Evaluation of the Best Method for Orthodontic Correction of Skeletal Deep Bites in Growing Patients: A Systematic Review.

This review aimed to evaluate the currently available evidence regarding the best method of correcting deep bites in growing patients. In September 2023, a search was conducted electronically across the following databases: PubMed®, Web of Science™, Scopus®, Embase®, Google™ Scholar, and Cochrane Library. In this systematic review, randomized control trials (RCTs), controlled clinical trials (CCTs), and cohort studies of growing patients with deep bite malocclusion who received treatment with the primary objective of treating the deep bite were included. Risk of bias of the included studies was assessed using two different tools; one tool was applied for RCTs and the other one for the CCTs and cohort studies. One RCT, one CCT, and one cohort study were included (85 patients). The flat fixed acrylic bite plane was superior in terms of duration of treatment when compared to the inclined fixed acrylic bite plane and the utility arch with posterior intermaxillary elastics. Limited evidence indicates that the inclined fixed acrylic bite plane causes a significant increase in the lower incisor inclination and a significant increase in the angle between the mandible and the anterior cranial base (SNB). However, limited evidence indicates that the utility arch with posterior intermaxillary elastics causes a significant decrease in the angle between the maxilla and the anterior cranial base (SNA). Regarding the vertical skeletal changes, it was found that the three methods were comparable; in each case, the vertical dimension of the face increased because of a significant increase in the lower first molar height. There is a need for further studies to strengthen the evidence of the treatment efficacy of the employed methods, with more RCTs to be conducted in this regard.

Evaluation of Three-Dimensional Digital Models Formulated From Direct Intra-oral Scanning of Dental Arches in Comparison With Extra-oral Scanning of Poured Dental Models in Terms of Dimensional Accuracy and Reliability.

BACKGROUND: The study's objective was to assess the dimensional accuracy and reliability of dental digital models prepared by direct intraoral scanning and indirect scanning of the plaster models compared to the plaster models as the gold standard. MATERIALS AND METHODS: This study included 20 patients. Nine had a class I malocclusion, seven had a class II malocclusion, and four had a class III malocclusion. Intraoral scanning was done for the upper and lower arches of all the patients enrolled in this study using an intraoral scanner (i700; Medit, Seoul, Korea). The next step was preparing the plaster model for the control group. Addition-silicone impressions were taken for each patient's arches. The impressions were poured according to American Board of Orthodontics (ABO) standards. Finally, the digital models of the indirect scanning group were prepared using a 3D desktop scanner (T710; Medit). In total, 26 measurements were made on the plaster and digital models. Paired t-tests were used to test for significant differences between the studied groups. The reliability of the studied techniques was tested using intraclass correlation coefficients (ICCs). Because of the multiple comparisons, the ɑ level was adjusted and set at 0.002. RESULTS: No significant differences were found between the intraoral scanning group (20 patients) and the plaster models group (20 patients; P>0.002). The ICCs ranged from 0.814 to 0.993, indicating excellent agreement between the direct digital and traditional plaster models. There were no significant differences between the digital and original plaster models (P>0.002). ICCs ranged from 0.834 to 0.995, indicating excellent agreement between the indirect digital and original plaster models. No significant differences were detected between the direct and indirect digital models (P>0.002). ICCs ranged between 0.813 and 0.999, indicating excellent agreement between direct and indirect digital models. CONCLUSION: Both direct and indirect scanning techniques are accurate and reliable for digital model preparation and can be considered an alternative to traditional plaster models used in clinical orthodontics diagnostic applications. The intraoral scanning technique can be considered a valid alternative for indirect scanning of the plaster models to prepare digital working models during the digital design and fabrication of orthodontic appliances such as clear aligners.

Evaluation of Patient-Reported Outcome Measures (PROMs) Associated With the Acceleration of Canine Retraction by Piezosurgery in Comparison With Low-Level Laser Therapy: A Three-Arm Randomized Controlled Clinical Trial.

