Computer-Guided Surgery Can Avoid Prophylactic Endodontic Treatment in Autologous Tooth Transplantation: A 5-Year Follow-Up Case Report.

Autotransplantation is a successful technique to replace compromised teeth. This study presents a computer-guided surgical approach for preparing the receiving socket for a mature mandibular third molar donor tooth with a wait-and-see approach instead of prophylactic endodontic treatment. A 42-year-old woman developed root resorption of tooth 3.7. Extraction of 3.7 and autotransplantation of 3.8 was planned, following a 6-week orthodontic phase for periodontal ligament activation and teeth mobilization. Due to the different root morphology between the compromised and donor teeth and the high mandibular bone density, the receiving socket preparation was performed using guided surgery templates. Two surgical splints were designed with a surgical planning software. Tooth 3.7 was extracted, the recipient site was guided-milled, and tooth 3.8 was transplanted into the new socket in approximately one second of extra-alveolar time. The rapidity of the extra-alveolar time facilitated complete healing without resorting to root canal treatment. Five-year radiological control does not show any periapical lesion or root resorption. The surgical procedure for tooth autotransplantation is fundamental: it must be as atraumatic as possible to preserve the periodontal ligament of the tooth and the receiving socket, and the dentist must minimize the extra-alveolar time. Guided surgery is a reliable solution to combine all these aspects.

Influence of augmented reality technique on the accuracy of autotransplanted teeth in surgically created sockets.

BACKGROUND: The objective of the present study was to evaluate the reliability of an augmented reality drilling approach and a freehand drilling technique for the autotransplantation of single-rooted teeth. MATERIALS AND METHODS: Forty samples were assigned to the following surgical techniques for drilling guidance of the artificial sockets: A. augmented reality technique (AR) (n = 20) and B. conventional free-hand technique (FT) (n = 20). Then, two models with 10 teeth each were submitted to a preoperative cone-beam computed tomography (CBCT) scan and a digital impression by a 3D intraoral scan. Afterwards, the autotrasplanted teeth were planned in a 3D dental implant planning software and transferred to the augmented reality device. Then, a postoperative CBCT scan was performed. Data sets from postoperative CBCT scans were aligned to the planning in the 3D implant planning software to analize the coronal, apical and angular deviations. Student's t-test and Mann-Whitney non-parametric statistical analysis were used to analyze the results. RESULTS: No statistically significant differences were shown at coronal (p = 0.123) and angular (p = 0.340) level; however, apical deviations between AR and FT study groups (p = 0.008) were statistically significant different. CONCLUSION: The augmented reality appliance provides higher accuracy in the positioning of single-root autotransplanted teeth compared to the conventional free-hand technique.

Restoration of Teeth with Severely Compromised Tooth Structure using Digital Planning Combined with Orthodontic Magnetic Extrusion-A Report of 2 Cases.

This report outlines 2 digitally planned cases in which the teeth underwent magnetic extrusion to preserve the supracrestal tissue attachment and regain the ferrule, followed by their restoration. Case 1: A 42-year-old man with the chief concern of a fractured right maxillary second premolar. Following the completion of root canal treatment, the remaining tooth structure was insufficient to create a ferrule for tooth restoration. For this scenario, a rapid magnetic extrusion technique was performed on tooth #4 to obtain an approximate 3-mm ferrule. The condition of both the dentition and the restorative margin was acceptable 18 months following treatment. Case 2: A 62-year-old man with the chief complaint of mobility on both sides of the maxillary arch in relation to a tooth-supported fixed partial denture (FPD). Following removal of the FPD, multiple extractions were carried out and tooth #6 was subjected to magnetic extrusion in 3 stages to a maximum of 4 mm to obtain a ferrule. At the 18-month and 3-year follow-up appointments, the tooth had no symptoms and the gingiva around the restorations had optimal architecture and margins. The 3-dimensional digital planning was helpful in precisely positioning the magnets within the tooth and the provisional restorations to facilitate axial extrusion. The extruded teeth were restored with zirconia crowns in both cases. The beneficial outcomes observed from these cases provides evidence that the integration of digital planning and magnetic extrusion holds promise as a method for reconstructing teeth with crowns that are significantly compromised.

