RESUMO
Clarifying multifactorial musculoskeletal disorder etiologies supports risk analysis and development of targeted prevention and treatment modalities. Deep learning enables comprehensive risk factor identification through systematic analysis of disease datasets but does not provide sufficient context for mechanistic understanding, limiting clinical applicability for etiological investigations. Conversely, multiscale biomechanical modeling can evaluate mechanistic etiology within the relevant biomechanical and physiological context. We propose a hybrid approach combining 3D explainable deep learning and multiscale biomechanical modeling; we applied this approach to investigate temporomandibular joint (TMJ) disorder etiology by systematically identifying risk factors and elucidating mechanistic relationships between risk factors and TMJ biomechanics and mechanobiology. Our 3D convolutional neural network recognized TMJ disorder patients through subject-specific morphological features in condylar, ramus, and chin. Driven by deep learning model outputs, biomechanical modeling revealed that small mandibular size and flat condylar shape were associated with increased TMJ disorder risk through increased joint force, decreased tissue nutrient availability and cell ATP production, and increased TMJ disc strain energy density. Combining explainable deep learning and multiscale biomechanical modeling addresses the "mechanism unknown" limitation undermining translational confidence in clinical applications of deep learning and increases methodological accessibility for smaller clinical datasets by providing the crucial biomechanical context.
RESUMO
In this research, different seeds of Australian-grown date palm (Phoenix dactylifera L.) were studied to evaluate the antioxidant potential and analyze their phenolic constituents. Phenolic compounds were extracted from seeds of various Australian-grown date varieties at different ripening stages. Eight varieties of date seeds (Zahidi, Medjool, Deglet nour, Thoory, Halawi, Barhee, Khadrawy, and Bau Strami) at three ripening stages (Kimri, Khalal, and Tamar) were investigated in this study. Date seeds at Khalal (9.87-16.93 mg GAE/g) and Tamar (9.20-27.87 mg GAE/g) stages showed higher total phenolic content than those at Kimri stage (1.81-5.99 mg GAE/g). For antioxidant assays like DPPH, FRAP, ABTS, RAP, FICA, and TAC, date seeds at Khalal and Tamar stages also showed higher antioxidant potential than Kimri stage. However, date seeds at Kimri stage (55.24-63.26 mg TE/g) expressed higher radical scavenging activity than Khalal (13.58-51.88 mg TE/g) and Tamar (11.06-50.92 mg TE/g) stages. Phenolic compounds were characterized using LC-ESI-QTOF-MS/MS, revealing the presence of 37 different phenolic compounds, including 8 phenolic acids, 18 flavonoids, and 11 other phenolic compounds. Further, phenolic compounds were quantified using LC-DAD, revealing that Zahidi variety of date seeds exhibited the highest content during the Kimri stage. In contrast, during the Khalal and Tamar stages, Deglet nour and Medjool date seeds displayed higher concentrations of phenolic compounds. The results indicated an increase in phenolic content in date seeds after the Kimri stage, with significant variations observed among different date varieties.
Assuntos
Antioxidantes , Phoeniceae , Austrália , Espectrometria de Massas em Tandem , Fenóis , SementesRESUMO
OBJECTIVE: To analyze and compare the effects of a traditional laboratory-fabricated Hyrax expander (T-Hyrax) and two different 3D-printed Hyrax expander models relative to tension points, force distribution, and areas of concentration in the craniofacial complex during maxillary expansion using finite element analysis. MATERIALS AND METHODS: Three maxillary expanders with similar designs, but various alloys were modeled: a T-Hyrax, a fully printed Hyrax (F-Hyrax), and a hybrid printed Hyrax (H-Hyrax). The stress distributions and magnitude of displacements were assessed with a 5 mm expansion in a symmetrical finite element model. The areas of interest included the teeth, alveolar processes, midpalatal suture, nasal complex, circummaxillary sutures (CS), and the expanders themselves. RESULTS: The highest stress value (29.2 MPa) was found at the midpalatal suture of the F-Hyrax, while the lowest stress (0.90 MPa) was found at the temporozygomatic suture in the T-Hyrax. On average, the F-Hyrax increased stress at the CS by 24.76% compared with the T-Hyrax and H-Hyrax. The largest displacements were found at the upper incisor (U1) and anterior nasal spine (ANS). The findings indicated an average increase of 12.80% displacement at the CS using the F-Hyrax compared to the T-Hyrax. CONCLUSION: The F-Hyrax exerts more stress and displacement on the maxilla than both the T-Hyrax and H-Hyrax, where the weak link appears to be the solder joint.
