Rat Microvascular Model is Tolerant to Technical Errors.

BACKGROUND: Extensive studies have been conducted using the rat model to understand the potential technical errors that lead to anastomotic failure. However, current literature indicates that the rat model has excellent tolerance to diverse errors committed by microsurgeons. The error-investigating rat model is often created by one or two experienced surgeons, and only one isolated technical error is examined. These biases may potentially cause limitations of the results from previous studies. Meanwhile, venous anastomoses have rarely been investigated in previous literature. Therefore, it is important to elucidate this topic with a more comprehensive study design. METHODS: Ninety-four arterial and 94 venous anastomoses on Sprague-Dawley rat femoral vessels that were performed by 47 microsurgeons who participated in the microsurgery course at the Columbia University and the University of Thessaloniki were evaluated. In total, 10 technical errors were examined: (1) disruption of suture line, (2) back-wall stitch, (3) oblique stitch, (4) wide bite, (5) partial thickness bite, (6) unequal suture distance, (7) tear in vessel wall, (8) excessively tight suture, (9) suture threads in lumen, and (10) large edge overlap. The frequency of each error committed, and the 30-minute postoperative patency was also recorded. The underlying causal relationship between these errors, potential interaction, and the short-term anastomosis patency was analyzed statistically. RESULTS: Only the back-wall stitch was found to have a significant causal effect on arterial anastomosis failure (p < 0.001). Back-wall stitch, wide bite, and partial thickness bite significantly impact venous anastomosis patency (p < 0.001). No other statistically significant result was found. CONCLUSION: Overall, the rat model is highly resilient to various technical errors despite these mistakes being often considered clinically unacceptable. Therefore, researchers need to consider the resilience of the rat model when designing and analyzing future studies. In addition, microsurgery instructors should focus on individual stitch quality rather than the final patency.

Resorbable Nerve Wraps: Can They Be Overtightened?

BACKGROUND: Nerve wrapping has been advocated to minimize scarring and adhesion following neurorrhaphy or neurolysis. A wrap should provide an enclosure that is snug enough to protect and support the affected nerve without strangulating the nerve. The degree to which resorbable wraps should be ": tightened" around the nerve is largely subjective with scant literature on the subject. The purpose of this study was to evaluate the effects of tightly fitting resorbable nerve wraps around intact rat sciatic nerves. METHODS: Twenty-four Sprague-Dawley rats underwent exposure and circumferential measurement of the right sciatic nerve. Porcine-derived extracellular matrix (ECM) wraps were trimmed and sutured to enclose the nerve with a tight (same as that of the nerve, n = 8) or loose (2.5x that of the nerve, n = 8) circumference. Sham-surgery control animals (n = 8) had no wrap treatment. Functional outcome was recorded biweekly by sciatic functional index (SFI) with walking track analysis and electrical stimulation. Animals were sacrificed at 12 weeks for histologic analyses. RESULTS: No withdrawal response could be evoked in the tight-wrap group until week 9, while significant improvement in SFI first occurred between weeks 5 and 7. By week 12, the tight-wrap group required 60% more current compared with baseline stimulation to produce a withdrawal response. They recovered 81% of SFI baseline values but also demonstrated significantly greater intraneural collagen content (p < 0.001) and lower axon density (p < 0.05) than in the loose-wrap and sham groups. The loose-wrap group had comparable functional and histologic outcomes to the sham control group. CONCLUSION: Resorbable ECM nerve wraps applied tightly around intact rat sciatic nerves caused significant functional impairment and histological changes characteristic of acute nerve compression. Significant but incomplete functional recovery was achieved by the tight-wrap group after 12 weeks, but such recovery may not apply in humans.

Smoothing the steep microsurgery learning curve: considering alternative suture sizes for early-stage microsurgery training with in vivo rat models.

BACKGROUND: Laboratory microsurgery training using invivo rat models is essential for clinical operation. However, challenges existin a structured training course when students transition from a non-livingmodel exercise to a living one. In the present article, we first demonstratethis steep learning curve in early-stage microsurgery training. We then proposethe potential solution of using various sizes of sutures for different trainingpurposes. METHODS: Twoseparate preliminary studies were included. First, we reviewed the records of25 students enrolled in our basic microsurgery training course. Each studentcompleted exercises in a non-living model before graduating to a live animalmodel where their performance on end-to-end arterial and venous anastomoses wasevaluated. Second, we examined the feasibility of different suture sizes in amillimeter microvascular anastomosis. Four groups of identical procedures inrat femoral artery were completed using sutures from 8-0 to 11-0. Patency rateand mean blood flow at 60 min post-op were measured and compared. RESULTS: Thirty-minute patency rates for firstarterial and venous anastomoses were 18/25 and 14/25. Those students who hadnon-patent anastomoses spent significantly longer time than those who hadpatent ones (p<.05). For varioussuture sizes, all groups achieved a 100% patency rate. No significantdifferences were found between the mean blood flow volume at 60 min post-op (p>.05). CONCLUSIONS: Steep learning curve existed in the early-stagemicrosurgery training when transitioning from non-living to living exercisemodels. The feasibility of using various suture sizes in millimeter anastomosismay be a potential solution for instructors to ease this steep learning curve.Level of Evidence: Not gradable.