Retrospective Follow-up Assessment of Risk Variables Influencing the Outcome of Autologous Tooth Transplantation.

INTRODUCTION: This retrospective study aimed to identify which patient-, donor tooth-, recipient site-, and surgical procedure-related variables may influence the outcome of tooth autotransplantation. METHODS: The sample included 128 autotransplants performed in 122 patients. Single-visit clinical/imaging examinations were used to define the outcome as successful, survival, or failure. The association of potential indicators with the survival or failure categories was analyzed individually and adjusted for confounders through multivariate logistic regression models. RESULTS: After a follow-up period of 1 to 30.11 years, success was achieved in 71.8% of autotransplants, whereas the survival and failure groups had rates of 14.1% each, and the grouped success/survival rate reached 85.9%. An extraoral time >15 minutes and difficult handling/placement were strong/independent risk covariates for survival and failure categories (odds ratio >1, P < .05). Additionally, unerupted/partially erupted status of the donor tooth was a significant indicator for survival, whereas deficient bone level at the recipient site, surgical extraction, poor initial stability, and lack of prophylactic antibiotics were independently linked to failure (odds ratio > 1, P < .05). The root morphology and socket status acted as modifiers of the effect of the recipient site location on the survival group (P > .05). CONCLUSION: Based on the results of this study, unerupted/partially erupted status of the donor tooth, surgical extraction, total extraoral time >15 minutes, deficient recipient's bone level, difficult handling/placement of the autotransplant, poor initial stability, and lack of prophylactic antibiotics during the surgical procedure must be considered with caution when performing autotransplantation because of their deleterious influence on the outcome.

Guided tooth autotransplantation of a palatally impacted maxillary canine into the site of a failed maxillary canine implant.

The aim of this report is to demonstrate the guided tooth autotransplantation of a palatally impacted maxillary canine into the site of a failed maxillary canine dental implant. A 47-year-old woman visited a dental clinic complaining of loose dental implant in the left maxillary canine site, tooth #11, as well as pain and swelling of the gum around the implant. The clinical examination revealed a mobile implant along with swollen soft tissues with bleeding on probing. A periapical radiograph demonstrated peri-implant marginal bone loss. Cone beam computed tomography sections revealed that tooth #11 was impacted palatally. The implant was removed and replaced with the impacted canine via guided autotransplantation and posterior orthodontic alignment. The patient was recalled at 1, 3, 6, 9, 12, 24 and 48 months after the procedure. During this period, the patient was symptom-free and radiographic examination at 2 years revealed no periapical pathosis or root resorption.

A laboratory study comparing the static navigation technique using a bur with a conventional freehand technique using ultrasonic tips for the removal of fibre posts.

AIM: There are currently no high-quality studies comparing the static navigation technique with conventional methods of fibre post removal. The aim of this ex vivo study was to compare the effectiveness of fibre post removal between a static navigation technique and a conventional freehand technique using ultrasonics by experienced and inexperienced operators. METHODOLOGY: Forty-eight extracted single-rooted human premolars were root-filled. A fibre post was cemented in all 48 teeth, which were then divided randomly into the following groups: static navigation group using burs; static navigation-ultrasonic group; and non-guided group using ultrasonic tips. The following parameters were evaluated for both experienced operators and inexperienced operators: reaching the gutta-percha root filling successfully, the time required to remove the entire post, the occurrence of lateral root perforations, and the amount of root dentine removed. The Kolmogorov-Smirnov test was used to examine the normality of the data; the anova test was used to compare the significant differences among groups; and Tukey tests were used for all two-by-two comparisons. The significance level was set at 0.05. RESULTS: In the static navigation group, the gutta-percha was reached significantly more frequently than in the non-guided group (p < .05). The static navigation approach required significantly less time than the non-guided approach to reach the gutta-percha (p < .05). The total removal of posts was significantly different between groups (p < .05), but there was no significant difference between experienced and inexperienced operators in the static navigation group (p > .05). More perforations were associated with the non-guided group than with the other two groups. The total mean loss of dentine in the non-guided group in all directions was 0.39 (±0.17) mm, with 0.25 (±0.09) mm for experienced, and 0.42 (±0.16) mm for inexperienced operators. CONCLUSION: When compared to a conventional ultrasonic technique for the removal of fibre posts, the static navigation method using burs resulted in less dentine removal, more rapid access to the gutta-percha root filling, less overall time to remove the posts, and fewer complications. When using static navigation, there was no difference in performance between experienced and inexperienced operators.

