Molecular insights and thermodynamic feasibility of phosphate adsorption on Ca-biocomposites using a simplified carbon structure.

The removal of phosphorous from water sources is a critical challenge in mitigating water eutrophication. Adsorption using Ca-biocomposite-derived materials has proven to be highly effective for phosphorus removal. These biocomposites contain Ca, CaO, and Ca-(hydr)oxide species, which form Ca-P apatite phases, a potential fertilizer, holding promise for phosphorus recycling and promoting a circular economy. Density Functional Theory calculations were conducted to gain molecular insights into the thermodynamic feasibility of calcium-based adsorbents. Four models were used, viz. Ca2+, CaO monomer and dimmer, and Ca-(hydr)oxide, all embedded in a carbon matrix. Several binding modes were evaluated for [H2PO4]- and [H2PO4.6H2O]-, including monodentate mononuclear, bidentate mononuclear, and bidentate binuclear denticities. Adsorption, enthalpy, and Gibbs free energy changes were used as descriptors, together with Natural Bond Orbitals analysis. The findings indicate that [H2PO4.6H2O]- adsorption is thermodynamically favored primarily on the CaO dimmer, followed by the CaO monomer, and finally on Ca2+, suggesting a preference for binding phosphate through a monodentate mononuclear mode. The [H2PO4]- adsorption on the Ca-(hydr)oxide model was found to resemble the system's pH considering the H2O/OH ratio, an approximation of acid, intermediate, and basic pH conditions. Our research demonstrated the phosphate adsorption feasibility across a range of pH conditions, providing a solid foundation for further analysis such as infrared and X-ray photoelectron spectroscopy. The Ca-(hydr)oxide model effectively simulates interactions between phosphate species and calcium-based adsorbents, approximating real environments. It enhances understanding of adsorption across various chemical environments, including the pH effect, and aligns with observed structural changes during phosphate adsorption. By combining theory with practical applications, this model aids in comprehending phosphate removal processes, guiding adsorbent optimization, and environmental strategies like eutrophication mitigation.

Green adsorbents for pharmaceutics removal from urine: Analysis of isotherms, kinetics, adsorption interactions, cost estimation, and environmental impact.

Husks of rice (RH), coffee (CH), and cholupa (CLH) were used to produce natural adsorbents. The natural adsorbents were used to remove pharmaceuticals such as diclofenac, ciprofloxacin, and acetaminophen in a mixture of distilled water. However, CH stood out for its efficiency in removing ciprofloxacin (74%) due to the higher concentration of acidic groups, as indicated by the Boehm method. In addition, CH removed 86% of ciprofloxacin individually. Therefore, CH was selected and used to remove other fluoroquinolones, such as levofloxacin and Norfloxacin. Although electrostatic interactions favored removals, better removal was observed for ciprofloxacin due to its smaller molecular volume. Then, ciprofloxacin was selected, and the effect of pH, matrix, and adsorbent doses were evaluated. In this way, using a pH of 6.2 in urine with a dose of 1.5 g L-1, it is possible to adsorb CIP concentrations in the range (0.0050-0.42 mmol L-1). Subsequently, the high R2 values and low percentages of APE and Δq indicated better fits for pseudo-second-order kinetics, suggesting a two-stage adsorption. At the same time, the Langmuir isotherm recommends a monolayer adsorption with a Qm of 25.2 mg g-1. In addition, a cost of 0.373 USD/g CIP was estimated for the process, where the material can be reused up to 4 times with a CIP removal in the urine of 51%. Consequently, thermodynamics analysis showed an exothermic and spontaneous process with high disorder. Furthermore, changes in FTIR analysis after adsorption suggest that CH in removing CIP in urine involves electrostatic attractions, hydrogen bonds and π-π interactions. In addition, the life cycle analysis presents, for the 11 categories evaluated, a lower environmental impact of the CIP removal in urine with CH than for the preparation of adsorbent, confirming that the adsorption process is more environmentally friendly than materials synthesis or other alternatives of treatments. Furthermore, future directions of the study based on real applications were proposed.

Encapsulation of charged halogens by the 512 water cage.

