Expired Antifungal Drugs as Effective Corrosion Inhibitors for Carbon Steel in 1 M HCl Solution: Practical and Theoretical Approaches.

The anticorrosion potency of two expired antifungal drugs, namely, bifonazole (BIF) and terconazole (TER), for X65 carbon steel (X65CS) in a 1.0 M HCl solution was estimated using practical and computational measurements. The results of all methods applied showed that the percentage of anticorrosive efficacy (% AE) increased for expired BIF and TER and reduced at elevated temperatures. The % AE values of expired BIF and TER (375 mg L-1) reached 92.08 and 94.19%, respectively, using polarization methods. The anticorrosion activities of the two expired drugs were interpreted based on their adsorption on the X65CS surface. The adsorption occurred according to the Langmuir isotherm model. The polarization results indicated that the expired drugs BIF and TER were mixed inhibitors. The impedance results showed a single capacitive loop, confirming that the charge transfer process controlled the corrosion of X65CS. Expired BIF and TER served as good pitting inhibitors by shifting the pitting potential to positive values. The thermodynamic functions of activation and adsorption were defined and explained. Density functional theory and Monte Carlo simulations were used to investigate the BIF and TER inhibitors. The theoretical parameters were consistent with the experimental results. The anticorrosion efficiencies determined using the various methods were in complete agreement.

Investigation of the anticorrosion and adsorption properties of two polymer compounds on the corrosion of SABIC iron in 1 M HCl solution by practical and computational approaches.

The anticorrosion efficiency of two polymer compounds, namely polystyrene (PS), polybutylene terephthalate (PBT), against the corrosion of SABIC iron (S-Fe) in 1.0 M HCl solution was investigated. The anticorrosion efficiency was estimated by chemical and electrochemical measurements. The anticorrosion efficiency increased with the increase in the concentration of the polymer compounds and reduction in temperature. All the obtained corrosion data confirmed the anticorrosion strength in the presence of PS and PBT compounds, such as the decreasing values of the corrosion current density, capacity of the double layer, and weight reduction, while the values of the charge-transfer resistance increased. Also, the pitting potential values moved in the noble (+) direction. The anticorrosion efficiency of the PBT compound was higher than that of the PS compound, which was 95.98% at 500 ppm concentration for PBT while for PS it was 93.34% according to polarization measurements. The anticorrosion activity occurred by the adsorption of PS and PBT compounds on the surface of S-Fe according to the Langmuir isotherm. The polarization curves indicated that the PS and PBT compounds were mixed-type inhibitors. Density functional theory (DFT) and Monte Carlo simulation (MC) were performed for the two polymer compounds. The computational quantum functions were found to be in agreement with the experimental results.

Natural parsley oil as a green and safe inhibitor for corrosion of X80 carbon steel in 0.5 M H2SO4 solution: a chemical, electrochemical, DFT and MC simulation approach.

This work focuses on the use of natural parsley oil as a safe, eco-friendly and cost-effective inhibitor for dissolution of X80 carbon steel (X80CS) in 0.5 M H2SO4 solution. Electrochemical and chemical measurements and theoretical studies were utilized to determine the inhibitory vigor of parsley oil. The inhibition efficacy increases with an increase in the parsley oil concentration and a decrease in temperature. It reached 95.68% at 450 ppm of parsley oil. The inhibition process is explained by spontaneous adsorption of the oil on the X80CS. Adsorption is described by the Langmuir isotherm model. The polarization data demonstrate that parsley oil is categorized as a mixed inhibitor with a dominant control of the cathodic reaction. Parsley oil inhibits the pitting corrosion of X80CS in the presence of NaCl solution by moving the pitting potential to a more positive mode indicating protection against pitting attack. The thermodynamic parameters for activation and adsorption were computed and interpreted. The four chemical components in natural parsley oil were examined using density functional theory (DFT). Monte Carlo (MC) simulation was performed to study the adsorption of parsley oil on the X80CS surface. The outcomes confirmed that the Apiole molecule is the most effective in the inhibition process.

Enhancing the inhibition and adsorption performance of SABIC iron corrosion in sulfuric acid by expired vitamins. Experimental and computational approach.