Guided Autotransplantation of an Immature Premolar to the Maxillary Incisor Region with Immediate Restoration of Esthetics: A Case Report.

This case report describes the treatment of two maxillary central incisors following a traumatic injury with tooth #8 developing replacement resorption and #9 developing inflammatory root resorption. A 10-year-old girl presented complaining of pain in her maxillary central incisors. Upon clinical examination, teeth #8 and #9 were tender to percussion and palpation of the buccal soft tissues. Thermal and electrical pulpal sensitivity tests for teeth #8 and #9 were negative. An intraoral periapical radiograph revealed resorptive defects in tooth #8, which were filled with bone-like tissue, while tooth #9 had radiolucent resorptive defects along the root surface and a periapical radiolucency. A diagnosis of replacement resorption was made for tooth #8 and external inflammatory root resorption for tooth #9. Tooth #8 was treated with a multidisciplinary approach utilizing a guided template for premolar autotransplantation with an immediate veneer restoration, while tooth #9 was managed with root canal treatment using a tricalcium silicate cement to fill the canal. At the 1, 4, 8, 12, and 24-month follow-ups, the patient remained asymptomatic, and there was no radiographic evidence of root or periapical pathosis on either tooth. The root-end of the donor tooth transplanted to the #8 site continued to develop. This case report highlights successful interdisciplinary management of two forms of root resorption using modern treatment strategies that provided immediate function and esthetics to the maxillary central incisors in a young patient following trauma.

Multidisciplinary conservative management of a severely discolored nonvital tooth.

This clinical report describes a multidisciplinary protocol for the management of a severely discolored nonvital maxillary anterior tooth based on minimally invasive treatment with in-office and home bleaching combined with restoration with composite resin.

Successful Root Canal Treatment of an Atypical Mandibular Canine with a Boomerang-shaped Root and Canal System with a Large Periapical lesion-A Case Report with 9-year Follow-up.

AIM: This report describes an atypical mandibular canine with a single boomerang-shaped root and root canal system with a large periapical lesion managed by root canal treatment. METHODS: The chief complaint of a 16-year-old male was acute pain and an abnormal sensation in the right mandibular canine (tooth #27). The clinical examination revealed that tooth #27 had an unusual coronal morphology. The buccal aspect of the tooth resembled that of a normal canine but was significantly broader than expected. On the lingual aspect of the crown; however, there was an unusual cusp-like structure with ridges that was slightly less prominent than the buccal incisal tip. The intraoral periapical radiographs revealed a complex root with an obvious cow horn-shaped canal mesially and distally, but with the suggestion of a root structure joining the mesial and distal extensions. A large periapical lesion was present. Computed tomography revealed the presence of a single root and canal system shaped like a boomerang. Root canal treatment was performed and the patient was followed-up for 9 years. RESULTS: Following root canal treatment, the patient had no symptoms, no mobility, no periodontal pockets, or root resorption. At 9 years, the cone beam computed tomography images confirmed that satisfactory healing of the periapical tissues had occurred. CONCLUSION: The mandibular right canine had a unique boomerang-shaped root and canal system. Effective shaping and cleaning of the complex canal shape plus thermoplastic root filling aided the successful healing of the periapical lesion.

Accuracy of CAD-CAM Surgically Guided Tooth Autotransplantation Using Guided Templates and Custom-designed Osteotomes in Human Cadaver Mandibles.