Superiority of living animal models in microsurgical training: beyond technical expertise.

BACKGROUND: Many studies are investigating the role of living and nonliving models to train microsurgeons. There is controversy around which modalities account for the best microsurgical training. In this study, we aim to provide a systematic literature review of the practical modalities in microsurgery training and compare the living and nonliving models, emphasizing the superiority of the former. We introduce the concept of non-technical skill acquisition in microsurgical training with the use of living laboratory animals in the context of a novel proposed curriculum. METHODS: A literature search was conducted on PubMed/Medline and Scopus within the past 11 years based on a combination of the following keywords: "microsurgery," "training," "skills," and "models." The online screening process was performed by two independent reviewers with the Covidence tool. A total of 101 papers was identified as relevant to our study. The protocol was reported in line with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. RESULTS: Living models offer the chance to develop both technical and non-technical competencies (i.e., leadership, situation awareness, decision-making, communication, and teamwork). Prior experience with ex vivo tissues helps residents consolidate basic skills prior to performing more advanced techniques in the living tissues. Trainees reported a higher satisfaction rate with the living models. CONCLUSIONS: The combination of living and nonliving training microsurgical models leads to superior results; however, the gold standard remains the living model. The validity of the hypothesis that living models enhance non-technical skills remains to be confirmed.Level of evidence: Not ratable.

The Benefits of Expert Instruction in Microsurgery Courses.

BACKGROUND: Microsurgery requires repeated practice and training to achieve proficiency, and there are a variety of curriculums available. This study aims to determine the importance of an expert instructor to guide students through procedures. We compared student proficiency across two microsurgery courses: one with (Columbia University, United States [CU] cohort) and one without a dedicated microsurgery instructor (University of Thessaloniki, Greece [UT] cohort). METHODS: Students were divided into two cohorts of 22 students (UT cohort) and 25 students (CU cohort). Student progress was evaluated by examining patency (lift-up and milking tests), anastomotic timing, and quality (Anastomosis Lapse Index [ALI]) of end-to-end arterial and venous anastomoses on day 1 and again on day 5. Chi-squared tests evaluated patency immediately and 30 minutes postoperation. t-Tests evaluated anastomotic timing and ALI scores. p-Values < 0.05 were considered significant. RESULTS: We evaluated progress within and between each cohort. Within the CU cohort, the quality of the arterial and venous anastomosis improved, respectively (by 54%, p = 0.0059 and by 43%, p = 0.0027), the patency of both the arterial and venous anastomosis improved, respectively (by 44%, p = 0.0002 and by 40%, p = 0.0019), and timing of arterial and venous anastomosis reduced respectively (by 36%, p = 0.0002 and by 33%, p = 0.0010). The UT cohort improved the quality of their arterial anastomoses (by 29%, p = 0.0312). The UT cohort did not demonstrate significant improvement in the other above-mentioned parameters. The CU cohort improved materially over the UT cohort across categories of quality, patency, and timing. CONCLUSION: There are clear benefits of an expert instructor when examining the rate of progress and proficiency level attained at the conclusion of the course. We suggest students who are seeking to maximize proficiency in microsurgical procedures enroll in courses with an expert instructor.

Torsion is Tolerated in Arterial End to Venous Side Anastomoses in the Rat Model.

