Comparative analysis of the nutritional, physicochemical, and bioactive characteristics of Artemisia abyssinica and Artemisia arborescens for the evaluation of their potential as ingredients in functional foods.

Artemisia abyssinica and Artemisia arborescens are unique plants that show significant bioactive properties and are used for the treatment of a variety of diseases. This study assessed the nutritional values, functional properties, chemical composition, and bioactive attributes of these plants as functional nutritional supplements. Compared to A. arborescens, A. abyssinica had higher fat (4.76%), fiber (16.07%), total carbohydrates (55.87%), and energy (302.15 kcal/100 g DW), along with superior functional properties, including higher water and oil absorption capacities (638.81% and 425.85%, respectively) and foaming capacity and stability (25.67% and 58.48%). The investigation of volatile compounds found that A. abyssinica had higher amounts of hotrienol (4.53%), yomogi alcohol (3.92%), caryophyllene (3.67%), and carvotanacetone (3.64%), which possess anti-inflammatory, antimicrobial, and antioxidant properties. Artemisia abyssinica contributed over 30% of the recommended dietary intake (RDI) of amino acids. It displayed superior levels of sodium (31.46 mg/100 g DW) and calcium (238.07 mg/100 g DW). It also exhibited higher levels of organic acids, particularly malic acid, butyric acid, and succinic acid, compared to A. arborescens. Fatty acid analysis revealed palmitic and linoleic acids as primary components in both plants, with A. abyssinica having a higher palmitic acid content. Artemisia abyssinica also had higher vitamin C and thiamine levels. Although A. arborescens showed the highest total phenolic content (TPC), antioxidant activity, and capacity, A. abyssinica demonstrated acceptable efficiency in TPC and antioxidant content. These findings highlight the potential of both Artemisia species, particularly A. abyssinica, as valuable sources of nutrients and bioactive compounds for various applications.

Efficient anode material derived from nutshells for bio-energy production in microbial fuel cell.

Biochar is a carbonaceous solid that is prepared through thermo-chemical decomposition of biomass under an inert atmosphere. The present study compares the performance of biochar prepared from Peanut shell, coconut shell and walnut shell in dual chamber microbial fuel cell. The physicochemical and electrochemical analysis of biochar reveals that prepared biochar is macroporous, amorphous, biocompatible, and electrochemically conductive. Polarization studies show that Peanut shell biochar (PSB) exhibited a maximum power density of 165 mW/m2 followed by Coconut shell biochar (CSB) Activated Charcoal (AC) and Walnut shell biochar (WSB). Enhanced power density of PSB was attributed to its surface area and suitable pore size distribution which proved conducive for biofilm formation. Furthermore, the high electrical capacitance of PSB improved the electron transfer between microbes and anode.

Pseudomonas aeruginosa behaviour in polymicrobial communities: The competitive and cooperative interactions conducting to the exacerbation of infections.

Pseudomonas aeruginosa is mostly associated with persistent infections and antibiotic resistance as a result of several factors, biofilms one of them. Microorganisms within the polymicrobial biofilm (PMB) reveal various transcriptional profiles and affect each other which might influence their pathogenicity and antibiotic tolerance and subsequent worsening of the biofilm infection. P. aeruginosa within PMB exhibits various behaviours toward other microorganisms, which may enhance or repress the virulence of these microbes. Microbial neighbours, in turn, may affect P. aeruginosa's virulence either positively or negatively. Such interactions among microorganisms lead to emerging persistent and antibiotic-resistant infections. This review highlights the relationship between P. aeruginosa and its microbial neighbours within the PMB in an attempt to better understand the mechanisms of polymicrobial interaction and the correlation between increased exacerbations of infection and the P. aeruginosa-microbe interaction. Researching in the literature that was carried out in vitro either in co-cultures or in the models to simulate the environment at the site of infection suggested that the interplay between P. aeruginosa and other microorganisms is one main reason for the worsening of the infection and which in turn requires a treatment approach different from that followed with P. aeruginosa mono-infection.

Antibiotics and antibiotic-resistant bacteria in greywater: Challenges of the current treatment situation and predictions of future scenario.

