RESUMO
Hydrogels are hydrophilic, insoluble, and highly porous 3D networks capable of absorbing large amounts of water. This study aimed to develop a carboxymethyl cellulose/graphene oxide (CMC/GO) hydrogel, cross-linked with citric acid and modified with zinc oxide (ZnO) nanoparticles (CMC/GO/ZnO), synthesized via the sol-gel method. The formulated composite hydrogel samples were characterized by Fourier transmittance infrared spectroscopy (FTIR), scanning electron microscopy (SEM) analysis, X-ray diffraction (XRD), transmission electron microscopy (TEM), and thermo-gravimetric analysis (TGA). The hydrogels were tested for the adsorption of basic fuchsin (BF) dye from the aqueous medium under various conditions, such as adsorbent dosage, contact time, pH, and temperature, using batch adsorption. The adsorption data best fit the Langmuir and Temkin models, with maximum adsorption capacity (qmax) of 172.41 mg/g for CMC/GO and 303.03 mg/g for CMC/GO/ZnO. Optimal adsorption occurred at pH = 6 and within 30 min. The process followed a pseudo-second-order kinetic model, and thermodynamic results indicated that the adsorption process is physical, endothermic and spontaneous. The COOH groups in the hydrogels enhanced affinity for cationic dyes through hydrogen bonding and electrostatic interactions. Thus, CMC/GO and CMC/GO/ZnO hydrogels are efficient and promising adsorbents for environmental remediation.
Assuntos
Carboximetilcelulose Sódica , Grafite , Hidrogéis , Poluentes Químicos da Água , Óxido de Zinco , Grafite/química , Óxido de Zinco/química , Hidrogéis/química , Carboximetilcelulose Sódica/química , Adsorção , Poluentes Químicos da Água/química , Poluentes Químicos da Água/isolamento & purificação , Concentração de Íons de Hidrogênio , Purificação da Água/métodos , Cinética , Corantes/química , Corantes/isolamento & purificação , Temperatura , Água/química , Termodinâmica , Nanocompostos/química , Difração de Raios XRESUMO
BACKGROUND: The use of protein supplements by athletes has risen due to their effectiveness in meeting dietary needs. However, there is a growing concern about the presence of potentially toxic metals (PTMs. Al, Cr, Mn, Ni, Cu, Zn, Cd, and Pb) in these supplements. Consequently, it is crucial to evaluate the levels of these PTMs to ensure the safety of the supplements. METHODS: The objective of the current study was to assess the PTMs concentrations in protein supplements and examine any possible health hazards. Twenty-five samples of protein supplements were purchased from different pharmacies to screen them for metals. Inductively coupled plasma-optical emission spectrometry (ICP-OES) was utilized to analyze metal content. Additionally, chemometric methods such as Pearson's correlation coefficient (PCC), principal component analysis (PCA), and hierarchical cluster analysis (HCA) were employed to identify possible sources of PTMs contamination in protein supplements. RESULTS: Concentration ranges for PTMs were found as, Al (0.03-3.05â¯mg/kg), Cr (0.11-0.89â¯mg/kg), Mn (1.13-8.40â¯mg/kg), Ni (0.06-0.71â¯mg/kg), Cu (1.05-5.51â¯mg/kg), Zn (2.14-27.10â¯mg/kg), Cd (0.01-0.78â¯mg/kg), and Pb (0.06-0.57â¯mg/kg). The weekly intake of Cd exceeded the level of tolerable weekly intake (TWI) set by the European Food Safety Authority (EFSA). CONCLUSION: Athletes, bodybuilders, fitness enthusiasts, dieters, young adults and adolescents, and health-conscious individuals should be conscious of Cd concentration as it does not compliance the TWI set by EFSA. Target hazard quotient (THQ < 1), hazard index (HI < 1), margin of exposure (MOE ≥ 1), percentile permitted daily exposure (% PDE < 100), and cumulative cancer risk (CCR < 1 × 10-3) analyses revealed that there are no appreciable non-carcinogenic and carcinogenic health risks associated with the use of these products.
