Spray-Dried Nanolipid Powders for Pulmonary Drug Delivery: A Comprehensive Mini Review.

Lung diseases have received great attention in the past years because they contribute approximately one-third of the total global mortality. Pulmonary drug delivery is regarded as one of the most appealing routes to treat lung diseases. It addresses numerous drawbacks linked to traditional dosage forms. It presents notable features, such as, for example, a non-invasive route, localized lung drug delivery, low enzymatic activity, low drug degradation, higher patient compliance, and avoiding first-pass metabolism. Therefore, the pulmonary route is commonly explored for delivering drugs both locally and systemically. Inhalable nanocarrier powders, especially, lipid nanoparticle formulations, including solid-lipid and nanostructured-lipid nanocarriers, are attracting considerable interest in addressing respiratory diseases thanks to their significant advantages, including deep lung deposition, biocompatibility, biodegradability, mucoadhesion, and controlled drug released. Spray drying is a scalable, fast, and commercially viable technique to produce nanolipid powders. This review highlights the ideal criteria for inhalable spray-dried SLN and NLC powders for the pulmonary administration route. Additionally, the most promising inhalation devices, known as dry powder inhalers (DPIs) for the pulmonary delivery of nanolipid powder-based medications, and pulmonary applications of SLN and NLC powders for treating chronic lung conditions, are considered.

Preparation and formulation of progesterone para-aminobenzoic acid co-crystals with improved dissolution and stability.

The crystal structure of a new Progesterone (PROG) co-crystal with para-aminobenzoic acid (PABA) showing enhanced solution properties is reported. PROG-PABA co-crystal was first identified though an in silico coformer screening process using the CSD Co-crystal deign function, then confirmed through a solution evaporation crystallisation experiment. The resulting co-crystal was characterized using single crystal X-ray diffraction, differential scanning calorimetry and Fourier-transform infrared spectroscopy. Liquid assisted grinding was selected as a suitable scale up method compared to spray drying and antisolvent methods due to minimal starting material phases in the final product. Following scale up, aqueous solubility, stability and dissolution measurements were carried out. PROG-PABA showed increased distinct aqueous solubility and dissolution compared to PROG starting material and was shown to be stable at 75 % relative humidity for 3 months. Tablets containing co-crystal were produced then compared to the Utrogestan® soft gel capsule formulation through a dissolution experiment. PROG-PABA tablets showed a substantial increase in dissolution over the course of the experiment with over 30× the amount of PROG dissolved at the 3-hour time point. This co-crystal shows positive implications for developing an improved oral PROG formulation.

A Comprehensive Study on Nanoparticle Drug Delivery to the Brain: Application of Machine Learning Techniques.

The delivery of drugs to specific target tissues and cells in the brain poses a significant challenge in brain therapeutics, primarily due to limited understanding of how nanoparticle (NP) properties influence drug biodistribution and off-target organ accumulation. This study addresses the limitations of previous research by using various predictive models based on collection of large data sets of 403 data points incorporating both numerical and categorical features. Machine learning techniques and comprehensive literature data analysis were used to develop models for predicting NP delivery to the brain. Furthermore, the physicochemical properties of loaded drugs and NPs were analyzed through a systematic analysis of pharmacodynamic parameters such as plasma area under the curve. The analysis employed various linear models, with a particular emphasis on linear mixed-effect models (LMEMs) that demonstrated exceptional accuracy. The model was validated via the preparation and administration of two distinct NP formulations via the intranasal and intravenous routes. Among the various modeling approaches, LMEMs exhibited superior performance in capturing underlying patterns. Factors such as the release rate and molecular weight had a negative impact on brain targeting. The model also suggests a slightly positive impact on brain targeting when the drug is a P-glycoprotein substrate.

Inhaled Medicines for Targeting Non-Small Cell Lung Cancer.

