Retention of Mandibular Complete Overdentures using Mini Dental Implants (Ø < 3 mm) and Standard Diameter Implants (Ø > 3mm): A Systematic Review and Meta-Analysis of Randomised Controlled Trials.

PURPOSE: The objective of the present systematic review and meta-analysis was to assess randomised controlled trials (RCTs) which assessed the efficacy of mini dental implants (MDIs) and standard-diameter implants (SDIs) in retaining mandibular overdentures (MO). MATERIALS AND METHODS: The focused question was "Is there a difference in the mechanical stability between MDIs and SDIs in retaining MO?" Indexed databases were searched up to and including November 2023 using different keywords. Boolean operators were used during the search. The literature was searched in accordance with the PRISMA guidelines. The PICO characteristics were: patients (P) = individuals with complete mandibular dentures requiring dental implants; Intervention (I) = placement of MDIs under mandibular dentures; Control (C) = placement of SDIs under mandibular dentures; Outcome (O) = comparison of stability between MDIs and SDIs in supporting mandibular dentures. Only RCTs were included. Risk of bias (RoB) was assessed using the Cochrane RoB tool. RESULTS: Five RCTs were included. The numbers of participants ranged between 45 and 120 edentulous individuals wearing complete mandibular dentures. The mean age of patients ranged between 59.5 ± 8.5 and 68.3 ± 8.5 years. The number of MDIs and SDIs ranged between 22 and 152 and 10 and 80 implants, respectively. The follow-up duration ranged between one week and 12 months. Three RCTs reported an improvement in the quality of life (QoL) of all patients after stabilisation of mandibular dentures using MDIs or SDIs. In one RCT, peri-implant soft tissue profiles were comparable between MDIs and SDIs at the 1-year follow-up. The implant survival rate was reported in two RCTs, which were from 89% to 98% and 99% to 100% for MDIs and SDIs, respectively. All RCTs had a low RoB. CONCLUSION: Mini dental implants represent a viable alternative to traditional standard-diameter implants when seeking optimal retention for mandibular overdentures.

Dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models over periods of time.

BACKGROUND: Dental casts made utilising digital workflow are becoming more common because to their speed and cost savings. However, studies on their dimensional accuracy over time with diverse designs are missing. OBJECTIVE: The aim of this in vitro study was to assess the dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models with 50-micrometer resolution over 1 day, 14 days, and 28 days using surface matching software. METHODS: Scanned edentulous and fully dentate maxillary typodont models were used as references. The models were scanned by a desktop lab scanner of 15-micrometer accuracy (D900, 3Shape). Then, the files were used in designing software (Meshmixer, Autodesk) to create hollowed maxillary casts. Fifteen edentulous and 15 fully dentate (total of 30) models were printed using a DLP lab printer (Cara print 4.0, Kulzer). The 3D-printed models were scanned using the same desktop lab scanner of 15-micrometer accuracy at intervals of baseline days, 1 day, 14 days, and 28 days to assess the effect of aging (n = 120). The dimensional changes were quantified and compared using the root mean square (RMS) method, expressed in micrometres (µm). The study employed repeated measures analysis of variance (ANOVA) to assess and compare the root mean square (RMS) values across the variables. The data was analysed using SPSS (26, Chicago, Illinois, USA). RESULTS: The RMS of the edentulous models rapidly increased from a mean value of 0.257 at the beginning of the study to 0.384 after twenty-eight days. However, the mean RMS values for the dentate models did not change much over the four intervals. It varied only from 0.355 to 0.347. The mean values for edentulous patients increased from 0.014 to 0.029 during the period from baseline to twenty-eight days. However, the mean average values decreased for the dentate models from 0.033 to 0.014 during this period. By utilizing ANOVA, mean RMS values increased insignificantly till one day but significantly to fourteen and twenty-eight days. Dentate model mean values differed insignificantly across four intervals. Repeated measures ANOVA for combined and separated data showed no significant differences across edentulous, dentate, and total models over times. CONCLUSION: The study revealed changes in the dimensions of 3D-printed edentulous models over a span of 3 and 4 weeks. Caution should be applied when using 3D-printed dental master models for constructing definitive prostheses on edentulous models over a period of 3 to 4 weeks.