This study focuses on the encapsulation of the entire series of halides by the 512 cage of twenty water molecules and on the characterization of water to water and water to anion interactions. State-of-the-art computations are used to determine equilibrium geometries, energy related quantities, and thermal stability towards dissociation and to dissect the nature and strength of intermolecular interactions holding the clusters as stable units. Two types of structures are revealed: heavily deformed cages for F- indicating a preference for microsolvation, and slightly deformed cages for the remaining anions indicating a preference for encapsulation. The primary variable dictating the properties of the clusters is the charge density of the central halide, with the most severe effects observed for the F- case. For the remaining halides, the anion may be safely viewed as a sort of "big electron" with little local disruptive power, enough to affect the network of non-covalent hydrogen bonds in the cage, but not enough to break it. Gibbs energies for dissociation either into cavity and halide or into water molecules and halide suggest that, in a similar way as to methane clathrate, a more weakly bonded complex that has been detected in the gas phase, all halide containing clathrate-like structures should be amenable to experimental detection in the gas phase at moderate temperature and pressure conditions.

Production of activated carbon from agave residues and its synergistic application in a hybrid adsorption-AOPs system for effective removal of sulfamethazine from aqueous solutions.

Tequila production in Mexico generates large quantities of agave bagasse (AB), a waste that could be used more efficiently. AB has a high cellulose, hemicellulose, and lignin content, which allows its use as a precursor for synthesizing carbonaceous materials. In the present work, the synthesis of activated carbon impregnated with Fe2+ (AG-Fe-II) and Fe3+ (AG-Fe-III) was carried out and evaluated in a hybrid adsorption-AOP (advanced oxidation process) methodology for sulfamethazine removal (SMT). The materials were characterized before and after the process to determine their morphological, textural, and physicochemical properties. Subsequently, the effect of the main operational variables (pH, initial SMT concentration, mass, and activator dosage) on the hybrid adsorption-degradation process was studied. The Fenton-like reaction was selected as the AOP for the degradation step, and potassium persulfate (K2S2O8) was used as an activating agent. The main iron crystallographic phases in AG-Fe-II were FeS, with a uniform distribution of iron particles over the material's surface. The main crystallographic phase for AG-Fe-III was Fe3O4. The hybrid process achieved 61% and 78% removal efficiency using AG-Fe-II and AG-Fe-III samples, respectively. The pH and initial SMT concentration were the most critical factors for removing SMT from an aqueous phase. Finally, the material was successfully tested in repeated adsorption-degradation cycles.

Performance of novel Ca-biocomposites produced from banana peel and eggshell for highly efficient removal and recovery of phosphate from domestic wastewater.

Using biowaste-based adsorbents to remove phosphorus (P) from wastewater offers significant benefits concerning eutrophication mitigation and addressing waste management challenges. In this work, Ca-biocomposites were prepared by pyrolysis (700 °C) of a mixture of banana peel (BP) and eggshell (ES). The mass ratio of BP to ES was varied in 2:1, 1:1, and 1:2 ratios. Among the tested mixtures, the BPES-1:2 sample exhibited excellent P removal performance, reaching a maximum P adsorption capacity (Qmax) of 214 ± 5 mg P/g. The adsorption process fitted well with the Avrami order kinetic model (R2 > 0.996) and the Liu isotherms model (R2 > 0.997). The excellent fit of the experimental data to the Avrami model suggests that chemisorption is the dominant interaction mechanism, leading to precipitation through the formation of calcium phosphates. Additionally, the Liu model anticipates that the energetic characteristics of the adsorbent's active sites cannot be identical. This is in agreement with the presence of Ca(OH)2 and CaCO3 in the adsorbent material, where the Ca(OH)2 active sites are preferred by the adsorbate molecules (PO43-) for occupation. Furthermore, thermodynamic analysis revealed that P adsorption is a spontaneous process of exothermic nature (ΔH° < 0). The calculated activation energy for the process (72.81 kJ/mol) suggests the P adsorption mechanism involves strong chemical bonding between the adsorbent and P species. In addition, precipitation of apatite (Ca5(PO4)3OH), a vital component in fertilizer production, was observed during the adsorption process. In tertiary treated wastewater applications, the BPES-1:2 biocomposite demonstrated a P removal efficiency of 90%. The solubility of P in a 2% formic acid solution was 100%, while the water-soluble P content was measured at 5.6%. These findings highlight the product's sustainable and environmentally beneficial nature by demonstrating its potential as a slow-release fertilizer, contributing to the application of the 3R slogan: Reduce, Reuse, Recycle. This value-added product is promising in supplying nutrients to plants over an extended period while minimizing the risk of nutrients leaching into the environment.

Rice husk-based pyrogenic carbonaceous material efficiently promoted peroxymonosulfate activation toward the non-radical pathway for the degradation of pharmaceuticals in water.