Assuntos
Procaviídeos , Maxila , Humanos , Animais , Análise de Elementos Finitos , Incisivo , Impressão TridimensionalRESUMO
OBJECTIVE: A study was conducted to quantify the performance differences of the nearinfrared spectroscopy (NIRS) calibration models developed with different degrees of hay sample preparations. METHODS: A total of 227 imported alfalfa (Medicago sativa L.) and another 360 imported timothy (Phleum pratense L.) hay samples were used to develop calibration models for nutrient value parameters such as moisture, neutral detergent fiber, acid detergent fiber, crude protein, and in vitro dry matter digestibility. Spectral data of hay samples prepared by milling into 1-mm particle size or unground were separately regressed against the wet chemistry results of the abovementioned parameters. RESULTS: The performance of the developed NIRS calibration models was evaluated based on R2, standard error, and ratio percentage deviation (RPD). The models developed with ground hay were more robust and accurate than those with unground hay based on calibration model performance indexes such as R2 (coefficient of determination), standard error, and RPD. Although the R2 of calibration models was mainly greater than 0.90 across the feed value indexes, the R2 of cross-validations was much lower. The R2 of cross-validation varies depending on feed value indexes, which ranged from 0.61 to 0.81 in alfalfa, and from 0.62 to 0.95 in timothy. Estimation of feed values in imported hay can be achievable by the calibrated NIRS. However, the NIRS calibration models must be improved by including a broader range of imported hay samples in the modeling. CONCLUSION: Although the analysis accuracy of NIRS was substantially higher when calibration models were developed with ground samples, less sample preparation will be more advantageous for achieving rapid delivery of hay sample analysis results. Therefore, further research warrants investigating the level of sample preparations compromising analysis accuracy by NIRS.
RESUMO
This experiment was designed to investigate the effects of feeding diets with different fiber content and forage particle size on the performance, health, nutrient digestion, rumen fermentation, and behavioral and sorting activity of Holstein dairy calves kept under elevated environmental temperature. Sixty weaned Holstein female calves (age = 96.7 ± 7.62 days old; body weight = 82.4 ± 10.4 kg) were randomly assigned to one of 4 treatments arranged in a 2-by-2 factorial design in a 70-day experiment. Dietary forage content (moderate, 22.5%; or high, 40.0% on DM basis) and alfalfa hay particle size (short, 4.39 mm; or long, 7.22 mm as geometric mean) were the experimental factors, resulting in the following combinations: (1) high-fiber (HF) diets with forage-to-concentrate ratio of 40:60 and long particle-sized alfalfa hay (LPS; HF-LPS); (2) HF diets with short particle-sized alfalfa hay (SPS; HF-SPS); (3) moderate-fiber (MF) diets with forage-to-concentrate ratio of 22.5:77.5 with LPS (MF-LPS); and (4) MF diets with SPS (MF-SPS). The temperature-humidity index averaged 73.0 ± 1.86, indicating that weaned calves experienced a moderate extent of heat stress. Fiber level and AH particle size interacted and affected dry matter intake, with the greatest intake (4.83 kg/d) observed in MF-SPS-fed calves. Final body weight was greater in calves receiving MF vs. HF diets (164 vs. 152 kg; p < 0.01). Respiration rate decreased when SPS vs. LPS AH was included in HF but not MF diet. Lower rectal temperature was recorded in calves fed MF vs. HF diet. Digestibility of dry matter and crude protein was greater in calves fed MF than HF diets, resulting in lower ruminal pH (6.12 vs. 6.30; p = 0.03). Fiber digestibility was greater in calves fed SPS compared with those fed LPS alfalfa hay. Feeding HF compared with MF diet increased acetate but lowered propionate molar proportions. The inclusion of SPS vs. LPS alfalfa hay decreased lying time in HF diet (920 vs. 861 min; p < 0.01). Calves fed MF vs. HF diets spent less time eating but more time lying, which is likely indicative of better animal comfort. Dietary fiber level and forage particle size interacted and affected sorting against 19 mm particles, the extent of which was greater in HF-SPS diet. Overall, dietary fiber level had a stronger effect than forage particle size on the performance of weaned calves exposed to a moderate degree of heat stress as feeding MF vs. HF diet resulted in greater feed intake, final body weight, structural growth measures, nutrient digestion, as well as longer lying behavior. The inclusion of SPS alfalfa hay in MF diets increased feed consumption.