Throughout the years, considerable progress has been made in methods for delivering drugs directly to the lungs, which offers enhanced precision in targeting specific lung regions. Currently, for treatment of lung cancer, the prevalent routes for drug administration are oral and parenteral. These methods, while effective, often come with side effects including hair loss, nausea, vomiting, susceptibility to infections, and bleeding. Direct drug delivery to the lungs presents a range of advantages. Notably, it can significantly reduce or even eliminate these side effects and provide more accurate targeting of malignancies. This approach is especially beneficial for treating conditions like lung cancer and various respiratory diseases. However, the journey towards perfecting inhaled drug delivery systems has not been without its challenges, primarily due to the complex structure and functions of the respiratory tract. This comprehensive review will investigate delivery strategies that target lung cancer, specifically focusing on non-small-cell lung cancer (NSCLC)-a predominant variant of lung cancer. Within the scope of this review, active and passive targeting techniques are covered which highlight the roles of advanced tools like nanoparticles and lipid carriers. Furthermore, this review will shed light on the potential synergies of combining inhalation therapy with other treatment approaches, such as chemotherapy and immunotherapy. The goal is to determine how these combinations might amplify therapeutic results, optimizing patient outcomes and overall well-being.

Non-salt based co-amorphous formulation produced by freeze-drying.

Amino acids-based co-amorphous system (CAM) has shown to be a promising approach to overcome the dissolution challenge of biopharmaceutics classification system class II drugs. To date, most CAM formulations are based on salt formation at a 1:1 M ratio and are prepared by mechanical activation. However, its use in medicinal products is still limited due to the lack of in-depth understanding of non-ionic based molecular interactions. There are also limited studies on the effect of drug-to-co-former ratio, the development of more scalable, less aggressive, manufacturing processes such as freeze drying and its dissolution benefits. This work aims to investigate the effect of the ratio of tryptophan (a model non-ionic amino acid) to indomethacin (a model drug) on a non-salt-based CAM prepared via freeze-drying with the tert-butyl alcohol-water cosolvent system. The CAM material was systemically characterized at various stages of the freeze-drying process using DSC, UV-Vis, FT-IR, NMR, TGA and XRPD. Dissolution performance and physical stability upon storage were also investigated. Freeze-drying using the cosolvent system has been successfully shown to produce CAMs. The molecular interactions involving H-bonding, H/π and π-π between compounds have been confirmed by FT-IR and NMR. The drug release rate for formulations with a 1.5:1 drug: amino acid molar ratio (or 1:0.42 wt ratio) or below is found to be significantly improved compared to the pure crystalline drug. Furthermore, formulation with a 2.3:1 drug:amino acid molar ratio (or 1:0.25 wt ratio) or below have shown to be physically stable for at least 9 months when stored at dry condition (5% relative humidity, 25 °C) compared to the pure amorphous indomethacin. We have demonstrated the potential of freeze-drying using tert-butyl alcohol-water cosolvent system to produce an optimal non-salt-based class II drug-amino acid CAM.

Spray dried progesterone formulations for carrier free dry powder inhalation.