Perceptions and Knowledge of Undergraduate Dental Students about Artificial Intelligence in Dental Schools: A Cross-sectional Study.

OBJECTIVE: This study aims to assess the perceptions and knowledge of undergraduate dental students about artificial intelligence (AI) in dental schools through a cross-sectional study. MATERIALS AND METHODS: This was a multicenter, cross-sectional study. Participant recruitment was achieved by sending an online questionnaire to the undergraduate students at the assigned universities. The questionnaire consisted of two parts. The first seven questions record general information about participants and their perceptions of AI. The remaining questions are about the knowledge of participants about the applications of AI. The data were analyzed using SPSS version 26. RESULTS: About 165 undergraduate students from 20 universities related to the dental sciences responded to the questionnaire. And 80.6% of participants found the use of AI in dentistry exciting. I have a basic knowledge of the working principles of AI. About 80.6% of participants believe that applications of AI should be part of undergraduate dental training. And 66.6% of students are aware of the opportunities and threats that AI can create. The results show that 75% of the students indicated that they got their information about AI through social media. Regarding the association of years of studies with AI applications used in periodontics, the knowledge about AI applications in "aggressive periodontics," "compromised teeth," and "success in rate of dental implant" was significantly higher in senior students than junior students (p < 0.05). Concerning applications of AI used in restorative dentistry and prosthodontics, only "computer color matching," "tooth surface losses," and "I do not know" showed statistical significance (p < 0.05) with the year of study of participants. Senior students show significantly better knowledge in "success in retreatment" and "working length determinant." CONCLUSION: Although undergraduates are enthusiastic about AI and aware of its threats and benefits, their knowledge is limited. In addition, undergraduate programs must exert more effort to prepare students for the era of AI. How to cite this article: Aldowah O, Almakrami A, Alghuwaynim Y, et al. Perceptions and Knowledge of Undergraduate Dental Students about Artificial Intelligence in Dental Schools: A Cross-sectional Study. J Contemp Dent Pract 2024;25(2):148-155.

The Influence of the Clinicians' Experience on the Outcome of Dental Implants: A Clinical Audit.

The purpose of this outcome audit is to evaluate the influence of the clinicians' experience on the outcome of dental implants. In addition, it is to identify the associated risk factors that might influence the success and survival of these implants. METHODOLOGY: The records of patients treated with SLA/SLActive Straumann implants were screened. This enabled us to have a minimum of 12 months of follow-up. Eligible patients, according to the inclusion criteria, were contacted and invited to undergo a follow-up assessment. Success was accounted for and defined in a comprehensive manner by considering four different categories: implant perspective, peri-implant soft tissue perspective, prosthetic perspective, and patient satisfaction. The patient investigations included a clinical examination of the implant mobility, suppuration, width of keratinized mucosa, probing depth, plaque accumulation, prosthetic complications, and patient satisfaction. In addition, a periapical radiograph was taken to evaluate bone loss and peri-implant radiolucency. The data were analysed using SPSS version 26. RESULTS: Thirty-eight patients with 84 SLA/SLActive Straumann implants were available for the assessment. The mean age of the patients at implant surgery was 49.05 ± 13.19 years. Over the mean follow-up period of 26 months, no implant fractures were noted. Overall, eight implants were considered failures (9.5%). Two out of six patients with a history of periodontitis (HoP) and two out of five smokers exhibited failed implants. The patients' satisfaction responses showed that all the responses were statistically higher than the test median value of three. The median value of general satisfaction using a visual analogue scale was 9 out of 10. CONCLUSIONS: The implants placed on partially and fully edentulous patients revealed high survival and success rates (100% and 90.5%, respectively) at a mean follow-up time of 26 months. It can be concluded that the implant practise among trainees in the programme is satisfactory. A history of periodontitis and a lack of patient compliance with supportive periodontal therapy in some cases have been shown to be risk factors associated with increased implant failure, mainly peri-implantitis.

Assessment of oral health knowledge, literacy, and attitude among schoolteachers towards oral health - A cross-sectional study.