RESUMO
This study aimed to establish a comparative database on the chemical composition, in vitro nutritional value, and antioxidant activity of the de-oiled meals produced from walnut, hazelnut, almond, and sesame seeds from the ruminant nutrition perspective. The meals were provided in dried form after their oil harvest using the cold-pressing oil extraction method. Crude protein (CP) constituted the major component of the meals and was the greatest in walnut and almond (average of 45.6% of dry matter (DM)], intermediate in hazelnut meal (41.4%), and least in sesame meal (33.3%)). Potassium was the most abundant mineral in walnut, hazelnut, and almond meals, followed by phosphorus, calcium, and magnesium. The CP fractions determined using the Cornell Net Carbohydrate and Protein System were largely different across the meals, with fraction A being the greatest in hazelnut (40.9% of CP) and intermediate in almond, sesame, and walnut meals (11.4% of CP). The unavailable CP fraction (fraction C) was the least abundant fraction in all meals, ranging from 0.13% of CP in walnut to 3.30% of CP in hazelnut meal. Oleic and linoleic acids were the predominant unsaturated fatty acids, and palmitic acid was the principal fatty acid in all meals analyzed. The fractional degradation rate (h-1) ranged from 0.043 in almond meal to 0.017 in walnut meal. In vitro intestinal CP digestibility (% of rumen-undegraded protein) ranged from 91.6 in hazelnut meal to 97.2 in almond meal. Total phenolics expressed as milligram tannic acid equivalent/gram DM was greatest in walnut meal (11.9), resulting in the greatest antioxidant activity recorded for walnut meal (83.2%). This study provided a database on the nutrient composition, in vitro nutritional value, and antioxidant capacity of the selected de-oiled meals. Additional investigation is needed to identify the in vivo response of their inclusion in the diet of ruminants.
RESUMO
Rye (Secale cereale L.) is a valuable annual forage crop in Korea but there is limited information about the impact of chemical and biological additives on fermentation characteristics of the crop. This experiment was conducted to investigate fermentation dynamics of wilted forage rye treated with the following six additives; control (no additive), sodium diacetate applied at 3 g/kg wilted forage weight (SDA3), 6 g/kg wilted forage weight (SDA6), inoculations (106 CFU/g wilted forage) of Lactobacillus plantarum (LP), L. buchneri (LB), or LP+LB. The ensiled rye sampled at 1, 2, 3, 5, 10, 20, 30, and 45 days indicated that the acidification occurred fast within five days of storage than the rest of the storage period. The microbial inoculants decline the pH of ensiled forage, more rapidly than the control or SDA treated, which accompanied by the decrease of water-soluble carbohydrates and increase of lactic acid. Compared with the control silage, all treatments suppressed ammonia-nitrogen formation below to 35 g/kg DM throughout the sampling period. Suppression of total microbial counting occurred in SDA6, LP, and LP + LB. The lactic acid production rates were generally higher in microbial inoculation treatments. Acetic acid concentration was lowest in the LP-treated silage and highest in the SDA- and LB-treated silages. The in vitro dry matter (DM) digestibility and total digestible nutrients were the highest in the silage treated with SDA (6 g/kg) at day 45 of ensiling. Based on lower ammonia-nitrogen concentrations and higher feed value, ensiling forage rye treated with SDA at 6 g/kg is promising through enhanced silage quality.