The inhibition potency of expired thiamine or vitamin B1 (VB1) and riboflavin or vitamin B2 (VB2) against SABIC iron corrosion in 0.5 M H2SO4 solutions was investigated using chemical and electrochemical techniques. Theoretical studies such as DFT and MC simulations were performed on both VB1 and VB2 inhibitors to obtain information related to the experimental results. It has been found that the inhibition efficacy assigned from all measurements used increases with increasing concentration of the two expired vitamins and reduces at elevated temperatures. It reached 91.14% and 92.40% at 250 ppm of VB1 and VB2, respectively. The inhibition was explicated by the adsorption of the complex formed between expired vitamins and ferrous ions on the SABIC iron surface. The adsorption was found to obey the Langmuir isotherm model. Galvanostatic polarization demonstrated that the two expired vitamins act as an inhibitor of the mixed type. These expired vitamins have proven effective in inhibiting the pitting corrosion induced by the presence of Cl- ions. The pitting potential is transferred to the positive values showing resistance to pitting damage. The theoretical parameter values are consistent with experimental results.

Postsynthetic Incorporation of a Singlet Oxygen Photosensitizer in a Metal-Organic Framework for Fast and Selective Oxidative Detoxification of Sulfur Mustard.

A fullerene-based photosensitizer is incorporated postsynthetically into a Zr6 -based MOF, NU-1000, for enhanced singlet oxygen production. The structural organic linkers in the MOF platform also act as photosensitizers which contribute to the overall generation of singlet oxygen from the material under UV irradiation. The singlet oxygen generated by the MOF/fullerene material is shown to oxidize sulfur mustard selectively to the less toxic bis(2-chloroethyl)sulfoxide with a half-life of only 11 min.

Efficient extraction of sulfate from water using a Zr-metal-organic framework.

A Zr-based MOF, NU-1000, comprised of Zr6 nodes and tetratopic pyrene-containing linkers is studied for adsorption and extraction of SO4(2-) from water. The adsorption capacity and uptake time of SO4(2-) in NU-1000 is determined at varying concentrations to give an overall maximum adsorption capacity of 56 mg SO4(2-) per g of MOF. Selective adsorption of SO4(2-) by NU-1000 in the presence of other anions as well as regeneration of the sorbent is also explored.

Selective Solvent-Assisted Linker Exchange (SALE) in a Series of Zeolitic Imidazolate Frameworks.

Solvent-assisted linker exchange (SALE) has recently emerged as an attractive strategy for the synthesis of metal-organic frameworks (MOFs) that are unobtainable via traditional synthetic pathways. Herein we present the first example of selective SALE in which only the benzimiadazolate-containing linkers in a series of mixed-linker zeolitic imidazolate frameworks (ZIF-69, -78, and -76) are replaced. The resultant materials (SALEM-10, SALEM-10b, and SALEM-11, respectively) are isostructural to the parent framework and in each case contain trifluoromethyl moieties. We therefore evaluated each of these materials for their hydrophobicity in condensed and gas phases. We expect that selective SALE will significantly facilitate the design of improved, and potentially complex, MOF materials with new and unusual properties.

Synthesis of nanocrystals of Zr-based metal-organic frameworks with csq-net: significant enhancement in the degradation of a nerve agent simulant.

The synthesis of nano-sized particles of NU-1000 (length from 75 nm to 1200 nm) and PCN-222/MOF-545 (length from 350 nm to 900 nm) is reported. The catalytic hydrolysis of methyl paraoxon was investigated as a function of NU-1000 crystallite size and a significant enhancement in the rate was observed for the nano-sized crystals compared to microcrystals.

Functionalized defects through solvent-assisted linker exchange: synthesis, characterization, and partial postsynthesis elaboration of a metal-organic framework containing free carboxylic acid moieties.

Intentional incorporation of defect sites functionalized with free carboxylic acid groups was achieved in a paddlewheel-based metal-organic framework (MOF) of rht topology, NU-125. Solvent-assisted linker exchange (SALE) performed on a mixed-linker derivative of NU-125 containing isophthalate (IPA) linkers (NU-125-IPA) led to the selective replacement of the IPA linkers in the framework with a conjugate base of trimesic acid (H3BTC). Only two of the three carboxylic acid moieties offered by H3BTC coordinate to the Cu2 centers in the MOF, yielding a rare example of a MOF decorated with free -COOH groups. The presence of the -COOH groups was confirmed by diffuse reflectance infrared Fourier-transformed spectroscopy (DRIFTS); moreover, these groups were found to be available for postsynthesis elaboration (selective monoester formation). This work constitutes an example of the use of SALE to obtain otherwise challenging-to-synthesize MOFs. The resulting MOF, in turn, can serve as a platform for accomplishing selective organic transformations, in this case, exclusive monoesterification of trimesic acid.