Pristine pyrogenic carbonaceous material (BRH) obtained from rice husk and modified with FeCl3 (BRH-FeCl3) were prepared and explored as carbocatalysts for the activation of peroxymonosulfate (PMS) to degrade a model pharmaceutical (acetaminophen, ACE) in water. The BRH-FeCl3/PMS system removed the pharmaceutical faster than the BRH/PMS. This is explained because in BRH-FeCl3, compared to BRH, the modification (iron played a role as a structuring agent mainly) increased the average pore diameter and the presence of functional groups such as -COO-, -Si-O-, or oxygen vacancies, which allowed to remove the pollutant through an adsorption process and significant carbocatalytic degradation. BRH-FeCl3 was reusable during four cycles and had a higher efficiency for activating PMS than another inorganic peroxide (peroxydisulfate, PDS). The effects of BRH-FeCl3 and PMS concentrations were evaluated and optimized through an experimental design, maximizing the ACE degradation. In the optimized system, a non-radical pathway (i.e., the action of singlet oxygen, from the interaction of PMS with defects and/or -COO-/-Si-O- moieties on the BRH-FeCl3) was found. The BRH-FeCl3/PMS system generated only one primary degradation product that was more susceptible to biodegradation and less active against living organisms than ACE. Also, the BRH-FeCl3/PMS system induced partial removals of chemical oxygen demand and dissolved organic carbon. Furthermore, the carbocatalytic system eliminated ACE in a wide pH range and in simulated urine, having a low-moderate electric energy consumption, indicating the feasibility of the carbocatalytic process to treat water polluted with pharmaceuticals.

Sargassum macroalgae from Quintana Roo as raw material for the preparation of high-performance phosphate adsorbent from aqueous solutions.

Currently, the large volumes of Sargassum biomass (Sgs) arriving on Caribbean coasts are a problem that must be solved quickly. One alternative is to obtain value-added products from Sgs. In this work, Sgs is demonstrated to be a high-performance Ca - bioadsorbent for phosphate removal by a heat pretreatment at 800 °C that produces biochar. According to XRD analysis, calcined Sgs (CSgs) have a composition of 43.68%, 40.51%, and 8.69% of Ca(OH)2, CaCO3, and CaO, making CSgs a promising material for phosphate removal and recovery. Results demonstrated that CSgs have a high capacity to adsorb P over a wide range of concentrations (25-1000 mg P/L). After P removal, at low P concentration, the adsorbent material is rich in apatite (Ca5(PO4)3OH), and at high P concentration, brushite (CaHPO4•2H2O) was the main P compound. The CSg reached a Qmax of 224.58 mg P/g, which is higher than other high-performance adsorbents reported in the literature. The phosphate adsorption mechanism was dominated by chemisorption, followed by precipitation according to the pseudo-second-order kinetic model. The solubility of P (74.5 wt%) in formic acid solution and the water-soluble P (24.8 wt%) for CSgs after P adsorption indicated that the final product presents the potential to be used as fertilizer for acid soils. This biomass's processability and high phosphate adsorption performance for P removal make CSgs a potential material for wastewater treatment, and subsequent use of these residues as fertilizer offers a circular economy solution to this problem.

Encapsulation of Astatide by a water cage.

A 512 cage of (H2O)20 consisting of 30 hydrogen bonds encapsulates Astatide with little geometrical distortion. The cage is marginally destabilized but the non-covalent interactions are actually strengthened. Host⋯cage interactions in the [At@(H2O)20]- cluster are anti-electrostatic, placing both negatively charged atoms in direct contact as in Atδ-⋯δ-O-Hδ+. An orbital interaction analysis reveals that explicit host⋯cage contacts are "inverted" hydrogen bonds. That is, the same type of donor→acceptor charge transfer as in hydrogen bonding, with no proton bridging the two negative charges.

Biochar from palm fiber wastes as an activator of different oxidants for the elimination of pharmaceuticals from diverse classes in aqueous samples.