Background and objectives Recently, both surgical and non-surgical interventions have gained popularity in accelerating orthodontic tooth movement, but there is no randomized controlled trial (RCT) comparing both modalities in terms of patient-reported outcome measures (PROMs) during maxillary canine retraction. Therefore, this trial aimed to assess the PROMs associated with either low-level laser therapy (LLLT) or piezocision-assisted acceleration in the context of maxillary canine retraction. Materials and methods This was a single-blinded, single-center, three-arm RCT. A total of 54 patients (12 males, 42 females, mean age 20.65 ± 2.85) whose treatment needed upper-first-premolar extraction to facilitate canine retraction were enrolled and randomly divided into three groups: piezocision group (PG), LLLT group (LLLTG), and the control group (CG). Standardized questionnaires using a visual analog scale were distributed to patients at five assessment times: 1 (T1), 3 (T2), 7 (T3), 14 (T4), and 28 days following the canine retraction initiation (T5). The patients' pain, discomfort, swelling, chewing difficulty, satisfaction, and acceptance were recorded. Results Regarding pain and discomfort, the levels were significantly lower in the LLLTG during the first two weeks of canine retraction compared to the other two groups (p<0.017). At the same time, these levels were significantly greater in the PG than the CG in the first week of canine retraction (p<0.017). Patients in the PG had a "mild to moderate" perception of swelling at T1 and T2, which was significantly different than that of the other two groups (p<0.001). Regarding chewing difficulty, the levels in the LLLTG were significantly lower than those in PG at the first three assessment times (p<0.017). Patients' satisfaction with canine speed was significantly greater in the intervention groups compared to the CG (p<0.001). In contrast, no statistically significant differences were found between the three groups regarding satisfaction with gum appearance surrounding the canine (p=0.061) and acceptance (p=0.125). Conclusion The LLLT-assisted canine retraction was associated with significantly lower negative patient-reported outcomes during the first two weeks of retraction than piezocision-assisted retraction. However, the levels of pain and discomfort were significantly greater in the piezocision-assisted retraction group than those in the conventional canine retraction group, which in turn were greater than those with the LLLT-assisted canine retraction group during the first week of retraction. Patient satisfaction and acceptance were high with both piezocision and LLLT interventions.

Patient-Reported Outcome Measures of Flapless Corticotomy with Low-Level Laser Therapy in En Masse Retraction of Upper Anterior Teeth: A Three-Arm Randomized Controlled Trial.

(1) Background: This study aimed to compare patient-reported outcome measures when accelerating en masse retraction between the piezocision procedure and the subsequent application of low-level laser therapy (FC+LLLT), with the piezocision alone (FC), and in a control group. (2) Methods: A three-arm randomized controlled trial (RCT) was conducted involving 60 patients (41 females and 19 males) with Class II division I malocclusion. The en masse retraction was performed using NiTi closed coil springs attached to miniscrews. The LLLT was performed using an 808 nm Ga-Al-As diode laser. Patient responses regarding pain, discomfort, swelling, and chewing difficulties were reported at ten assessment points. (3) Results: The greatest pain levels were observed 24 h after the application of force during the first and third months of retraction. The mean pain, discomfort, swelling, and chewing difficulties were significantly smaller in the control group than in the FC and FC+LLLT groups. High satisfaction levels were reported in all three groups (p < 0.05). (4) Conclusions: The accelerated en masse retraction via piezocision, followed by a small course of LLLT, was accompanied by significantly fewer pain, discomfort, and chewing difficulties than the control group. LLLT is a valuable addition to piezocision, with an improved patient experience.

Evaluation of the Impact of Orthodontic Treatment on Patients' Self-Esteem: A Systematic Review.

