RESUMO
A novel hybrid nanocomposite formed of carboxylated Nano Graphene Oxide (c-NGO), highly densely decorated by monodisperse citrate-coated Au nanoparticles (c-NGO/Au NPs), is synthesized and thoroughly characterized for photothermal applications. A systematic investigation of the role played by the synthetic parameters on the Au NPs decoration of the c-NGO platform is performed, comprehensively studying spectroscopic and morphological characteristics of the achieved nanostructures, thus elucidating their still not univocally explained synthesis mechanism. Remarkably, the Au NPs coating density of the c-NGO sheets is much higher than state-of-the-art systems with analogous composition prepared with different approaches, along with a higher NPs size dispersion. A novel theoretical approach for estimating the average number of NPs per sheet, combining DLS and TEM results, is developed. The assessment of the c-NGO/Au NPs photothermal activity is performed under continuous wave (CW) laser irradiation, at 532 nm and 800 nm, before and after functionalization with PEG-SH. c-NGO/Au NPs composite behaves as efficient photothermal agent, with a light into heat conversion ability higher than that of the single components. The c-NGO/Au NPs compatibility for photothermal therapy is assessed by in vitro cell viability tests, which show no significant effects of c-NGO/Au NPs, as neat and PEGylated, on cell metabolic activity under the investigated conditions. These results demonstrate the great potential held by the prepared hybrid nanocomposite for photothermal conversion technologies, indicating it as particularly promising platform for photothermal ablation of cancer cells.
Assuntos
Nanopartículas Metálicas , Óxidos , Óxidos/farmacologia , Óxidos/química , Ouro/farmacologia , Ouro/química , Linhagem Celular Tumoral , Nanopartículas Metálicas/uso terapêutico , Nanopartículas Metálicas/química , LasersRESUMO
Interfacing intact and metabolically active photosynthetic bacteria with abiotic electrodes requires both establishing extracellular electron transfer and immobilizing the biocatalyst on electrode surfaces. Artificial approaches for photoinduced electron harvesting through redox polymers reported in literature require the separate synthesis of artificial polymeric matrices and their subsequent combination with bacterial cells, making the development of biophotoanodes complex and less sustainable. Herein, we report a one-pot biocompatible and sustainable approach, inspired by the byssus of mussels, that provides bacterial cells adhesion on multiple surfaces under wet conditions to obtain biohybrid photoanodes with facilitated photoinduced electron harvesting. Purple bacteria were utilized as a model organism, as they are of great interest for the development of photobioelectrochemical systems for H2 and NH3 synthesis, biosensing, and bioremediation purposes. The polydopamine matrix preparation strategy allowed the entrapment of active purple bacteria cells by initial oxygenic polymerization followed by electrochemical polymerization. Our results unveil that the deposition of bacterial cells with simultaneous polymerization of polydopamine on the electrode surface enables a 5-fold enhancement in extracellular electron transfer at the biotic/abiotic interface while maintaining the viability of the cells. The presented approach paves the way for a more sustainable development of biohybrid photoelectrodes.
RESUMO
Due to their properties, snail slime-based products have been appreciated and used worldwide. So, as an alternative and innovative use of snail slime, it was adopted to induce gold nanoparticles' formation, conferring them interesting properties. By a simple, one-pot, and eco-friendly approach, 14 ± 6 nm wide hybrid gold nanoparticles, having an inorganic metallic core decorated by the slime's main components, were obtained. Among their several properties, their antioxidant and tyrosinase inhibition activity were investigated through the DPPH and ABTS and the tyrosinase assays, respectively. After assessing their non-cytotoxicity in our previous work, the results revealed positive responses, enabling their use as a potential novel multifunctional ingredient in cosmetics. Interestingly, the gold nanoparticle photostability, investigated by means of a solar simulator lamp, suggests using them in commercial cosmetic sunscreen products as a potential alternative to the commonly used inorganic sunscreen ingredients. The theoretical Sun Protection Factor was evaluated, obtaining values in the range 0-12. The proposed environmentally friendly and cost-effective protocol for nanoparticle synthesis, following the principles of Green Chemistry, opens a hugely attractive space toward the study of snail slime-based gold nanoparticles as a potential multipurpose platform in cosmetics.