BACKGROUND: To accomplish the purpose of health education and health promotion programs, schools are the most effective place for delivering health information to children. The main purpose of our research was to inform, gather evidence and contribute to developing knowledge regarding the OHL, knowledge, and attitude among school teachers towards oral health in Najran region of Saudi Arabia. METHODS: A questionnaire-based cross-sectional study was conducted in Najran region of Saudi Arabia for 6 months. A stratified cluster random sampling of 252 teachers was taken to represent all the teachers of Najran region of Saudi Arabia. The questionnaire contains 2 parts, sociodemographic part that include age, gender, education, teaching level, and income of the participants. The second part contains 25 items that assess the OHL (HelD-14 questions), knowledge (6 questions), and attitude (5 questions) of the participants. SPSS software version 26 was used to enter and analyze the data (IBM SPSS, Chicago, IL, USA software version 26.0). Multiple Logistic regression was applied to check the relationship between OHL and the associated factors. The Chi-square test was applied to evaluate knowledge of study participants. The level of significance was set up at p < 0.05. RESULTS: A total of 252 school teachers with a Mean age of school teachers 32.25 ± 8.46 participated in the study. The multiple logistic regression model shows the association between age, education, and OHL level of school teachers. After adjustment for sociodemographic factors age (OR = 0.219, 95% CI: 0.058-0.834), education (OR = 9.053, 95% CI: 1.135-72,023) were significantly associated with OHL of school teachers. Female participants showed better performance with respect to all the knowledge questions, a significantly higher level of knowledge (p-value < 0.05) was reported with all the questions except the second question (dental plaques causes). 94.8% of teachers agreed that children's teeth should be checked by a dentist on a regular basis, while 96.8% agreed that dental health education should be included in the primary school curriculum and that all teachers should receive dental health education training. CONCLUSION: Overall, school teachers have high oral health literacy, adequate knowledge, and a positive attitude toward oral health. The female teachers had more knowledge about dentistry than their male counterparts.

Ocular Findings in Patients with Orbital Fractures: A 1-Year Prospective Study in a Tertiary Center.

Background and Objectives: The aim of this study was to study the prevalence of ocular findings in patients with orbital fractures in a tertiary center in Saudi Arabia. Materials and methods: A cross-sectional observational study was performed. The participants were patients who presented with orbital trauma to the emergency department of King Saud Medical City (Riyadh, Saudi Arabia). Subjects included those diagnosed with isolated orbital fracture using clinical evaluation and CT examination. We performed direct evaluation of ocular findings for all patients. Variables studied included age, gender, site of ocular fracture, cause of trauma, side of fracture, and ocular findings. Results: In total, 74 patients with orbital fractures were included in this study (n = 74). Of the 74 patients, 69 (93.2%) were males and only 5 patients (6.8%) were females. The age range was 8-70 years, with a median age of 27 years. The 27.5-32.6-year age group was the most affected (95.0%). The left orbital bone was involved in the majority of bone fractures 48 (64.9%). The orbital floor (n = 52, 41.9%) and lateral wall (n = 31, 25.0%) were the most prevalent sites of bone fracture among the study patients. Road traffic accidents (RTAs) were the most common causes (64.9%) of orbital fractures, followed by assaults (16.2%) and then sports injuries and falls (9.5% and 8.1%, respectively). Animal attacks were the least cause of trauma (only 1 patient, 1.4%). The occurrence of ocular findings, either alone or in combination, showed that subconjunctival hemorrhage had the highest percentage (52.0%), followed by edema (17.6%) and ecchymosis (13.6%). A statistically significant correlation was reported between the site of bone fracture and orbital findings, with r = 0.251 * and p < 0.05. Conclusions: Subconjunctival bleeding, edema, and ecchymosis were the most frequent ocular abnormalities, in that order. There were a few instances of diplopia, exophthalmos, and paresthesia. Other ocular discoveries were incredibly uncommon. The location of bone fractures was found to be significantly correlated with ocular results.

The Ability of Dental Interns and Freshly Graduated Dentists to Assess Tooth Restorability. A Multicenter, Cross-Sectional Study.

