RESUMO
A two-level full factorial design was used to analyze several factors involved in PSF-GO-Pebax thin film nanocomposite membranes development. Permeate flux was chosen as a single response for four possible factors: Pebax selective layer concentration, amount of GO load to Pebax selective layer, Pebax-GO selective layer thickness, and amount of GO load to PSF substrate. The study is aimed at factors interaction and contribution towards the highest permeation flux via FFD and RSM approach. R 2 obtained from the ANOVA is 0.9937 with Pebax concentration as the highest contributing factor. Pebax concentration-amount of GO load to PSF substrate is the only interaction contributing to the highest flux. A regression analysis concluded the study with model development and an optimized condition for the membrane design.
RESUMO
The contribution of palm oil fuel ash (POFA), an agricultural waste as a low cost adsorbent for the removal of arsenite (As(III)) and arsenate (As(V)) was explored. Investigation on the adsorbency characteristics of POFA suspension revealed that the surface area, particle size, composition, and crystallinity of the SiO2 rich mullite structure were the crucial factors in ensuring a high adsorption capacity of the ions. Maximum adsorption capacities of As(III) and As(V) at 91.2 and 99.4â¯mgâ¯g-1, respectively, were obtained when POFA of 30⯵m particle size was employed at pH 3 with the highest calcination temperature at 1150⯰C. An optimum dosage of 1.0â¯g of dried POFA powder successfully removed 48.7% and 50.2% of As(III) and As(V), respectively. Molecular modeling using the density functional theory consequently identified the energy for the proposed reaction routes between the SiO- and As+ species. The high stability of the POFA suspension in water in conjunction with good adsorption capacity of As(III) and As(V) seen in this study, thus envisages its feasibility as a potential alternative absorbent for the remediation of water polluted with heavy metals.
