Lupin as Ingredient in Durum Wheat Breadmaking: Physicochemical Properties of Flour Blends and Bread Quality.

The popularity of adding pulse flours to baked goods is growing rapidly due to their recognised health benefits. In this study, increasing amounts (3, 7, 10, and 15%) of white lupin flour (Lupinus albus L.) and of protein concentrate from narrow-leaved lupin (Lupinus angustifolius L.) were used as replacements for durum wheat semolina to prepare bread, and their effects on the physicochemical properties of the flour blends, as well as the technological and sensory qualities of bread, were evaluated. The addition of protein concentrate from narrow-leaved lupin and white lupin flour increased the water binding capacity and the leavening rate compared to pure semolina. A farinograph test indicated that the dough development time had a slight but significant tendency to increase with the addition of lupin flour and protein concentrate of narrow-leaved lupin, while had a negative effect on the stability of dough. The alveograph strength decreased (225, 108, and 76 × 10-4 J for dough made with semolina, 15% of protein concentrate from narrow-leaved lupin, and 15% of white lupin flour, respectively), whereas there was an upward trend in the P/L ratio. Compared to re-milled semolina, the samples with lupin flour and protein concentrate from narrow-leaved lupin had low amylase activity, with falling number values ranging from 439 s to 566 s. The addition of the two different lupin flours lowered the specific volumes of the breads (2.85, 2.39, and 1.93 cm3/g for bread made from semolina, from 15% of protein concentrate from narrow-leaved lupin, and from 15% of white lupin flour, respectively) and increased their hardness values (up to 21.34 N in the bread with 15% of protein concentrate from narrow-leaved lupin). The porosity of the loaves was diminished with the addition of the two lupin flours (range of 5-8). The sensory analysis showed that the addition of white lupin flour or protein concentrate from narrow-leaved lupin did not impart any unpleasant flavours or odours to the bread. To conclude, the use of lupin in breadmaking requires adjustments to strengthen the gluten network but does not require a deflavouring process.

Artichoke Industrial Waste in Durum Wheat Bread: Effects of Two Different Preparation and Drying Methods of Flours and Evaluation of Quality Parameters during Short Storage.

'Violetto di Ramacca' is a local variety of artichoke grown in Sicily (Southern Italy), known for its purple color with green streaks. In this study, the effects of two different preparation and drying methods (method A, fresh sample oven-dried at 40 °C for 48 h then mixed and ground into flour; and B, minced and frozen sample oven-dried at 40 °C for 24 h then blended and ground into flour) for flours from different parts of the artichoke (bracts, stems, and mix), used at different percentages of integration (5, 7.5, and 10%), in combination with re-milled semolina, have been evaluated. The polyphenol contents of the flours produced with the two methods were measured. The results showed significant differences between the methods and samples, with a range from 9.09 mg GAE/g d.m. (bracts 100%, method A) to 2.62 mg/g (mix 100%, method B). The values were then lowered in the flour products with supplements ranging from 0.96 mg GAE/g (bract flour 10%, method A) to 0.11 mg GAE/g (mixed flour 7.5%, method B). As the amounts of polyphenols increased, the antioxidant activity increased, with a range that varied in the pure flour from 8.59 mg trolox eq/g d.m. (bract flour, method A) to 3.83 mg trolox eq/g d.m. (mixed flour, method B). These flours were also analyzed for color, highlighting a clear difference between methods A (greener) and B (browner). The flours thus obtained were used to produce breads, which were evaluated for their physicochemical characteristics during 4 days of storage. The results showed a reduction in volumes and heights, an increase in the percentage of integration of the artichoke flours, a greater quantity of moisture in the integrated breads, and a lower reduction in the structural characteristics during storage compared to the control breads. The TPA was conducted on the breads from T0 to T4, highlighting that, although initially more compact, the integrated breads offered less alteration of the values during storage. The aw ranged from 0.63 (mix flour 5%, method B) to 0.90 (bract flour 5%, method B). The amounts of polyphenols (from 0.57 mg GAE/g in bread with bracts at 10% (method A) to 0.13 mg GAE/g in bread with mix 5% (method B)) and the antioxidant activity (from 0.55 mg trolox eq/g d.m. in bread with bract flour 10% (method A) to 0.14% mg trolox eq/g d.m. in bread with mix flour) were also evaluated, showing a trend similar to the values obtained in the flours. Colorimetric tests highlighted a color more similar to wholemeal bread in the loaves produced with method B. Statistical factor analysis and cluster analysis were conducted for all trials.

Sicilian Rivet Wheat Landraces: Grain Characteristics and Technological Quality of Flour and Bread.