INTRODUCTION: A major challenge in dentistry is the replacement of teeth lost prematurely due to trauma, caries, or malformations; especially in growing patients. The aim of this study was to assess the accuracy of CAD-CAM surgically guided tooth autotransplantation in cryopreserved cadaver mandibles using guided templates and custom-designed osteotomes. METHODS: Cryopreserved human cadaver heads were digitized and scanned using an intraoral optical scanner and a large-volume cone beam computed tomography device. First, virtual surgical planning was performed to create a 3D tooth replica, 2 surgical guides, and a custom-made osteotome for each single-rooted tooth autotransplantation procedure/case. Surgical sockets were created in the selected mandibles using guided tooling consisting of an initial guided osteotomy with implant burs and a final guided osteotomy using custom osteotomes. After tooth autotransplantation, second large-volume cone beam computed tomography images of the 5 cadaver mandibles were obtained. The discrepancy in mm within the 3D space (apical and mesiodistal deviations) between the final position of the autotransplanted teeth and their digitally planned 3D initial position was calculated and analyzed statistically (P < .05). RESULTS: All donor teeth were placed without incident within their newly created sockets in the real mandibles. The mean difference between the digitally planned root apex position and the final tooth position was 2.46 ± 1.25 mm. The mesiodistal deviation of the autotransplanted teeth was 1.63 ± 0.96 mm. CONCLUSIONS: The autotransplantation of single-rooted teeth with custom-designed and 3D-printed surgical tooling provided promising results. The technique was able to create surgically prepared sockets that could accommodate transplanted teeth in mandibles.

Autotransplantation of Maxillary Third Molar with Its Attached Buccal Cortical Plate Combined with a Connective Tissue Graft.

INTRODUCTION: Tooth replacement often leads to insufficient vertical volume in the recipient socket bone. The aim of this novel report is to present a successful fully guided autotransplantation of a maxillary right third molar (tooth #1) with its attached buccal plate. The procedure was combined with a palatal connective tissue graft to reconstruct a buccal hard and soft tissue defect of an irreparable maxillary right first molar (tooth #3). METHODS: A 45-year-old man complaining of pain in tooth #3 came to the clinic. Tooth #3 was non-restorable due to an extensive caries and a vertical root fracture of the mesiobuccal root, leading to a total loss of the buccal cortical plate. Guided autotransplantation of tooth #1 was completed by using 3-dimensional surgical templates for implant burs and a 3-dimensional-printed replica. After positioning the donor tooth, the cortical plate was fixed to the recipient socket with osteosynthesis screws. A connective tissue graft was also harvested to increase the band of keratinized gingiva and the thickness of the buccal soft tissue. At 6-month follow-up, the screws were removed, showing excellent regeneration throughout the buccal area. RESULTS: At 3-year follow-up, the transplanted tooth was asymptomatic, with a natural bone level and no signs of replacement or inflammatory root resorption. CONCLUSIONS: The use of a donor tooth and its attached bone cortical plate combined simultaneously with a connective tissue graft appears to improve hard and soft tissues in a single procedure.

Effectiveness of intentional replantation in managing teeth with apical periodontitis: A systematic review.

BACKGROUND: Intentional replantation (IR) to treat disease of endodontic origin remains controversial. While IR has been advocated by some clinicians as another valid treatment option, others consider it as a treatment procedure of last resort. OBJECTIVE: To systematically review and critically evaluate the effectiveness of IR compared with nonsurgical root canal treatment/retreatment or apical surgery in terms of clinical and patient-related outcomes in managing permanent teeth with apical periodontitis (AP). METHODS: A literature search of five databases (PubMed, Embase, Scopus, Web of Science and Cochrane Central register of Controlled Trials), and the grey literature (Networked Digital Library of Theses and Dissertations, Open Access Theses and Dissertations, DART-Europe E-theses Portal, British Library E-Theses Online Service), from inception to November 2021, was conducted. Randomised clinical trials, comparative clinical trials (CCTs), nonrandomised, retrospective, and prospective comparative cohort and case-control two arm studies which evaluated clinical and/or patient-related outcomes of permanent teeth with AP treated with IR compared with nonsurgical root canal treatment/retreatment or apical surgery were identified. The quality of the studies was appraised using the Cochrane risk of bias tool for randomized trials (RoB 2.0), the Robins-I for nonrandomized controlled clinical trials and the Newcastle-Ottawa scale for observational studies. Two independent reviewers were involved in the literature selection, performed the data extraction and the appraisal of the studies identified; disagreements were resolved in conjunction with a third reviewer. RESULTS: No comparative study was identified from the literature search. Four longitudinal studies (one prospective and three retrospective) were identified during the screening of titles and abstracts but were excluded after reading the full text, because only IR was evaluated (single arm studies). DISCUSSION: The available evidence on IR is mainly based on observational studies, which reported high overall mid- to long-term survival, and low complication rates. The results suggest that IR may represent an alternative treatment procedure to solve problems of endodontic origin. However, in the absence of high-quality evidence from CCTs, clinical decision-making should be on a case-by-case basis and in accordance with the clinician's experience and the patient's preference. CONCLUSION: Clinical studies showed that IR may be a treatment modality to manage problems of endodontic origin. However, clinical trials comparing the effectiveness of IR with nonsurgical root canal treatment/retreatment or apical surgery are still required given the paucity of evidence.

