RESUMO
Mycelium-based bio-composites (MBCs) represent a sustainable and innovative material with high potential for contemporary applications, particularly in the field of modern interior design. This research investigates the fabrication of MBCs for modern interior materials using agro-industrial wastes (bamboo sawdust and corn pericarp) and different fungal species. The study focuses on determining physical properties, including moisture content, shrinkage, density, water absorption, volumetric swelling, thermal degradation, and mechanical properties (bending, compression, impact, and tensile strength). The results indicate variations in moisture content and shrinkage based on fungal species and substrate types, with bamboo sawdust exhibiting lower shrinkage. The obtained density values range from 212.31 to 282.09 kg/m3, comparable to traditional materials, suggesting MBCs potential in diverse fields, especially as modern interior elements. Water absorption and volumetric swelling demonstrate the influence of substrate and fungal species, although they do not significantly impact the characteristics of interior decoration materials. Thermal degradation analysis aligns with established patterns, showcasing the suitability of MBCs for various applications. Scanning electron microscope observations reveal the morphological features of MBCs, emphasizing the role of fungal mycelia in binding substrate particles. Mechanical properties exhibit variations in bending, compression, impact, and tensile strength, with MBCs demonstrating compatibility with traditional materials used in interior elements. Those produced from L. sajor-caju and G. fornicatum show especially promising characteristics in this context. Particularly noteworthy are their superior compression and impact strength, surpassing values observed in certain synthetic foams multiple times. Moreover, this study reveals the biodegradability of MBCs, reaching standards for environmentally friendly materials. A comprehensive comparison with traditional materials further supports the potential of MBCs in sustainable material. Challenges in standardization, production scalability, and market adoption are identified, emphasizing the need for ongoing research, material engineering advancements, and biotechnological innovations. These efforts aim to enhance MBC properties, promoting sustainability in modern interior applications, while also facilitating their expansion into mass production within the innovative construction materials market.
RESUMO
The growing demand for environmentally friendly and sustainable materials has led to the invention of innovative solutions aiming to reduce negative impacts on the environment. Mycelium-based green composites (MBCs) have become an alternative to traditional materials due to their biodegradability and various potential uses. Although MBCs are accepted as modern materials, there are concerns related to some of their physical and mechanical properties that might have limitations when they are used. This study investigates the effects of using paper waste to improve MBC properties. In this study, we investigated the physical and mechanical properties of MBCs produced from lignocellulosic materials (corn husk and sawdust) and mushroom mycelia of the genus Lentinus sajor-caju TBRC 6266, with varying amounts of paper waste added. Adding paper waste increases the density of MBCs. Incorporating 20% paper waste into corn husks led to the enhancement of the compression, bending, and impact strength of MBCs by over 20%. Additionally, it was also found that the MBCs produced from corn husk and 10% paper waste could help in reducing the amount of water absorbed into the material. Adding paper waste to sawdust did not improve MBC properties. At the same time, some properties of MBCs, such as low tensile strength and high shrinkage, might need to be further improved in the future to unlock their full potential, for which there are many interesting approaches. Moreover, the research findings presented in this publication provide a wealth of insightful information on the possibility of using paper waste to improve MBC performance and expand their suitability for a range of applications in sustainable packaging materials and various home decorative items. This innovative approach not only promotes the efficient utilization of lignocellulosic biomass but also contributes to the development of environmentally friendly and biodegradable alternatives to traditional materials.
RESUMO
Mycelium-based composites (MBCs) are characterized as biodegradable materials derived from fungal species. These composites can be employed across a range of industrial applications that involve the manufacturing of packaging materials as well as the manufacturing of buildings, furniture, and various other household items. However, different fungal species and substrates can directly affect the functional properties of MBCs, which ultimately vary their potential to be used in many applications. In this study, the mechanical, physical, and chemical properties of MBCs made from four different fungal species (Ganoderma fornicatum, Ganoderma williamsianum, Lentinus sajor-caju, and Schizophyllum commune) combined with three different types of lignocellulosic residues (sawdust, corn husk, and rice straw) were investigated. The results indicate that differences in both the type of lignocellulosic residues and the fungal species could affect the properties of the obtained MBCs. It was found that the MBCs obtained from sawdust had the highest degree of density. Moreover, MBCs obtained from S. commune with all three types of lignocellulosic residues exhibited the highest shrinkage value. The greatest degree of water absorption was observed in the MBCs obtained from rice straw, followed by those obtained from corn husk and sawdust. Additionally, the thermal degradation ability of the MBCs was observed to be within a range of 200 to 325 °C, which was in accordance with the thermal degradation ability of each type of lignocellulosic residue. The greatest degrees of compressive, flexural, impact, and tensile strength were observed in the MBCs of G. williamsianum and L. sajor-caju. The results indicate that the MBCs made from corn husk, combined with each fungal species, exhibited the highest values of flexural, impact, and tensile strength. Subsequently, an analysis of the chemical properties indicated that the pH value, nitrogen content, and organic matter content of the obtained MBCs were within the following ranges: 4.67−6.12, 1.05−1.37%, and 70.40−86.28%, respectively. The highest degree of electrical conductivity was observed in MBCs obtained from rice straw. Most of the physical and mechanical properties of the obtained MBCs were similar to those of polyimide and polystyrene foam. Therefore, these composites could be used to further develop relevant strategies that may allow manufacturers to effectively replace polyimide and polystyrene foams in the future.