Purpose: Treatment planning should be integrated to gain and apply essential data to decide. It is necessary to evaluate the endodontic and periodontal condition of the tooth, in addition to its restorability. Treatment planning is emphasized as a crucial clinical skill for a certified dental practitioner in the General Dental Council learning outcomes. The role of dental schools is to guarantee that dental graduates have the knowledge, skills, and competence to choose appropriate treatment options for teeth. The primary objective of our study was to assess the ability of dental interns and recently graduated dentists from different dental schools for tooth restorability. Participants and Method: This was a multicentral, cross-sectional study. Participant recruitment was achieved by sending an online questionnaire to the interns and graduate units at the assigned universities. The questionnaire consisted two parts. The first part record general information about participants and opinions regarding their training of restorability assessment. The second part include five hypothetical clinical case scenarios, where the participants were asked to choose the restorability decisions, rationales for the options, and prognosis of the tooth/teeth. The data was analyzed by using SPSS software version 26. Results: 104 respondents participated in this survey. The decision and prognosis of all clinical scenarios were not significantly associated with gender, experience, place of work and place of study. Only the decision and prognosis of scenario 1 showed significant relationship with place of graduation. Developing universities graduates showed significantly higher percentage for restorability as against developed universities graduates (p=0.001) and developing universities and recently established institutions graduates showed significantly higher percentage for the questionable prognosis as against developed universities graduates (p=0.018). Conclusion: The inability of dental interns and freshly graduate dental practitioners to make decisions highlighted questions regarding the condition of learning outcomes and graduate attributes.

Treatment of a large through and through periapical lesion using guided tissue regeneration: A case report of 2 years follow-up.

Proper removal of the diseased tissue, debriding the canal system, and sealing the defect or cavity, the surgeon prevents or reduces the spread of microorganisms within the periradicular tissues. Treatment modalities following the failure of root canal treatment (RCT) are root canal retreatment (ReRCT). Regeneration of periapical defects may have a significant problem in periradicular surgery. In such circumstances, the gingival connective tissue can proliferate, or the oral epithelium can migrate into the defect, preventing the development of normal trabecular bone. Hard tissue can be restored using guided tissue regeneration (GTR) in conjunction with endodontic treatment for endodontic-periodontal lesions. Treatment of large periapical defects using GTR increases overall treatment success.

Endodontic Clinical Diagnostic Skills amongst Undergraduate Dental Students: Cross-Sectional Study.

The purpose of the study was to evaluate the clinical endodontic diagnostic skills amongst undergraduate dental students at pre-clinical and clinical levels at Cardiff University School of Dentistry. An online questionnaire containing eight questions about endodontic diagnosis and hypothetical clinical scenarios was sent to all year 3rd, 4th, and 5th-year undergraduate dental students who were divided into G1, G2, and G3 groups. The data were analysed descriptively and reported in percentages. Around 121 students out of 226 responded to the questionnaire with a response rate of 53.5%. The overall correct response from G1 (3rd year) was 31.6% to 65.8%, G2 (4th year) was 73% to 93%, and G3 (5th year) was 73.2% to 92.7%. The study concludes that the 4th and 5th-year undergraduate dental students' responses to the hypothetical clinical scenarios were higher than the 3rd-year students. However, regarding questions about the endodontic diagnosis, the percentages of correct answers were similar among all the 3rd, 4th, and 5th-year students. Therefore, further studies assessing endodontic diagnostic skills amongst the same cohort of students during their progression in the undergraduate course are recommended.

Role of Natural Cross Linkers in Resin-Dentin Bond Durability: A Systematic Review and Meta-Analysis.