Low oral absorption and extensive first pass metabolism of progesterone is reported for many oral formulations which warrants investigation into other routes of administration. It is the aim of this study to investigate the generation of inhaled formulations of progesterone though a spray drying approach with a focus on how spray drying impacts the physicochemical properties of progesterone. Formulations of progesterone with L-leucine and hydroxypropyl methylcellulose acetate succinate (HPMCAS) are reported to this aim. X-ray diffraction, spectroscopy and thermal analysis were used to characterise these formulations and confirmed that progesterone crystallises as the Form II polymorph during spray drying regardless of the solvent used. The resultant formulations showed higher aqueous solubility than progesterone Form I starting material and the addition of HPMCAS was shown to temporarily enable a supersaturated state. Thermal analysis was used to show that the Form II polymorph was sensitive to transformation to Form I during heating. The addition of L-leucine to the formulations reduced the temperature for the polymorphic transformation by âˆ¼ 10 °C. However, when HPMCAS was added to the formulation, the Form II polymorph was prevented from transforming to the Form I polymorph. Cascade impaction was used to determine the aerosol performance of the spray dried powders and showed promising lung deposition profiles (mass median aerodynamic diameter 5 µm) with significant variation depending on the organic solvent used and the ratio of organic to aqueous phase in the feedstock. However, further optimisation of formulations was required to direct more progesterone into the alveolar regions. The addition of HPMCAS was seen to increase the alveolar deposition and therefore formed a formulation with a lower fine particle fraction and mass median aerodynamic diameter. The most suitable formulation for inhalation was formed from a 50:50 acetone:water mixture and showed an ED, FPF and FPD of 81.7%, 44.5% and 7.3 mg respectively. Therefore, HPMCAS is suggested as a suitable excipient to increase solubility, prevent polymorphic transformation and improve inhalation properties of spray dried progesterone formulations. This study highlights the use of spray drying to form inhalable progesterone powders with higher solubility which may broaden the application of this medicine.

Synthesis and in vivo evaluation of three fluid spray dried hybrid ciprofloxacin microparticles in Sprague Dawley rats.

The aim of this study is to prepare and characterise mucoadhesive silica-coated silver nanoparticles loaded with ciprofloxacin (S-AgNPs-CSCFX), and investigate serum biochemical, haematological, and histopathological effects in Sprague Dawley rats upon oral administration. S-AgNPs-CSCFX microparticles were prepared using three fluid nozzle spray drying and characterised by scanning electron microscopy (SEM), X-ray dispersive spectrometry (EDX), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), zeta potential and particles size measurements and X-ray powder diffraction (XRPD). Adult male Sprague Dawley rats were randomly divided between six-treated groups, including blank S-AgNPs and S-AgNPs-CSCFX (LD: Low dose; MD: Median Dose; HD: High Dose) and control group. Each group was treated daily to evaluate the effect of the prepared particles on the lipid profile, serum biochemical, hormonal level, haemogram, and vital organ histopathology. The results showed successful encapsulation of silver nanoparticles which resulted in spherical-shaped S-AgNPs-CSCFX with an average size of 1-5 µm and surface charge of 25.2 ± 5.52 mv. The in-vivo results showed that different doses of blank S-AgNPs and S-AgNPs-CSCFX had no significant toxic effects on the physiological, biochemical, and haematological parameters. There were no marked histopathological alterations in the vital organs of the treated rats with blank and loaded particles.

Preparation and Physiochemical Analysis of Novel Ciprofloxacin / Dicarboxylic Acid Salts.

The crystal structures of four novel dicarboxylic acid salts of ciprofloxacin (CFX) with modified physicochemical properties, prepared by mechanochemical synthesis and solvent crystallization, are reported. A series of dicarboxylic acids of increasing molecular weight was chosen, predicted to interact via a carboxylic acid:secondary amine synthon. These were succinic (SA), glutaric (GA), adipic (AA) and pimelic (PA) acids (4, 5, 6, 7 carbon atoms respectively). Characterized by single crystal and powder X-ray diffraction, Fourier-Transform Infrared Spectroscopy, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy and aqueous solubility measurements, these salts showed distinct physicochemical properties relative to ciprofloxacin base. Searches of the Cambridge Structural Database (CSD) confirmed CFX-SA, CFX-GA, CFX-AA and CFX-PA to be novel crystal structures. Furthermore, the GA salt has substantially higher solubility than the widely available hydrochloride monohydrate salt (CFX-HCl·H2O). CFX-SA, CFX-GA and CFX-AA showed minimum inhibitory concentration (MIC) of 0.008 g/L and CFX-PA showed MIC of 0.004 g/L. The prepared CFX salts retained antibacterial activity exhibiting equivalent antimicrobial activity to CFX-HCl·H2O. These salts have positive implications for increasing the application of CFX beyond conventional oral formulations and highlight mechanochemical activation as suitable production method.