Assuntos
Suplementos Nutricionais , Humanos , Suplementos Nutricionais/análise , Análise de Componente Principal , Metais/análise , Análise por ConglomeradosRESUMO
Across the world, nutraceuticals/dietary supplements are commonly consumed without medical supervision, and believing these products are harmless to health. However, these products may contain trace (TMs) and non-essential/heavy metals (nHMs) as contaminants at levels higher than the recommended daily allowance (RDA), which can be hazardous to human health. Consequently, it is crucial to assess the levels of these metals to ensure the safety of these products. This study aimed to analyze the concentration of TMs (Mn, Cu and Zn) and nHMs (Al, Cr, Ni, Cd and Pb) in nutraceuticals/dietary supplements. Metal analysis was conducted using inductively coupled plasma-optical emission spectrometry (ICP-OES). Multivariate and bivariate analysis including principle component analysis (PCA), hierarchical cluster analysis (HCA) and Pearson correlation coefficient (PCC) were applied to understand inter-metal association and sources of these metals. Concentration ranges for TMs were found as, Mn (0.2-4.3 mg/kg), Cu (0.11-2.54 mg/kg), and Zn (0.1-22.66 mg/kg) while the nHMs concentration ranges were: Al (0.046-3.336 mg/kg), Cr (0.11-1.63 mg/kg), Ni (0.18-0.72 mg/kg), Cd (0.04-0.92 mg/kg), and Pb (0.18-1.08 mg/kg). The levels of tolerable dietary intake (TDI) for Cr and Ni, and the provisional tolerable monthly intake (PTMI) limit for Cd, exceeded the values set by the World Health Organization (WHO) and the European Food Safety Authority (EFSA). The estimation of the target hazard quotient (THQ <1), hazard index (HI < 1) and cumulative cancer risk (CCR <1 â 10-3) indicated no significant non-carcinogenic and carcinogenic health risks associated with consuming these products. Therefore, the primary recommendation from this study is to use the nutraceuticals/dietary supplements should be under the supervision of dietitian.
Assuntos
Exposição Dietética , Suplementos Nutricionais , Contaminação de Alimentos , Metais Pesados , Suplementos Nutricionais/análise , Humanos , Metais Pesados/análise , Contaminação de Alimentos/análise , Medição de Risco , Análise de Componente Principal , Quimiometria/métodos , Oligoelementos/análise , Análise por ConglomeradosRESUMO
A significant amount of plastic trash has been dumped into the environment across the world, contributing to the present white pollution crisis. Therefore, plastic manufacturing and disposal must be examined. Biodegradable plastics (BPs) have recently become the subject of study due to their beneficial biodegradability and harmlessness, and they have been the most efficient method for addressing the issue of plastic pollution. This study aims to enhance the synthesis of biodegradable polymers from sodium alginate (Na-Alg) with the addition of guar gum, corn starch, and gelatin using the solution-casting method, followed by mixing in suitable proportions and drying at a certain temperature, resulting in thin film formation. To enhance qualities of the already produced polymer, additional substances such as glycerol, PVA, and latex were added as plasticizers. Characterization techniques such as scanning electron microscopy (SEM), tensile strength, thermogravimetric analysis (TGA), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), differential scanning calorimetry (DSC), UV-vis spectroscopy, and Fourier transform infrared (FTIR) spectroscopy were used to study structural characteristics, surface morphology, polymeric linkages, water absorption capabilities, chemical conductivity, and light transmittance of the newly formed films. These characterization results depict a remarkable achievement in the sense of the high degradability and impressive tensile strength of the newly formed films. In addition, SEM images indicated a porous structure with interconnected pores. FT-IR confirms the occurrence of molecular interactions between separate components. Consequently, different films showed different behavior of degradability, and it is suggested from interpreting the results that the polymeric films may be a viable biodegradable option.
RESUMO
OBJECTIVE AND SIGNIFICANCE: Reducing the dimensions, when other additives are present, shows potential as a method to improve the dissolution and solubility of biopharmaceutical classification system class II drugs that have poor solubility. In this investigation, the process involved grinding naproxen with nicotinamide with the aim of improving solubility and the rate of dissolution. METHODS: Naproxen was subjected to co-milling with urea, dimethylurea, and nicotinamide using a planetary ball mill for a duration of 90 min, maintaining a 1:1 molar ratio for the excipients (screening studies). The co-milled combinations, naproxen in its pure milled form, and a physical mixture were subjected to analysis using X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), and solubility assessment. The mixture displaying the highest solubility (naproxen-nicotinamide) was chosen for further investigation, involving testing for intrinsic dissolution rate (IDR) and Fourier-transform infrared spectroscopy (FTIR) after co-milling for both 90 and 480 min. RESULTS AND CONCLUSION: The co-milled combination, denoted as S-3b and consisting of the most substantial ratio of nicotinamide to naproxen at 1:3, subjected to 480 min of milling, exhibited a remarkable 45-fold increase in solubility and a 9-fold increase in IDR. XRPD analysis of the co-milled samples demonstrated no amorphization, while SEM images portrayed the aggregates of naproxen with nicotinamide. FTIR outcomes negate the presence of any chemical interactions between the components. The co-milled sample exhibiting the highest solubility and IDR was used to create a tablet, which was then subjected to comprehensive evaluation for standard attributes. The results revealed improved compressibility and dissolution properties.
