Insights into the Structure of Sucralfate by Advanced Solid- and Liquid-State NMR.

Sucralfate, which is a sucrose octasulfate aluminum complex, is an active pharmaceutical ingredient (API) falling in the category of cytoprotective agents which are very effective for gastric and duodenal ulcers. On interaction with stomach acid, it ionizes into aluminum and sucrose octasulfate ions to form a protective layer over the ulcerated region inhibiting further attack from acid. The mechanism of action of sucralfate in the context of its structure is not well understood. Considering that at least two forms of this API are available in the market, there are no reports on the various forms of sucralfate and differences in their pharmacological action. We characterized the two forms of sucralfate using multinuclear, multidimensional solid-state NMR, and the results show significant structural differences between them arising from variation in the aluminum environment and the level of hydration. The impact of structural differences on pharmacological action was examined by studying acid-induced Al release by 27Al liquid-state NMR. The sucralfate, European pharmaceutical standard, Form I, undergoes faster disruption in acid compared to Form II. The difference is explained on the basis of structural differences in the two forms which gives significant insights into the action of sucralfate in relation to its structure.

In Situ Monitoring of Competitive Coformer Exchange Reaction by 1H MAS Solid-State NMR.

In a competitive coformer exchange reaction, a recent topic of interest in pharmaceutical research, the coformer in a pharmaceutical cocrystal is exchanged with another coformer that is expected to form a cocrystal that is more stable. There will be a competition between coformers to form the most stable product through the formation of hydrogen bonds. This will cause destabilization of the pharmaceutical products during processing or storage. Therefore, it is important to develop a mechanistic understanding of this transformation by monitoring each and every step of the reaction, employing a technique such as 1H nuclear magnetic resonance (NMR). In this study, an in situ monitoring of a coformer exchange reaction is carried out by 1H magic angle spinning (MAS) solid-state NMR (SSNMR) at a spinning frequency of 60 kHz. The changes in caffeine maleic acid cocrystals on addition of glutaric acid and caffeine glutaric cocrystals on addition of maleic acid were monitored. In all of the reactions, it has been observed that caffeine glutaric acid Form I is formed. When glutaric acid was added to 2:1 caffeine maleic acid, the formation of metastable 1:1 caffeine glutaric acid Form I was observed at the start of the experiment, indicating that the centrifugal pressure is enough for the formation. The difference in the end product of the reactions with a similar reaction pathway of 1:1 and 2:1 reactant stoichiometry indicates that a complete replacement of maleic acid has occurred only in the 1:1 stoichiometry of the reactants. The polymorphic transition of caffeine glutaric acid Form II to Form I at higher temperatures was a crucial reason that triggered the exchange of glutaric acid with maleic acid in the reaction of caffeine glutaric acid and maleic acid. Our results are novel since the new reaction pathways in competitive coformer exchange reactions enabled understanding the remarkable role of stoichiometry, polymorphism, temperature, and centrifugal pressure.

A solid-state NMR method for characterization of pharmaceutical eutectics.

Pharmaceutical eutectics are extremely useful for designing formulations, and currently, there are no techniques other than differential scanning calorimetry (DSC) that can confirm their formation. In this study, we demonstrate that 1H fast magic angle spinning (MAS) solid-state NMR (SSNMR) experiments can confirm the formation of eutectics by detecting their intermolecular hydrogen bonding interactions.

An investigation of Al2O3 induced variations in the structural parameters in strontium borosilicate glasses using solid state NMR.

The physical properties of oxide glasses are crucially dependent on the atomistic structural speciation. In this study, we investigate the variation in the local ordering in the glass network of strontium borosilicate glasses (34.82 SrO, 51.84 B2O3, 13.34 SiO2 in mol%) with a progressive substitution of B2O3 by Al2O3 and estimate the structural parameters: the oxygen packing fraction, and the average network coordination number. The coordination of the network forming cations at various glass compositions is determined using 11B, 27Al, and 29Si solid-state nuclear magnetic resonance (SSNMR). The SSNMR reveals that at the higher substitution of B2O3 by Al2O3 in the glass composition, the coordination network of Al3+ exists predominantly in the 4 coordinated state, the network forming B3+ cations transform from a tetrahedral BO4 to a trigonal BO3 structure, and the Q4 form of silicates is dominant. The average coordination number and the oxygen packing fraction were calculated using the parameters obtained from the SSNMR results, and it is observed that the average coordination number decreases, and the oxygen packing fraction increases on incorporating Al. It is interesting to note that some of the thermophysical properties of these compositions closely follow the pattern shown by the average coordination number and the oxygen packing fraction.