In recent years, the growth of tetraploid Sicilian wheat landraces has been arousing increasing interest. In this study, eighteen local genotypes of Triticum turgidum subsp. turgidum, belonging to the groups 'Bufala', 'Ciciredda', 'Bivona' and 'Paola', and two cultivars of Triticum turgidum subsp. durum (the old variety 'Bidì', and a more recent variety 'Simeto') were assessed for the characteristics of the grain and bread-making performance of their flours and doughs, as well as the quality of the loaves. The grain of the twenty genotypes came from a field trial conducted during 2018-2019 in south-eastern Sicily. The main commercial features of the grain (thousand kernel weight and hectolitre weight), including the defects (starchy, black pointed and shrunken kernels), were determined. The wholemeal flours and doughs obtained from the grain of each genotype were evaluated for the main technological quality (physico-chemical and rheological characteristics), and processed into loaves, whose main quality indices (volume, height, weight, moisture and porosity) were assessed. The results from such analyses allowed the authors to evaluate the genotypes' bread-making suitability. In particular, for the grain characteristics, hectolitre weight varied from 68.23 ('Bufala Rossa Lunga 01') to 77.43 ('Bidì 03') kg/hL, passing through the typical values for common and durum wheat. Among the grain defects, the black point defect was absent in all the grain samples, except for that of 'Bufala Nera Corta 01' (2%). Dry gluten content varied from 6.22 to 10.23 g/100 g, and sedimentation test values were low or medium-low, with values ranging from 22 to 35 mL. Amylase activity was low and highly variable among the genotypes, with the maximum value observed for 'Bufala Rossa Corta b01' (509 s). The doughs evidenced a poor quality for bread making with alveograph values of W ranging from 12 to 145 (10-4 × Joule) and thus the volume of the loaves varied from 346.25 cm3 of 'Bivona' and 'Ciciredda' to 415.00 cm3 of 'Bufala Rossa Lunga'. A Tandem Cluster Analysis was conducted on a set of all the response variables. The Hierarchical Cluster Analysis was initially run. A five-cluster solution identified three clusters further segmented and two single branches. Overall, the study highlighted the possibility of using some of these landraces alone for the production of traditional breads locally appreciated or together with other ingredients for the production of crumbly baked goods such as substitutes for bread and biscuits.

Durum Wheat Bread with a Potentially High Health Value through the Addition of Durum Wheat Thin Bran or Barley Flour.

The enrichment of semolina bread with prebiotic ingredients such as ß-glucans may exert health-promoting effects. This work presents the results of a general recipe development aimed at improving the nutritional value of bakery products. In this study, increasing amounts (0%, 2%, 5%, 7%, and 10%) of thin bran or barley flour were added into re-milled durum wheat semolina to prepare breads. The technological quality of doughs and breads was investigated. In general, the Farinograph water absorption of flour and dough stability increased with increasing inclusion levels of barley flour or thin bran (up to 73.23% and 18.75 min, respectively), contrarily to the increase of dough development time only in barley inclusion (4.55 min). At the same time, the softening index decreased for almost all of these, except for 2% of thin bran or barley flour inclusion. At Mixograph, mixing time increased (up to 5.13 min) whilst the peak height decreased. The specific volume and hardness of loaf differently decreased for almost all thesis (ranges 12.6-24.0% and 39.4-45.5%, respectively). The other quality parameters remained unchanged compared with semolina bread. After baking, ß-glucan levels increased differently at all the inclusion levels (2.35-fold, on average). The breadcrumb color was deep brown, while the crust became lighter in color. The breads contain ß-glucans even at low percentages of barley/bran inclusions while maintaining their technological performance. In conclusion, the results show an interesting potential of barley flour or thin bran as ingredients in breadmaking to increase the ß-glucans daily intake, but further investigations are needed to achieve improved quality features.

Waste from Artichoke Processing Industry: Reuse in Bread-Making and Evaluation of the Physico-Chemical Characteristics of the Final Product.

A relevant amount of waste is produced in the canning industry of globe artichoke. This study proposes to use flours of artichoke waste (stems and bracts) in durum wheat bread-making, replacing the re-milled durum wheat semolina at increasing levels (5, 7.5 and 10 g/100 g). No study had evaluated this type of enrichment in durum wheat bread, widespread in the same area where artichoke waste is mostly produced. The replacement had a visible effect on the flour color, increasing a* and reducing b* and L*, and this was reflected in the color of bread crumb. The water absorption determined by farinography, dough development time and dough stability increased as the level of replacement increased (up to 71.2 g/100 g, 7.3 min and 18.4 min, respectively). The mixograph peak height and mixing time increased compared to control. The alveograph W decreased, while the P/L ratio increased. The artichoke waste-enriched breads had a lower volume (as low as 1.37 cm3/g) and were harder than control, but they did not show relevant moisture losses during five days of storage. The obtained data show therefore an interesting potential of artichoke waste flours in bread-making, but further investigations are needed for achieving improved quality features.

Physico-chemical and multielemental traits of anaerobic digestate from Mediterranean agro-industrial wastes and assessment as fertiliser for citrus nurseries.