Malocclusion may affect interpersonal relationships, self-esteem (SE), and psychological well-being, weakening patients' psychological and social activities. Several studies investigated the effect of orthodontic treatment on these social and psychological aspects, such as SE. However, the direct relationship between SE and orthodontic treatment has not yet been confirmed. This systematic review aimed to evaluate the existing evidence in the literature concerning the influences of orthodontic treatment on patients' SE systematically and critically. An electronic search in the following databases was done in September 2022: PubMed®, Web of Science™, Scopus®, Embase®, GoogleTM Scholar, Cochrane Library databases, Trip, and OpenGrey. Then, the reference list of each candidate study was checked for any potentially linked papers that the electronic search might not have turned up. Inclusion criteria were set according to the population/intervention/comparison/outcome/study design (PICOS) framework. For the data collection and analysis, two reviewers extracted data separately. The risk of bias 2 (RoB-2) and the risk of bias in non-randomized studies (ROBINS-I) tools were used to assess the risk of bias for randomized controlled trials (RCTs) and non-RCTs, respectively. The grading of recommendations assessment, development and evaluation (GRADE) approach was employed to evaluate the quality of the evidence for each finding. Sixteen studies (five RCTs, seven cohorts, and four cross-sectional) were included in this review. Unfortunately, the results could not be pooled into a meta-analysis. Only six studies have reported an increase in SE after orthodontic treatment (P<0.05 in these studies). No agreement between the included studies was observed regarding the influence of fixed orthodontic treatment, gender, or age on SE. The quality of evidence supporting these findings ranged from very low to low. There is low evidence indicating that fixed orthodontic treatment can improve patients' SE. In addition, unclear data are available about the influence of patients' gender and age on SE after orthodontic treatment. Therefore, high-quality RCTs are required to develop stronger evidence about this issue.

Partial Pulpotomy in Mature Permanent Molars with Symptoms Indicated Irreversible Pulpitis Using MTA: A Study of Three Case Reports over Four-Year Follow-Up.

VPT is vital pulp therapy, a biologically based procedure that combines several therapeutic techniques to maintain the entire or a portion of the dental pulp. Interest in VPT has grown due to recent developments in bioactive materials and an understanding of biological pulp reparative responses. This case report is aimed at evaluating the success rate of partial pulpotomy in permanent molars with symptoms indicating irreversible pulpitis using MTA and presenting with extremely deep carious lesions over four years of follow-up. All patients came with spontaneous and severe pain. Each tooth was isolated with a rubber dam and disinfected with 5.25% NaOCl before caries excavation. After caries removal, a partial pulpotomy was performed on 2-3 mm of the exposed pulp. Bleeding time was recorded after hemostasis was achieved, and then MTA was placed over the exposed pulp. The permanent restoration was placed after pulp capping, and postoperative periapical radiographs were taken. Patients were scheduled for clinical and radiological examinations for four years based on 6-month intervals. All teeth revealed a successful outcome throughout the follow-up periods (clinically and radiographically) with complete resolution of clinical signs and symptoms. Partial pulpotomy using MTA might be an effective long-term management strategy for permanent molars clinically diagnosed with irreversible pulpitis.

The Influence of Carious Lesion and Bleeding Time on the Success of Partial Pulpotomy in Permanent Molars with Irreversible Pulpitis: A Prospective Study.

This prospective study aimed to evaluate the success rate of partial pulpotomy using mineral trioxide aggregate (MTA), in permanent molars with symptomatic irreversible pulpitis. Moreover, this study aimed to investigate the effect of carious lesion depth and activity and bleeding time on the outcome of partial pulpotomy. Forty permanent molars with deep and extremely deep carious lesions clinically diagnosed with symptomatic irreversible pulpitis were included. The status of the carious lesion was evaluated clinically and radiographically to determine its activity (rapidly or slowly progressing) and depth (deep or extremely deep). A partial pulpotomy was performed and MTA was used. Clinical and radiographic analysis were performed at 3, 6 and 12 months. Chi-square analysis and Fisher's exact test were used. Scanning electron microscope and energy dispersive X-rays were used to investigate the crystalline structures and their chemical composition onto MTA surfaces after immersion in several conditions. The partial pulpotomy was 88.9% successful, with no significant difference in outcome between deep and extremely deep carious lesions (p = 0.22) or between rapidly and slowly progressing lesions (p = 0.18). Nevertheless, all failed cases were associated with rapidly progressing lesions and extremely deep lesions. All failures occurred when the bleeding time was more than 3 min (p = 0.10). Different crystalline structures were detected on MTA surfaces, with higher calcium percentages in PBS conditions. Within the limitations of the present study, favorable results demonstrated that MTA might be recommended as a suitable agent for partial pulpotomy in permanent molars with irreversible pulpitis. The depth and activity of the carious lesion as well as the bleeding time are important factors in the success of partial pulpotomy treatment. The prolonged bleeding time and the extremely deep rapidly progressing caries could be related with the failure cases in partial pulpotomy treatment of irreversible pulpitis.