Assuntos
Antioxidantes/farmacologia , Cosméticos/química , Inibidores Enzimáticos/farmacologia , Ouro/química , Nanopartículas Metálicas/química , Monofenol Mono-Oxigenase/antagonistas & inibidores , Muco , Caramujos , Protetores Solares/farmacologia , AnimaisRESUMO
Mesoporous silica nanostructures (MSNs) attract high interest due to their unique and tunable physical chemical features, including high specific surface area and large pore volume, that hold a great potential in a variety of fields, i.e., adsorption, catalysis, and biomedicine. An essential feature for biomedical application of MSNs is limiting MSN size in the sub-micrometer regime to control uptake and cell viability. However, careful size tuning in such a regime remains still challenging. We aim to tackling this issue by developing two synthetic procedures for MSN size modulation, performed in homogenous aqueous/ethanol solution or two-phase aqueous/ethyl acetate system. Both approaches make use of tetraethyl orthosilicate as precursor, in the presence of cetyltrimethylammonium bromide, as structure-directing agent, and NaOH, as base-catalyst. NaOH catalyzed syntheses usually require high temperature (>80 °C) and large reaction medium volume to trigger MSN formation and limit aggregation. Here, a successful modulation of MSNs size from 40 up to 150 nm is demonstrated to be achieved by purposely balancing synthesis conditions, being able, in addition, to keep reaction temperature not higher than 50 °C (30 °C and 50 °C, respectively) and reaction mixture volume low. Through a comprehensive and in-depth systematic morphological and structural investigation, the mechanism and kinetics that sustain the control of MSNs size in such low dimensional regime are defined, highlighting that modulation of size and pores of the structures are mainly mediated by base concentration, reaction time and temperature and ageing, for the homogenous phase approach, and by temperature for the two-phase synthesis. Finally, an in vitro study is performed on bEnd.3 cells to investigate on the cytotoxicity of the MNSs.
RESUMO
Liposomes are consolidated and attractive biomimetic nanocarriers widely used in the field of drug delivery. The structural versatility of liposomes has been exploited for the development of various carriers for the topical or systemic delivery of drugs and bioactive molecules, with the possibility of increasing their bioavailability and stability, and modulating and directing their release, while limiting the side effects at the same time. Nevertheless, first-generation vesicles suffer from some limitations including physical instability, short in vivo circulation lifetime, reduced payload, uncontrolled release properties, and low targeting abilities. Therefore, liposome preparation technology soon took advantage of the possibility of improving vesicle performance using both natural and synthetic polymers. Polymers can easily be synthesized in a controlled manner over a wide range of molecular weights and in a low dispersity range. Their properties are widely tunable and therefore allow the low chemical versatility typical of lipids to be overcome. Moreover, depending on their structure, polymers can be used to create a simple covering on the liposome surface or to intercalate in the phospholipid bilayer to give rise to real hybrid structures. This review illustrates the main strategies implemented in the field of polymer/liposome assembly for drug delivery, with a look at the most recent publications without neglecting basic concepts for a simple and complete understanding by the reader.
RESUMO
Efficient FRET systems are developed combining colloidal CdSe quantum dots (QDs) donors and BODIPY acceptors. To promote effective energy transfer in FRET architectures, the distance between the organic fluorophore and the QDs needs to be optimized by a careful system engineering. In this context, BODIPY dyes bearing amino-terminated functionalities are used in virtue of the high affinity of amine groups in coordinating the QD surface. A preliminary QD surface treatment with a short amine ligand is performed to favor the interaction with the organic fluorophores in solution. The successful coordination of the dye to the QD surface, accomplishing a short donor-acceptor distance, provides effective energy transfer already in solution, with efficiency of 76 %. The efficiency further increases in the solid state where the QDs and the dye are deposited as single coordinated units from solution, with a distance between the fluorophores down to 2.2â nm, demonstrating the effectiveness of the coupling strategy.
