Biosynthesis, Structural, Spectroscopic, Photoluminescence, and Antifungal Activity of Ni-doped CeO2 Nanoparticles.

Pedalium Murex leaf extract was used in this study to create Nickel-doped Cerium oxide (Ni-CeO2) nanoparticles at 3 mol% and 5 mol% molar concentrations. The biosynthesized process was applied for the fabrication of Ni-CeO2 NPs. The X-ray diffraction method was used to identify their crystal structure. The XRD measurements showed that the Ni-CeO2 NPs crystallized into the face-centred cubic system. Fourier transform infrared spectral study was applied to explore the molecular vibrations and chemical bonding. The surface texture and chemical ingredients of Ni-CeO2 NPs were studied using field-emission scanning electron microscopy and energy-dispersive X-ray analysis. The EDX mapping spectra illustrate the uniform dispersal of Ce, Ni, and O atoms over the sample's surface. X-ray photoelectron spectroscopy (XPS) was conducted to confirm the chemical state of the Ni-CeO2 NPs. UV-Vis spectrum study was performed to ascertain the photon absorption, bandgap, and Urbach edge of Ni-CeO2 NPs. Photoluminescence (PL) research has been used to study the light-emitting characteristic of Ni-CeO2 NPs. The emissive intensity transition corresponding to Ni-CeO2 NPs was found to increase with the dopant level. The CIE 1931 chromaticity map was plotted to find the aptness of the samples for optical uses. The antifungal ability of Ni-CeO2 NPs was evaluated against the fungi candida albicans and candida krusein with the agar well-diffusion process. The fungicidal activity of the 3 mol% Ni doped CeO2 nanoparticles has shown a maximum zone of inhibition. The experimental findings illustrate the utility of Ni-CeO2 NPs for optical and antifungal applications.

Synthesis, Structural, and Optical Properties of 2-(2-methyl 8-hydroxyquinoline) Magnesium Nanorods for Optical Display Systems.

Organic semiconductors find widespread applications in the realm of organic light-emitting diodes (OLEDs) as well as organic photovoltaic cells. In the domain of OLED devices, it is plausible for nano-based Mg metal complexes to play a role as electron and hole-transport layers. In the present investigation, we synthesized 2(2-methyl 8-hydroxyquinoline) magnesium [Mg(mq)2] nanorods through the employment of the precipitation method, using 2-methyl 8- hydroxyquinoline and magnesium acetate. We employed various techniques to characterize the Mg(mq)2 nanorods, including powder XRD, FTIR spectroscopy, SEM, EDX, UV-Vis, and PL spectroscopy studies. The structural aspects of Mg(mq)2 were ascertained through P-XRD analysis. The elemental composition of Mg(mq)2 and its surface texture were established via EDX and HR-SEM analyses. FTIR spectroscopy confirmed the existence of functional groups within the sample. UV-Vis spectroscopy was utilized to evaluate the optical absorbance, bandgap, and Urbach energy of Mg(mq)2. The luminescence properties of the Mg(mq)2 nanorods were determined from the photoluminescence study. The characterization results were compared with the Zn(mq)2 nano samples. The experimental results presented herein serve to demonstrate the practicality of employing Mg(mq)2 nanorods in OLED devices.

Synthesis, Spectroscopic, and Antibacterial Characterizations of Cadmium-Based Nanoparticles.

In the current study, the co-precipitation technique was employed for the synthesis of Cadmium oxide (CdO) and Copper‒doped Cadmium oxide (Cu‒CdO) nanoparticles. The synthesized samples were subjected to powder X-Ray diffraction (P-XRD), Field emission scanning electron microscopy (FE-SEM), Energy-dispersive X-ray (EDX), Fourier transforms Infrared (FT-IR), UV-Vis spectroscopy, photoluminescence (PL), laser-induced fluorescence spectroscopy and antibacterial investigations. According to the P-XRD analysis, both the samples were simple cubic in structure and have average grain sizes of 54 and 28 nm, respectively. FE-SEM was deployed to explore the surface textures of the samples. EDX technique was used to look at the elemental compositions of the samples. The technique of FT-IR was employed to identify the vibrational modes. UV-Vis spectra in diffuse reflectance mode were obtained and the optical bandgaps of the CdO and Cu‒CdO samples were obtained as 4.52 eV and 2.83 eV, respectively. The photoluminescence studies were conducted at an excitation wavelength of 300 nm and emission peaks were red-shifted in both samples. Fluorescence spectroscopy was applied to explore the lifetimes of synthesized nanoparticles. The technique of Agar-well diffusion was applied to assess the antibacterial performance of the generated nanoparticles against Micrococcus Luteus (gram-positive) and Escherichia coli (gram-negative) bacterium at variable concentrations. Both samples in the current study are significantly effective against both bacterial strains.