Assuntos
Naproxeno , Niacinamida , Solubilidade , Comprimidos , Difração de Raios X , Naproxeno/química , Niacinamida/química , Difração de Raios X/métodos , Excipientes/química , Química Farmacêutica/métodos , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Composição de Medicamentos/métodos , Microscopia Eletrônica de Varredura/métodosRESUMO
Elevated levels of trace metals (TMs) and heavy/non-essential metals (HnMs) in commonly consumed beverages concern the public and regulatory agencies. Thus, frequent monitoring of these metals is critically important. The present study intended to assess TMs and HnMs concentrations and associated health risks in beverages. Ten metals, such as Mn, Co, Cr, Cu, and Zn (TMs) and Ni, Cd, Pb, Al, and As (HnMs), were quantified in different beverage brands categorized into two groups such as non-carbonated and carbonated beverages. Chemometric analysis such as hierarchical cluster analysis (HCA), Pearson's correlation coefficient (PCC), and principal component analysis (PCA) were also performed to demonstrate the possible natural and anthropogenic sources of metal contamination. Among the TMs, the mean concentration of Zn (233.3 ± 3.3-291.7 ± 3.2 µg/L) followed by Mn (119.0 ± 2.3-146.4 ± 2.2 µg/L) was found highest in both carbonated and non-carbonated beverage samples. In the case of HnMs, the lowest mean concentration of Cd (7.4 ± 0.9-18.6 ± 1.2 µg/L) followed by Pb (4.1 ± 0.4-4.5 ± 0.4 µg/L) was observed in both types of beverage samples. The tolerable dietary intake (TDI) value for Ni and provisional tolerable monthly intake (PTMI) value for Cd were higher than the value established by the WHO and EFSA. The computed values of the hazard index (HI < 1) and the cumulative cancer risk (CCR) indicated a low risk of exposure.
RESUMO
BACKGROUND: The perennial evergreen tea (Camellia sinensis) plant is one of the most popular nonalcoholic drinks in the world. Fertilizers and industrial, agricultural, and municipal activities are the usual drivers of soil contamination, contaminating tea plants with potentially toxic elements (PTEs). These elements might potentially accumulate to larger amounts in the leaves of plants after being taken up from the soil. Thus, frequent monitoring of these elements is critically important. METHODS: The present study intended to determine PTEs (Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd, and Pb) in both tea leaves and infusions using ICP-OES. Various multivariate data analysis methods such as principal component analysis (PCA) and hierarchical cluster analysis (HCA) were employed to elucidate the potential sources of PTEs contamination, whether from anthropogenic activities or natural origins. Additionally, Pearson's correlation coefficient (PCC) was calculated to assess the relationships between the variables under study. RESULTS: The mean contents (mg/L) of all studied elements in tea infusions decreased in order Mn (150.59⯱â¯1.66)â¯>â¯Fe (11.39⯱â¯0.99)â¯>â¯Zn (6.62⯱â¯0.89)â¯>â¯Cu (5.86⯱â¯0.62)â¯>â¯Co (3.25⯱â¯0.64)â¯>â¯Ni (1.69⯱â¯0.23)â¯>â¯Pb (1.08⯱â¯0.16)â¯>â¯Cr (0.57⯱â¯0.09)â¯>â¯Cd (0.46⯱â¯0.09)â¯>â¯Al (0.05⯱â¯0.008), indicating that Mn exhibits the highest abundance. The mean concentration trend in tea leaf samples mirrored that of infusions, albeit with higher concentrations of PTEs in the former. The tolerable dietary intake (TDI) value for Ni and provisional tolerable monthly intake (PTMI) value for Cd surpassed the standards set by the WHO and EFSA. Calculated hazard index (HIâ¯<â¯1) and cumulative cancer risk (CCR) values suggest negligible exposure risk. CONCLUSION: Elevated levels of PTEs in commonly consumed tea products concern the public and regulatory agencies.
