RESUMO
Mining uranium from seawater is highly desirable for sustaining the increasing demand for nuclear fuel; however, access to this unparalleled reserve has been limited by competitive adsorption of a wide variety of concentrated competitors, especially vanadium. Herein, we report the creation of a series of uranyl-specific "hooks" and the decoration of them into the nanospace of porous organic polymers to afford uranium nanotraps for seawater uranium extraction. Manipulating the relative distances and angles of amidoxime moieties in the ligands enabled the creation of uranyl-specific "hooks" that feature ultrahigh affinity and selective sequestration of uranium with a distribution coefficient threefold higher compared to that of vanadium, overcoming the long-term challenge of the competing adsorption of vanadium for uranium extraction from seawater. The optimized uranium nanotrap (2.5 mg) can extract more than one-third of the uranium in seawater (5 gallons), affording an enrichment index of 3836 and thus presenting a new benchmark for uranium adsorbent. Moreover, with improved selectivity, the uranium nanotraps could be regenerated using a mild base treatment. The synergistic combination of experimental and theoretical analyses in this study provides a mechanistic approach for optimizing the selectivity of chelators toward analytes of interest.
RESUMO
Preorganization is a basic design principle used by nature that allows for synergistic pathways to be expressed. Herein, a full account of the conceptual and experimental development from randomly distributed functionalities to a convergent arrangement that facilitates cooperative binding is given, thus conferring exceptional affinity toward the analyte of interest. The resulting material with chelating groups populated adjacently in a spatially locked manner displays up to two orders of magnitude improvement compared to a random and isolated manner using uranium sequestration as a model application. This adsorbent shows exceptional extraction efficiencies, capable of reducing the uranium concentration from 5 ppm to less than 1 ppb within 10 min, even though the system is permeated with high concentrations of competing ions. The efficiency is further supported by its ability to extract uranium from seawater with an uptake capability of 5.01 mg g-1, placing it among the highest-capacity seawater uranium extraction materials described to date. The concept presented here uncovers a new paradigm in the design of efficient sorbent materials by manipulating the spatial distribution to amplify the cooperation of functions.
RESUMO
A photoactive porphyrinic metal-organic framework (MOF) has been prepared by exchanging Ti into a Zr-based MOF precursor. The resultant mixed-metal Ti/Zr porphyrinic MOF demonstrates much-improved efficiency for gas-phase CO2 photoreduction into CH4 and CO under visible-light irradiation using water vapor compared to the parent Zr-MOF. Insightful studies have been conducted to probe the photocatalysis processes. This work provides the first example of gas-phase CO2 photoreduction into methane without organic sacrificial agents on a MOF platform, thereby paving an avenue for developing MOF-based photocatalysts for application in CO2 photoreduction and other types of photoreactions.
RESUMO
To offset the environmental impact of platinum-group element (PGE) mining, recycling techniques are being explored. Porous organic polymers (POPs) have shown significant promise owing to their selectivity and ability to withstand harsh conditions. A series of pyridine-based POP nanotraps, POP-Py, POP-pNH2 -Py, and POP-oNH2 -Py, have been designed and systematically explored for the capture of palladium, one of the most utilized PGEs. All of the POP nanotraps demonstrated record uptakes and rapid capture, with the amino group shown to be vital in improving performance. Further testing on the POP nanotrap regeneration and selectivity found that POP-oNH2 -Py outperformed POP-pNH2 -Py. Single-crystal X-ray analysis indicated that POP-oNH2 -Py provided a stronger complex compared to POP-pNH2 -Py owing to the intramolecular hydrogen bonding between the amino group and coordinated chlorine molecules. These results demonstrate how slight modifications to adsorbents can maximize their performance.