Biochar (BP) obtained from palm fiber wastes was combined with H2O2, peroxymonosulfate (PMS), or persulfate (PDS) to treat valsartan, acetaminophen, and cephalexin in water. BP activated PMS and PDS but no H2O2. Computational calculations indicated that interactions of PMS and PDS with BP are more favored than those with HP. The highest synergistic effect was obtained for the removal of valsartan by BP + PMS. This carbocatalytic process was optimized, evaluating the effects of pH, BP dose, and peroxymonosulfate concentration, and minimizing the oxidant quantity to decrease costs and environmental impacts of the process. SO4•-, HO•, 1O2, and O2•- were the agents involved in the degradation of the pharmaceuticals. The reusability of BP was tested, showing that the carbocatalytic process removed ∼80% of target pollutants after 120 min of treatment even at the fourth reuse cycle. Also, the process decreased the phytotoxicity of the treated sample. Simulated hospital wastewater was treated and its components induced competing effects, but the system achieved the target pharmaceuticals removal in this matrix. Additionally, the analysis of environmental impact using a life cycle assessment unraveled that the carbocatalytic process had a carbon footprint of 2.87 Kg CO2-Eq, with the biochar preparation (which involves the use of ZnCl2 and electric energy consumption) as the main hotspot in the process.

Microsolvation versus Encapsulation in Mono, Di, and Trivalent Cations.

The effects of the formal charge in the stability and bonding of water cavities when solvating a cation are studied here using [X(H2 O)20 ]q+ clusters starting with the well known 512 isomer of (water)20 , placing a single mono, di, or trivalent Xq+ cation at the interior, and then optimizing and characterizing the resulting clusters. Highly correlated interaction and deformation energies are calculated using the CCSD(T)-DLPNO formalism. Bonding interactions are characterized using the tools provided by the quantum theory of atoms in molecules, natural bond orbitals, and non-covalent surfaces. Our results indicate that water to water hydrogen bonds are sensibly strengthened resulting in strong cooperative effects, which amount to ≈ 2 ${ \approx 2}$  kcal/mol per hydrogen bond in the bare cavity and to larger values for the systems including the cations. Approximate encapsulation, that is, surrounding the cation by a network of hydrogen bonds akin to the well known methane clathrate seems to be preferred by cations with smaller charge densities while microsolvation, that is, cluster structures having explicit X⋯O contacts seem to be preferred by cations with larger charge densities which severely deform the cavity.

Application of Orange Peel Waste as Adsorbent for Methylene Blue and Cd2+ Simultaneous Remediation.

Pollution by dyes and heavy metals is one of the main concerns at the environmental level due to their toxicity and inefficient elimination by traditional water treatment. Orange peel (OP) without any treatment was applied to effectively eliminate methylene blue (MB) and cadmium ions (Cd2+) in mono- and multicomponent systems. Although the single adsorption processes for MB and Cd2+ have been investigated, the effects and mechanisms of interactions among multicomponent systems are still unclear. Batch experiments showed that in monocomponent systems, the maximum adsorption capacities were 0.7824 mmol g-1 for MB and 0.2884 mmol g-1 for Cd2+, while in multicomponent systems (Cd2+ and MB), both contaminants competed for the adsorption sites on OP. Particularly, a synergic effect was observed since the adsorption capacity of Cd2+ increased compared to the monocomponent system. Results of desorption and adsorbent reuse confirmed that the adsorbent presents good regeneration performance. The low cost of this material and its capacity for the individual or simultaneous removal of Cd2+ and MB in aqueous solutions makes it a potential adsorbent for polluted water treatment processes.

To Be or Not To Be? that is the Entropic, Enthalpic, and Molecular Interaction Dilemma in the Formation of (Water)20 Clusters and Methane Clathrate.

A detailed analysis under a comprehensive set of theoretical and computational tools of the thermodynamical factors and of the intermolecular interactions behind the stabilization of a well known set of (water)20 cavities and of the methane clathrate is offered in this work. Beyond the available reports of experimental characterization at extreme conditions of most of the systems studied here, all clusters should be amenable to experimental detection at 1 atm and moderate temperatures since 280 K marks the boundary at which, ignoring reaction paths, formation of all clusters is no longer spontaneous from the 20H2 O→(H2 O)20 and CH4 +20H2 O→CH4 @512 processes. As a function of temperature, a complex interplay leading to the free energy of formation occurs between the destabilizing entropic contributions, mostly due to cluster vibrations, and the stabilizing enthalpic contributions, due to intermolecular interactions and the PV term, is best illustrated by the highly symmetric 512 cage consistently showing signs of stronger intermolecular bonding despite having smaller binding energy than the other clusters. A fluxional wall of attractive non-covalent interactions, arising because of the cumulative effect of a large number of tiny individual charge transfers to the interstitial region, plays a pivotal role stabilizing the CH4 @512 clathrate.

Valorization of potato peels and eggshells wastes: Ca-biocomposite to remove and recover phosphorus from domestic wastewater.