The current work reviews the quantitative microbiological risk assessment of antibiotic-resistant bacteria (ARB) in greywater and discusses the international strategies currently used for reducing antimicrobial resistance. The work highlights the countries that have a plan for the treatment and reuse of greywater and the current guidelines used in these countries. The paper also investigates the role of greywater in the distribution of antimicrobial resistance because of antibiotics and ARB. A bibliometric analysis was conducted for the studies on greywater, pathogenic bacteria, and antibiotics. The studies obtained from Scopus database were screened and compared to obtain the data for global antimicrobial resistance in 2000 and 2021. The strategies used by developed countries that led to the reduction in the recorded antimicrobial resistance are also listed. The challenges and limitations associated with the current plans adopted by several countries to minimise the spreading of the antimicrobial resistance are highlighted, while proposed solutions are provided. Two main issues associated with the distribution of antimicrobial resistance are (1) the absence of a plan in developing counties and presence of antimicrobial agents and ARB in the environment and (2) the difficulties in the current treatment technologies used for the removal of these antimicrobial agents from the water and wastewater. Based on the review and discussion, it was concluded that more advanced technologies are required to ensure total elimination of the antimicrobial agents and ARB from the environment. In addition, a new international standard should be drafted for the ARB in the environment, as they differ from the one currently used for medical applications.

Antibacterial Activity of a Novel Oligosaccharide from Streptomyces californics against Erwinia carotovora subsp. Carotovora.

The present study aims to characterize and predict models for antibacterial activity of a novel oligosaccharide from Streptomyces californics against Erwinia carotovora subsp. carotovora using an adaptive neuro-fuzzy inference system and an artificial neural network. The mathematical predication models were used to determine the optimal conditions to produce oligosaccharide and determine the relationship between the factors (pH, temperature, and time). The characteristics of the purified antibacterial agent were determined using ultraviolet spectroscopy (UV/Vis), infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (1H- and 13C-NMR), and mass spectrometry (MS). The best performances for the model were 39.45 and 35.16 recorded at epoch 1 for E. carotovora Erw5 and E. carotovora EMCC 1687, respectively. The coefficient (R2) of the training was more than 0.90. The highest antimicrobial production was recorded after 9 days at 25 °C and a pH of 6.2, at which more than 17 mm of the inhibition zone was obtained. The mass spectrum of antimicrobial agent (peak at R.T. = 3.433 of fraction 6) recorded two molecular ion peaks at m/z = 703.70 and m/z = 338.30, corresponding to molecular weights of 703.70 and 338.30 g/mol, respectively. The two molecular ion peaks matched well with the molecular formulas C29H53NO18 and C14H26O9, respectively, which were obtained from the elemental analysis result. A novel oligosaccharide from Streptomyces californics with potential activity against E. carotovora EMCC 1687 and E. carotovora Erw5 was successfully isolated, purified, and characterized.

Microbial fuel cell systems; developments, designs, efficiencies, and trends: A comparative study between the conventional and innovative systems.

The microbial fuel cell (MFC) technology has appeared in the late 20th century and received considerable attention over the last decade due to its multiple and unique potential in converting the substrates into electricity and valuable productions. Extensive efforts have been paid to improve the MFCs performance, leading to the publication of a massive amount of research that developed various aspects of these systems. Most of these improvements have focused on optimization parameters, which is currently inappropriate to provide an innovational developing vision for MFC systems. The convergent results in most of the previous conventional studies (12,643 studies according to the WOS database) have reduced the value of MFCs by drawing an incomplete image for the performance of the systems. Therefore, this paper aimed to provide a comprehensive comparison between the highly reliable studies that innovatively developed the MFC systems and the conventional MFCs studies. The current paper discusses the novel MFCs development history, designs, efficiency, and challenges compared to conventional MFCs. The discussion has displayed the high efficiency of the novel MFCs in removing over 90% of substrates and generating power of 800 mW m-2. The paper also analyzed the literature trends, history and suggested recommendations for future studies. This is the first paper highlighting the substantial differences between the innovative and conventional MFC systems, nominating it to be a vital reference for novel MFCs studies in the future.

Optimisation of self-healing of bio-foamed concrete bricks pores using Bacillus tequilensis under different temperature and CO2 curing conditions.