RESUMO
The aim of this paper is to present and characterize Polyamidoamine-based hydrogels (PAA) as scaffolds to host photoactive Chlorophyll a (Chl a) from Spirulina (Arthrospira platensis) sea-weed Extract (SE), for potential applications in Photodynamic Therapy (PDT). The pigment extracted from SE was blended inside PAA without further purification, according to Green Chemistry principles. A comprehensive investigation of this hybrid platform, PAA/SE-based, was thus performed in our laboratory and, by means of Visible absorption and emission spectroscopies, the Chl a features, stability and photoactivity were studied. The obtained results evidenced the presence of two main Chl a forms, monomeric and dimeric, interacting with hydrogel polyamidoamines network. To better understand the nature of this interaction, the spectroscopic investigation of this system was performed both before and after the solidification of the hydrogel, that occurred at least in 24 h. Then, focusing the attention on solid scaffold, the 1Chl aâ fluorescence lifetime and FTIR-ATR analyses of PAA/SE were carried out, confirming the findings. The swelling and Point Zero Charge (PZC) measurements of solid PAA and PAA/SE were additionally performed to investigate the hydrogel behavior in water. Chl a molecules blended in PAA were (photo) stable and photoactive, and this latter feature was demonstrated showing that the pigment induced, when swelled in water and under irradiation, the formation of singlet oxygen (1O2), measured by direct and indirect methods.
Assuntos
Fotoquimioterapia , Spirulina , Clorofila , Clorofila A , Hidrogéis , Extratos Vegetais/farmacologia , PoliaminasRESUMO
Carbon dots (CDs) have been progressively attracting interest as novel environmentally friendly and cost-effective luminescent nanoparticles, for implementation in light-emitting devices, solar cells, photocatalytic devices and biosensors. Here, starting from a cost-effective bottom-up synthetic approach, based on a suitable amphiphilic molecule as carbon precursor, namely cetylpyridinium chloride (CPC), green-emitting CDs have been prepared at room temperature, upon treatment of CPC with concentrated NaOH solutions. The investigated method allows the obtaining, in one-pot, of both water-dispersible (W-CDs) and oil-dispersible green-emitting CDs (O-CDs). The study provides original insights into the chemical reactions involved in the process of the carbonization of CPC, proposing a reliable mechanism for the formation of the O-CDs in an aqueous system. The ability to discriminate the contribution of different species, including molecular fluorophores, allows one to properly single out the O-CDs emission. In addition, a mild heating of the reaction mixture, at 70 °C, has demonstrated the ability to dramatically decrease the very long reaction time (i.e. from tens of hours to days) at room temperature, allowing us to synthesize O-CDs in a few tens of minutes while preserving their morphological and optical properties.
RESUMO
Efforts are made to perform an early and accurate detection of hepatocellular carcinoma (HCC) by simultaneous exploiting multiple clinically non-invasive imaging modalities. Original nanostructures derived from the combination of different inorganic domains can be used as efficient contrast agents in multimodal imaging. Superparamagnetic iron oxide nanoparticles (SPIONs) and Au nanoparticles (NPs) possess well-established contrasting features in magnetic resonance imaging (MRI) and X-ray computed tomography (CT), respectively. HCC can be targeted by using specific carbohydrates able to recognize asialoglycoprotein receptor 1 (ASGPR1) overexpressed in hepatocytes. Here, two different thiocarbohydrate ligands were purposely designed and alternatively conjugated to the surface of Au-speckled silica-coated SPIONs NPs, to achieve two original nanostructures that could be potentially used for dual mode targeted imaging of HCC. The results indicated that the two thiocarbohydrate decorated nanostructures possess convenient plasmonic/superparamagnetic properties, well-controlled size and morphology and good selectivity for targeting ASGPR1 receptor.