Assuntos
Chá , Chá/química , Análise Multivariada , Análise de Componente Principal , Carcinógenos/análise , Oligoelementos/análise , Humanos , Folhas de Planta/química , Camellia sinensis/químicaRESUMO
Cotton bollworm (Helicoverpa armigera) is a highly polyphagous, widely prevalent, and persistent Old World insect pest that affects numerous important crops that are directly consumed by people, including tomato, cotton, pigeon pea, chickpea, rice, sorghum, and cowpea. Insects do not synthesize steroids but obtain them from their diet. Inhibition of dietary uptake of steroids by insects is a potentially effective insecticidal mechanism that should not be toxic to humans and other mammals, who synthesize their steroids. Ten curcumin derivatives were tested against H. armigera sterol carrier protein-2 (HaSCP-2) for their potential as insecticidal agents. Curcumin derivatives were initially docked at the binding site of HaSCP-2 to determine their binding affinities and plausible binding modes. The binding modes predominantly show hydrophobic interactions of derivatives with Phe53, Phe110, and Phe89 as core interacting residues in the active site. Validation of in silico results was carried out by performing a fluorescence binding and displacement assay to determine the binding affinities of curcumin derivatives. Among a collection of curcumin derivatives tested, Cur10 showed the lowest IC50 value of 9.64 µM, while Cur07 was 19.86 µM, and Cur06 was 20.79 µM. There was a significant negative correlation between the ability of the curcumin derivatives tested to displace the fluorescent probe from the sterol binding site of HaSCP-2 and to inhibit Sf9 insect cell growth in culture, which is consistent with the curcumin derivatives acting by the novel mechanism of blocking sterol uptake. Then molecular dynamics simulation studies validated the predicted binding modes and the interactions of curcumin derivatives with HaSCP-2 protein. In conclusion, these studies support the potential use of curcumin derivatives as insecticidal agents.
RESUMO
Hydrogels are 3-dimensional polymer networks capable of absorbing a large amount of water. Natural polymeric hydrogels are biodegradable, non-toxic and biocompatible. They can effectively retain nutrients for the plant and can be used as soil conditioners. This study uses a chemical cross-linking technique to synthesize starch and chitosan-based hydrogel using citric acid as a cross-linker. Additionally, hydrogel composites were developed by incorporating wood ash, nano-cellulose, and NPK (nitrogen-phosphorus-potassium) fertilizer as fillers to enhance their properties. The formulated hydrogel/hydrogel composite samples were characterized by FTIR spectroscopy, SEM analysis, X-ray diffraction and thermo-gravimetric analysis. The experiment results showed the chemical cross-linking among the polymeric chain and the semi-crystalline nature of the hydrogel/hydrogel composite samples. The swelling capacity of the hydrogel/hydrogel composite samples was 200-420% (in distilled water) and 104-220% (in saline medium) and demonstrated biodegradability within 110 days. The NPK reinforced hydrogel composite showed an excellent effect on the growth of pea plants (leaves count = 37, stem height = 20.2 cm), and could be effectively used as soil conditioners for agricultural applications. Considering the ability of hydrogel composites to reduce irrigation needs, enhance nutrient retention, and improve crop production, these novel hydrogel composites present an economically viable solution for sustainable agricultural practices.
RESUMO
With the increase in global plastic pollution due to conventional plastic packaging (petroleum-derived), bioplastics have emerged as an alternative green source for practising a circular economy. This research aimed to extract cellulose from bagasse and corn cob waste and utilized in mixed form to prepare bioplastic film. The mixed cellulose was further reinforced with natural substances such as chitosan, bentonite, and P. alba extract. These newly developed bioplastics films were characterized by various physical tests like film thickness, moisture content, water solubility and spectroscopic techniques such as Fourier transform infrared (FTIR), scanning electron microscopy-energy dispersive spectroscopic (SEM-EDX), thermal gravimetric analysis (TGA), and ultraviolet-visible (UV-Vis) spectroscopy for opacity testing. The results revealed the enhanced bioplastic thermal and mechanical characteristics through robust interactions between cellulose and bentonite molecules. Moreover, incorporating chitosan solution as reinforcements in bio-composite films resulted in improved water barrier properties. The results indicated lower absorption in the UV range of 250-400 nm, attributed to the absence of UV-absorbing groups. Finally, their biodegradability was tested in soil, and 85.3 % weight loss of bioplastic films was observed after 50 days of the experiment which is the main task of this research. The antimicrobial properties of bioplastic films have been evaluated, and showed an inhibition zone of 16 mm against E. coli. After 12 days of incubation of sherbet berries, complete spoilage is identified in the control group compared to those covered with the bioplastic film. This outcome is attributed to the antioxidant and antimicrobial activities provided by chitosan and P. alba extract in the bioplastic film. The comprehensive outcomes of this study suggest the potential future adoption of these entirely bio-derived, environmentally sustainable and biodegradable bioplastic films as a viable substitute for the plastic packaging currently present in the market.