Previous researches have demonstrated the bioenergetic potential of agri-food Mediterranean wastes showing that anaerobic co-digestion is a valuable solution for Mediterranean areas. This implies a great interest for anaerobic digestates use in agriculture to replace fertilizers. The present study aimed at: i) producing knowledge on continuous anaerobic co-digestion of feedstock mixture composed by different Mediterranean agri-food wastes in terms of multielemental characterization and ii) assessing the agronomic value of industrial anaerobic digestate (AD) based on the potential as fertiliser in nursery condition for the citrus seedlings. Results have demonstrated that agro-industrial biomasses have great potentiality to be converted by anaerobic digestion in biofertilizer to be used in citrus nurseries as sustainable alternative to mineral fertilisers. Multielemental traits of the tested AD were valuable in terms of nutritional supply for the growth and development of the plant. AD was useful to replace the mineral fertilizers in terms of total N content (10.81 ± 0.32 %TS) and organic matter (43.32 ± 0.80 %TS). The seedlings nutritive status showed that no need for supplemental of nutrients was requested. Volkamer lemon highly benefited from the administration of liquid digestate, increasing the total chlorophyll level (2.97 ± 0.31 mg g-1 FW) presumably due to the higher ammonium content of the AD (59 ± 0.08 %TKN). Besides providing useful tools for citrus nurseries for conceiving new sustainable fertilization strategies, this study is a starting point for further in-depth works on physiological status and traits of citrus plants fertilized by using agro-industrial anaerobic digestate.

Development of Durum Wheat Breads Low in Sodium Using a Natural Low-Sodium Sea Salt.

Durum wheat is widespread in the Mediterranean area, mainly in southern Italy, where traditional durum wheat breadmaking is consolidated. Bread is often prepared by adding a lot of salt to the dough. However, evidence suggests that excessive salt in a diet is a disease risk factor. The aim of this work is to study the effect of a natural low-sodium sea salt (Saltwell®) on bread-quality parameters and shelf-life. Bread samples were prepared using different levels of traditional sea salt and Saltwell®. The loaves were packaged in modified atmosphere conditions (MAPs) and monitored over 90 days of storage. No significant differences (p ≤ 0.05) were found in specific volumes and bread yield between the breads and over storage times, regardless of the type and quantity of salt used. Textural data, however, showed some significant differences (p ≤ 0.01) between the breads and storage times. 5-hydroxymethylfurfural (HMF) is considered, nowadays, as an emerging ubiquitous processing contaminant; bread with the lowest level of Saltwell® had the lowest HMF content, and during storage, a decrease content was highlighted. Sensory data showed that the loaves had a similar rating (p ≤ 0.05) and differed only in salt content before storage. This study has found that durum wheat bread can make a nutritional claim of being "low in sodium" and "very low in sodium".

Screening of Durum Wheat (Triticum turgidum L. subsp. durum (Desf.) Husn.) Italian Cultivars for Susceptibility to Fusarium Head Blight Incited by Fusarium graminearum.

In 2009, a set of 35 cultivars of durum wheat (Triticum turgidum L. subsp. durum (Desf.) Husn.) of Italian origin was screened for fusarium head blight (FHB) susceptibility at CIMMYT (Mexico) and in the 2019-20 cropping season, 16 of these cultivars, which had been included in the Italian National Plant Variety Register, were tested again in southern and northern Italy. Wheat cultivars were artificially inoculated during anthesis with a conidial suspension of Fusarium graminearum sensu lato using a standard spray inoculation method. Inoculum was a mixture of mono-conidial isolates sourced in the same areas where the trials were performed. Isolates had been characterized on the basis of morphological characteristics and by DNA PCR amplification using a specific primer set and then selected for their virulence and ability to produce mycotoxins. The susceptibility to FHB was rated on the basis of the disease severity, disease incidence and FHB index. Almost all of the tested cultivars were susceptible or very susceptible to FHB with the only exception of "Duprì", "Tiziana" and "Dylan" which proved to be moderately susceptible. The susceptibility to FHB was inversely correlated with the plant height and flowering biology, the tall and the late heading cultivars being less susceptible.

Organo-mineral fertilisers from glass-matrix and organic biomasses: a new way to release nutrients. A novel approach to fertilisation based on plant demand.

BACKGROUND: A glass-matrix fertiliser (GMF), a by-product from ceramic industries, releases nutrients only in the presence of complexing solutions, similar to those exuded by plant roots. This ensures a slow release of nutrients over time, limiting the risk of their loss in the environment. With the aim to improve fertiliser performance, GMF was mixed with vine vinasse (DVV), pastazzo (a by-product of the citrus processing industry, PAS) or green compost (COMP) and nutrient release was evaluated by citric and chloridric acid extraction, at different concentrations. RESULTS: Theoretical and actual nutrients release were compared to evaluate possible synergistic effects due to the organic component added to the mineral fertiliser: phosphorus (+7.1%), K (+4.8%), Fe (+8.5%) and Zn (+5.5%) were released more efficiently by 2% citric acid from GMF + DVV, while Ca availability was increased (+5.3%) by 2% citric acid from GMF + PAS mixture. Both DVV and COMP increased by 12-18% the Fe release from GFM matrix. CONCLUSION: Organic biomasses added to GMF increased the release of some macro and micronutrients through an 'activation effect', which suggests the employment of these organo-mineral fertilisers also in short-cycle crops production. Moreover, the re-use of some agro-industrial organic residues gives another 'adding value' to this novel organo-mineral fertilfertilisers.