Effect of oxalic acid and sulphuric acid hydrolysis on the preparation and properties of pineapple pomace derived cellulose nanofibers and nanopapers.

Nanocellulose is the "green magnet" which attracts a wide spectrum of industries towards it due to its availability, biodegradability, and possible smart applications. For the first time, pineapple pomace was being explored as an economic precursor for cellulose nanofibers. Nanofiber isolation was accomplished using a chemo-mechanical method and solution casting was adopted for the development of nanopapers. Moreover, the study examines the structural, optical, crystalline, dimensional, and thermal features of nanofibers isolated using different acid hydrolysis (oxalic acid and sulphuric acid) methods. Fourier-transform infra-red spectroscopy, 13C solid-state nuclear magnetic resonance spectroscopy, and X-ray diffraction analysis indicated the presence of type I cellulose. The transmittance, crystallinity index, and thermal stability of PPNFS (sulphuric acid treated fiber) were greater than PPNFO (oxalic acid treated fiber). The transmission electron microscopy and dynamic light scattering analysis confirmed the nanodimension of PPNFO and PPNFS. While comparing the optical and mechanical properties of nanopapers, PPNFS outperforms PPNFO. The tensile strength of the prepared nanopapers (64 MPa (PPNFO) and 68 MPa (PPNFS)) was found to be high compared to similar works reported in the literature. The prepared nanopaper is proposed to be used for food packaging applications.

Chlorine-free extraction and structural characterization of cellulose nanofibers from waste husk of millet (Pennisetum glaucum).

This study aims to extract cellulose nanofibers (CNFs) from a sustainable source, i.e. millet husk, which is an agro-waste worthy of consideration. Pre-treatments such as mercerisation, steam explosion, and peroxide bleaching (chlorine-free) were applied for the removal of non-cellulosic components. The bleached millet husk pulp was subjected to acid hydrolysis (5% oxalic acid) followed by homogenization to extract CNFs. The extracted CNFs were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Dynamic Light Scattering (DLS), Energy Dispersive X-ray Spectroscopy (EDX), Thermogravimetry (TG and DTG), Differential scanning calorimetry (DSC), and Solid state 13C nuclear magnetic resonance spectroscopy (solid state 13C NMR). The isolated CNFs show a typical cellulose type-I structure with a diameter of 10-12 nm and a crystallinity index of 58.5%. The appearance of the specific peak at 89.31 ppm in the solid state 13C NMR spectra validates the existence of the type-I cellulose phase in the prepared CNFs. The prepared CNFs had a maximum degradation temperature (Tmax) of 341 °C, that was 31 °C greater than raw millet husk (RMH). The outcome of the study implies that the nanofibers are prominent alternatives for synthetic fibers for assorted potential applications, especially in manufacturing green composites.

Correction: One pot ligand exchange method for a highly stable Au-SBA-15 catalyst and its room temperature CO oxidation.

Correction for 'One pot ligand exchange method for a highly stable Au-SBA-15 catalyst and its room temperature CO oxidation' by Yogita Soni et al., Chem. Commun., 2018, DOI: 10.1039/c8cc06887a.

Distribution of water in the pores of periodic mesoporous organosilicates - a proton solid state MAS NMR study.

Solid state proton (1H) magic angle spinning (MAS) NMR has been employed to study the distribution of confined water in ethane substituted periodic mesoporous organosilicate (PMOE) materials. Proton spectra acquired at different hydration levels are analysed and interpreted in terms of water clusters of various sizes and distributions of water layers on the pore surface. For comparison, we also performed similar experiments on SBA-15. The formation of larger clusters at lower hydration suggests that the pores of PMOE are getting filled with water at lower hydration levels than those in SBA-15. For PMOE, the simultaneous presence of two major resonances in the ranges 3.6-4.1 ppm and 4.4-5.2 ppm and their behaviour upon hydration imply a water layer distribution that is the sum of two contributions, corresponding to fully filled and partially filled pores or pore segments. Furthermore, the behaviour mentioned above suggests that both radial and axial filling mechanisms play a significant role in the hydration process. For SBA-15, as a function of hydration, we observed a smooth variation in the proton chemical shift of the main dynamic resonance. In accordance with previous studies, this is attributed to the gradual increase in the average thickness of water layers with an increase in hydration, and to a pore filling mechanism that is predominantly radial.