Antifungal nanosuspensions with surfactants and silver for the treatment of onychomycosis.

Fungal nail infection (Onychomycosis) often requires prolonged treatment and is associated with a high risk of resistance to treatment. Here in this contribution, we introduce a novel approach to enhance penetration and antifungal activity of the antifungal drug griseofulvin (GF). Solid dispersions were prepared with hydroxypropyl methylcellulose acetate succinate (HPMCAS) and combined with surfactant (either sodium dodecyl sulphate (SDS), dodecyl trimethylammonium bromide (DTAB), or Pluronic F127) using mechanochemical activation. The prepared powders were then suspended with spray-dried silica-coated silver nanoparticles and applied onto infected bovine hooves to assess permeability and antifungal activity. The results showed that the prepared nanosuspensions significantly suppressed fungal activity causing disruption of fungal biofilms. Raman mapping showed enhanced permeation while dynamic vapor sorption (DVS), and particle size measurements showed varied effects depending on the type of surfactant and milling conditions. The prepared nanosuspensions displayed enhanced solubility of the poorly soluble drug reaching approximately 1.2 mg/mL. The results showed that the dispersions that contained DTAB displayed maximum efficacy while the inclusion of colloidal silver did not seem to significantly improve the antifungal activity compared to other formulations.

Pulmonary Drug Delivery of Antimicrobials and Anticancer Drugs Using Solid Dispersions.

It is well established that currently available inhaled drug formulations are associated with extremely low lung deposition. Currently available technologies alleviate this low deposition problem via mixing the drug with inert larger particles, such as lactose monohydrate. Those inert particles are retained in the inhalation device or impacted in the throat and swallowed, allowing the smaller drug particles to continue their journey towards the lungs. While this seems like a practical approach, in some formulations, the ratio between the carrier to drug particles can be as much as 30 to 1. This limitation becomes more critical when treating lung conditions that inherently require large doses of the drug, such as antibiotics and antivirals that treat lung infections and anticancer drugs. The focus of this review article is to review the recent advancements in carrier free technologies that are based on coamorphous solid dispersions and cocrystals that can improve flow properties, and help with delivering larger doses of the drug to the lungs.

Excessive Iron Induces Oxidative Stress Promoting Cellular Perturbations and Insulin Secretory Dysfunction in MIN6 Beta Cells.

Exposure to high levels of glucose and iron are co-related to reactive oxygen species (ROS) generation and dysregulation of insulin synthesis and secretion, although the precise mechanisms are not well clarified. The focus of this study was to examine the consequences of exposure to high iron levels on MIN6 ß-cells. MIN6 pseudoislets were exposed to 20 µM (control) or 100 µM (high) iron at predefined glucose levels (5.5 mM and 11 mM) at various time points (3, 24, 48, and 72 h). Total iron content was estimated by a colourimetric FerroZine™ assay in presence or absence of transferrin-bound iron. Cell viability was assessed by a resazurin dye-based assay, and ROS-mediated cellular oxidative stress was assessed by estimating malondialdehyde levels. ß-cell iron absorption was determined by a ferritin immunoassay. Cellular insulin release and content was measured by an insulin immunoassay. Expression of SNAP-25, a key protein in the core SNARE complex that modulates vesicle exocytosis, was measured by immunoblotting. Our results demonstrate that exposure to high iron levels resulted in a 15-fold (48 h) and 4-fold (72 h) increase in cellular iron accumulation. These observations were consistent with data from oxidative stress analysis which demonstrated 2.7-fold higher levels of lipid peroxidation. Furthermore, exposure to supraphysiological (11 mM) levels of glucose and high iron (100 µM) at 72 h exerted the most detrimental effect on the MIN6 ß-cell viability. The effect of high iron exposure on total cellular iron content was identical in the presence or absence of transferrin. High iron exposure (100 µM) resulted in a decrease of MIN6 insulin secretion (64% reduction) as well as cellular insulin content (10% reduction). Finally, a significant reduction in MIN6 ß-cell SNAP-25 protein expression was evident at 48 h upon exposure to 100 µM iron. Our data suggest that exposure to high iron and glucose concentrations results in cellular oxidative damage and may initiate insulin secretory dysfunction in pancreatic ß-cells by modulation of the exocytotic machinery.