Assuntos
Receptor de Asialoglicoproteína/metabolismo , Carboidratos/química , Carcinoma Hepatocelular/diagnóstico por imagem , Ouro , Nanopartículas Magnéticas de Óxido de Ferro/química , Nanopartículas Metálicas/química , Dióxido de Silício , Compostos de Sulfidrila/química , Humanos , Neoplasias Hepáticas/diagnóstico por imagem , Imageamento por Ressonância MagnéticaRESUMO
Fabrication of heterostructures by merging two or more materials in a single object. The domains at the nanoscale represent a viable strategy to purposely address materials' properties for applications in several fields such as catalysis, biomedicine, and energy conversion. In this case, solution-phase seeded growth and the hot-injection method are ingeniously combined to fabricate TiO2/PbS heterostructures. The interest in such hybrid nanostructures arises from their absorption properties that make them advantageous candidates as solar cell materials for more efficient solar light harvesting and improved light conversion. Due to the strong lattice mismatch between TiO2 and PbS, the yield of the hybrid structure and the control over its properties are challenging. In this study, a systematic investigation of the heterostructure synthesis as a function of the experimental conditions (such as seeds' surface chemistry, reaction temperature, and precursor concentration), its topology, structural properties, and optical properties are carried out. The morphological and chemical characterizations confirm the formation of small dots of PbS by decorating the oleylamine surface capped TiO2 nanocrystals under temperature control. Remarkably, structural characterization points out that the formation of heterostructures is accompanied by modification of the crystallinity of the TiO2 domain, which is mainly ascribed to lattice distortion. This result is also confirmed by photoluminescence spectroscopy, which shows intense emission in the visible range. This originated from self-trapped excitons, defects, and trap emissive states.
Assuntos
Chumbo/química , Pontos Quânticos/química , Sulfetos/química , Titânio/química , Nanopartículas/ultraestrutura , Energia Solar , Propriedades de SuperfícieRESUMO
This paper accounts the first example about the development of a self-assembled supramolecular system based on the use of green-synthetized gold nanoparticles (AuNPs) and chitosan (CH), for solubilizing ellagic acid (EA) in water. AuNPs were synthetized by using Punica granatum Juice (PGJ) and, after their synthesis, in order to adsorb ellagic acid on the nanoparticles surface (AuNPs/CH/EA), the chitosan wrapping was performed (AuNPs/CH). For this purpose, chitosan having high viscosity, low and medium molecular weights were used and compared to check the best condition of work. The stability of the proposed system, before and after the addition of ellagic acid, under different conditions of work, i.e. solution pH, temperature and light irradiation were investigated demonstrating the stability of the proposed functional ingredient. The supramolecular system exhibited wide ranging properties such as antioxidant, skin lightening and sunscreen. More specifically, the % of antioxidant activity occurred around 80% and 60% from the DPPH and ABTS assays respectively; the tyrosinase inhibition was around of 50% and the Sun Protection Factor was found to be 20. Thanks to the multi-properties of the proposed functional ingredient it should exhibit several advantageous in cosmetic applications. The ingredient could be a valid alternative to the traditional nanostructured TiO2 and ZnO offering the possibility to have at the same time several properties due to the use of AuNPs (having light absorption and scattering ability, are biocompatible showing low toxicity) and EA. If these positive aspects are associated with the use of an eco-friendly and low-cost protocol for AuNPs synthesis, according to the Green Chemistry principles, a great interesting space is opened towards the study of PGJ-based AuNPs, as multifunctional platform in cosmetic.
Assuntos
Antioxidantes/química , Quitosana/química , Ácido Elágico/química , Ouro/química , Química Verde/métodos , Nanopartículas Metálicas/químicaRESUMO
This paper focuses on the removal of tetracycline from polluted water by chitosan-olive pomace adsorbing films. More specifically, both raw olive solid wastes (olive pomace) and the olive solid wastes/chitosan composite were compared and used for this purpose. Adsorption capacities values of 16â¯mgâ¯×â¯g-1 and 1.6â¯mgâ¯×â¯g-1 were obtained for the two adsorbents respectively. However, chitosan/olive pomace is proposed as suitable for environmental applications avoiding the dispersion of the pomace blocked inside the chitosan film. To detail the adsorption process, the effect of several experimental parameters such as the pH values, ionic strength, amount of adsorbent and pollutant and temperature values was investigated. The results showed that the adsorption process improved increasing the pH values, with a maximum at pHâ¯8, and it was negatively affected by the presence of salts that retarded the adsorption. Indeed, the desorption of tetracycline was obtained in a MgCl2 2â¯M solution. So, a low-cost and cleaner approach, fundamental for the pollutant recovery and for an adsorbent safe reuse, for several cycles of adsorption/desorption, transforming a waste in resource is presented. The kinetics, isotherms models of adsorption and the thermodynamic parameters (ΔG°, ΔH° and ΔS°) were also evaluated observing that the physisorption of the pollutant occurred with and an endothermic character (ΔH°â¯>â¯0) with ΔG°â¯<â¯0 and ΔS°â¯>â¯0. The use of Advanced Oxidation Processes was proposed as possible alternative to the tetracycline recovery, obtaining its degradation after the desorption. With the present paper, the alternative reuse of olive pomace is reported avoiding its disposal in the environment claiming its potential in the removal/recover of emerging contaminants from water.