RESUMO
The Industrial Revolution has resulted in social and economic improvements, but unfortunately, with the development of manufacturing and mining, water sources have been pervaded with contaminants, putting Earth's freshwater supply in peril. Therefore, the segregation of pollutants-such as radionuclides, heavy metals, and oil spills-from water streams, has become a pertinent problem. Attempts have been made to extract these pollutants through chemical precipitation, sorbents, and membranes. The limitations of the current remediation methods, including the generation of a considerable volume of chemical sludge as well as low uptake capacity and/or selectivity, actuate the need for materials innovation. These insufficiencies have provoked our interest in the exploration of porous organic polymers (POPs) for water treatment. This category of porous material has been at the forefront of materials research due to its modular nature, i.e., its tunable functionality and tailorable porosity. Compared to other materials, the practicality of POPs comes from their purely organic composition, which lends to their stability and ease of synthesis. The potential of using POPs as a design platform for solid extractors is closely associated with the ease with which their pore space can be functionalized with high densities of strong adsorption sites, resulting in a material that retains its robustness while providing specified interactions depending on the contaminant of choice.POPs raise opportunities to improve current or enable new technologies to achieve safer water. In this Account, we describe some of our efforts toward the exploitation of the unique properties of POPs for improving water purification by answering key questions and proposing research opportunities. The design strategies and principles involved for functionalizing POPs include the following: increasing the density and flexibility of the chelator to enhance their cooperation, introducing the secondary sphere modifiers to reinforce the primary binding, and enforcing the orientation of the ligands in the pore channel to increase the accessibility and cooperation of the functionalities. For each strategy, we first describe its chemical basis, followed by presenting examples that convey the underlying concepts, giving rise to functional materials that are beyond the traditional ones, as demonstrated by radionuclide sequestration, heavy metal decontamination, and oil-spill cleanup. Our endeavors to explore the applicability of POPs to deal with these high-priority contaminants are expected to impact personal consumer water purifiers, industrial wastewater management systems, and nuclear waste management. In our view, more exciting will be new applications and new examples of the functionalization strategies made by creatively merging the strategies mentioned above, enabling increasingly selective binding and efficiency and ultimately promoting POPs for practical applications to enhance water security.
RESUMO
The rapid development of supramolecular chemistry provides a powerful bottom-up approach to construct various well-defined nano-architectures with increasing complexity and functionality. Compared to that of small and simple nanometric objects, the self-assembly of larger and more complex nanometric objects, such as nanocages, remains a significant challenge. Herein, we used a discrete nanocage as the monomer to successfully construct a novel three-dimensional (3D) supramolecular architecture, which comprises two types of nanocage building units with different connectivity, using the solvent-assisted coordination-driven assembly approach. The mechanism of this supramolecular assembly process was investigated by electrospray ionization mass spectrometry (ESI-MS) studies, which identified for the first time the formation of a nanocage dimer intermediate during the assembly process. The assembly of discrete nanocages into a 3D supramolecular architecture led to remarkable enhancement of stability and gas adsorption properties.
RESUMO
To move nuclear as a primary energy source, uranium resources must be secured beyond what terrestrial reserves can provide. Given the vast quantity of uranium naturally found in the ocean, adsorbent materials have been investigated to recover this vital fuel source. Amidoxime (AO) has been found to be the state-of-the-art functional group for this purpose, however, improvements must still be made to overcome the issues with selectively capturing uranium at such a low concentration found in the ocean. Herein, we report PAF-1 as a platform to study the effects of two amidoxime ligands. The synthesized adsorbents, PAF-1-CH2NHAO and PAF-1-NH(CH2)2AO, with varying chain lengths and grafting degrees, were investigated for their uranium uptakes and kinetic efficiency. PAF-1-NH(CH2)2AO was found to outperform PAF-1-CH2NHAO, with a maximum uptake capacity of 385 mg/g and able to reduce a uranium-spiked solution to ppb level within 10 min. Further studies with PAF-1-NH(CH2)2AO demonstrated effective elution for multiple adsorption cycles and showed promising results for uranium recovery in the diverse composition of a spiked seawater solution. The work presented here moves forward design principles for amidoxime-functionalized ligands and provides scope for strategies to enhance the capture of uranium as a sustainable nuclear fuel source.
RESUMO
Precise control of the outer-sphere environment around the active sites of heterogeneous catalysts to modulate the catalytic outcomes has long been a challenge. Here, we demonstrate how this can be fulfilled by encapsulating catalytic components into supramolecular capsules, used as building blocks for materials synthesis, whereby the microenvironment of each active site is tuned by the assembled wall. Specifically, using a cationic template equipped with a polymerizable functionality, anionic ligands can be encapsulated by ion pair-directed supramolecular assembly, followed by construction into porous frameworks. The hydrophilic ionic wall enables reactions to be achieved in water that usually requires organic solvents and also facilitates the enrichment of the substrate into the hydrophobic pocket, leading to superior catalytic performances as demonstrated by the industrially relevant hydroformylation. Remarkably, the formation of the supramolecular assembly and catalyst encapsulation further engenders reaction selectivity, which reaches an even greater extent after construction of the porous framework.
RESUMO
A squaramide-decorated COF was synthesized and used as a highly efficient heterogeneous catalyst for hydrogen-bonding organocatalysis as exemplified in the context of catalyzing Michael addition reactions under mild conditions. Our work lays a foundation for the development of functional COFs as a new platform for biomimetic organocatalysis.