Forced orthodontic extrusion for an apparently hopeless anterior tooth by using a simplified approach.

When restoring severely compromised teeth, respecting the supracrestal tissue attachment and retaining the most coronal and radicular tooth structure is essential to achieving a sufficient ferrule. Forced orthodontic extrusion is a minimally invasive method that allows hard- and soft-tissue conservation. This article describes the treatment of a severely damaged maxillary central incisor that was managed by using a simplified orthodontic extrusion method with intracoronal elastic and metal ligatures applied through a palatal bar and followed by the biologically oriented preparation technique (BOPT). This orthodontic procedure reduces a forward clockwise advance during vertical extrusion, thus maintaining the buccal bone plate.

Applications of maxillary tuberosity block autograft.

OBJECTIVE: Autogenous bone grafts are considered the gold standard due to their compatibility and osteogenic potential to induce new bone formation through osteogenesis, osteoinduction, and osteoconduction. The aim of this paper was to describe clinical applications of the maxillary tuberosity block autograft in small and moderate localized defects of the alveolar process around implants and teeth. CLINICAL CONSIDERATIONS: Maxillary tuberosity is often used as a particulate graft for augmentation of deficient alveolar ridge or maxillary sinus prior to or simultaneously with implant insertion, but not as a bone block graft. The maxillary tuberosity block autograft may also provide a valuable bone source for challenging situations such as immediate implant placement into types II and III extraction sockets, treatment of horizontal and vertical bone defects with simultaneous implantation, reconstruction of circumferential defects around implants, and preservation of alveolar ridge. CONCLUSIONS: The advantages of the maxillary tuberosity include intraoral corticocancellous autogenous graft with fewer intraoperative difficulties, no need for donor site restoration, less morbidity, and an excellent correction of localized alveolar ridge defects. CLINICAL SIGNIFICANCE: Within the limitations of the presented case reports, the use of maxillary tuberosity block autograft has shown to be successful in alveolar ridges augmentation that lack both width and height.

Present status and future directions: Surgical extrusion, intentional replantation and tooth autotransplantation.

Surgical extrusion, intentional replantation and tooth autotransplantation procedures are important treatment options that clinicians may consider performing in their day-to-day clinical practice. Despite compromised teeth are generally considered for extraction, clinicians must be aware that these cases could be suitable for management by these alternative predictable treatment options. Surgical extrusion, intentional replantation or tooth autotransplantation have similar treatment protocols which includes atraumatic tooth extraction, visualisation of the root portion and replantation. Surgical extrusion is defined as the 'procedure in which the remaining tooth structure is repositioned at a more coronal/supragingival position in the same socket in which the tooth was located originally'. Intentional replantation is defined as the 'deliberate extraction of a tooth and after evaluation of root surfaces, endodontic manipulation and repair, placement of the tooth back into its original position'. Tooth autotransplantation is defined as the 'transplantation of an unerupted or erupted tooth in the same individual, from one site to another extraction site or a new surgically prepared socket'. The same team previously published a narrative review (International Endodontic Journal. 2020, 53, 1636) and European Society of Endodontology position statement (International Endodontic Journal. 2020, 54, 655) on this topic in International Endodontic Journal. The aim of the current updated review was to provide the reader a complete overview and background on these procedures, to established clear clinical protocols and step-by-step for technically perform these therapies in their clinical practice and to establish future directions on the topics. The clinicians must periodically update their knowledge about these three procedures to achieve success.

Novel digital technique to analyze the accuracy and intraoperative complications of orthodontic self-tapping and self-drilling microscrews placement techniques: An in vitro study.