Assuntos
Celulose , Quitosana , Embalagem de Alimentos , Extratos Vegetais , Zea mays , Celulose/química , Quitosana/química , Embalagem de Alimentos/métodos , Extratos Vegetais/química , Extratos Vegetais/farmacologia , Zea mays/química , Anti-Infecciosos/química , Anti-Infecciosos/farmacologia , Solubilidade , Resíduos , Biodegradação Ambiental , Plásticos Biodegradáveis/química , Plásticos Biodegradáveis/farmacologiaRESUMO
The field of dentistry has seen various technological advances regarding caries detection, some lesions still prove to be difficult to detect. A reasonably new detection method, near-infrared (NIR), has shown good results in caries detection. This systematic review aims to compare NIR with conventional methods in terms of caries detection. Online databases (PubMed, Scopus, ScienceDirect, EBSCO, and ProQuest) were used for the literature search. The search was performed from January 2015 till December-2020. A total of 770 articles were selected, of that 17 articles qualified for the final analysis as per Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. The articles were assessed according to a modified Critical Appraisal Skills Programme checklist, and then synthesis of the review started. The inclusion criteria were clinical trials done in vivo on teeth with active caries of vital or nonvital teeth. This review excluded nonpeer reviewed articles, case reports, case series, opinions, abstracts, non-English written articles, studies of subjects with arrested caries, or teeth with developmental defects of tooth structure and teeth having environmental defects of tooth structure, as well as in-vitro studies. The review compared near-infrared technology with radiography, visual inspection, and laser fluorescence in terms of caries detection, sensitivity, specificity, and accuracy. The sensitivity of NIR ranged from 99.1 to 29.1%. Studies showed that NIR exhibited higher sensitivity for occlusal enamel and dentin caries. The specificity of NIR ranged from 94.1 to 20.0%. In enamel and dentinal occlusal caries, NIR demonstrated lower specificity than that of radiograph. The specificity of NIR in early proximal caries was low. Accuracy was determined in 5 out of 17 studies where the values ranged from 97.1 to 29.1%. The accuracy of NIR was the highest for dentinal occlusal caries. NIR shows promising evidence as an adjunct in caries examination due to its high sensitivity and specificity; however, more studies are required to determine its full potential in different situations.
RESUMO
The search for novel drug scaffolds that can improve effectiveness and safety through drug conjugates is a promising approach. Consequently, drug conjugates constitute a dynamic field of study and advancement within medicinal chemistry. This research demonstrates the conjugation of diclofenac and mefenamic acid with sulfa drugs and their screening for urease inhibition. These conjugates' structural confirmation was performed using elemental analysis and spectroscopic methods, including IR, 1H NMR, and 13C NMR. Diclofenac conjugated with sulfanilamide (4), sulfacetamide (10), and mefenamic acid conjugated with sulfanilamide (12), and sulfamethoxazole (17) was found potent and demonstrated urease inhibition competitively, with IC50 (µM) values 3.59 ± 0.07, 5.49 ± 0.34, 7.92 ± 0.27, and 8.35 ± 0.26, respectively. Diclofenac conjugated with sulfathiazole (6), sulfamerazine (8), and sulfaguanidine (11), while mefenamic acid conjugated with sulfisoxazole (13), sulfathiazole (14), and sulfadiazine (15) exhibited a mixed mode of urease inhibition. The IC50 (µM) values were 16.19 ± 0.21, 9.50 ± 0.28, 4.35 ± 0.23, 15.86 ± 0.25, 14.80 ± 0.27, and 7.92 ± 0.27, respectively. Furthermore, molecular docking studies were employed to predict the binding pose of competitive inhibitors at the urease active site. These conjugates generated stable complexes with the urease protein observed through molecular dynamics (MD) simulations, where no conformational changes occurred throughout the simulations. These results highlight the potential for approved therapeutic molecule conjugates to give rise to new categories of pharmacological agents for urease inhibition. The structural similarity of sulfonamides with urea allows them to compete with urea for binding to the active site of the urease enzyme. Sulfonamides and nonsteroidal anti-inflammatory drugs (NSAIDs) can interact hydrophobically with the active site of the urease enzyme, which may disturb its structure and catalytic activity. Therefore, these conjugates may be helpful in the development of novel pharmacological agents for the treatment of a variety of illnesses in which the urease enzyme is involved.