Fracture Resistance of Molars With Simulated Strip Perforation Repaired With Different Calcium Silicate-Based Cements.

Background and aims A root perforation is a connection between the root canal system and the external supportive tissues. Strip perforation (SP), occurring within root canals in a strip, can worsen the prognosis of a treated tooth, reduce its mechanical resistance, and impair the tooth structure. One of the suggested methods to treat SP is to seal it with a bio-material such as calcium silicate cement. Therefore, this in vitro study aimed to assess the molar structure impairment due to SP, which requires studying the fracture resistance, and the ability of mineral trioxide aggregate (MTA), bioceramic, and calcium-enriched mixture (CEM) to repair this perforation. Materials and methods Seventy-five molars were instrumented to size #25 and taper 4%, irrigated with sodium hypochlorite and ethylenediaminetetraacetic acid (EDTA), dried, and then divided randomly into five groups (G1-G5): in G1, root canals were filled with gutta-percha and sealer (negative control sample), whereas the rest of the groups (G2-G5) had a manual simulated SP made with Gates Glidden drill at the mesial root of the extracted molar, and filled with gutta-percha and sealer up to their perforation area; in G2, SP was filled with gutta-percha and sealer (positive control sample); G3 used MTA to repair the SP; G4 used bioceramic putty; and G5 used CEM. Fracture resistance tests of the molars were conducted in the crown-apical direction using a universal testing machine. One-way ANOVA test and Bonferroni test were used to study the significance of the differences in the mean values of the tooth fracture resistance, where statistical significance was set at 0.05. Results The ANOVA test showed that there were statistically significant differences between the fracture resistance (in newtons) values among groups (p = 0.000). The Bonferroni test showed that G2 had a smaller fracture resistance mean than the other four study groups (656.53 N; p = 0.000), and that of G5 was smaller than G1, G3, and G4 (794.40 N, 1083.73 N, 1025.20 N, and 1034.20 N, respectively; p = 0.000 in each pairwise comparison). Conclusion SP reduced the fracture resistance of endodontically treated molars. SP restored using MTA and bioceramic putty was better than that treated with CEM and similar to molars without SP. Moreover, MTA and bioceramic putty enhanced the fracture resistance of endodontically treated teeth to levels similar to molars without SP.

Evaluation of the Effectiveness of Surgical Interventions Versus Non-surgical Ones When Used in Conjunction With Fixed Appliances to Accelerate Orthodontic Tooth Movement: A Systematic Review.

The objectives of this review were to evaluate the currently available evidence regarding the effectiveness of surgical versus non-surgical acceleration methods and the side effects associated with these methods. Nine databases were searched: the Cochrane Central Register of Controlled Trials (CENTRAL), EMBASE®, Scopus®, PubMed®, Web of Science™, Google™ Scholar, Trip, OpenGrey, and PQDT OPEN from pro-Quest®. ClinicalTrials.gov and the International Clinical Trials Registry Platform Search Portal (ICTRP) were screened to explore ongoing studies and unpublished literature. Randomized controlled trials (RCTs), as well as controlled clinical trials (CCTs) of patients who received surgical interventions (invasive or minimally invasive techniques) in conjunction with traditional fixed appliances and who were compared to the non-surgical interventions, were included. The Cochrane tool for risk of bias (RoB.2) was used for evaluating RCTs, whereas the ROBINS-I tool was used for the CCTs. This systematic review included four RCTs and two CCTs (154 patients). The surgical and non-surgical interventions were found to have the same effect on orthodontic tooth movement (OTM) accelerating in four trials. In contrast, the surgical interventions were superior in the other two studies. High heterogeneity among the included studies prevented conducting the quantitative synthesis of the findings. The reported side effects related to the surgical and non-surgical interventions were similar. A "very low" to "low" evidence indicates that the effectiveness of surgical and non-surgical interventions in the acceleration of orthodontic tooth movement is similar, with no differences in the associated side effects. More high-quality clinical trials to compare the acceleration effectiveness between both modalities in different types of malocclusion is required.