One pot ligand exchange method for a highly stable Au-SBA-15 catalyst and its room temperature CO oxidation.

A modified deposition precipitation (DP) method has been developed to address a fundamental issue of supporting well dispersed Au nanoparticles on silica. Ammonium chloride (NH4Cl) plays an important role in in situ modifying the gold precursor (HAuCl4·3H2O) solution allowing facile deposition of gold NPs in the channels of SBA-15. The Au-SBA-15 catalyst (2.8 wt%) synthesized by this procedure showed 100% conversion for CO oxidation at room temperature with excellent stability at room temperature and high temperature.

Highly reactive crystalline-phase-embedded strontium-bioactive nanorods for multimodal bioactive applications.

In the present work, a crystallization-induced strontium-bioactive material, with a composition similar to Bioglass 45S5 system, was obtained using a sol-gel-assisted microwave method with nanorod morphologies of 30-80 nm in size. The effect of crystallization induced in the glass network, and its influence on the bioactivity and mechanical properties of bone and dentin regeneration, were the main novel findings of this work. Rietveld analysis of X-ray diffraction spectra showed the best fit with sodium (combeite, Na2Ca2Si3O9) and calcium (clinophosinaite, Ca2Na6O14P2Si2; calcium strontium silicate, Ca1.5O4SiSr0.5; and calcium carbonate, CaCO3) enriched crystal systems. Multinuclear solid-state NMR studies provided detailed atomistic insight into the presence of crystalline mineral phases in the bioactive material. The dentin matrix and antibacterial studies showed good results for 5% strontium-substituted calcium compared with basic 45S5 composition due to its smaller particle size (30 nm), which suggested applications to dentin regeneration. Simulation studies have been demonstrated with clinophosinaite crystal data from the XRD spectra, with the glycoprotein salivary metabolites also showing that 5% strontium-substituted calcium has a higher binding affinity for the salivary compound, which is suitable for dentin regeneration applications. In vitro apatite formation studies showed that this material is suitable for bone regeneration applications.

Preparation of colourless phosphate glass by stabilising higher Fe[II] in microwave heating.

Iron impurity in raw material remains a major challenge in producing colourless glass. In this investigation, we report microwave (MW) heating capable of altering Fe-redox ratio (Fe2+/∑Fe) enabling preparation of colourless phosphate glass. The effect of Sn concentration in retention of Fe[II] in glass melted in MW was compared with conventional glasses. Colourimetric study developing Fe2+-ferrozine colour complex reveals Fe-redox ratio ≥0.49 required to obtain colourless phosphate glass. In microwave heating, addition of 1 wt.% Sn metal powder can impart the desired effect whereas addition of 1.9 wt.% Sn metal powder is required in conventional heating. The correlation equation of Fe-redox ratio with concentration of Sn metal is found to be different in microwave and conventional heating. Thus, exploiting this different redox changes in MW heating optical properties can be tailored. Preservation of higher Fe[II] in MW melted glass is also confirmed by XPS and TGA. 31P MAS NMR spectra suggest that transition from cross linked ultra phosphate to linear polymer metaphosphate network in incorporation of Sn is found different in glass prepared adopting microwave irradiation. 27A1 MAS NMR spectra suggest higher relative content of Al6+ in glass obtained from MW heating. Energy consumption analysis revels 3.4 kWh in MW heating while 14 kWh in conventional glass melting using resistance heating. Further, glass melting in MW can be completed within 2 h unlike ~5 h needed in conventional. MW heating plays a significant role in improving properties to make colourless phosphate glass in addition to significant energy and time saving.

Structural elucidation of NASICON (Na3Al2P3O12) based glass electrolyte materials: effective influence of boron and gallium.