RESUMO
This study reports the synthesis of a nanocomposite consisting of spongin and its applicability in the development of an aptasensing platform with high performance. The spongin was carefully extracted from a marine sponge and decorated with copper tungsten oxide hydroxide. The resulting spongin-copper tungsten oxide hydroxide was functionalized by silver nanoparticles and utilized in electrochemical aptasensor fabrication. The nanocomposite covered on a glassy carbon electrode surface amplified the electron transfer and increased active electrochemical sites. The aptasensor was fabricated by loading of thiolated aptamer on the embedded surface via thiol-AgNPs linkage. The applicability of the aptasensor was tested in detecting the Staphylococcus aureus bacterium as one of the five most common causes of nosocomial infectious diseases. The aptasensor measured S. aureus under a linear concentration range of 10-108 colony-forming units per milliliter and a limit of quantification and detection of 12 and 1 colony-forming unit per milliliter, respectively. The highly selective diagnosis of S. aureus in the presence of some common bacterial strains was satisfactorily evaluated. The acceptable results of the human serum analysis as the real sample may be promising in the bacteria tracking in clinical samples underlying the green chemistry principle.
Assuntos
Aptâmeros de Nucleotídeos , Técnicas Biossensoriais , Nanopartículas Metálicas , Nanocompostos , Humanos , Staphylococcus aureus , Cobre , Prata , Técnicas Eletroquímicas/métodos , Técnicas Biossensoriais/métodos , Limite de DetecçãoRESUMO
Metal-fluoroquinolones have more antibacterial and cytotoxic effects compared to free fluoroquinolones. In this work, a bidentated Mn (II) complex with ofloxacin (MOC) was synthesized and its cytotoxicity activity, oxidative stress and DNA binding were studied. Anti- proliferative and cytotoxic tests revealed that MOC exhibits better anti proliferative and cytotoxic activities compared to OFL which was attributed to the more interaction of MOC with DNA. Therefore, the interaction of MOC with DNA was investigated by using voltammetry, UV-Vis, fluorescence, and in silico methods. The results revealed that MOC interacts with DNA via electrostatic and outside hydrogen binding via minor groove. The proposed DNA binding modes may support the greater in-vitro cytotoxicity of MOC compared to OFL alone.
Assuntos
Antibacterianos , Ofloxacino , Ofloxacino/farmacologia , Antibacterianos/farmacologia , Metais , DNA/metabolismoRESUMO
Preparing samples for analyses is perhaps the most important part to analyses. The varied functional groups present on the surface of biopolymers bestow them appropriate adsorption properties. Properties like biocompatibility, biodegradability, presence of different surface functional group, high porosity, considerable absorption capacity for water, the potential for modification, etc. turn biopolymers to promising candidates for varied applications. In addition, one of the most important parts of determination of an analyte in a matrix is sample preparation step and the efficiency of this step in solid phase extraction methods is largely dependent on the type of adsorbent used. Due to the unique properties of biopolymers they are considered an appropriate choice for using as sorbent in sample preparation methods that use from a solid adsorbent. Many review articles have been published on the application of diverse adsorbents in sample preparation methods, however despite the numerous advantages of biopolymers mentioned; review articles in this field are very few. Thus, in this paper we review the reports in different areas of sample preparation that use polysaccharides-based biopolymers as sorbents for extraction and determination of diverse organic and inorganic analytes.