The self-healing of bio-concrete cracks and pores have been utilised worldwide to improve the properties of bio-concrete using different types of bacteria. Meanwhile, no published research was conducted to heal bio-foamed concrete bricks (B-FCB) pores using Bacillus tequilensis. Previous studies focused on the concentration of bacteria and neglect other factors that could affect the healing process. This research aimed to optimise the healing ratio of B-FCB pores using four factors: B. tequilensis concentration, concrete density, temperature and CO2 concentration. Initial water absorption (IWA) and water absorption (WA) were used as responses in statistical methods, namely, factorial and response surface methodology (RSM). B. tequilensis species was isolated from cement kiln dust, produced in a powder form, then subjected to simulate test using a special medium consisting of foamed concrete materials to check the survival ability in B-FCB. SEM, EDX, and XRD were used to investigate the healing process of B-FCB pores. The results revealed that the decrement ratios of IWA and WA of B-FCB were 52.8% and 29.1% compared to FCB, respectively. SEM results reflect the healing that occurred in B-FCB pores, mostly healed via precipitation of CaCO3 as demonstrated on the XRD results.

Climate change, tsunami and biodiversity endangered at the South China Sea, past, current and prediction models for the future: A comprehensive study.

In this study, the climate change, tsunami and biodiversity for 336 km coastline endangered at the South China Sea was investigated with the review for the past, current and prediction models for the future. The hydraulic study of the coastal area was conducted using a well-established 2D numerical model suite Delft3D. The study revealed that the generated earthquakes at the convergence zone in the last century are small (Mw7.3), the possibility that a megathrust earthquake event in the SCS basin occurs in the future. The study area comprises a narrow strip of vegetation notably dominated by Casuarina equisetifolia with other coastal plants. Mangrove forests are found along the coastline and estuaries that are overlaid with marine alluvial soils. The current paper is the first comprehensive study of the South China Sea, and the findings increase the awareness among the public to understand the risk associated with environmental pollution.

Elimination of rhodamine B from textile wastewater using nanoparticle photocatalysts: A review for sustainable approaches.

Rhodamine B (RhB) dye used in the textile industries is associated with carcinogenic and neurotoxic effects with a high potential to cause a variety of human diseases. Semiconductor photocatalysts synthesised through agriculture waste extracts exhibited high efficiency for RhB removal. The current review aimed to explore the efficiency and mechanism of RhB degradation using different photocatalysts that have been used in recent years, as well as the effect of various factors on the removal process. Zinc oxide nanoparticles (ZnO NPs) synthesised from plant extract is the most effective for the RhB degradation with the efficiency reaching 100% after 210 min. The photocatalysis process depends on the pH because pH changes the balance of water dissociation, which impacts the formation of hydroxyl radicals and the surface load of the catalyst. Analysis using Jupyter Notebook revealed a strong correlation between the concentration of ZnO NPs and the photocatalysis efficiency (R = 0.72). These findings reveal that man-sized photocatalysts have a high potential for removing RhB from the wastewater.

Modified TiO2 nanotubes-zeolite composite photocatalyst: Characteristics, microstructure and applicability for degrading triclocarban.

The study explored the characteristics and effectiveness of modified TiO2 nanotubes with zeolite as a composite photocatalyst (MTNZC) for the degradation of triclocarban (TCC) from the aqueous solution. MTNZC samples have been produced via electrochemical anodisation (ECA) followed by electrophoretic deposition (EPD). Three independent factors selected include MTNZC size (0.5-1 cm2), pH (3-10), and irradiation time (10-60 min). The observation revealed that the surface of Ti substrate by the 40 V of anodisation and 3 h of calcination was covered with the array ordered, smooth and optimum elongated nanotubes with average tube length was approximately 5.1 µm. EDS analysis proved the presence of Si, Mg, Al, and Na on MTNZC due to the chemical composition present in the zeolite. The average crystallite size of TiO2 nanotubes increased from 2.07 to 3.95 nm by increasing anodisation voltage (10, 40, and 60 V) followed by 450 °C of calcination for 1, 3, and 6 h, respectively. The optimisation by RSM shows the F-value (36.12), the p-value of all responses were less than 0.0001, and the 95% confidence level of the model by all the responses indicated the model was significant. The R2 in the range of 0.9433-0.9906 showed the suitability of the model to represent the actual relationship among the parameters. The photocatalytic degradation rate of TCC from the first and the fifth cycles were 94.2 and 77.4%, indicating the applicability of MTNZC to be used for several cycles.

