental samples; the resulting values showed good agreement with the spike applied.

Input and output budgets of radiocesium concerning the forest floor in the mountain forest of Fukushima released from the TEPCO's Fukushima Dai-ichi nuclear power plant accident.

Estimations of radiocesium input and output concerning the forest floor within a mountain forest region have been conducted in the north and central part of the Abukuma Mountains of Fukushima, northeast Japan, after a 2-3 year period following the TEPCO Fukushima Dai-ichi nuclear power plant accident. The radiocesium input and output associated with surface washoff, throughfall, stemflow, and litterfall processes at experimental plots installed on the forest floor of evergreen Japanese cedars and deciduous Konara oaks have been monitored. Despite the high output potential in the mountainous forest of Fukushima, the results at both monitoring locations show the radiocesium input to be 4-50 times higher than the output during the summer monsoon in Fukushima. These results indicate that the radiocesium tends to be preserved in the forest ecosystem due to extremely low output ratios (0.05%-0.19%). Thus, the associated fluxes throughout the circulation process are key issues for the projecting the environmental fate of the radiocesium levels, along with the subsequent reconstruction of life emphasized within the setting.

The transfer of radiocesium from the bark to the stemflow of chestnut trees (Castanea crenata) contaminated by radionuclides from the Fukushima Dai-ichi nuclear power plant accident.

We report on the behavior of radiocesium in tree bark and its transfer into the stemflows of chestnut trees in a forest in the Fukushima Prefecture, Japan. In stems that were present at the time of the accident, the radiocesium concentration of the bark was found to be approximately 10 times that of the wood. The average (137)Cs concentration of the dissolved fraction (<0.45 µm) in the stemflow was measured to be around 10 Bq/L. The (137)Cs concentration ratio [present at the time of the accident (Bq/kg) in the bark/the dissolved fraction in the stemflow (Bq/L)] was approximately 10(3). A strong positive correlation was observed between the radiocesium concentration and the electrical conductivity of the dissolved fraction of the stemflow; this result suggests that radiocesium and electrolytes have the same elution mechanism from the tree. The size fractionation analysis of the <0.45 µm fraction through ultrafiltration revealed that the radiocesium was present as an almost dissolved species. Some of the particles in the particulate fraction (>0.45 µm) of the stemflow were strongly adsorbed radiocesium.

Pipette aspiration technique for the measurement of nonlinear and anisotropic mechanical properties of blood vessel walls under biaxial stretch.

A pipette aspiration technique was proposed for the measurement of nonlinear mechanical properties of arteries under biaxial stretching. A cross-shaped specimen of porcine thoracic aorta whose principal axes corresponded with the axial and circumferential directions of the aortic walls was excised. The intraluminal surface of the specimen was aspirated with a circular cross-sectioned glass pipette while the specimen was stretching in the axial and circumferential directions in 10% increments. The elastic modulus agreed with the incremental elastic modulus obtained through a conventional pressure-diameter test of the same specimen to within an error of 30% at a circumferential stretch ratio below 1.3 and an axial stretch ratio of 1.0, 1.1 or 1.2, which represent lower range of physiological stretch ratios for the porcine aorta. A rectangular cross-sectioned pipette was utilized to measure anisotropic properties of the specimen under biaxial stretching. When aspirated with such a pipette, the specimens' elastic properties along the length of the rectangular pipette cross section can be neglected. The elastic modulus was found to increase rapidly when the specimen was stretched in the direction of the pipette's width. Thus, pipette aspiration should have many advantages such as well measurement of the local nonlinear and anisotropic mechanical properties of blood vessel walls.

Local elastic modulus of atherosclerotic lesions of rabbit thoracic aortas measured by pipette aspiration method.

Changes in mechanical properties of arteries during atherogenesis remain controversial. One of the reasons could be that they have been evaluated with parameters measured in a whole vessel, although the lesions are localized. The local elastic modulus of atherosclerotic lesions was measured by the pipette aspiration method in thoracic aortas of rabbits fed a cholesterol diet for 8, 16, 24 and 28 weeks. The global elastic modulus of the whole aorta was measured by the pressure-diameter test. The local modulus decreased from that of the normal tissue in 8 weeks and then increased during the cholesterol feeding period. The global modulus did not change until 24 weeks and increased by 28 weeks. Histological observation revealed that the initial soft lesion was mainly composed of foam cells, and the stiffening accompanied first the appearance of smooth muscle cells in the top layer of the hyperplastic intima and then calcification in its bottom layer. The global elastic modulus did not change until marked calcification occurred in the tissue. These results suggest that change in mechanical properties of atherosclerotic lesion is not simple and has a close correlation with its histology. Assessment of local mechanical properties is important for studying mechanical properties of atherosclerotic arteries.