Assuntos
Polissacarídeos , Extração em Fase Sólida , Biopolímeros , Extração em Fase Sólida/métodos , Adsorção , ÁguaRESUMO
This experiment investigated the effects of replacing alfalfa hay (AH) and corn silage (CS) with wheat straw (WS) and beet pulp (BP) in diets with similar forage 30-h undigested neutral detergent fiber (uNDF30) on chewing behavior and ruminal fermentation of lactating cows. Twelve multiparous Holstein cows (51 ± 3 kg/d of milk; days in milk = 97 ± 13; mean ± standard error) were housed in individual stalls and used in a replicated 3 × 3 Latin square design with 28-d periods. Experimental diets were (1) 0% forage uNDF30 from WS (WS0, contained 2% BP); (2) 50% forage uNDF30 from WS (WS50, contained 7.6% BP); and (3) 100% forage uNDF30 from WS (WS100, contained 12.4% BP). From 0 to 2 h after the morning feeding, there was a tendency observed for a quadratic effect on dry matter intake (DMI), with cows fed WS50 consuming the greatest amount of DM (9.19 kg). Later DMI (4 to 6 h and 6 to 24 h postfeeding) decreased as dietary proportion of WS and BP increased. Increasing WS and BP decreased eating behavior, but had no detected effect on rumination time (455 min/d), which resulted in a linear reduction in chewing time (the sum of eating and rumination activities). As WS and BP inclusion increased, the number of meals decreased linearly, whereas time between meals, eating rate, and meal size per kilogram of DM increased linearly. Increased dietary inclusion of WS and BP tended to decrease total ruminal VFA and resulted in a linear decrease in propionate but an increase in acetate proportion and ammonia-N concentration in the rumen. Overall, the substitution had no effect on rumination activity, possibly suggesting that a combination of WS and BP could be used in dairy cow rations as substitutes for high-quality forages when WS was added to maintain the uNDF30 level.
RESUMO
Epirubicin is prescribed as an essential drug for treating breast, prostate, uterine, and gastrointestinal cancers. It has many side effects, such as heart failure, mouth inflammation, abdominal pain, fever, and shortness of breath. Its measurement is necessary by straightforward and cheap methods. The application of aptamer-based electrochemical sensors is accounted as a selective option for measuring different compounds. In this work, a thiol-modified aptamer was self-assembled on the surface of the gold electrode (AuE) boosted with carbon nano-onions (CNOs), and coupled with methylene blue (MB) as an electroactive tracker to achieve a sensitive and selective aptasensor. In the absence of the epirubicin, CNOs binds to the aptamer through a π-π interaction enhancing the MB electrochemical signal. When epirubicin binds to the aptamer, the adsorption of CNOs and MB to the aptamer is not well established, so the electrochemical signal is reduced, consequently, the epirubicin value can be measured. The prepared aptasensor demonstrated an excellent sensitivity with a curve slope of 0.36 µI/nM, and 3 nM limit of detection in the linear concentration range of 1-75 nM. The prepared aptasensor was accurately capable of measuring epirubicin in blood serum samples.
Assuntos
Aptâmeros de Nucleotídeos , Técnicas Biossensoriais , Nanopartículas Metálicas , Masculino , Humanos , Carbono/química , Epirubicina , Azul de Metileno/química , Ouro/química , Aptâmeros de Nucleotídeos/química , Técnicas Eletroquímicas/métodos , Técnicas Biossensoriais/métodos , Eletrodos , Limite de Detecção , Nanopartículas Metálicas/químicaRESUMO
Turmeric (Curcuma longa L.) rhizome is one of the most famous plants that has been widely used in food, medicine, and industry. Its quality deeply depends on the presence of curcuminoids and their ratios. As their structures are very similar to each other, this work reported simple, accurate, fast, and sensitive method based on developed ternary H-point standard for differential pulse voltammetry (t-HPSAM-DPV). For electrochemical determination of three analytes in the sample, three standards were added simultaneously. This method was developed for detection of three curcuminoids including curcumin (CU), desmethoxycurcumin (DMC), and bisdemethoxycurcumin (BDMC) in real samples. The precision of method has RSD% < 5.5 % and the accuracy of proposed method has relative error lower than 7.0 %. Also, intra and inter-day precisions have provided the mean RSD% < 4.50. The LOD values were obtained for CU, DMC and BDMC are 0.6 × 10-6, 0.57 × 10-6 and 0.42 × 10-6, respectively. Compared with other reported HPLC methods, the results revealed a reasonable accurate precision for proposed method. Under optimized experimental conditions, t-HPSMA significantly resolved overlapping of DPV peaks of CU, DMC, and BDMC. This method can be successfully used for ternary analysis of analytes using one standard addition to the real samples.
