From herbicide to flame retardant: The lamellar-like phosphorus-bridged amitrole toward high fire safety epoxy resin with light smoke and low toxicity.

In an attempt to alleviate the harmful impact of the flammability of epoxy resin on the environment, amitrole, a herbicide, has been converted to a novel flame retardant (PBA) with lamellar morphology through organophosphorus modification. This material has been utilized to fabricate fire safe epoxy thermosets (EP). EP containing 7.5 wt% PBA undergoes quick self-extinguishment upon ignition. This blend displays a high limiting oxygen index (LOI) value of 34%. More importantly, hazardous products (heat, smoke, toxic gases including CO/CO2) released during combustion of EP, are strongly suppressed in the presence of PBA. The mechanical properties of EP-PBA blends are comparable to those of virgin EP. The tensile strength of EP containing PBA is 90% of that of unmodified EP. The flexural strength of PBA blends is somewhat greater than that for EP containing no additive. A tactful strategy for the transformation of amitrole, a potential environmental contaminant to a benign flame retardant for polymers has been developed.

Single component phosphamide-based intumescent flame retardant with potential reactivity towards low flammability and smoke epoxy resins.

To develop a low flammability and smoke epoxy resin, benzothiazole-based phosphamide (DOP-ABZ) was prepared through the reaction of 2-chloro-5,5-dimethyl-1,3,2-dioxaphosphinane-2-oxide (DOP) and 2-aminobenzothiazole (ABZ). Intumescent flame-retardant (IFR) epoxy thermosets (EP) with different loadings of DOP-ABZ were prepared according to the assigned curing procedure. The thermal stability of IFR-EP decreased as compared to that of EP, but the flame retardancy of IFR-EP were greatly improved. EP/20 wt% DOP-ABZ passed UL-94 V-0 rating and got a high LOI value of 28.3%. Meanwhile, cone calorimeter tests showed that the heat release rate greatly decreased from 1139.7 kW/m2 of EP to 238.9 kW/m2, and the productions of smoke/toxic gases including CO and CO2 were also remarkably reduced. Furthermore, the mechanical strength of EP/17.5 wt% DOP-ABZ was enhanced to some extent, i.e. tensile strength increased from 71 MPa of EP to 81 MPa, flexural strength from 98 to 119 MPa, and impact strength from 22 to 32 kJ/m2. Finally, the flame-retardant mechanism was disclosed that DOP-ABZ produced phosphorus-containing acids so as to dehydrate and carbonize epoxy macromolecules leading to the formation of graphitized chars. Meanwhile, the nitrogen/sulfur-containing intermediates simultaneously released noncombustible gases to expand the as-formed char, and then interrupt the combustion reaction.

Novel Dihydroxy-Containing Ammonium Phosphate Based Poly(Lactic Acid): Synthesis, Characterization and Flame Retardancy.

The aim of this work is to prepare flame-retardant biobased poly(lactic acid) materials through incorporating a novel flame retardant dihydroxy-containing ammonium phosphate (DAP) derived from 2-chloro-5,5-dimethyl-1,3,2-dioxaphosphinane-2-oxide (DOP) and 2-amino-2-methyl-1,3-propanediol (AMPD). Interestingly, PLA modified with only 0.5% DAP passed UL-94 V-0 rating, and possessed a limiting oxygen index (LOI) value of 24.6%, which would further increase with the increasing loading of DAP. PLA/DAP did not exhibit obviously improved results in terms of heat release rate (HRR), as the loading of DAP was relatively low. It was found that DAP showed little effect on the thermal stability of PLA and the onset decomposition temperatures of PLA and PLA/DAP blends were very close. Besides, the degree of crystallization increased because of the plasticized effect of DAP. Based on the analyses of flame-retardant mechanism of DAP, it disclosed that DAP decomposed to generate incombustible compounds, such as water and ammonia, to dilute the concentration of oxygen and fuels, and then release some phosphorus-containing fragments that could produce phosphorus-containing free radicals to interrupt free-radical reactions, and finally noncombustible melt dripping was produced so as to bring away large amount of heat and stop the feedback of heat to the matrix.