RESUMO
We demonstrate supermode suppression to levels below -125 dBc/Hz and -132 dBc/Hz using Fabry-Perot etalons with finesse values of 180 and 650, respectively, for a 10 GHz harmonically mode-locked external sigma cavity semiconductor laser. The laser was hybridly mode-locked using direct electrical modulation in a compact package without the need for an external modulator.
RESUMO
We report what is to our knowledge the lowest phase and amplitude noise characteristics achieved to date in a 10-GHz pulse train produced by the active harmonic mode locking of an external-cavity semiconductor diode laser. Supermode noise has also been suppressed below -140 dBc/Hz by use of a high-finesse fiber Fabry-Perot etalon as an intracavity filter. Novel noise sideband measurements that extend to the Nyquist offset frequency suggest a significant advantage in using harmonic (rather than fundamental) mode locking to produce ultralow-noise pulse trains, owing to the relationship between the noise roll-off frequency and the fundamental cavity frequency.
RESUMO
We report measurements of the residual phase-noise knee position and longitudinal-mode linewidth of a hybridly mode-locked external linear cavity semiconductor laser as a function of laser cavity length. Excellent agreement between these measurements suggests a direct relationship between rms pulse-to-pulse timing jitter and average longitudinal-mode linewidth. This relationship leads to a fundamental limit in the timing jitter of mode-locked lasers.
RESUMO
A multiwavelength laser source composed of a single semiconductor optical amplifier and a commercially available off-the-shelf wavelength-division multiplexed (WDM) filter is constructed and tested under actively mode-locking operation. Five independent mode-locked wavelength channels are generated simultaneously, with a wavelength spacing of 1.6 nm established by the WDM filter. In addition, to demonstrate the potential of this mixed time-frequency, or hybrid WDM-optical time-division multiplexed, signal, we demonstrate a simple parallel-to-serial wavelength conversion to increase the pulse repetition rate of the mode-locked laser by a number of output wavelengths for applications in high-performance optical sampling applications.