Assuntos
Tetraciclina/química , Eliminação de Resíduos Líquidos/métodos , Poluentes Químicos da Água/química , Adsorção , Quitosana , Resíduos Industriais , Cinética , Olea , Tetraciclina/análise , Termodinâmica , Poluentes Químicos da Água/análise , Poluição da Água , Purificação da Água/métodosRESUMO
This paper reported the first example on the use of chitosan films, without further modification, to remove and recover, through bio-sorption processes, the emerging pollutant Diclofenac from water. The latter was adopted as a model, among non-steroidal anti-inflammatory drugs, by obtaining a maximum adsorption capacity, qmax, on chitosan of about 10 mg/g, under the applied experimental conditions of work. The literature gap about the use of chitosan films, which was already used for dyes and heavy metals removal, to adsorb emerging pollutants from water was covered, claiming the wide range application of chitosan films to remove a different class of pollutants. Several parameters affecting the Diclofenac adsorption process, such as the pH and ionic strength of solutions containing Diclofenac, the amount of the bio-sorbent and pollutant, and the temperature values, were investigated. The kinetics and the adsorption isotherms, along with the thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were also evaluated. The process occurred very efficiently, and Chitosan/Diclofenac amounts dependent, remove about the 90% of the pollutant, in 2 h, from the tested solutions, through electrostatic interaction involving the carboxylic moiety of Diclofenac and Chitosan amino groups. This finding was confirmed by the pH and salt effects on the bio-sorption process, including swelling measurements of Chitosan films and by FTIR-ATR analysis. In detail, the maximum adsorption was observed at pH 5, when pollutant and Chitosan were negatively and positively charged, respectively. By reducing or increasing the pH around this value, a reduced affinity was observed. Accordingly, the presence of salts retarded the Diclofenac removal screening its charges, which hinders the interaction with Chitosan. The sorption was spontaneous (ΔG° < 0) and endothermic (ΔH° > 0) following the pseudo-second order kinetic model. The process was Diclofenac and Chitosan amount dependent. In addition, the Freundlich and Temkin isotherms well described the process, which showed the heterogeneous character of the process. Experiments of the complete desorption were also performed by using NaCl solutions 0.25 M (like sea water salt concentration) proposing the reuse of the pollutant and the recycling of the bio-sorbent lowering the associated costs. The versatility of the adsorbent was reported by exploring the possibility to induce the Diclofenac light-induced degradation after the adsorption and by-products adsorption onto chitosan films. To emphasize the chitosan capacity of treating water, the removal of another pollutant such as Ketoprofen and the mixture of Diclofenac and Ketoprofen were investigated. In this way, a green and eco-friendly production-pollution prevention technology for removing emerging pollutants from water was presented, which reduced the overall environmental impact. This illustrated experiments both in static and dynamic conditions for potential industrial applications.