RESUMO
The elimination of specific contaminants from competitors poses a significant challenge. Rather than relying on a single direct interaction, the cooperation of multiple functionalities is an emerging strategy for adsorbents design to achieve the required affinity. Here, we describe that the interaction with the target species can be altered by modifying the local environment of the direct contact site, as demonstrated by manipulating the affinity of pyridinium-based anion nanotraps toward pertechnetate. Systematic control of the substituent effect allows the resulting anion nanotraps to combine multiple features, overcoming the long-term challenge of TcO4- segregation under extreme conditions of super acidity and basicity, strong irradiation field, and high ionic strength. The top material exhibits the highest sorption capacity together with record-high extraction efficiencies after a single treatment from conditions relevant to the used nuclear fuel (Hanford tank wastes, 95%) and legacy nuclear wastes (Savannah River Sites, 80%) among materials reported thus far.
RESUMO
Herein, we show how the spatial environment in the functional pores of covalent organic frameworks (COFs) can be manipulated in order to exert control in catalysis. The underlying mechanism of this strategy relies on the placement of linear polymers in the pore channels that are anchored with catalytic species, analogous to outer-sphere residue cooperativity within the active sites of enzymes. This approach benefits from the flexibility and enriched concentration of the functional moieties on the linear polymers, enabling the desired reaction environment in close proximity to the active sites, thereby impacting the reaction outcomes. Specifically, in the representative dehydration of fructose to produce 5-hydroxymethylfurfural, dramatic activity and selectivity improvements have been achieved for the active center of sulfonic acid groups in COFs after encapsulation of polymeric solvent analogues 1-methyl-2-pyrrolidinone and ionic liquid.
RESUMO
Frustrated Lewis pairs (FLPs) have recently been advanced as efficient metal-free catalysts for catalytic hydrogenation, but their performance in chemoselective hydrogenation, particularly in heterogeneous systems, has not yet been achieved. Herein, we demonstrate that, via tailoring the pore environment within metal-organic frameworks (MOFs), FLPs not only can be stabilized but also can develop interesting performance in the chemoselective hydrogenation of α,ß-unsaturated organic compounds, which cannot be achieved with FLPs in a homogeneous system. Using hydrogen gas under moderate pressure, the FLP anchored within a MOF that features open metal sites and hydroxy groups on the pore walls can serve as a highly efficient heterogeneous catalyst to selectively reduce the imine bond in α,ß-unsaturated imine substrates to afford unsaturated amine compounds.
RESUMO
Achieving high-performance biocomposites requires knowledge of the compatability between the immobilized enzyme and its host material. The modular nature of covalent organic frameworks (COFs), as a host, allows their pore geometries and chemical functionalities to be fine-tuned independently, permitting comparative studies between the individual parameters and the performances of the resultant biocomposites. This research demonstrates that dual pores in COFs have profound consequences on the catalytic activity and denaturation of infiltrated enzymes. This approach enforces a constant pore environment by rational building-block design, which enables it to be unequivocally determined that pore heterogeneity is responsible for rate enhancements of up to threefold per enzyme molecule. More so, the enzyme is more tolerant to detrimental by-products when occupying the larger pore in a dual-pore COF compared to a corresponding uniform porous COF. Kinetic studies highlight that pore heterogeneity facilitates mass transfer of both reagents and products. This unparalleled versatility of these materials allows many different aspects to be designed on demand, lending credence to their prospect as next-generation host materials for various enzyme biocomposites catalysts.
Assuntos
Materiais Biocompatíveis/química , Enzimas Imobilizadas/metabolismo , Lipase/metabolismo , Estruturas Metalorgânicas/química , Desnaturação Proteica/efeitos dos fármacos , Catálise , Cinética , Estrutura Molecular , Porosidade , Relação Estrutura-Atividade , Propriedades de SuperfícieRESUMO
Over millennia, nature has evolved an ability to selectively recognize and sequester specific metal ions by employing a wide variety of supramolecular chelators. Iron-specific molecular carriers-siderophores-are noteworthy for their structural elegance, while exhibiting some of the strongest and most selective binding towards a specific metal ion. Development of simple uranyl (UO22+) recognition motifs possessing siderophore-like selectivity, however, presents a challenge. Herein we report a comprehensive theoretical, crystallographic and spectroscopic studies on the UO22+ binding with a non-toxic siderophore-inspired chelator, 2,6-bis[hydroxy(methyl)amino]-4-morpholino-1,3,5-triazine (H2BHT). The optimal pKa values and structural preorganization endow H2BHT with one of the highest uranyl binding affinity and selectivity among molecular chelators. The results of small-molecule standards are validated by a proof-of-principle development of the H2BHT-functionalized polymeric adsorbent material that affords high uranium uptake capacity even in the presence of competing vanadium (V) ions in aqueous medium.
RESUMO
Covalent organic frameworks (COFs) are an emerging class of functional nanostructures with intriguing properties, due to their unprecedented combination of high crystallinity, tunable pore size, large surface area, and unique molecular architecture. The range of properties characterized in COFs has rapidly expanded to include those of interest for numerous applications ranging from energy to environment. Here, a background overview is provided, consisting of a brief introduction of porous materials and the design feature of COFs. Then, recent advancements of COFs as a designer platform for a plethora of applications are emphasized together with discussions about the strategies and principles involved. Finally, challenges remaining for this type material for real applications are outlined.