Potato peel (PP) waste are generated in huge quantities, causing environmental pollution and health problems. Therefore, obtaining value-added products from PP is a current research challenge. In this work, novel Ca-biocomposites for phosphorus (P) removal were prepared by pyrolysis (500-800 °C) using eggshell (ES) and PP (ES/PP = 1:2 ratio by weight). ESPP-700 (pyrolyzed at 700 °C), reached a Qmax of 174.8 mg P/g, while the application of Ca-biocomposites in domestic wastewater showed 85.96% of P removal. According to the pseudo-second-order kinetic model, P adsorption was dominated by chemisorption, follows by apatite precipitation. The P solubility (62.5 wt.%) in formic acid (2.0 wt.%) and the water-soluble P (3.2 wt.%) for ESPP-700 after P adsorption, indicated that the final product would work as fertilizer for acidic soils. This is an important step in the management of agricultural wastes to implement the 3R slogan "Reduce, Reuse, Recycle" towards a circular economy.

Unraveling the Ca-P species produced over the time during phosphorus removal from aqueous solution using biocomposite of eggshell-palm mesocarp fiber.

Phosphorus (P) adsorption from aqueous solutions is usually evaluated by monitoring the P concentration and employed kinetic models. In this work, three adsorbents obtained from eggshell (ES) and eggshell mixed with palm mesocarp fiber (ESF-1:1 and ESF-1:10) at different Ca(OH)2/CaCO3 compositions were evaluated, and the Ca-P species formed monitored as a function of time deconvoluting Fourier Transform Infrared (FTIR) spectra. At 0.25 h the ESF-1:10 (Ca(OH)2: 26.2 wt%) exhibited better adsorption performance of 35 mgg-1 while ESF-1:1 and ES (Ca(OH)2: 2.8 and 3.0 wt%) showed 26 and 4 mgg-1, respectively. Characteristic PO43- bands in apatite were corroborated by XRD and FTIR. It was found that the role of Ca(OH)2 in the adsorption ends before 0.25 h, and thereafter CaCO3 becomes the phase responsible for the removal of orthophosphate H2PO4-/HPO42-/PO43- ions. The results indicate a direct ligand exchange of CO32- for PO43- that takes place while increasing the apatite crystallinity. On the other hand, the P adsorption process is also dependent on P concentration. At low P concentrations, characteristic bands of PO43- in apatite were observed in FTIR, while at high concentrations, characteristic bands for adsorbed HPO42- were obtained. The obtained results give a relevant role to CaCO3 in P adsorption. Kinetic analysis for Ca-based biocomposites showed that the Avrami order kinetic model fits better for the adsorbents. For P adsorption isotherm process the Langmuir's isotherms showed a good fit, with a maximum adsorption capacity of 90.8, 134.0, and 67.9 mgg-1 for ES, ESF-1:1, and ESF-1:10, respectively.

Experimental and Theoretical Insights on Methylene Blue Removal from Wastewater Using an Adsorbent Obtained from the Residues of the Orange Industry.

Chemical and thermochemical transformations were performed on orange peel to obtain materials that were characterized and further tested to explore their potential as adsorbents for the removal of methylene blue (MB) from aqueous solutions. The results show the high potential of some of these materials for MB adsorption not only due to the surface area of the resulting substrate but also to the chemistry of the corresponding surface functional groups. Fitting of the kinetic as well as the equilibrium experimental data to different models suggests that a variety of interactions are involved in MB adsorption. The overall capacities for these substrates (larger than 192.31 mg g-1) were found to compare well with those reported for activated carbon and other adsorbents of agro-industrial origin. According to these results and complementary with theoretical study using Density Functional Theory (DFT) approximations, it was found that the most important adsorption mechanisms of MB correspond to: (i) electrostatic interactions, (ii) H-bonding, and (iii) π (MB)-π (biochar) interactions. In view of these findings, it can be concluded that adsorbent materials obtained from orange peel, constitute a good alternative for the removal of MB dye from aqueous solutions.

Evaluating the Removal of the Antibiotic Cephalexin from Aqueous Solutions Using an Adsorbent Obtained from Palm Oil Fiber.