Nanoparticles approach to eradicate bacterial biofilm-related infections: A critical review.

Biofilm represents one of the crucial factors for the emergence of multi-drug resistance bacterial infections. The high mortality, morbidity and medical device-related infections are associated with biofilm formation, which requires primarily seek alternative treatment strategies. Recently, nanotechnology has emerged as a promising method for eradicating bacterial biofilm-related infection. The efficacy of nanoparticles (NPs) against bacterial infections interest great attention, and the researches on the subject are rapidly increasing. However, the majority of studies continue to focus on the antimicrobial effects of NPs in vitro, while only a few achieved in vivo and very few registered as clinical trials. The present review aimed to organize the scattered available information regarding NPs approach to eradicate bacterial biofilm-related infections. The current review highlighted the advantages and disadvantages associated with this approach, in addition to the challenges that prevent reaching the clinical applications. It was appeared that the production of NPs either as antimicrobials or as drug carriers requires further investigations to overcome the obstacles associated with their kinetic and biocompatibility.

Sustainable approaches for removing Rhodamine B dye using agricultural waste adsorbents: A review.

Rhodamine B (RhB) is among the toxic dyes due to the carcinogenic, neurotoxic effects and ability to cause several diseases for humans. The adsorption with agricultural waste adsorbent recorded high performance for the RhB removal. The current review aimed to explore the efficiency of different adsorbents which have been used in the few last years for removing RhB dye from wastewater. The data of adsorption of RhB using agricultural wastes were collected from the Scopus database in the period between 2015 and 2021. The use of agricultural wastes and adsorbents as a replacement for the activated has received high attention among researchers. The RhB removal methods by microbial enzymes and biomass occurred between 76 and 90.1%. In comparison, the adsorption with agricultural wastes such as activated carbon white sugar reached 98% within 12 min. The adsorption process has a wide range of pH (3-10) due to the zwitterionic forms of RhB. Gmelina aborea leaf activated carbon is among the agriculture wastes absorbents that exhibited 1000 mg g-1 of the adsorption capacity. It appeared that the agricultural wastes adsorbents have a high potential for removing RhB from the wastewater.

Takakura composting method for food wastes from small and medium industries with indigenous compost.

The current work aimed to study the physical, chemical and biological properties of food wastes generated from small and medium industries by using Takakura composting methods. Composting method was referred as indigenous compost (IC) and commercial compost (CC) reactors. The reactors were operated at 44 °C, pH (6 to 8.5) and 40 to 55 % of moisture for 22 weeks in closed environment using a carpet around the basket to avoid external disturbance. The results revealed that the total Kjeldahl nitrogen (TKN), total phosphorus (TP) and potassium (K) in the IC reactors were 6300, 10.57 and 726.07 ppm, respectively, while 8400, 15.45 and 727.81 ppm, respectively, in the CC reactors. Moreover, both IC and CC has Cd2+, Cr2+, Cu2+, Pb2+, Ni2+ and Zn2+ concentrations within the compost legislation standard (CLS). The findings of this study indicated that the composting method could be used as an alternative food waste management in small and medium industry and the Takakura composting method is suitable for food waste composting.

Supercritical fluid extraction of four aromatic herbs and assessment of the volatile compositions, bioactive compounds, antibacterial, and anti-biofilm activity.