INTRODUCTION: The objectives of this study were to analyze and compare the accuracy and intraoperative complications of orthodontic self-tapping and orthodontic self-drilling microscrew placement techniques. METHODS: A total of 60 orthodontic microscrews were randomly distributed into 2 study groups: (1) group A, orthodontic self-drilling microscrew placement technique (n = 30); and (2) group B, orthodontic self-tapping microscrew placement technique (n = 30). Cone-beam computed tomography and intraoral scans were performed before and after the orthodontic microscrew placement techniques and uploaded in 3-dimensional implant planning software to analyze the deviation angle and the horizontal deviation measured at the coronal entry point and apical endpoint between orthodontic microscrews planned and performed, using the Student t test. In addition, intraoperative complications, such as root perforations after the orthodontic microscrews placement and the fracture of the orthodontic self-tapping microscrews during their placement, were also analyzed. RESULTS: The paired t test revealed statistically significant differences at the apical endpoint (P <0.001) between planned and performed orthodontic self-tapping and self-drilling microscrew placement techniques. However, the paired t test revealed no statistically significant differences at the coronal entry point (P = 0.1047) and angular deviations (P = 0.3251) between planned and performed orthodontic self-tapping and self-drilling microscrews placement techniques. Furthermore, 4 root perforations were observed at the orthodontic self-tapping microscrews placement technique, and 1 orthodontic self-tapping microscrew was fractured during the placement procedure. CONCLUSIONS: The results show that the orthodontic self-drilling microscrew technique increases the accuracy of orthodontic microscrews placement, resulting in fewer intraoperative complications.

Influence of Static Navigation Technique on the Accuracy of Autotransplanted Teeth in Surgically Created Sockets.

The aim of this study was to analyse and compare the position of single-rooted autotransplanted teeth using computer-aided SNT drilling and conventional freehand (FT) drilling, by comparing the planned and performed position at the coronal, apical and angular level. MATERIALS AND METHODS: Forty single-root upper teeth were selected and distributed into the following study groups: A. Autotransplanted tooth using the computer-aided static navigation technique (SNT) (n = 20) and B. Autotransplanted tooth using the conventional free-hand technique (FT) (n = 20). Afterwards, the teeth were embedded into two experimental models and 10 single-root upper teeth were randomly autotransplanted in each experimental model. The experimental models were submitted to a preoperative cone-beam computed tomography (CBCT) scan and a digital impression by a 3D intraoral scan, in addition to a postoperative CBCT scan, after the autotransplantation. Datasets from postoperative CBCT scans of the two study groups were uploaded to the 3D implant planning software, aligned with the autotransplantation planning, and the coronal, apical and angular deviations were measured. The results were analysed using Student's t-test and Mann-Whitney non-parametric statistical analysis. RESULTS: Coronal (p = 0.079) and angular (p = 0.208) statistical comparisons did not present statistically significant differences; however, statistically significant differences between the apical deviation of the SNT and FT study groups (p = 0.038) were also observed. CONCLUSIONS: The computer-aided static navigation technique does not provide higher accuracy in the positioning of single-root autotransplanted teeth compared to the conventional free-hand technique.

Impacted Maxillary Canine with Curved Apex: Three-Dimensional Guided Protocol for Autotransplantation.

INTRODUCTION: Maxillary canines play a crucial role in dental and facial aspect, arch expansion, and efficient occlusion. When surgical exposure measures cannot be executed or the patient does not agree to take the treatment, autotransplantation should be considered. The aim of this case report was to describe a novel surgical technique using virtually planned three-dimensional (3D)-printed templates for guided apicoectomy and guided drilling of the recipient site for autotransplantation of an impacted maxillary canine with a curved apex. METHODS: A 42-year-old man complaining of pain and increased mobility in the maxillary left primary canine came to the clinic. Autotransplantation of the impacted canine was completed using altered methods from guided implant surgery to manufacture 3D-printed templates. After a full-thickness mucoperiosteal flap elevation, the surgical template for the guided osteotomy and apicoectomy was inserted. This 3D-printed guide allowed the clinician to perform a quick and precise removal of the curved apex, providing an atraumatic extraction of the impacted canine throughout the cyst. Three further 3D surgical guides for implant burs and a 3D replica tooth were printed to modify the recipient socket. After the final position, the tooth was semi-rigid splinted to the adjacent teeth. RESULTS: Follow-up at 2 years showed complete regeneration of the palatal defect and remodeling of the bone surrounding the maxillary canine. CONCLUSIONS: Digitally planned procedures can facilitate the complex execution of an autotransplantation, reducing the treatment chair time and the morbidity for the patient as well as increasing the predictability of the result.

