Optimization of foaming process for development of modified aloe polysaccharide (MAP) juice and powder using foam-mat drying.

The present study was performed to optimize the modified aloe polysaccharide (MAP) foaming process and to determine the effect of drying process parameters on the quality of obtained MAP powder. The studied process parameters were glycerol monostearate (GMS), carboxymethyl cellulose (CMC), and whipping time (WT) which was varied between 1 and 4% w/v, 0.1-0.5% w/v, and 1-5 min, respectively. The optimized values of foaming process parameters were 3.87% GMS, 0.39% CMC, and 4.89 min WT with a desirability of 0.889. The optimized foamed MAP juice was dried at different foam thicknesses (FT) (1, 3, and 5 mm) and drying temperatures (DT) (50, 60, and 70 °C) to develop MAP powder and compared with non-foamed aloe powder developed under the same drying condition. Based on functional properties, the best GMS foamed MAP powder was achieved at 50 °C DT and 1 mm FT, recording powder yield (16%), solubility (20.85%), and polysaccharide content (282 mg/L). Supplementary Information: The online version contains supplementary material available at 10.1007/s10068-023-01354-6.

Application of thermosonication for guava juice processing: Impacts on bioactive, microbial, enzymatic and quality attributes.

The present work explores different conditions of thermosonication (TS) processing that would ensure microbiological and enzymatic safety for guava juice while simultaneously maximizing the preservation of its quality attributes. The guava juice was subjected to TS treatment (frequency: 40 kHz; power: 200 W; Temperature: 40, 60, and 80 °C; Time: 2, 6 and 10 min) and was compared with fresh and pasteurized (90 °C/60 s) juice samples. The objectives of the research work were to determine the effect of thermosonication on the quality attributes such as total soluble solids (TSS), pH, titratable acidity, cloud value, color attributes, total phenolic contents, total flavonoid contents, antioxidant activity, ascorbic acid levels, enzymatic, microbiological, and sensory properties. The thermosonicated and pasteurized samples showed no significant (p > 0.05) changes in pH, total soluble solids, and titratable acidity. TS improved the cloud value and color attributes. Furthermore, TS enhanced total phenols (10 to17%), flavonoids (5 to 25%), antioxidant activity (10.45% to 14.55%) and retention of ascorbic acid (61.98-83.32%) relative to control. Thermosonicated sample at 80 °C/10 min gives the maximum inactivation of Pectin methyl esterase (PME), Peroxidase (POD) and Polyphenol oxidase (PPO) enzymes. While both thermosonication and pasteurization drastically decreased the microbial count to undetectable levels, only TS exhibited modest improvement in sensory qualities. The results demonstrated that TS can enhance the overall safety, quality, and commercial viability of guava juice as a practical substitute to pasteurization.

A chemometric approach to evaluate the effects of probe-type ultrasonication on the enzyme inactivation and quality attributes of fresh amla juice.

The enzymatic browning induced in amla juice due to the high activity of polyphenol oxidase (PPO) and peroxidase (POD) is one of the critical issues faced by the industry. The present study assessed the suitability of non-thermal, high-intensity ultrasound (US) on the inactivation of PPO and POD in fresh Indian Gooseberry juice. Ultrasonic waves, using a 6 mm titanium alloy probe were irradiated in the juice at a maximum power of 455 W and frequency of 20 kHz. The subsequent effects on biochemical attributes were studied using response surface methodology. Inactivation rates of 90.72 % and 73.18 %, respectively, for PPO and POD enzymes, were observed at the highest US intensity and exposure time. Numerical optimisation using the three-factor, three-level Box-Behnken design suggested that an optimum process at 70 % (energy density: 1610 Wcm-2) pulsed at 5 s on and 5 s off for 7 min 30 s resulted in PPO and POD inactivation of the order of 76.42 % and 64.57 % respectively. At these experimental conditions, the optimized levels of biochemical attributes i.e., ascorbic acid (738.50 mg/100 mL), total phenols (17.10 mg/mL), DPPH antioxidant activity (58.47 %), tannins (7.11 µg/mL), colour change (ΔE = 9.04) and flavonoids (6.14 mg/mL) were achieved. The overall statistical models were significant for all the responses except for reducing sugars. Furthermore, the approximation equations for individual responses indicated that the goodness of fit was adequate (R2 > 0.90). The results suggested that ultrasound is a suitable processing technique for amla juice stabilisation compared to thermal treatments that result in the loss of quality.

Understanding the effects of ultrasound processng on texture and rheological properties of food.

The demand for the production of high quality and safe food products has been ever increasing. Consequently, the industry is looking for novel technologies in food processing operations that are cost-effective, rapid and have a better efficiency over traditional methods. Ultrasound is well-known technology to enhance the rate of heat and mass transfer providing a high end-product quality, at just a fraction of time and energy normally required for conventional methods. The irradiation of foods with ultrasound creates acoustic cavitation that has been used to cause desirable changes in the treated products. The technology is being successfully used in various unit operations such as sterilization, pasteurization, extraction, drying, emulsification, degassing, enhancing oxidation, thawing, freezing and crystallization, brining, pickling, foaming and rehydration, and so forth. However, the high pressure and temperature associated with the cavitation process is expected to induce some changes in the textural and rheological properties of foods which form an important aspect of product quality in terms of consumer acceptability. The present review is aimed to focus on the effects of ultrasound processing on the textural and rheological properties of food products and how these properties are influenced by the process variables.