A facile and green synthesis of Mn and P functionalized graphitic carbon nitride nanosheets for spintronics devices and enhanced photocatalytic performance under visible-light.

Manganese and phosphorus co-doped, graphitic carbon nitride (g-C3N4) nanosheet (Mn/P-g-C3N4) is prepared by facile and green calcination process of melamine (C3H6N6), manganese chloride tetrahydrate (MnCl2·4H2O), and ammonium dihydrogen phosphate ((NH4)H2PO4). The Mn/P co-doping significantly enhances magnetic values compared to pristine-g-C3N4, phosphorus-doped g-C3N4 (P-g-C3N4), and manganese-doped g-C3N4 (Mn-g-C3N4). We find that Mn/P-g-C3N4 is a half-metallic ferromagnetic material having a magnetic moment and Curie temperature of 4.51 µB and âˆ¼ 800 K, respectively. The ultraviolet-visible (UV-vis) absorption spectrum of Mn/P-g-C3N4 reveals superior absorption in broader wavelength compared to pristine-g-C3N4, P-g-C3N4, and Mn-g-C3N4. The methyl orange degradation efficiency of Mn/P-g-C3N4 photocatalyst is 94 %, which is three times more than that of pristine-g-C3N4 (29 %) and more significant than the P-g-C3N4 (46 %) and Mn-g-C3N4 (58 %). Furthermore, density functional theory (DFT) calculation explains the origin of high magnetic behavior, the boosted photocatalytic efficiency of Mn/P-g-C3N4, and the essential material properties like structure, bandgap, the density of states (DOS), and atomic level interaction. This work may be helpful for reasonably designing ferromagnetic material for spintronics devices and boosting visible-light (VL) photocatalytic performance for environmental remediation.

The formation mechanism for printed silver-contacts for silicon solar cells.

Screen-printing provides an economically attractive means for making Ag electrical contacts to Si solar cells, but the use of Ag substantiates a significant manufacturing cost, and the glass frit used in the paste to enable contact formation contains Pb. To achieve optimal electrical performance and to develop pastes with alternative, abundant and non-toxic materials, a better understanding the contact formation process during firing is required. Here, we use in situ X-ray diffraction during firing to reveal the reaction sequence. The findings suggest that between 500 and 650 °C PbO in the frit etches the SiNx antireflective-coating on the solar cell, exposing the Si surface. Then, above 650 °C, Ag(+) dissolves into the molten glass frit - key for enabling deposition of metallic Ag on the emitter surface and precipitation of Ag nanocrystals within the glass. Ultimately, this work clarifies contact formation mechanisms and suggests approaches for development of inexpensive, nontoxic solar cell contacting pastes.

Rapid thermal processing chamber for in-situ x-ray diffraction.

Rapid thermal processing (RTP) is widely used for processing a variety of materials, including electronics and photovoltaics. Presently, optimization of RTP is done primarily based on ex-situ studies. As a consequence, the precise reaction pathways and phase progression during the RTP remain unclear. More awareness of the reaction pathways would better enable process optimization and foster increased adoption of RTP, which offers numerous advantages for synthesis of a broad range of materials systems. To achieve this, we have designed and developed a RTP instrument that enables real-time collection of X-ray diffraction data with intervals as short as 100 ms, while heating with ramp rates up to 100 °Cs(-1), and with a maximum operating temperature of 1200 °C. The system is portable and can be installed on a synchrotron beamline. The unique capabilities of this instrument are demonstrated with in-situ characterization of a Bi2O3-SiO2 glass frit obtained during heating with ramp rates 5 °C s(-1) and 100 °C s(-1), revealing numerous phase changes.

Effect of gas flow rates on the anatase-rutile transformation temperature of nanocrystalline TiO2 synthesised by chemical vapour synthesis.

Of the three crystallographic allotropes of nanocrystalline titania (rutile, anatase and brookite), anatase exhibits the greatest potential for a variety of applications, especially in the area of catalysis and sensors. However, with rutile being thermodynamically the most stable phase, anatase tends to transform into rutile on heating to temperatures in the range of 500 degrees C to 700 degrees C. Efforts made to stabilize the anatase phase at higher temperatures by doping with metal oxides suffer from the problems of having a large amorphous content on synthesis as well as the formation of secondary impurity phases on doping. Recent studies have suggested that the as-synthesised phase composition, crystallite size, initial surface area and processing conditions greatly influence the anatase to rutile transformation temperature. In this study nanocrystalline titania was synthesised in the anatase form bya chemical vapour synthesis (CVS) method using titanium tetra iso-propoxide (TTIP) as a precursor under varying flow rates of oxygen and helium. The anatase to rutile transformation was studied using high temperature X-ray diffraction (HTXRD) and simultaneous thermogravimetric analysis (STA), followed by transmission electron microscopy (TEM). It was demonstrated that the anatase-rutile transformation temperatures were dependent on the oxygen to helium flow rate ratio during CVS and the results are presented and discussed.