Assuntos
Quitosana/química , Diclofenaco/análise , Cetoprofeno/análise , Águas Residuárias/química , Adsorção , Concentração de Íons de Hidrogênio , Resíduos Industriais , Espectroscopia de Infravermelho com Transformada de Fourier , Purificação da ÁguaRESUMO
Increasing environmental concern, related to pollution and clean energy demand, have urged the development of new smart solutions profiting from nanotechnology, including the renowned nanomaterial-assisted photocatalytic degradation of pollutants. In this framework, increasing efforts are devoted to the development of TiO2-based nanomaterials with improved photocatalytic activity. A plethora of synthesis routes to obtain high quality TiO2-based nanomaterials is currently available. Nonetheless, large-scale production and the application of nanosized TiO2 is still hampered by technological issues and the high cost related to the capability to obtain TiO2 nanoparticles with high reaction yield and adequate morphological and structural control. The present review aims at providing a selection of synthetic approaches suitable for large-scale production of mesoporous TiO2-based photocatalysts due to its unique features including high specific surface area, improved ultraviolet (UV) radiation absorption, high density of surface hydroxyl groups, and significant ability for further surface functionalization The overviewed synthetic strategies have been selected and classified according to the following criteria (i) high reaction yield, (ii) reliable synthesis scale-up and (iii) adequate control over morphological, structural and textural features. Potential environmental applications of such nanostructures including water remediation and air purification are also discussed.
RESUMO
The photosynthetic Reaction Center (RC) from the purple bacterium Rhodobacter sphaeroides has unique photoconversion capabilities, that can be exploited in assembly biohybrid devices for applications in solar energy conversion. Extending the absorption cross section of isolated RC through covalent functionalization with ad-hoc synthesized artificial antennas is a successful strategy to outperform the efficiency of the pristine photoenzyme under visible light excitation. Here we report a new heptamethine cyanine antenna that, upon covalent binding to RC, forms a biohybrid (hCyN7-RC) which, under white light excitation, has doubled photoconversion efficiency versus the bare photoenzyme. The artificial antenna hCyN7 successfully meets appropriate optical properties, i.e. peak position of absorption and emission maximum in the visible and NIR region respectively, large Stokes shift, and high fluorescence quantum yield, required for improving the efficiency of the biohybrid in the production of the charge-separated state in the RC. The kinetics of energy transfer and charge separation of hCyN7-RC studied via ultrafast visible and IR spectroscopies are here presented. The antenna transfers energy to RC chromophores within <10â¯ps and the rate of QA reduction is doubled compared to the native RC. These experiments further demonstrate hCyN7-RC, besides being an extremely efficient white light photoconverter, fully retains the charge separation mechanism and integrity of the native RC photoenzyme, thus allowing to envisage its suitability as biohybrid material in bioinspired systems for solar energy conversion.
Assuntos
Proteínas de Bactérias/química , Fluorescência , Complexos de Proteínas Captadores de Luz/química , Luz , Rhodobacter sphaeroides/enzimologia , Proteínas de Bactérias/metabolismo , Transferência de Energia , Complexos de Proteínas Captadores de Luz/metabolismoRESUMO
The reactivity of the sulfur-containing nucleoside 4-thio-(2'-deoxy)-thymidine usually abbreviated as 4-thio-thymidine, (S4 -TdR) under Fenton conditions, ie, in the presence of H2 O2 and catalytic amounts of Fe(II), was investigated by UV-vis spectroscopy and electrospray ionization single and tandem mass spectrometry (ESI-MS and MS/MS). S4 -TdR hydroxylated on the S atom was found to be a key reaction intermediate, ultimately leading to (2'-deoxy)-thymidine usually abbreviated as thymidine, (TdR) as the main reaction product. This finding was in accordance with the outcome of the reaction between S4 -TdR and H2 O2 , previously investigated in our laboratory. On the other hand, the additional presence of â¢OH radicals, induced by the Fe(II)/H2 O2 combination, led to the increased generation of another interesting S4 -TdR product, already observed after its reaction with H2 O2 alone, ie, the covalent dimer including a SS bridge between two S4 -TdR molecules. More importantly, multihydroxylated derivatives of S4 -TdR and TdR were detected as peculiar products obtained under Fenton conditions. Among them, a product bearing an OH group both on the methyl group linked to the thymine ring and on the C5 atom of the ring was found to prevail. The results obtained during this study, integrated by those found previously in our laboratory, indicate 4-thiothymidine as a promising molecular probe for the recognition, through a careful characterization of its reaction products, of the prevailing species among reactive oxygen species (ROS) corresponding to singlet-state oxygen, hydrogen peroxide, and hydroxylic radical.