Generation of High Dose Inhalable Effervescent Dispersions against Pseudomonas aeruginosa Biofilms.

PURPOSE: Novel particle engineering approach was used in this study to generate high dose inhalable effervescent particles with synergistic effects against Pseudomonas aeruginosa biofilms. METHODS: Spray dried co-amorphous salt of ciprofloxacin (CFX) and tartaric acid (TA) was prepared and coated with external layer of sodium bicarbonate and silica coated silver nanobeads. Design of experiments (DOE) was used to optimize physicochemical properties of particles for enhanced lung deposition. RESULTS: Generated particles were co-amorphous CFX/TA showing that CFX lost its zwitterionic form and exhibiting distinct properties to CFX/HCl as assessed by FTIR and thermal analysis. Particles exhibited mass mean aerodynamic diameter (MMAD) of 3.3 µm, emitted dose of 78% and fine particle dose of 85%. Particles were further evaluated via antimicrobial assessment of minimum inhibitory concentrations (MIC) and minimum biofilm eradication concentration (MBEC). MIC and MBEC results showed that the hybrid particles were around 3-5 times more effective when compared to CFX signifying that synergistic effect was achieved. Diffusing wave spectroscopy results showed that the silver containing particles had a disruptive effect on rheological properties as opposed to silver free particles. CONCLUSIONS: Overall, these results showed the potential to use particle engineering to generate particles that are highly disruptive of bacterial biofilms.

Solubility Improvement of Progesterone from Solid Dispersions Prepared by Solvent Evaporation and Co-milling.

The aim of this contribution was to evaluate the impact of processing methods and polymeric carriers on the physicochemical properties of solid dispersions of the poorly soluble drug progesterone (PG). Five polymers: hydroxypropyl methylcellulose (HPMC), hydroxypropyl methylcellulose acetate succinate (HPMCAS), microcrystalline cellulose (MCC), polyvinylpyrrolidone (PVP) and silica (SiO2), and two processing methods: solvent evaporation (SE) and mechano-chemical activation by co-milling (BM) were applied. H-bonding was demonstrated by FTIR spectra as clear shifting of drug peaks at 1707 cm-1 (C20 carbonyl) and 1668 cm-1 (C3 carbonyl). Additionally, spectroscopic and thermal analysis revealed the presence of unstable PG II polymorphic form and a second heating DSC cycle, the presence of another polymorph possibly assigned to form III, but their influence on drug solubility was not apparent. Except for PG-MCC, solid dispersions improved drug solubility compared to physical mixtures. For SE dispersions, an inverse relationship was found between drug water solubility and drug-polymer Hansen solubility parameter difference (Δδt), whereas for BM dispersions, the solubility was influenced by both the intermolecular interactions and the polymer Tg. Solubility improvement with SE was demonstrated for all except PG-MCC dispersions, whereas improvement with BM was demonstrated by the PG-HPMC, PG-PVP and PG-HPMCAS dispersions, the last showing impressive increase from 34.21 to 82.13 µg/mL. The extensive H-bonding between PG and HPMCAS was proved by FTIR analysis of the dispersion in the liquid state. In conclusion, although SE improved drug solubility, BM gave more than twice greater improvement. This indicates that directly operating intermolecular forces are more efficient than the solvent mediated.

Griseofulvin solvate solid dispersions with synergistic effect against fungal biofilms.