RESUMO
Fungi are an understudied resource possessing huge potential for developing products that can greatly improve human well-being. In the current paper, we highlight some important discoveries and developments in applied mycology and interdisciplinary Life Science research. These examples concern recently introduced drugs for the treatment of infections and neurological diseases; application of -OMICS techniques and genetic tools in medical mycology and the regulation of mycotoxin production; as well as some highlights of mushroom cultivaton in Asia. Examples for new diagnostic tools in medical mycology and the exploitation of new candidates for therapeutic drugs, are also given. In addition, two entries illustrating the latest developments in the use of fungi for biodegradation and fungal biomaterial production are provided. Some other areas where there have been and/or will be significant developments are also included. It is our hope that this paper will help realise the importance of fungi as a potential industrial resource and see the next two decades bring forward many new fungal and fungus-derived products.
RESUMO
The continually expanding use of plastic throughout our world, along with the considerable increase in agricultural productivity, has resulted in a worrying increase in global waste and related environmental problems. The reuse and replacement of plastic with biomaterials, as well as the recycling of agricultural waste, are key components of a strategy to reduce plastic waste. Agricultural waste is characterized as lignocellulosic materials that mainly consist of cellulose, hemicellulose, and lignin. Saprobe fungi are able to convert agricultural waste into nutrients for their own growth and to facilitate the creation of mycelium-based composites (MBC) through bio-fabrication processes. Remarkably, different fungal species, substrates, and pressing and drying methods have resulted in varying chemical, mechanical, physical, and biological properties of the resulting composites that ultimately vary the functional aspects of the finished MBC. Over the last two decades, several innovative designs have produced a variety of MBC that can be applied across a range of industrial uses including in packaging and in the manufacturing of household items, furniture, and building materials that can replace foams, plastics, and wood products. Materials developed from MBC can be considered highly functional materials that offer renewable and biodegradable benefits as promising alternatives. Therefore, a better understanding of the beneficial properties of MBC is crucial for their potential applications in a variety of fields. Here, we have conducted a brief review of the current findings of relevant studies through an overview of recently published literature on MBC production and the physical, mechanical, chemical, and biological properties of these composites for use in innovative architecture, construction, and product designs. The advantages and disadvantages of various applications of mycelium-based materials (MBM) in various fields have been summarized. Finally, patent trends involving the use of MBM as a new and sustainable biomaterial have also been reviewed. The resulting knowledge can be used by researchers to develop and apply MBC in the form of eco-friendly materials in the future.
RESUMO
Gummy stem blight and wilt are known to cause enormous losses to the global production of muskmelon (Cucumis melo). In this study, the potential of endophytic fungi isolated from leaves of Siam weed (Chromolaena odorata) was investigated for the inhibition of mycelial growth of Stagonosporopsis cucurbitacearum and Fusarium equiseti. Twenty-one fungal isolates were obtained. The results indicated that a fungal isolate UP-L1I3 displayed the highest percentage in terms of inhibition of the mycelial growth of F. equiseti and S. cucurbitacearum at 90.80 and 81.60%, respectively. Consequently, this isolate was selected for its potential ability to promote plant growth and control gummy stem blight and wilt in muskmelon seedlings. Morphological and multilocus phylogenetic analyses revealed that the isolate UP-L1I3 was a new species that has been described herein as Trichoderma phayaoense. Pathogenicity test confirmed that F. equiseti and S. cucurbitacearum were the cause of gummy stem blight and wilt disease in muskmelon seedlings, respectively. However, no disease symptoms were observed in seedlings inoculated with T. phayaoense. It was found that T. phayaoense could be used preventively in muskmelon seedlings that were inoculated with F. equiseti and S. cucurbitacearum, which could then reduce the impact on the disease severity index. T. phayaoense was also effective in improving plant development by increasing plant height, as well as shoot and root dry weight values. Moreover, T. phayaoense could effectively increase weight, diameter, and the circumference and total soluble solid of fruit without having a negative effect on fruit quality parameters. Additionally, T. phayaoense was able to tolerate a commonly applied fungicide (metalaxyl) in recommended dosages for field applications.