BACKGROUND: The role of endogenous Matrix Metallo Proteinases in resin dentin bond deterioration over time has been well documented. The present study aimed to systematically review the literature; in vitro and ex vivo studies that assessed the outcomes of natural cross-linkers for immediate and long-term tensile bond strength were included. METHODS: The manuscript search was carried out in six electronic databases-PubMed/MEDLINE, LILACS, SciELO, Cochrane, Web of Science and DOAJ, without publication year limits. Only manuscripts in English (including the translated articles) were selected, and the last search was performed in December 2020. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement was followed. RESULTS: From the 128 potentially eligible studies, 48 full-text articles were assessed for eligibility. After eligibility assessment and exclusions, 14 studies were considered for systematic review and seven studies for meta-analysis. Amongst the selected studies for meta-analysis, three had a medium and four had a low risk of bias. CONCLUSIONS: It was evidenced by the available data that Proanthocyanidin is the most efficient natural cross-linker to date, in preserving the bond strength even after ageing.

Comparative Evaluation of Tensile Bond Strength of Poly Ether Ether Ketone (PEEK) and Zirconia Copings Using Resin Cement with or without Adhesive: An In Vitro Study.

This in vitro research aimed to evaluate the Tensile Bond Strength of Poly Ether Ether Ketone and Zirconia copings using resin cement with or without Visio.link adhesive. From commercially available Zirconia and PEEK, blocks were machined milled using (CAD)/(CAM) to obtain 20 Zirconia and 20 PEEK copings. These specimens were sandblasted using 110 µm of alumina. The two main groups (20 Zirconia and 20 PEEK copings) were divided further into 4 subgroups, GROUP 1 (n = 10) PEEK substructure with self-adhesive resin cement without pretreatment, and GROUP 2 (n = 10) PEEK substructure with self-adhesive resin cement pre-treated with Visio.link adhesive. GROUP 3 (n = 10) Zirconia copings with self-adhesive resin cement without pretreatment. GROUP 4 (n = 10) Zirconia copings with self-adhesive resin cement pre-treated with Visio.link adhesive. Universal testing machine was used to evaluate the tensile bond strength of these copings. The results were analyzed using SPSS software Version 25.0 (SPSS Inc., Chicago, IL, USA). One-way ANOVA and independent t-test were used to compare the mean scores. Statistically significant increase was observed in Tensile Bond Strength of samples when Visio.link adhesive was used. Tensile Bond Strength of PEEK copings and Zirconia copings with Visio.link adhesive is considerably greater than PEEK copings and Zirconia copings without adhesive. The mean Tensile Bond Strength of Zirconia (with or without adhesive) is less as compared to Tensile Bond Strength of PEEK (with or without adhesive), but the difference is not statistically significant.

Awareness and Attitude of Surgeons regarding Dental Erosion on Patients Who Underwent Bariatric Surgery.

BACKGROUND: The obesity epidemic is considered one of the main challenges for modern medicine. It has been proven that bariatric surgery is more effective than nonsurgical interventions to manage weight-related comorbidities. The general surgeon needs to understand how tooth erosion advances in gastroesophageal reflux in people who have had bariatric surgery. Dental erosion caused due to gastric reflux begins with the enamel, which is the tough, protective coating that covers our teeth. While it is tough, it is prone to an extremely acidic environment with a low pH, where it begins to soften and demineralize, gradually wearing away and exposing the more sensitive areas of the tooth. Because of the growing popularity of this subspecialty, general surgeons should develop a basic clinical and surgical understanding of these standard procedures and complications, regardless of their interest in obesity surgery. AIM: This cross-sectional study aimed to assess the awareness and attitude of surgeons regarding dental erosion on patients who underwent bariatric surgery. MATERIALS AND METHODS: This cross-sectional study was conducted on general surgeons from different regions of Saudi Arabia who perform bariatric surgeries. Data collection was done by sending the questionnaire to the general surgeons by different means of social media (WhatsApp, e-mail, Facebook, etc.), and it was also distributed through the Saudi Arabia Society of Metabolic and Bariatric Surgery. RESULTS: A total of 25 general surgeons responded to the survey. Half of the respondents know what dental erosion is, 52%. Most of them, 72%, are not aware of the relationship between dental erosion and acid reflux or vomiting. They reported that 52% of patients complain of gastroesophageal reflux disorder. CONCLUSION: The general surgeons had inadequate awareness and attitude regarding dental erosion on bariatric surgery patients. Our findings suggest that a lack of adequate awareness and a negative attitude among general surgeons are grounds for concern and that more should be done to avoid oral health complications.