Fungal biofilms are invariably recalcitrant to antifungal drugs and thus can cause recurrent serious infections. The aim of this work was to prepare highly effective form of the antifungal drug griseofulvin using the chloroform solvate embedded into different polymeric matrices. Based on their solid solubility, solvated (chloroform) and non-solvated (methanol and acetone) solid dispersions were prepared using different materials: silica, microcrystalline cellulose, polyvinylpyrrolidone and hydroxypropyl methylcellulose acetate succinate (HPMCAS) by which HPMCAS dispersions showed the highest solubility of about 200 µg/mL compared with ∼30 µg/mL for pure griseofulvin. The anti fungal potential of griseofulvin was assessed against the dermatophytes T. rubrum. Metabolic and protease activity of T. rubrum NCPF 935 with and without the presence of GF:HPMCAS chloroform solvates showed significant reduction compared to the untreated control after 24 h period. Confocal laser scanning microscopy showed thin hyphae compared to Control and GF:HPMCAS (non solvated). Dynamic vapour sorption data showed that HPMCAS formed most stable solvate structure preventing recrystallization and solvate expulsion, which could explain the disruptive effect of the biofilms. This could be explained by the formed hydrogen bonds as revealed by the solid and liquid state NMR data, which was further confirmed via thermal and FTIR analyses.

Fabrication of inhaled hybrid silver/ciprofloxacin nanoparticles with synergetic effect against Pseudomonas aeruginosa.

Ciprofloxacin (CFX) is a fluoroquinolone antibiotic used as a first line treatment against infections caused by Pseudomonas aeruginosa and Streptococcus pneumonia that are commonly acquired by cystic fibrosis (CF) patients. However, no inhalation formulation is currently available for ciprofloxacin. Hybrid silica coated silver nanoparticles were prepared using Stöber reaction and the optimum ratio of chitosan and sodium tripolyphosphate was used to encapsulate CFX. Particle deposition was assessed in vitro using twin stage impinger while antimicrobial activity was evaluated based on the planktonic growth of P. aeruginosa as well as against P. aeruginosa sp biofilm formation. In vitro deposition results showed significant deposition in stage 2 using twin stage impinger (TSI) (∼70%). Compared to CFX, the formed hybrid nanoparticles were 3-4 folds more effective against inhibiting growth and biofilm formation by P. aeruginosa PAO1 and P. aeruginosa NCTC 10662.

Amorphous and Crystalline Particulates: Challenges and Perspectives in Drug Delivery.

Crystalline and amorphous dispersions have been the focus of academic and industrial research due to their potential role in formulating poorly water-soluble drugs. This review looks at the progress made starting with crystalline carriers in the form of eutectics moving towards more complex crystalline mixtures. It also covers using glassy polymers to maintain the drug as amorphous exhibiting higher energy and entropy. However, the amorphous form tends to recrystallize on storage, which limits the benefits of this approach. Specific interactions between the drug and the polymer may retard this spontaneous conversion of the amorphous drug. Some studies have shown that it is possible to maintain the drug in the amorphous form for extended periods of time. For the drug and the polymer to form a stable mixture they have to be miscible on a molecular basis. Another form of solid dispersions is pharmaceutical co-crystals, for which research has focused on understanding the chemistry, crystal engineering and physico-chemical properties. USFDA has issued a guidance in April 2013 suggesting that the co-crystals as a pharmaceutical product may be a reality; but just not yet! While some of the research is still oriented towards application of these carriers, understanding the mechanism by which drug-carrier miscibility occurs is also covered. Within this context is the use of thermodynamic models such as Flory-Huggins model with some examples of studies used to predict miscibility.

Atypical effects of incorporated surfactants on stability and dissolution properties of amorphous polymeric dispersions.