Understanding the conductivity variations induced by compositional changes in sodium super ionic conducting (NASICON) glass materials is highly relevant for applications such as solid electrolytes for sodium (Na) ion batteries. In the research reported in this paper, NASICON-based NCAP glass (Na2.8Ca0.1Al2P3O12) was selected as the parent glass. The present study demonstrates the changes in the Na+ ion conductivity of NCAP bulk glass with the substitution of boron (NCABP: Na2.8Ca0.1Al2B0.5P2.7O12) and gallium (NCAGP: Na2.8Ca0.1Al2Ga0.5P2.7O12) for phosphorus and the resulting structural variations found in the glass network. For a detailed structural analysis of NCAP, NCABP and NCAGP glasses, micro-Raman and magic angle spinning-nuclear magnetic resonance (MAS-NMR) spectroscopic techniques (for 31P, 27Al, 23Na, 11B and 71Ga nuclei) were used. The Raman spectrum revealed that the NCAP glass structure is more analogous to the AlPO4 mesoporous glass structure. The 31P MAS-NMR spectrum illustrated that the NCAP glass structure consists of a high concentration of Q0 (3Al) units, followed by Q0 (2Al) units. The 27Al MAS-NMR spectrum indicates that alumina exists at five different sites, which include AlO4 units surrounded by AlO6 units, Al(OP)4, Al(OP)5, Al(OAl)6 and Al(OP)6, in the NCAP glass structure. The 31P, 27Al and 11B MAS-NMR spectra of the NCABP glass revealed the absence of B-O-Al linkages and the presence of B3-O-B4-O-P4 linkages which further leads to the formation of borate and borophosphate domains. The 71Ga MAS-NMR spectrum suggests that gallium cations in the NCAGP glass compete with the alumina cations and occupy four (GaO4), five (GaO5) and six (GaO6) coordinated sites. The Raman spectrum of NCAGP glass indicates that sodium cations have also been substituted by gallium cations in the NCAP glass structure. From impedance analysis, the dc conductivity of the NCAP glass (∼3.13 × 10-8 S cm-1) is slightly decreased with the substitution of gallium (∼2.27 × 10-8 S cm-1) but considerably decreased with the substitution of boron (∼1.46 × 10-8 S cm-1). The variation in the conductivity values are described based on the structural changes of NCAP glass with the substitution of gallium and boron.

Insights into the Molecular Dynamics in Polysulfone Polymers from (13)C Solid-State NMR Experiments.

The molecular and segmental motions in three different grades of ductile polysulfone polymers; poly(ether sulfone) (PESU), polysulfone (PSU), and poly(phenyl sulfone) (PPSU) are probed using (13)C solid-state NMR experiments. Polarization inversion spin exchange at magic angle (PISEMA) experiments indicates that the phenyl rings in the polymers are undergoing π-flip motions on the order of 100 kHz. The temperature dependent PISEMA experiments show that the fraction of mobile regions that undergoes aromatic π-flips is higher in PPSU than in the other two polymers. The center band only detection of exchange (CODEX) experiments was carried out and was unable to detect any slow segmental motions in the chains. A combination of (13)C spin-lattice relaxation time (T1) and T1-filtered PISEMA experiments show that the mobile regions in all the polymers are dynamically heterogeneous.

9-fluorenemethanol: an internal electron donor to fine tune olefin polymerization activity.

A new MgCl2 based molecular adduct has been synthesized with 9-fluorenemethanol (9FM) as a novel internal electron donor (IED), along with ethanol (EtOH) (MgCl2·n9FM·xEtOH). The above molecular adduct has been subjected to a variety of structural, spectroscopic and morphological characterization techniques. The results of the solid state (13)C CPMAS NMR technique suggests the coordination of 9FM to MgCl2. Observation of a low angle diffraction peak at 2θ = 5.7° (d = 15.5 Å) underscores the coordination of 9FM along the z-axis, and ethanol in the molecular adduct. Active Ziegler-Natta catalysts were prepared by two different synthesis methods; the conventional method to obtain a high surface area active catalyst, and other one with 9FM as an integral part of the active catalyst in order to study the influence of 9FM as an IED over the active sites. The active catalysts were also characterized thoroughly with different analytical tools. The XRD results show (003) facets of δ-MgCl2 (α-MgCl2) for the conventional (non-conventional) titanated catalyst. Results of the ethylene polymerization activity study reveals that the conventionally prepared highly porous active catalyst shows 1.7-2.5 times higher activity than the non-conventional prepared catalyst; however, the latter shows a low molecular weight distribution and confirms the role of the Lewis base as an IED.