The Effectiveness of Repetition or Multiplicity of Different Surgical and Non-Surgical Procedures Compared to a Single Procedure Application in Accelerating Orthodontic Tooth Movement: A Systematic Review and Meta-Analysis.

In this study, we aimed to assess the current scientific evidence concerning the effectiveness of combining two acceleration techniques or repeating an acceleration procedure in comparison with the single application in terms of the speed of the orthodontic tooth movement (OTM). We performed a comprehensive electronic search to retrieve relevant studies on 10 databases. Randomized controlled trials (RCTs) on fixed orthodontic treatment patients who received multiple types of acceleration techniques or underwent a repeated acceleration procedure compared to a single application were included. Version 2 of the Cochrane risk-of-bias tool for randomized trials (RoB 2) was used for assessing the risk of bias of retrieved studies. A total of six RCTs were included in this review. Regarding multiple acceleration methods, it seems that the combination of low-level laser therapy (LLLT) with a surgical technique outperforms the single application of each technique separately. Additionally, the combination of two surgical interventions may have a synergistic effect leading to reduced treatment time compared to the application of a single intervention. Regarding acceleration method repetition, it seems that the re-application of surgical procedures twice is more efficient than the single application. The meta-analysis showed a non-significant difference in the canine retraction rate between the four-weekly micro-osteoperforations (MOPs) (three times of applications) and both the eight-weekly MOPs (two times of applications) [mean difference (MD) = 0.24; 95% CI: -0.2-0.77; p = 0.36], as well as 12-weekly MOPs (two times of applications) (MD = 0.06; 95% CI: -0.14-0.27; p = 0.55). Based on very low evidence, combining two acceleration techniques is superior over a single application in accelerating tooth movement. Again, very low evidence suggests that the efficacy of repetition of surgical procedures twice and three times is similar. Further high-quality RCTs are required to assess the benefit of repeating an acceleration procedure or combining two different methods. In addition, more insight is needed into the possible side effects associated with the repetition or multiplicity of procedures.

Effect of Er:YAG laser-activated irrigation on dentine debris removal from different parts of the root canal system: An in vitro study.

BACKGROUND: There is insufficient information available in the literature about the efficacy of laser-activated irrigation (LAI) in removing dentine debris at different coronal-apical levels of the root canal system (RCS). OBJECTIVES: To evaluate the efficacy of erbium (LAI) in removing dentine debris from different coronal-apical levels of the RCS when compared to passive ultrasonic irrigation (PUI) and conventional irrigation (CI). MATERIAL AND METHODS: Forty-five single-rooted human teeth were split longitudinally into halves. In each sample, a standardized groove was cut 2-6 mm from the apex along the canal wall of the 1st half, and another standardized groove was cut 10-14 mm from the apex along the canal wall of the 2nd half. Each groove was filled with dentine debris mixed with sodium hypochlorite (NaOCl) 5.25%. The samples were assigned to 3 experimental groups according to the irrigant activation techniques (n = 15); (a) CI group, (b) PUI group and (c) LAI group. The amount of the remaining dentine debris was identified and scored using a stereomicroscope. RESULTS: Laser-activated irrigation removed significantly more debris than PUI and CI systems. The efficacy of dentine debris removal was not affected by the root canal third within all groups. CONCLUSIONS: Erbium LAI enhances dentine debris removal from the artificial irregularities in the RCS.