OBJECTIVES: To understand the impact of ionic and non-ionic surfactants on the dissolution and stability properties of amorphous polymeric dispersions using griseofulvin (GF) as a model for poorly soluble drugs. METHODS: Solid dispersions of the poorly water-soluble drug, griseofulvin (GF) and the polymers, poly(vinylpyrrolidone) (PVP) and poly(2-hydroxypropyl methacrylate) (PHPMA), have been prepared by spray drying and bead milling and the effect of the ionic and non-ionic surfactants, namely sodium dodecyl sulphate (SDS) and Tween-80, on the physico-chemical properties of the solid dispersions studied. KEY FINDINGS: The X-ray powder diffraction data and hot-stage microscopy showed a fast re-crystallisation of GF. While dynamic vapour sorption (DVS) measurements indicated an increased water uptake, slow dissolution rates were observed for the solid dispersions incorporating surfactants. The order by which surfactants free dispersions were prepared seemed critical as indicated by DVS and thermal analysis. Dispersions prepared by milling with SDS showed significantly better stability than spray-dried dispersions (drug remained amorphous for more than 6 months) as well as improved dissolution profile. CONCLUSIONS: We suggest that surfactants can hinder the dissolution by promoting aggregation of polymeric chains, however that effect depends mainly on how the particles were prepared.

Drug solubilisation in lipid nanoparticles containing high melting point triglycerides.

The effect of lipid (either the triglyceride trilaurin or tripalmitin, melting points of 43 and 64 °C, respectively) on the properties of lipid nanoparticles (LN) stabilised by the surfactant, polyoxyethylene-10-oleyl ether (C18:1E10) at a temperature of 22 °C, has been determined. LN were prepared by heating lipid, surfactant and water to 70 °C and cooling to ambient temperature with constant stirring. While lipid type influenced LN formation in that trilaurin-containing LN formed over the greatest range of compositions, phase inversion studies suggested that both lipids formed a core within the LN while light scattering studies indicated that the size of both types of LN varied with lipid concentration: in an approximately linear fashion for clear or opalescent LN and exponentially for cloudy LN. Additionally, both types of preformed LN exhibited an increase in solubilisation capacity of the hydrophobic drug, testosterone propionate compared to C18:1E10 micelles, although the trilaurin-containing LN exhibited the greatest increase. Differential scanning calorimetry studies demonstrated that trilaurin formed a 'fluid-like' core and therefore liquefied-lipid nanoparticles, which allowed dissolution of testosterone propionate in the lipid core. In contrast, tripalmitin was present in a 'solid-like' state forming solid lipid nanoparticles which did not allow testosterone propionate dissolution in the core.

Effect of drug-polymer interactions on the aqueous solubility of milled solid dispersions.

The role of molecular interactions in ball milled solid dispersions in determining the aqueous solubility of the poorly water-soluble drug, griseofulvin (GF) has been examined. Ball milled solid dispersions of GF and hydroxypropylmethylcellulose acetate succinate (HPMCAS) and GF and polyvinylpyrrolidone (PVP) were prepared and characterized by laser diffraction, scanning electron microscopy and X-ray powder diffraction and the aqueous saturation solubility measured and analyzed using one way ANOVA. The results showed that solid dispersions of GF and HPMCAS possessed an aqueous GF saturation solubility of about ten times higher than the GF solubility achieved from PVP-based solid dispersions. Furthermore, although the aqueous solubility of GF did not vary with the milling conditions used to prepare the solid dispersions with PVP, significant changes in solubility were observed upon changing the milling conditions for preparation of the GF/HPMCAS solid dispersions. Surprisingly, the GF/HPMCAS solid dispersion prepared using spray drying exhibited a significantly lower aqueous solubility than those prepared by bead milling despite their smaller particle size and GF being fully in its amorphous form. It is thought that the higher surface energy of the spray-dried solid dispersions negatively affected the aqueous solubility of GF. In conclusion, the results suggest that the molecular interactions occurring between GF and HPMCAS affect the aqueous solubility of GF and that the molecular interactions appear to remain in the liquid state. In contrast no molecular interactions were evident in the GF/PVP solid dispersions.