RESUMO
Photomechanical molecular crystals are receiving much attention due to their efficient conversion of light into mechanical work and advantages including faster response time; higher Young's modulus; and ordered structure, as measured by single-crystal X-ray diffraction. Recently, various photomechanical crystals with different motions (contraction, expansion, bending, fragmentation, hopping, curling, and twisting) are appearing at the forefront of smart materials research. The photomechanical motions of these single crystals during irradiation are triggered by solid-state photochemical reactions and accompanied by phase transformation. This Minireview summarizes recent developments in growing research into photoresponsive molecular crystals. The basic mechanisms of different kinds of photomechanical materials are described in detail; recent advances in photomechanical crystals for promising applications as smart materials are also highlighted.
RESUMO
Understanding the effect of gas molecules on the framework structures upon gas sorption in porous materials is highly desirable for the development of gas storage and separation technologies. However, this remains challenging for flexible metal-organic frameworks (MOFs) which feature "gate-opening/gate-closing" or "breathing" sorption behaviors under external stimuli. Herein, we report such a flexible Cd-MOF that exhibits "gating effect" upon CO2 sorption. The ability of the desolvated flexible Cd-MOF to retain crystal singularity under high pressure enables the direct visualization of the reversible closed-/open-pore states before and after the structural transformation as induced by CO2 adsorption/desorption through in situ single-crystal X-ray diffraction experiments. The binding sites of CO2 molecules within the flexible MOF under high pressure and room temperature have also been identified via combined in situ single-crystal X-ray diffraction and powder X-ray diffraction studies, facilitating the elucidation of the states observed during gate-opening/gate-closing behaviors. Our work therefore lays a foundation to understand the high-pressure gas sorption within flexible MOFs at ambient temperature, which will help to improve the design efforts of new flexible MOFs for applications in responsive gas sorption and separation.
RESUMO
The separation of racemic compounds is important in many fields, such as pharmacology and biology. Taking advantage of the intrinsically strong chiral environment and specific interactions featured by biomolecules, here we contribute a general strategy is developed to enrich chirality into covalent organic frameworks (COFs) by covalently immobilizing a series of biomolecules (amino acids, peptides, enzymes) into achiral COFs. Inheriting the strong chirality and specific interactions from the immobilized biomolecules, the afforded biomoleculesâCOFs serve as versatile and highly efficient chiral stationary phases towards various racemates in both normal and reverse phase of high-performance liquid chromatography (HPLC). The different interactions between enzyme secondary structure and racemates were revealed by surface-enhanced Raman scattering studies, accounting for the observed chiral separation capacity of enzymesâCOFs.
Assuntos
Aminoácidos/química , Estruturas Metalorgânicas/isolamento & purificação , Muramidase/química , Peptídeos/química , Cromatografia Líquida de Alta Pressão , Estruturas Metalorgânicas/química , Estruturas Metalorgânicas/metabolismo , Modelos Moleculares , Estrutura Molecular , Muramidase/metabolismo , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Chemical transformations are highly sensitive toward changes in the solvation environment and solvents have long been used to control their outcome. Reactions display unique performance in solvents like ionic liquids or DMSO, however, isolating products from them is cumbersome and energy-consuming. Here, we develop promising alternatives by constructing solvent moieties into porous materials, which in turn serve as platforms for introducing catalytic species. Due to the high density of the solvent moieties, these porous solid solvents (PSSs) retain solvation ability, which greatly influences the performance of incorporated active sites via concerted non-covalent substrate-catalyst interactions. As a proof-of-concept, the -SO3H-incorporated PSSs exhibit high yields of fructose to 5-hydroxymethylfurfural in THF, which exceeds the best results reported using readily separable solvents and even rivals those in ionic liquids or DMSO. Given the wide application, our strategy provides a step forward towards sustainable synthesis by eliminating the concerns with separation unfriendly solvents.
RESUMO
This work describes a facile approach to modify metal-organic frameworks (MOFs) with ionic liquids (ILs), rendering them as useful heterogeneous catalysts for CO2 chemical fixation. An amino-functionalized imidazolium-based ionic liquid is firmly grafted into the porous MOF, MIL-101-SO3H by the acid-base attraction between positively charged ammonium groups on the IL and negatively charged sulfonate groups from the MOF. Analyses by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, 1H NMR, and N2 sorption experiments reveal the MOF-supported ionic liquid (denoted as IL@MOF) material remains intact while functioning as a recyclable heterogeneous catalyst that can efficiently convert CO2 and epichlorohydrin into chloropropene carbonate without the addition of a cocatalyst.