RESUMO
Orthopedic implants are an important tool in the treatment of musculoskeletal conditions and helped many patients to improve their quality of life. Various inorganic-organic biocomposites have been broadly investigated particularly in the area of load-bearing orthopedic/dental applications. Polyimide (PI) is a promising organic material and shows excellent mechanical properties, biocompatibility, bio-stability, and its elastic modulus is similar to human bone but it lacks bioactivity, which is very important for cell adhesion and ultimately for bone regeneration. In this research, tantalum pentoxide (Ta2O5) coating was prepared on the surface of PI by polydopamine (PDA) bonding. The results showed that Ta2O5 was evenly coated on the surface of PI, and with the concentration of Ta2O5 in the PDA suspension increased, the content of Ta2O5 particles on the surface of PI increased significantly. In addition, the Ta2O5 coating significantly increased the roughness and hydrophilicity of the PI matrix. Cell experiments showed that PI surface coating Ta2O5 could promote the proliferation, adhesion, and osteogenic differentiation of bone marrow-derived stromal cells (BMSCs). The results demonstrated that fabricating Ta2O5 coating on the surface of PI through PDA bonding could improve the biocompatibility as well as bioactivity of PI, and increase the application potential of PI in the field of bone repair materials.
RESUMO
In recent years, there has been a growing concern about the negative impact of unforeseen contaminants such as metals in commonly consumed food items, which pose a threat to human well-being. Therefore, it is of utmost importance to evaluate the levels of these contaminants to guarantee the safe consumption of these food items. The goal of the current research is to determine the levels of essential (EMs: Mg, Ca, Mn, Fe, Co, Cu, and Zn) and potentially toxic metals (PTMs: Al, Cr, Ni, As, Cd, and Pb) in various brands of wheat-based sweets. One hundred samples were collected and analysed via flame atomic absorption spectrometry (FAAS) and inductively coupled plasma-optical emission spectrometry (ICP-OES). Also, the current study was to investigate the distribution, correlation, and multivariate analysis of 13 metals (Mg, Ca, Mn, Fe, Co, Cu, Zn, Al, Cr, Ni, As, Cd, and Pb). Hierarchical cluster analysis (HCA) and principal component analysis (PCA) were used to interpret the metals' association. The concentration (mg/kg) ranges of EMs were, in order, Mg (12.70-65.67), Ca (24.02-209.12), Mn (1.32-9.61), Fe (4.55-111.23), Co (0.32-8.94), Cu (2.12-8.61), and Zn (2.60-19.36), while the concentration (mg/kg) ranges of PTMs were, in order, Al (0.32-0.87), Cr (0.17-5.74), Ni (0.36-1.54), Cd (0.16-0.56), and Pb (0.14-0.92), and As was not detected in any sample under investigation. The HCA data revealed that Co, Al, and Ni form clusters with other metals. Sweets are prepared at high temperatures, and the elevated temperatures can increase the likelihood of Ni and Al leaching from stainless steel. Tolerable dietary intake (TDI) values for Ni were higher than the values established by the European Food Safety Authority (EFSA). The CR value found for the Ni and Cr was at the threshold level of cancer risk, if an amount of 25 g were to be used over a lifetime. In a nutshell, this study highlights the monitoring of EM and PTM levels in wheat-based sweets, and from a food safety perspective, the study is important for consumers of wheat-based sweets.
Assuntos
Metais Pesados , Humanos , Metais Pesados/análise , Triticum , Cádmio/análise , Chumbo/análise , Intoxicação por Metais Pesados , Análise Multivariada , Monitoramento Ambiental/métodos , Medição de RiscoRESUMO
AIMS: To evaluate the effect of adding vanillin nanoparticles on the antimicrobial and mechanical properties of the orthodontic adhesive. MATERIALS AND METHODS: Transbond XT orthodontic adhesive (3M Unitek, Monrovia, California, USA) was modified with 1% and 2% vanillin nanoparticles. The chemical composition and degree of chemical conversion in orthodontic adhesive before and after adding vanillin nanoparticles to orthodontic adhesive were measured using Fourier transformation infrared spectroscopy (FTIR). Mechanical properties of unmodified orthodontic adhesive (UMOA) and 1% and 2% vanillin-modified orthodontic adhesive (VMOA) were assessed in shear bond strength (SBS) and tensile bond strength (TBS). The antimicrobial properties were evaluated using a Mueller-Hinton plate swapped with streptococcus mutans. The zone of bacterial inhibition for UMOA, 1% VMOA, and 2% VMOA was measured. Descriptive statistics, multiple comparisons, one-way ANOVA, and post hoc Duncan's test were used to compare among the results. RESULTS: FTIR showed no chemical conversion of 1% VMOA and 2% VMOA. There was significant streptococcus mutans growth inhibition in 1% VMOA and 2% VMOA compared to UMOA. No significant difference in streptococcus mutans growth inhibition in 1% VMOA and 2% VMOA. The SBS decreased significantly in 1% VMOA compared to UMOA. In addition, SBS decreased insignificantly when comparing 1% VMOA and 2% VMOA. TBS significantly reduced in 2% VMOA compared with UMOA. In addition, there was no significant difference in TBS between UMOA and 1% VMOA, and 1% VMOA and 2% VMOA, respectively. CONCLUSIONS: The 1% VMOA has improved antimicrobial properties and kept mechanical properties of orthodontic adhesive within the acceptable level.