Solid-State NMR investigations of a MgCl2·4(CH3)2CHCH2OH molecular adduct: a peculiar case of reversible equilibrium between two phases.

MgCl2·xROH molecular adducts are extensively employed as a support material for Ziegler-Natta polyolefin catalysis. However, their structural properties are not well understood. Recently, we reported on the preparation of an isobutanol adduct, MgCl2·4(CH3)2CHCH2OH (MgiBuOH) ( Dalton Trans. 2012 , 41 , 11311 ), which is very sensitive to the preparation conditions, such as the temperature and refluxing time. For the present study, the structural properties of MgiBuOH adducts prepared under different conditions have been investigated thoroughly by solid-state NMR and nonambient XRD. Formation of two phases has been confirmed, and in situ variable temperature solid-state NMR measurements confirm the coexistence of two phases as well as the oscillation from one to another phase. It is expected that such molecular adducts could have a significant role in organic transformation reactions due to an oscillating structural component. An understanding of phase oscillation with the Mg(2+) ion as the central metal ion might shed some light toward understanding various biological and structural functions.

Investigations into variations in local cationic environment in layered oxide series InGaO3(ZnO)m (m = 1-4).

Layered oxides of the series InGaO3(ZnO)m (m = 1-4) are interesting due to their structural anisotropy. Here, we report a comprehensive study of their structural details, focusing on the local cationic environment in bulk powder samples by MASNMR and EXAFS, which is hitherto not attempted. It is found that the Ga geometry varies gradually from pure pentacoordinated to a mixture of penta and tetracoordinated with increasing amounts of tetracoordination as we move across the series, contrary to previous reports suggesting exclusively trigonal bipyramidal coordination in all the compounds. A similar observation is also made in the case of Zn and structural evolution involving the dissolution of Ga in a ZnO4 tetrahedral network in a sandwich layer can be discerned, as the insulating ZnO layer size increases.

MgCl2·4((CH3)2CHCH2OH): a new molecular adduct for the preparation of TiCl(x)/MgCl2 catalyst for olefin polymerization.

A new molecular adduct of MgCl(2) with isobutanol, namely MgCl(2)·4((CH(3))(2)CHCH(2)OH) (MgiBOH), has been prepared as a precursor to the supporting material for an olefin polymerization catalyst. The MgiBOH adduct and final titanated Ziegler-Natta catalysts have been thoroughly characterized by powder XRD, thermal analysis, Raman spectroscopy and solid-state NMR for structural and spectroscopy aspects. A peak observed at 712 cm(-1) in the Raman spectra of MgiBOH indicates the characteristic Mg-O(6) breathing mode and the formation of the adduct. The diffraction feature at 2θ = 7.8° (d = 11.223 Å) in the XRD confirms the adduct formation and the layered structure. The aim of the present article is to study how the insertion of a bulky isobutanol moiety affects the structural and electronic properties of the MgCl(2)·isobutanol molecular adduct. Indeed, the focus of the present study is to explore how the presence of isobutanol, in the initial molecular adduct, influences the final Z-N catalyst properties and its activity.

MgCl(2).6PhCH2OH--a new molecular adduct as support material for Ziegler-Natta catalyst: synthesis, characterization and catalytic activity.

Benzyl alcohol has been used to prepare a single phase MgCl(2).6BzOH molecular adduct as a support for an ethylene polymerization catalyst (Ziegler catalyst). The structural, spectroscopic and morphological aspects of the MgCl(2).6BzOH molecular adduct and the Ziegler catalyst have been thoroughly studied by various physicochemical characterization techniques. The presence of MgO(6) octahedrons due to the interaction of Mg(2+) with six -OH groups of the benzyl alcohol is confirmed from a Raman feature at 703 cm(-1), and structural studies. The supported catalyst activity has been evaluated for the ethylene polymerization reaction. The lower polymerization activity of the titanated Ziegler-Natta catalyst compared with a standard catalyst is attributed to the strong interaction of titanium chloride with the support and associated electronic factors.