This study aimed to understand the adsorption process of cephalexin (CPX) from aqueous solution by a biochar produced from the fiber residue of palm oil. Scanning electron microscopy, Fourier transform infrared spectroscopy, Boehm titration, and the point of zero charge were used to characterize the morphology and surface functional groups of the adsorbent. Batch tests were carried out to evaluate the effects of the solution pH, temperature, and antibiotic structure. The adsorption behavior followed the Langmuir model and pseudo-second-order model with a maximum CPX adsorption capacity of 57.47 mg g-1. Tests on the thermodynamic behavior suggested that chemisorption occurs with an activation energy of 91.6 kJ mol-1 through a spontaneous endothermic process. Electrostatic interactions and hydrogen bonding represent the most likely adsorption mechanisms, although π-π interactions also appear to contribute. Finally, the CPX removal efficiency of the adsorbent was evaluated for synthetic matrices of municipal wastewater and urine. Promising results were obtained, indicating that this adsorbent can potentially be applied to purifying wastewater that contains trace antibiotics.

Kinetics, isotherms, effect of structure, and computational analysis during the removal of three representative pharmaceuticals from water by adsorption using a biochar obtained from oil palm fiber.

Acetaminophen (ACE), cephalexin (CPX), and valsartan (VAL) are recognized water pollutants, which can be removed by adsorption. Herein, the removal of these pharmaceuticals using a biochar (BP), prepared from oil palm fiber, was tested. It was studied the structural effects of the pharmaceuticals and biochar on the adsorption process supported by experimental and computational results, plus characterizations of the material. The biochar has 76.05 m2 g-1 of surficial area, and carboxylic groups (1.343 mmol g-1) predominantly. The maximum adsorption uptakes were 7.3, 7.9, and 23.85 mg g-1 for ACE, CPX, and VAL, respectively; following pseudo-second-order kinetics. The best pollutants removal was obtained at acidic pH (3.0). Computational analyses indicated that oxygenated groups of BP (able to generate H-bond interactions) influenced the adsorption of pharmaceuticals. It can be remarked that BP is a low-cost adsorbent synthesized easily from wastes, with high feasibility to remove pharmaceutical structures from water.

Understanding mechanisms in the adsorption of lead and copper ions on chili seed waste in single and multicomponent systems: a combined experimental and computational study.

In the current work, a deep study to understand the adsorption phenomena occurring in single and multicomponent systems was conducted by using spectroscopic characterization, and computational tools. The experimental results showed that the adsorption capacity of chili seed is higher for Pb2+ (48 mg/g) than Cu2+ (4.1 mg/g) ions in single systems. However, the adsorption study in multicomponent systems provides important conclusions of the concentration effect of the metal ions, showing a significant antagonistic and competitive effect of both ions under equivalent concentrations of them (qPb2+ is 56% reduced) or high concentration of Pb2+ (qCu2+ is 50% reduced). Computational results correlated well with the experimental ones and evidenced all interactions proposed from spectroscopy results, accounting for the occurrence of complexation and electrostatic mechanisms between metal ions and the surface oxygenated functional groups (hydroxyl, carboxyl, and carboxylate) onto chili seed. Chemistry quantum descriptors supported the reactivity behavior of the chemical species implicated. All results evidenced that Pb2+ and Cu2+ adsorption on chili seed surface is governed by the occurrence of combined ionic exchange, π-interaction, complexation, and electrostatic attraction.

Experimental and computational data set on adsorption of Cr (VI) from water using an activated carbon.

Chromium (Cr) is a widely used metal in metallurgical and chemical industries, whose waste contaminates the surface and groundwater. Cr (VI) is toxic and produces carcinogenic effects owing to its high mobility in water and soil. In this work, computational and experimental studies from the adsorption of Cr(VI) from aqueous solutions on teak wood residues activated with ZnCl2 (AT) are presented. Full interpretation of data can be found in DOI:10.1016/j.jece.2020.103702 [1]. Experimental data were adjusted to Langmuir, Freundlich and Temkin isothermal models and the nonlinear and linear forms of the Pseudo-first and Pseudo-second order kinetic models. Computational data allow to understand the adsorption process of Cr(VI) on carbonaceous materials.

A Comprehensive Picture of the Structures, Energies, and Bonding in [SO4(H2O)n]2-, n = 1-6.

Two stochastic methods in conjunction with ab initio computations were used to explore the potential energy surfaces for the microsolvation of SO42- with up to six explicit water molecules. At least three water molecules are needed to stabilize the Coulomb repulsion that prevents the existence of isolated SO42-. The formal charge in SO42- is strong enough to induce water dissociation and subsequent microsolvation of the resulting HSO4-, OH- ionic pair. Hydrogen bonds characterized as having complex contributions from covalency and from ionicity are at play stabilizing [SO4(H2O)n]2- clusters. Ionicity and covalency act concomitantly rather than opposedly to strengthen both intermolecular interactions and the resulting O-H bond in HSO4- after proton abstraction.