RESUMO
Hydrogels are three-dimensional polymer networks that are hydrophilic and capable of retaining a large amount of water. Hydrogels also can act as vehicles for the controlled delivery of active compounds. Bio-polymers are polymers that are derived from natural sources. Hydrogels prepared from biopolymers are considered non-toxic, biocompatible, biodegradable, and cost-effective. Therefore, bio-polymeric hydrogels are being extensively synthesized and used all over the world. Hydrogels based on biopolymers finds important applications in the agricultural field where they are used as soil conditioning agents as they can increase the water retention ability of soil and can act as a carrier of nutrients and other agrochemicals. Hydrogels are also used for the controlled delivery of fertilizer to plants. In this review, bio-polymeric hydrogels based on starch, chitosan, guar gum, gelatin, lignin, and alginate polymer have been discussed in terms of their synthesis method, swelling behavior, and possible agricultural application. The urgency to address water scarcity and the need for sustainable water management in agriculture necessitate the exploration and implementation of innovative solutions. By understanding the synthesis techniques and factors influencing the swelling behavior of these hydrogels, we can unlock their full potential in fostering sustainable agriculture and mitigating the challenges posed by an ever-changing environment.
RESUMO
Derivative synthesis has been a crucial method for altering the effects of already-approved medications, especially to lessen adverse effects and enhance results. Making use of this multi-target approach, a series of naproxen-sulfa drug conjugates was designed and synthesized. The newly designed conjugates were confirmed by spectroscopic techniques like IR, 1HNMR, 13CNMR, and elemental analysis. The conjugates were screened for anti-inflammatory, urease, and cyclooxygenase-2 (COX-2) inhibition. Naproxen conjugated with sulfanilamide, sulfathiazole, and sulfaguanidine was found potent and showed a competitive mode of urease inhibition, with IC50 (µM) values 6.69 ± 0.11, 5.82 ± 0.28, 5.06 ± 0.29, respectively. When compared to other screened conjugates, the naproxen-sulfamethoxazole conjugation showed better anti-inflammatory action by inhibiting induced edema by 82.8%, which is comparable to the medication indomethacin (86.8% inhibition). Whereas it exhibited 75.4% inhibition of COX-2 at 10 µM concentration which is comparable with the reference drug (celecoxib, 77.1% inhibition). Moreover, the binding modes of competitive inhibitors with the urease and COX-2 receptor were predicted through molecular docking studies and their stability analysis through MD simulations showed that these compounds made stable complexes with the respective targets and there were no conformational changes that occurred during simulation. The obtained results showed that the conjugates of approved therapeutic molecules may lead to the development of novel types of pharmacological agents in the treatment of several pathological disorders where urease and COX-2 enzymes are involved.
RESUMO
To explore the new mode of action and reduce side effects, making conjugates of existing drugs is becoming an attractive tool in the realm of medicinal chemistry. In this work, we exploited this approach and synthesized new conjugates to assess their activities against the enzymes involved in different pathological conditions. Specifically, we design and synthesized conjugates involving acetylsalicylic acid and sulfa drugs, validating the newly crafted conjugates using techniques like IR, 1HNMR, 13CNMR, and elemental analysis. These conjugates underwent assessment for their ability to inhibit cyclooxygenase-2 (COX-2), urease enzymes, and their anti-inflammatory potential. A competitive mode of urease inhibition was observed for acetylsalicylic acid conjugated with sulfanilamide, sulfacetamide, and sulfadiazine with IC50 of 2.49 ± 0.35 µM, 6.21 ± 0.28 µM, and 6.57 ± 0.44 µM, respectively. Remarkably, the acetylsalicylic acid-sulfamethoxazole conjugate exhibited exceptional anti-inflammatory activity, effectively curtailing induced edema by 83.7%, a result akin to the reference anti-inflammatory drug indomethacin's performance (86.8%). Additionally, it demonstrated comparable COX-2 inhibition (75.8%) to the reference selective COX-2 inhibitor celecoxib that exhibited 77.1% inhibition at 10 µM concentration. To deepen our understanding, we employed molecular docking techniques to predict the binding interactions of competitive inhibitors with COX-2 and urease receptors. Additionally, MD simulations were carried out, confirming the stability of inhibitor-target complexes throughout the simulation period, devoid of significant conformational changes. Collectively, our research underscores the potential of coupling approved medicinal compounds to usher in novel categories of pharmacological agents, holding promise for addressing a wide spectrum of pathological disorders involving COX-2 and urease enzymes.Communicated by Ramaswamy H. Sarma.