RESUMO
A novel hybrid nanocomposite formed by RGO flakes, surface functionalized by 1-pyrene carboxylic acid (PCA), densely and uniformly in situ decorated by Au NPs, that are concomitantly coordinated by the PCA carboxylic group, and by an aromatic thiol used as the reducing agent in the synthesis, both ensuring, at the same time, a stable non-covalent NPs anchorage to the RGO flakes, and an efficient interparticle electron coupling along the NP network onto the RGO, is reported. The obtained solution processable hybrid material is used to modify Screen-Printed Carbon Electrodes (SPCEs). The hybrid modified SPCEs, functionalized with a thiolated DNA capture probe, are tested in a streptavidin-alkaline-phosphatase catalyzed assay, for the detection of the biotinylated miRNA-221, and for its determination in spiked human blood serum samples. The proposed genosensor demonstrates a high sensitivity (LOD of 0.7 pM), attesting for a performance comparable with the most effective reported sensors. The enhanced sensitivity is explained in terms of the very fast heterogeneous electron transfer kinetics, the concomitant decrease of the electron transfer resistance at the electrode/electrolyte interface, the high electroactivity and the high surface area of the nanostructured hybrid modified SPCEs that provide a convenient platform for nucleic acid biosensing.
Assuntos
Técnicas Biossensoriais/métodos , Técnicas Eletroquímicas/métodos , Ouro , Nanopartículas Metálicas/química , Nanocompostos/química , Técnicas Biossensoriais/normas , Sondas de DNA , Técnicas Eletroquímicas/normas , Eletrodos , Grafite , Humanos , Limite de Detecção , MicroRNAs/sangue , Sensibilidade e EspecificidadeRESUMO
The adsorption at cell surfaces and cell internalization of two drug delivery lipid based nanovectors has been investigated by means of Field Emission Scanning Electron Microscopy (FE-SEM) operating at low beam voltage on two different colon carcinoma cell lines, CaCo-2 and CoLo-205, that were compared with the M14 melanoma cell line, as a reference. The cells were incubated with the investigated multifunctional nanovectors, based on liposomes and magnetic micelles loaded with 5-fluorouracil, as a chemotherapeutic agent, and a FE-SEM systematic investigation was performed, enabling a detailed imaging of any morphological changes of the drug exposed cells as a function of time. The results of the FE-SEM investigation were validated by MTS assay and immunofluorescence staining of the Ki-67 protein performed on the investigated cell lines at different times. The two nanoformulations resulted in a comparable effect on CaCo-2 and M14 cell lines, while for CoLo 205 cells, the liposomes provided an cytotoxic activity higher than that observed in the case of the micelles. The study highlighted the high potential of FE-SEM as a valuable complementary technique for imaging and monitoring in time the drug effects on the selected cells exposed to the two different nanoformulations.
RESUMO
The surface of gold nanorods (Au NRs) has been appropriately engineered to achieve a suitable interface for bioconjugation with horse heart cytochrome c (HCc). HCc, an extensively studied and well-characterized protein, represents an ideal model for nanoparticle (NP)-protein conjugation studies because of its small size, high stability, and commercial availability. Here, the native state of the protein has been demonstrated for the first time, by means of Raman spectroscopy, to be retained upon conjugation with the anisotropic Au nanostructures, thus validating the proposed protocol as specifically suited to mostly preserve the plasmonic properties of the NRs and to retain the structure of the protein. The successful creation of such bioconjugates with the retention of the protein structure and function along with the preservation of the NP properties represents a challenging but essential task, as it provides the only way to access functional hybrid systems with potential applications in biotechnology, medicine, and catalysis. In this perspective, the organic capping surrounding the Au NRs plays a key role, as it represents the functional interface for the conjugation step. Cetyltrimethylammonium bromide-coated Au NRs, prepared by using a seed-mediated synthetic route, have been wrapped with polyacrylic acid (PAA) by means of electrostatic interactions following a layer-by-layer approach. The resulting water-dispersible negatively charged AuNRs@PAA NPs have then been electrostatically bound to the positively charged HCc. The bioconjugation procedure has been thoroughly monitored by the combined analysis of UV-vis absorption, resonance Raman and Fourier transform infrared spectroscopies, transmission electron microscopy microscopy, and ζ-potential, which verified the successful conjugation of the protein to the nanorods.