Post-assembly transformations of porphyrin-containing metal-organic framework (MOF) films fabricated via automated layer-by-layer coordination.

Herein, we demonstrate the robustness of layer-by-layer (LbL)-assembled, pillared-paddlewheel-type MOF films toward conversion to new or modified MOFs via solvent-assisted linker exchange (SALE) and post-assembly linker metalation. Further, we show that LbL synthesis can afford MOFs that have proven inaccessible through other de novo strategies.

Water-stable zirconium-based metal-organic framework material with high-surface area and gas-storage capacities.

We designed, synthesized, and characterized a new Zr-based metal-organic framework material, NU-1100, with a pore volume of 1.53 ccg(-1) and Brunauer-Emmett-Teller (BET) surface area of 4020 m(2) g(-1) ; to our knowledge, currently the highest published for Zr-based MOFs. CH4 /CO2 /H2 adsorption isotherms were obtained over a broad range of pressures and temperatures and are in excellent agreement with the computational predictions. The total hydrogen adsorption at 65 bar and 77 K is 0.092 g g(-1) , which corresponds to 43 g L(-1) . The volumetric and gravimetric methane-storage capacities at 65 bar and 298 K are approximately 180 vSTP /v and 0.27 g g(-1) , respectively.

Crystal structure and vibrational spectral studies of a new organic-inorganic crystal: 4-Benzylpiperidinium trioxonitrate.

Single crystals of a new organic-inorganic crystal, 4-benzylpiperidinium trioxonitrate (4-BPPN) were grown by slow evaporation at room temperature and were characterized by X-ray diffraction, DTA-TG measurement, FT-IR and FT-Raman spectroscopies. The title compound crystallizes in the monoclinic system P21/c at room temperature with the following parameters: a=12.787(8)Å, b=9.007(5)Å, c=11.120(5)Å, ß=95.974(2)° and Z=4. Its crystal structure is packing of alternated inorganic and organic layers parallel to (a, c) planes. The different components are connected by a bi-dimensional network of N-H⋯O hydrogen bonds. The ability of ions to form spontaneous three-dimensional structure through N-H⋯O hydrogen bond is fully utilized. These hydrogen bonds give notable vibrational effects. The optimized molecular structure and the vibrational spectra were calculated by the Density Functional Theory (DFT) method using the B3LYP function with the 6-31G(d) basis set. All observed vibrational bands have been discussed and assigned to normal mode or to combinations on the basis of our DFT calculations as a primary source of attribution and also by comparison with the previous results for similar compounds. Good consistency is found between the calculated results and the experimental structure, IR, and Raman spectra.

Tracing hydrogen bonding Au···H-C at gold atoms: a case study.

It has been shown in preceding experimental work that cyclometalated 6-benzylpyridines with gold(III) centers in the metallacycle (1) adopt a boat conformation reminiscent of the structure of 9,10-dihydroanthracene. There is a conspicuously short Au···H-C contact with a pseudoaxial methyl group suggesting a significant interaction which may be the prototype for Au(III)···H-C hydrogen bonding. Quantum chemical calculations on the B3LYP/def2-TZVP level have now shown that the ground state structures and conformations adopted by the homologues with two hydrogen atoms, two methyl groups, and a hydrogen atom and a methyl group at the carbon atom bridging the two (hetero)arene rings can be explained on the basis of simple conformation rules. There is no evidence that the Au(III)···H-C contact leads to an attractive interaction. The results are discussed in the context of literature data for Pt(II) analogues. Examples for potential Au(III)···H-X interactions presented in other references appear to be of a similar character.

Dicarbonyl-dichlorido(N,N,N',N'-tetra-methyl-ethylenediamine)-ruthenium(II).

In the title compound, [RuCl(2)(C(6)H(16)N(2))(CO)(2)], the geometry around the Ru(II) atom is a distorted RuC(2)N(2)Cl(2) octa-hedron, with pairs of C and Cl atoms trans to each other and the N atoms of the bidentate ligand in a cis conformation. The five-membered chelate ring is puckered on the C-C bond.