Biosynthesis, Spectroscopic, and Antibacterial Investigations of Silver Nanoparticles.

Silver nanoparticles can be produced by an array of procedures, such as chemical, physical, and biological processes. The process of biosynthesis is more economical and significantly more environmentally friendly. We describe an environmentally compatible method (biosynthesis) of producing silver nanoparticles (Ag: NPs) with the capping component Artocarpus heterophyllus in this research work. Powder-X-ray crystallography (P-XRD), Fourier Transform Infrared (FT-IR), UV-visible (UV-Vis), Photoluminescence (PL), Field emission scanning electron microscopy (FE-SEM), and an antimicrobial test were all used to examine the synthesized samples. The P-XRD analysis revealed that the produced NPs have an FCC form with a typical particle size of 23 nm. FT-IR spectra further demonstrate the availability of the functional groups in the synthesized nanoparticles. The absorbance and transmittance spectra of the UV-Vis study have shown substantial transparency and less absorbance of the Ag: NPs in the entire visible region. The bandgap of the Ag: NPs was found to be 3.25 eV using the Tauc relation. In the PL study, an emission peak at 472 nm was found, suggesting the fluorescence emission of Ag: NPs. The FE-SEM micrographs provide confirmation of the surface-wide aggregate of nanostructural homogeneities. The FE-SEM micrographs illustrate that Ag: NPs are homogeneous aggregates of very small spheres. Variations in particle size and surface area-to-volume ratios of synthesized NPs have been proven to be responsible for the antibacterial activities. According to the antibacterial study, Ag: NPs restrain the development of both normal and harmful bacteria and so have the potential to be utilized for coating surgical equipment for aseptic operators in the healthcare industry.

Synthesis, Structural, Spectroscopic, Fluorescence, and Dielectric Studies of Bis-(4-Aminopyridine)-Zinc(II) Acetate: A Metal-Organic Crystal.

The advancement of crystalline growth and characterization tools allows us to investigate novel nonlinear optical substances suitable for photonic applications. Bis-(4-aminopyridine)-zinc(II) acetate (B4AZA), a metal-organic crystal was produced in this study using the slow evaporation procedure at room temperature. Analytical studies such as X-ray crystallography, Fourier transform infrared (FT-IR), UV-visible (UV-Vis), fluorescence, second harmonic generation (SHG), and dielectric tests were used to characterize the as-grown B4AZA crystals. According to the solubility data, the sample has a positive temperature coefficient of solubility. The crystallographic findings show that the B4AZA crystallized in a monoclinic structure with the P21/n space group. Molecular vibrations and functional groups in the substance were determined using the FT-IR technique. The UV-Vis absorbance and transmittance spectra have shown the wide transparency and minimum absorbance of the B4AZA in the near UV and entire visible regions of the electromagnetic spectrum. The bandgap of the B4AZA has been calculated using the Tauc relation and found to be 4.32 eV. The fluorescence spectra have shown a prominent emission peak at 584 nm with an excitation wavelength of 280 nm. The larger Stokes shift found in the fluorescence spectra is advantageous for practical applications. The SHG study revealed that the powdered B4AZA samples generated a second harmonic output. The dielectric test revealed frequency-dependent changes in the dielectric constant and loss factor. Both the dielectric constant and the loss factor decrease exponentially as frequency increases, reaching low values at higher frequencies. The experimental results illustrate the suitability of the B4AZA crystals for photonic applications.

Synthesis, Spectroscopic, Optical, and Thermal Characterizations of Zinc (Tris)-Thiourea Sulfate: A Metal-Organic Crystal.

In the current research, Zinc (tris)-thiourea sulfate (ZTTS), a metal-organic crystal, has been synthesized using the slow solvent evaporation technique. Powder-X-ray diffraction (PXRD) analysis, Fourier transform infrared (FT-IR) spectroscopy, UV-Vis spectroscopy, photoluminescence (PL) spectroscopy, and thermal, and second harmonic generation measurements have all been applied to describe the as-synthesized ZTTS crystals. The synthesized samples crystallized in an orthorhombic structure, based on XRD analysis. The functional groups of ZTTS samples were validated by FT-IR analysis. The extensive transparency of ZTTS over the UV-visible spectral region has been confirmed by UV-Vis analysis and the band gap has been estimated as 4.43 eV. The photoluminescence spectra exhibit a prominent emission peak around the wavelength of 484 nm and significant emission peaks at 444 and 513 nm with an excitation wavelength of 250 nm. The SHG test illustrates the creation of second harmonic signals from the ZTTS samples. The thermal response of the as-synthesized ZTTS was shown by the TG/DTA measurements. The results suggest that as-synthesized ZTTS crystals could be used as a possible nonlinear optical substance.