Guided autotransplant of a first premolar to replace a maxillary ankylosed incisor using a custom-designed osteotome.

BACKGROUND: Autotransplantation is a highly successful technique to replace ankylosed teeth. The authors propose a modified therapeutic approach to guide the autotransplant of an immature maxillary premolar using a tooth-shaped osteotome. CASE DESCRIPTION: A 9-year-old boy reported an avulsion of his maxillary permanent left central incisor with a delayed replantation. An autotransplant of the immature maxillary right first premolar into the position of the affected tooth was planned. A surgical 3-dimensional guiding template and a tooth-shaped osteotome were manufactured to prepare the neo-alveolus (referring to the creation or modification of an alveolus to house the tooth) modification. Although the donor tooth was placed in the recipient socket with the buccal side of the root fully exposed, the transplant outcome was successful. PRACTICAL IMPLICATIONS: The use of 3-dimensionally designed surgical osteotome could improve accuracy and surgical handling of a donor tooth autotransplant, even with substantial bone defects in the recipient site.

Periodontal and Periapical Outcomes of Surgical Extrusion: A Prospective Clinical Volumetric Study.

INTRODUCTION: Outcome predictors for the restoration of endodontically treated teeth mainly include cavity wall integrity and the presence of a 1.5-2 mm ferrule. However, in some clinical situations, the aforementioned predictors cannot be achieved. Three different techniques have been proposed to obtain an adequate ferrule respecting the supracrestal tissue attachment: surgical crown lengthening, orthodontic forced eruption, and surgical extrusion. There are little published prospective data evaluating periodontal changes after surgical extrusion. Therefore, the aims of this study were to report the outcome of surgical extrusion in single-rooted teeth, to digitally evaluate soft tissue volumetric changes after surgical extrusion, and to observe patient satisfaction regarding the treatment after a minimum of 1 year. METHODS: This prospective clinical study was performed between 2017 and 2020. Thirteen patients referred for surgical extrusion met the following inclusion criteria: nonsmokers; systemically healthy with at least 1 straight, single-rooted tooth with an insufficient ferrule; a favorable tooth crown-to-root ratio, and no periodontal pathology. Preoperative clinical variables included patient age, sex and phenotype, tooth number, tooth mobility, crown-to-root ratio, gingival index (GI), probing pocket depths at 6 sites, bleeding on probing (BOP), and mesial and distal interproximal papillae volume. Surgical extrusion was performed by a single operator who completed the root canal treatment/retreatment and restored the teeth with a crown. One year later, all patients were controlled, and the following variables were recorded: tooth mobility, crown-to-root ratio, GI, pocket depth, BOP, interproximal papillae aspect, soft tissue rebound, periapical healing, marginal bone loss, and patient-reported outcome measures of the treatment. All variables were analyzed using a descriptive method (mean, %). The Wilcoxon test was used to evaluate pre- and postoperative clinical parameters at a significance level of .05. RESULTS: At a mean follow-up period of 18.8 months, no teeth were extracted. Compared with preoperative GI and BOP, a significant reduction was observed at 1 year after surgery. Likewise, no significant differences in probing depths were shown, and only 1 tooth presented a type 2 mobility. The mean soft tissue rebound was -0.46 ± 0.69 mm. Overall, no significant interproximal papillae height loss was observed.Apical lesions were completely healed after surgery. The tooth crown-to-root ratio was favorable in all cases before extrusion, whereas in 3 cases it was appropriate (1 = 1), and only 1 case presented >25% of marginal bone loss during the follow-up period. The reported success rate was 92.3%, and patients were generally satisfied with the outcome. CONCLUSIONS: Surgical extrusion of single-rooted teeth was successful with minimal or no soft tissue loss, and patients were satisfied with the surgical procedure and the esthetic result.