RESUMO
The development of novel scaffolds that can increase the effectiveness, safety, and convenience of medication therapy using drug conjugates is a promising strategy. As a result, drug conjugates are an active area of research and development in medicinal chemistry. This research demonstrates acetamide-sulfonamide scaffold preparation after conjugation of ibuprofen and flurbiprofen with sulfa drugs, and these scaffolds were then screened for urease inhibition. The newly designed conjugates were confirmed by spectroscopic techniques such as IR, 1HNMR, 13CNMR, and elemental analysis. Ibuprofen conjugated with sulfathiazole, flurbiprofen conjugated with sulfadiazine, and sulfamethoxazole were found to be potent and demonstrated a competitive mode of urease inhibition, with IC50 (µM) values of 9.95 ± 0.14, 16.74 ± 0.23, and 13.39 ± 0.11, respectively, and urease inhibition of 90.6, 84.1, and 86.1% respectively. Ibuprofen conjugated with sulfanilamide, sulfamerazine, and sulfacetamide, whereas flurbiprofen conjugated with sulfamerazine, and sulfacetamide exhibited a mixed mode of urease inhibition. Moreover, through molecular docking experiments, the urease receptor-binding mechanisms of competitive inhibitors were anticipated, and stability analysis through MD simulations showed that these compounds made stable complexes with the respective targets and that no conformational changes occurred during the simulation. The findings demonstrate that conjugates of approved therapeutic molecules may result in the development of novel classes of pharmacological agents for the treatment of various pathological conditions involving the urease enzyme.
Assuntos
Flurbiprofeno , Simulação de Acoplamento Molecular , Flurbiprofeno/farmacologia , Ibuprofeno/farmacologia , Inibidores Enzimáticos/farmacologia , Sulfacetamida , Cinética , Urease , Sulfamerazina , Canavalia , Relação Estrutura-Atividade , Sulfanilamida , Sulfonamidas/farmacologia , Estrutura MolecularRESUMO
Curcumin is an extensively studied natural compound due to its extensive biological applications. However, there are some drawbacks linked to this compound such as poor absorption, low water-solubility, quick systemic elimination, fast metabolism, poor pharmacokinetics, low bioavailability, low penetration targeting efficacy and low stability. To overcome these drawbacks, curcumin is encapsulated in nano-carriers. In the current studies, we synthesized nanoparticles of curcumin without using nanocarriers by different methods such as nano-suspension (Cur-NSM), sonication (Cur-SM) and anti-solvent precipitation (Cur-ASP) to enhance the solubility of curcumin in water. The prepared nanoparticles were characterized by FTIR, SEM and XRD analysis. These curcumin nanoparticles were screened for their solubilities in water, DPPH scavenging, amylase, α-glucosidase and ß-glucosidase enzymatic activities. The particle size of nano-curcumin was found to be in the 47.4-98.7 nm range. The reduction in particle size of curcumin dramatically increases its solubility in water to 79.2 µg mL-1, whereas the solubility of curcumin is just 0.98 µg mL-1. Cur-ASP showed the highest free radical scavenging potential (48.84 ± 0.98%) which was comparable with standard BHT (50.48 ± 1.11%) at 75.0 µg mL-1. As well, Cur-ASP showed the highest inhibition of α-amylase (68.67 ± 1.02%), α-glucosidase (58.30 ± 0.52%), and ß-glucosidase (64.80 ± 0.43%) at 100 µg mL-1 which is comparable with standard drug acarbose. The greater surface area of nanoparticles exposes the various groups of curcumin for blocking the binding sites of enzymes. This strategy may be helpful in designing curcumin as a potent therapeutic agent against diabetes mellitus. Further, the molecular interactions of curcumin with α-amylase, α-glucosidase, ß-glucosidase, and polyphenol oxidase were assessed by analyzing the plausible binding modes of curcumin in the binding pocket of each receptor. The best binding mode of curcumin was used to make complexes with the target proteins and their stability was confirmed by 50 ns MD simulation.