Assuntos
Curcumina , Cromatografia Líquida de Alta Pressão/métodos , Curcumina/química , Diarileptanoides , RizomaRESUMO
OBJECTIVE: The primary goal was to identify the effectiveness of chemical or biological additives in delaying the deterioration of early-harvested wilted rye silage after exposure to air. METHODS: Rye harvested as a whole plant at the early heading stage was wilted for 24 h. The wilted forage was divided into treatments including sodium diacetate (SDA) at 3 (SDA3) and 6 g/kg (SDA6), Lactobacillus plantarum (LP), L. buchneri (LB), or their equal mixture (LP+LB) at 1×106 colony-forming unit/g fresh matter. RESULTS: After 60 d of conservation in 20-L silos, lactic acid was greater in LP and LP+LB silages than other treatments (102 vs 90.2 g/kg dry matter [DM]). Acetic acid was greatest in SDA6 (32.0 g/kg DM) followed by LB (26.1 g/kg DM) and was lowest in LP treatment (4.73 g/kg DM). Silage pH was lower with microbial inoculation and the lowest and highest values were observed in LP and untreated silages, respectively. After 60 d, neutral detergent fiber concentration was lowest in SDA6 silages, resulting in the greatest in vitro DM digestibility (846 g/kg DM). Aerobic stability was longest in SDA6 (176 h) followed by LB treatment (134 h). Instability after aerobiosis was greatest in LP silages (68 h), about 8 h less than untreated silages. After aerobic exposure, yeast and mold numbers were lowest in SDA6 silages, resulting in DM loss minimization. Exhaustion of acetic acid and lactic acid after aerobic exposure was lowest with SDA6 but greatest with untreated and LP silages. CONCLUSION: Treatment of early-cut wilted rye forage with SDA at 6 g/kg resulted in silages with higher feeding value and fermentation quality, and substantially delayed deterioration after aerobic exposure, potentially qualifying SDA at this load for promotion of silage quality and delaying aerobic spoilage of early-harvested (low DM) rye forage.
RESUMO
The present technical note describes design, development and validation of an automated equipment for measurement of kinetics of gas production during fermentation in glass bottles. The overall repeatability and precision of the developed system was evaluated and compared with the manual gas measurement technique in respect to characterization of the fermentation kinetics of ruminant livestock feeds. Two incubations were carried out, during which the GP of six different feeds was measured with the automated system or manual technique. During a 48-hour incubation period, pressure data were collected at 15-minute intervals using automated equipment, yielding 192 head-space pressure measurements for each bottle. In manual measurement, incubations were performed with the nominal 60-mL serum bottle, and headspace pressure was read using a digital pressure gauge and then released at 2, 4, 6, 8, 12, 16, 24, 36, and 48 hours of incubation. The automated equipment recorded greater GP (+11.5%, over the 48-h incubation) than the manual measurement, and the repeatability and coefficient of repeatability values indicated that the GP data obtained with manual equipment were less repeatable. The automated equipment measures the fermentative GP kinetics with greater precision and repeatability than manual technique.â¢An automated batch GP equipment was designed, developed and validated, and a comparison was made with GP data obtained manually using a digital pressure gauge.â¢The automated equipment provided more reliable and repeatable data compared with manual measurement.â¢The automated equipment is available with lower cost and more functionality.