Artemisia arborescens, Artemisia abyssinica, Pulicaria jaubertii, and Pulicaria petiolaris are fragrant herbs traditionally used in medication and as a food seasoning. To date, there are no studies on the use of supercritical fluids extraction with carbon dioxide (SFE-CO2) on these plants. This study evaluates and compares total phenolic content (TPC), antioxidant activity by DPPH• and ABTS•+, antibacterial, and anti-biofilm activities of SFE-CO2 extracts. Extraction was done by SFE-CO2 with 10% ethanol as a co-solvent. A. abyssinica extract had the highest extraction yield (8.9% ± 0.41). The GC/MS analysis of volatile compounds identified 307, 265, 213, and 201compounds in A. abyssinica, A. arborescens, P. jaubertii, and P. petiolaris, respectively. The P. jaubertii extract had the highest TPC (662.46 ± 50.93 mg gallic acid equivalent/g dry extract), antioxidant activity (58.98% ± 0.20), and antioxidant capacity (71.78 ± 1.84 mg Trolox equivalent/g dry extract). The A. abyssinica and P. jaubertii extracts had significantly higher antimicrobial activity and were more effective against Gram-positive bacteria. B. subtilis was the most sensitive bacterium. P. aeruginosa was the most resistant bacterium. P. jaubertii extract had the optimum MIC and MBC (0.4 mg/ml) against B. subtilis. All SFE-CO2 extracts were effective as an anti-biofilm formation for all tested bacteria at 1/2 MIC. Meanwhile, P. jaubertii and P. petiolaris extracts were effective anti-biofilm for most tested bacteria at 1/16 MIC. Overall, the results indicated that the SFE-CO2 extracts of these plants are good sources of TPC, antioxidants, and antibacterial, and they have promising applications in the industrial fields.

Biosorption potential of lead tolerant fungi isolated from refuse dumpsite soil in Nigeria

Metals are non-biodegradable and recurrent in the environs. Heavy metals tolerant fungiwere isolated from refuse dumpsite soil using pour plate method. These fungiwere identified as Aspergillus niger, Penicillium chrysogenumandRhizomucor sp. The fungal isolates were screened for cadmium (Cd), lead (Pb) and zinc (Zn) with concentration of 200ppm, 400ppm and 600ppm. Aspergillus nigerand Penicillium chrysogenumshowed high tolerance for the metals in contrast to the control. The fungiwith high tolerance were used for biosorption study. However, Penicillium chrysogenumshowed higher lead removal or biosorption potential of 1.07ppm, 3.35ppm and 4.19ppm as compared with Aspergillus nigerwith lead removal of 0.67ppm, 3.11ppm and 3.79ppm at 5th, 10thand 15thday respectively. One-way Analysis of Variance was used to interpret the data generated from the biosorption study which revealed that there was no significant different (p>0.05)between the lead removal of Aspergillus nigerandPenicillium chrysogenumon the 5thday but there was significant difference (p<0.05)in the lead removal of Aspergillus nigerand Penicillium chrysogenumon the 10thand 15thday. This study suggests the use of these fungal isolates for removal and biotreatment of heavy metal contaminated and polluted environment.

Microbiota of Palm Oil Mill Wastewater in Malaysia.

This study was aimed at identifying indigenous microorganisms from palm oil mill effluent (POME) and to ascertain the microbial load. Isolation and identification of indigenous microorganisms was subjected to standard microbiological methods and sequencing of the 16S rRNA and 18S rRNA genes. Sequencing of the 16S rRNA and 18S rRNA genes for the microbial strains signifies that they were known as Micrococcus luteus 101PB, Stenotrophomonas maltophilia 102PB, Bacillus cereus 103PB, Providencia vermicola 104PB, Klebsiella pneumoniae 105PB, Bacillus subtilis 106PB, Aspergillus fumigatus 107PF, Aspergillus nomius 108PF, Aspergillus niger 109PF and Meyerozyma guilliermondii 110PF. Results revealed that the population of total heterotrophic bacteria (THB) ranged from 9.5 × 105 - 7.9 × 106 cfu/mL. The total heterotrophic fungi (THF) ranged from 2.1 × 104 - 6.4 × 104 cfu/mL. Total viable heterotrophic indigenous microbial population on CMC agar ranged from 8.2 × 105 - 9.1 × 106 cfu/mL and 1.4 × 103 - 3.4 × 103 cfu/mL for bacteria and fungi respectively. The microbial population of oil degrading bacteria (ODB) ranged from 6.4 × 105 - 4.8 × 106 cfu/mL and the oil degrading fungi (ODF) ranged from 2.8 × 103 - 4.7 × 104 cfu/mL. The findings revealed that microorganisms flourish well in POME. Therefore, this denotes that isolating native microorganisms from POME is imperative for effectual bioremediation, biotreatment and biodegradation of industrial wastewaters.