BACKGROUND: End-to-side (ETS) anastomoses are necessary for many procedures in microvascular surgery, such as free flap transfers. In training courses that use the rat model, the arterial end to venous side (AEVS) anastomosis is a common training exercise for ETS anastomoses. Surgeons-in-training often inadvertently twist the artery when completing the AEVS anastomosis; however, in the clinical setting, torsion is a reported risk factor for ETS anastomosis failure. The purpose of this study was to determine if torsion in an AEVS anastomosis would have a negative effect on patency in the rat model, accurately simulating the clinical scenario. METHODS: All AEVS anastomoses were completed in 15 Sprague-Dawley rats divided into three torsion cohorts: 0, 90, and 180 degrees. Torsion was created in the AEVS anastomosis by mismatching the first two sutures placed between the free femoral artery end and the venotomy. Patency was verified at 0, 2, and 4 hours postoperation via the oxygenated-deoxygenated test and transit-time ultrasound blood flow measurements. RESULTS: All AEVS anastomoses were patent 0, 2, and 4 hours postoperation according to both the oxygenated-deoxygenated test and transit-time ultrasound blood flow measurements. For the average blood flow measurements at 4 hours postoperation, the proximal measurements for 0, 90, and 180 degrees were -34.3, -18.7, and -13.8 mL/min respectively, and the distal measurements were 4.48, 3.46, and 2.90 mL/min, respectively. CONCLUSION: Torsion of 180 degrees does not affect early AEVS anastomosis patency in the rat model. This contrasts with the clinical setting, where torsion is reported to cause ETS anastomosis failure. Since AEVS anastomosis torsion is often difficult to appreciate visually, we suggested that microvascular surgery training instructors include a method to both detect and prevent AEVS anastomosis torsion, such as by marking the free femoral artery end with a marking pen or suture before beginning the anastomosis.

Large and Uneven Bites in End-to-End Anastomosis of the Rat Femoral Artery.

BACKGROUND: Successful microvascular anastomosis depends on sutures that adequately oppose both cut vessel edges. Trainees tend to take oversized or uneven bite. To improve early microsurgical skill acquisition using the rat, this study tests the belief that such bites compromise early patency by applying exaggerated bites to end-to-end arterial anastomoses. METHODS: Twelve Sprague-Dawley rats were randomly assigned to one of the four bite techniques to be applied to both femoral arteries (mean diameter, 0.8 mm). Large (L) and standard (S) bites measured 1.0 and 0.2 mm from the edge, respectively. Eight simple interrupted anastomoses were performed per bite technique, each labeled according to every proximal end bite size, followed by every distal end bite size: LL, LS, SL, and SS. Anastomosis time and blood flow rates were recorded and analyzed statistically. After sacrifice 5 days postoperation, anastomosis sections of each technique were examined histologically. RESULTS: All 24 anastomoses (100%) maintained patency for 5 days. There was no statistical difference between all postoperative blood flow measurements at any given time. Anastomosis times using LL, LS, SL, and SS bite techniques were 41.6, 33.2, 34.8, and 25.5 minutes, respectively. Anastomosis time for the traditional bite technique (SS) was significantly shorter than all other bite techniques (p < 0.05). Histological examination of the harvested segments from each group revealed similar pathophysiological features. CONCLUSION: Oversized bites (1 mm), placed symmetrically and asymmetrically across the anastomosis, do not affect early patency in the rat femoral artery. A reduced reliance on conventional guidelines for suture bites appears acceptable during microarterial anastomoses if the goal is vessel patency. However, we believe clinical competence involves the ability to place small, even bites consistently and uniformly. During microsurgical training, the occasional large bite need not be replaced; however, the trainee should be encouraged to take standard bites.

Creation of a Rat Lower Limb Lymphedema Model.

BACKGROUND: Lymphedema is a frequent complication after surgical treatments of cancer involving lymph node resection. However, research of lymphedema treatments, such as vascularized lymph node transfer, is limited by the absence of an adequate lymphedema animal model. The purpose of this study was to determine if we could create sustainable lower limb lymphedema in the rat with a combination of inguinal lymphadenectomy, circumferential skin and subcutaneous tissue excision, and radiotherapy. METHODS: Inguinal lymphadenectomies were completed in 15 Sprague-Dawley rats. In cohort A, 5 rats received a 0.5- to 1.0-cm wide excision of proximal thigh skin and subcutaneous tissue. This step was omitted for the 10 rats in cohort B. Cohort A then received a single radiation dose of 22.7 Gy, whereas cohort B received a cumulative dose of 40.5 Gy. Bioimpedance measurements were obtained monthly to assess lymphedema progression, and lymphatic drainage at 6 months postradiation was visualized via indocyanine green (ICG) lymphangiography. RESULTS: Two rats in cohort A developed visually appreciable lymphedema in the lower limb, with bioimpedance ratios of 0.684 and 0.542 and ankle circumference ratios of 1.294 and 1.061, respectively, consistent with lymphedema. Furthermore, ICG lymphangiography in these cohort A rats revealed impaired lower limb lymphatic drainage. In cohort B, however, bioimpedance and circumference ratios, and ICG lymphangiography, did not reveal abnormal lymphatic drainage. CONCLUSIONS: The combination of inguinal lymphadenectomy, circumferential skin and subcutaneous tissue excision, and radiotherapy can successfully create lower limb lymphedema in the rat. When soft tissue excision is omitted, lymphedema does not develop.