RESUMO
Whole-plant corn (Zea may L.) and sorghum-sudangrass hybrid [Sorghum bicolor (L.) Moench] are major summer crops that can be fed as direct-cut or silage. Proso millet is a short-season growing crop with distinct agronomic characteristics that can be productive in marginal lands. However, information is limited about the potential production, feed value, and ensilability of proso millet forage. We evaluated proso millet as a silage crop in comparison with conventional silage crops. Proso millet was sown on June 8 and harvested on September 5 at soft-dough stage. Corn and sorghum-sudangrass hybrid were planted on May 10 and harvested on September 10 at the half milk-line and soft-dough stages, respectively. The fermentation was evaluated at 1, 2, 3, 5, 10, 15, 20, 30, and 45 days after ensiling. Although forage yield of proso millet was lower than corn and sorghum-sudangrass hybrid, its relative feed value was greater than sorghum-sudangrass hybrid. Concentrations of dry matter (DM), crude protein, and water-soluble carbohydrate decreased commonly in the ensiling forage crops. The DM loss was greater in proso millet than those in corn and sorghum-sudangrass hybrid. The in vitro dry matter digestibility declined in the forage crops as fermentation progressed. In the early stages of fermentation, pH dropped rapidly, which was stabilized in the later stages. Compared to corn and sorghum-sudangrass hybrid, the concentration of ammonia-nitrogen was greater in proso millet. The count of lactic acid bacteria reached the maximum level on day 10, with the values of 6.96, 7.77, and 6.95 Log10 CFU/g fresh weight for proso millet, corn, and sorghum-sudangrass hybrid, respectively. As ensiling progressed, the concentrations of lactic acid and acetic acid of the three crops increased and lactic acid proportion became higher in the order of sorghum-sudangrass hybrid, corn, and proso millet. Overall, the shorter, fast-growing proso millet comparing with corn and sorghum-sudangrass hybrid makes this forage crop an alternative option, particularly in areas where agricultural inputs are limited. However, additional research is needed to evaluate the efficacy of viable strategies such as chemical additives or microbial inoculants to minimize ammonia-nitrogen formation and DM loss during ensiling.
RESUMO
OBJECTIVE: Two series of experiments were conducted to determine how the incremental levels of sodium metabisulfite (SMB)-treated fruit and vegetable discards (FVD) in diet of Hanwoo heifers and cows affect their performance and health. METHODS: In Exp. 1, 36 Hanwoo heifers were stratified by age (13.3±0.83 mo) and initial body weight (305±19.7 kg), and divided randomly to one of three diets containing 0%, 10%, or 20% SMB-treated FVD (as-fed basis). The experiment lasted 110 d, including 20 d of adaptation. In Exp. 2, 24 multiparous Hanwoo cows were divided into three groups based on age (48.2±2.81 mo) and initial body condition score (2.64±0.33). Cows in each block were assigned randomly to one of three diets containing 0%, 11%, or 22% SMB-treated FVD (as-fed basis). The experiment lasted 80 d, including a 20-d adaptation period. In both experiments, SMB-treated FVD was used as a replacement for wet brewers grain in total mixed ration (TMR). RESULTS: Growing heifers exhibited no differences in their daily feed intake (6.58±0.61 kg/d dry matter [DM]), average daily gain (0.60±0.07 kg/d), and body condition score when they consumed the incremental levels of SMB-treated FVD. Although most blood metabolites were unaffected by treatments, blood urea-N and ß-hydroxybutyrate levels decreased linearly as the SMB-treated FVD level increased in TMR. Similar to Exp. 1, minor differences were found in daily feed intake (8.27±0.72 kg DM/d) and body condition score of Hanwoo cows. Most blood metabolites remained unaffected by treatments, but blood urea-N decreased as the SMB-treated FVD level in TMR increased. CONCLUSION: Our findings suggest that SMB-treated FVD could be safely incorporated into the diet of Hanwoo heifers and cows, potentially improving N-use efficiency in the body while not impairing performance or health.
RESUMO
Supplying a sufficient amount of high-quality colostrum is a prevailing challenge in Hanwoo calf production systems. This study aimed to describe the efficiency of a lacteal-derived colostrum replacer versus natural bovine colostrum (from Holstein) fed to Hanwoo calves. Forty newborn Hanwoo calves (25 males and 15 females; 30.7 ± 3.15 kg body weight [mean ± standard deviation]) were blocked by sex and birth weight and fed either natural colostrum or a commercial colostrum replacer. Calves displayed a narrow difference in the evolution of body weight and structural body dimensions when they received a commercial versus natural colostrum. Minor differences existed in the starter and total dry matter consumption between calves fed natural or commercial colostrum. Although the colostrum source had no significant effects on days to first diarrhea (average of 7.6 days; p = 0.17), the duration of diarrhea was longer in natural colostrum-fed calves (3.2 vs. 4.5 days; p = 0.04). Consumption of natural colostrum resulted in greater mean serum immunoglobulin G (IgG) on day 2 (14.7 vs. 10.8 ± 0.92 mg/mL) and day 7 (8.21 vs. 5.12 ± 0.82 mg/mL) of calf life, resulting in a greater proportion of commercial colostrum-fed calves (50% vs. 15%; day 2) to experience failure of passive transfer of immunity (serum IgG < cutoff point of 10 mg/mL). Overall, growth rate, body frame development, and incidence of diarrheal disease were not different in both groups. These results suggested that the colostrum replacer product tested in this study could be an alternative to natural colostrum derived from Holstein cow in securing calf growth and health in Hanwoo calf-rearing operations.
RESUMO
OBJECTIVE: Our recent findings confirmed the effectiveness of sodium metabisulfite (SMB) in controlling the growth of undesirable microorganisms in fruit and vegetable discards (FVD); however, lactic acid bacteria (LAB) are susceptible to its antibacterial effects. Two series of experiments were conducted to enable the survivability of LAB during silage fermentation of a total mixed ration (TMR) containing SMB-treated FVD. METHODS: In Exp. 1, the objective was to isolate a strain of LAB tolerable to the toxic effect of SMB. In Exp. 2, the SMB load was minimized through its partial replacement with a chemical mixture (CM) based on sodium benzoate (57%), potassium sorbate (29%), and sodium nitrite (14%). FVD was treated with SMB + CM (2 g each/kg biomass) and added to the TMR at varying levels (0%, 10%, or 20%), with or without KU18 inoculation. RESULTS: The KU18 was screened as a presumptive LAB strain showing superior tolerance to SMB in broth medium, and was identified at the molecular level using 16S rRNA gene sequence analysis as Lactobacillus plantarum. Inoculation of KU18 in TMR containing SMB was not successful for the LAB development, biomass acidification, and organoleptic properties of the resultant silage. In Exp. 2, based on the effectiveness and economic considerations, an equal proportion of SMB and CM (2 g each/kg FVD) was selected as the optimal loads for the subsequent silage fermentation experiment. Slight differences were determined in LAB development, biomass acidification, and sensorial characteristics among the experimental silages, suggesting the low toxicity of the preservatives on LAB growth. CONCLUSION: Although KU18 strain was not able to efficiently develop in silage mass containing SMB-treated FVD, the partial substitution of SMB load with the CM effectively alleviated the toxic effect of SMB and allowed LAB development during the fermentation of SMB + CM-treated FVD in TMR.
RESUMO
Due to high affinity and specificity of aptamers, they are widely considered for construction of aptasensor to specific recognizing of analytes in biological complex matrix. So, in this work we design a high selective and sensitive aptasensor for leukemia cancer cells (CCRF-CEM) via superior catalytic effect of copper sulfide-graphene (CuS-GR) nanocomposite as label and Au-GR nanocomposite as sensing platform. The CuS-GR nano-composite (label component) is CuS nanoparticles that wrapping on graphene sheets. Its catalytic activity (CuS-GR) increases the current of sensor in parallel with adding of CCRF-CEM and provide sensitive detection of analytes. The detailed of signal amplification and effect on the aptasensor performance completely discussed. This sensor has a linear range of 50-1 × 106 cell mL-1, with a limit of detection of 18 cell mL-1. Also, the developed aptasensor has a significance specificity, high sensitivity and accuracy. It was used for the identification of CCRF-CEM cells in blood samples.