In vivo assessment of black seed oil single dose on prednisolone pharmacokinetics.

OBJECTIVES: To investigate the effect of blackseed oil (BSO) single dose on prednisolone pharmacokinetics via p-gp inhibition. METHODS: Three groups of rats (n = 5) were orally administered the vehicle, verapamil (50 mg/kg) or BSO (5 ml/kg) 15 min prior to prednisolone (5 mg/kg) administration. Blood samples were collected over 24 h and quantified. Non-compartmental analysis was employed to calculate maximum plasma concentration (Cmax), area under the curve (AUC0-last), time to reach Cmax (Tmax), apparent clearance (CL/F), and half-life (t1/2). Statistical significance was considered at p<0.05. RESULTS: Prednisolone Cmax and AUC0-last decreased by 65% and 25% in the BSO group compared to the negative control (P < .0001, .0029, respectively) while they increased by 1.75-folds and 8-folds in verapamil group (P < .0001). Tmax was achieved at 0.16, 0.5, and 0.25 h in the negative control, verapamil, and BSO-treated groups, respectively. CL/F in the treatment group was 1.3-fold and 10-fold higher compared to the negative and positive control, respectively, whereas the t1/2 remained comparable. CONCLUSION: Administration of BSO decreased prednisolone Cmax and AUC0-last in rats indicating that there is a herb-drug interaction; however, p-gp inhibition cannot be concluded. Patients relying on folk medicine in chronic illnesses treatment might need to avoid combining BSO with prednisolone.

Development and Evaluation of Solid Dispersion-Based Sublingual Films of Nisoldipine.

Nisoldipine (NIS) is a calcium channel blocker that exhibits poor bioavailability (~5%) due to low aqueous solubility and presystemic metabolism in the gut wall. In this context, the present work aimed to develop NIS solid dispersion (NISSD)-based sublingual films using solvent casting technique to improve the dissolution. Phase solubility studies indicated that Soluplus® was the most effective carrier for improving the aqueous solubility of NIS. NISSDs were initially developed using the solvent evaporation method. Fourier transform infrared spectrometric studies were found to display the characteristic vibrational bands related to C=O stretching and N-H deformation in NISSDs, proving the chemical integrity of the drug in NISSDs. Subsequently, bioadhesive sublingual films of NISSDs were formulated using solvent casting method, using hydroxypropyl methyl cellulose (HPMC) E5, E15, and hydroxy ethyl cellulose (HEC EF) as hydrophilic polymers and polyethylene glycol 400 (PEG 400) as plasticizer. The incorporation of NISSDs was found to produce clear films that displayed uniform content. The sublingual film of NISSDs composed of HPMC E5 (2% w/v), was found to display the least thickness (0.29 ± 0.02 mm), the highest folding endurance (168.66 ± 4.50 times), and good bioadhesion strength (12.73 ± 0.503 g/cm2). This film was found to rapidly disintegrate (28.66 ± 3.05 sec) and display near-complete drug release (94.24 ± 1.22) in 30 min. Incorporating NISSDs into rapidly bioadhesive sublingual films considerably improves drug dissolution. Overall, these research outcomes underscored the potential of rapidly dissolving bioadhesive sublingual films to evade gut metabolism and resolve the bioavailability issues associated with oral administration of NIS.

Niosomal Delivery of Celecoxib and Metformin for Targeted Breast Cancer Treatment.

Breast cancer continues to be a prominent worldwide health concern and requires continued investigation into innovative therapeutic approaches. Here, we report the first investigation into the therapeutic efficacy of combining Metformin (MET) and Celecoxib (CXB), both in free and niosomal form, for the treatment of breast cancer. Our investigation encompassed the characterization of these niosomal drug carriers, their stability assessment, and their effect on breast cancer cell models. The thin-film hydration technique was employed to prepare niosomes with spherical, uniform-size distributions and high encapsulation efficiencies. The niosomes were characterized by TEM, particle size analyzer, and ATR-FTIR. The niosomes with an average size of 110.6 ± 0.6 and 96.7 ± 0.7, respectively, for MET and CXB were stable when stored at 4 °C for three months with minimal drug leakage, minor changes in encapsulation efficiency and size, and unchanged physicochemical parameters. Evaluation in two-dimensional (2D) and three-dimensional (3D) viability assays demonstrated an increased cytotoxicity of encapsulated drugs when compared to their free-drug counterparts. Additionally, the combination of Metformin Niosomal Particles (MET NPs) and Celecoxib Niosomal Particles (CXB NPs) led to decreased cell viability in both 2D and 3D models compared to each drug administered individually. When comparing the effect of the niosomal versus the free combination of the drugs on cell migration, we found that both interventions effectively prevented cell migration. However, the efficacy of the niosomes' combination was not superior to that of the free drug combination (p < 0.05). In conclusion, the results of this study provide valuable insights into the potential application of combining MET and CXB nanoparticle delivery systems to breast cancer treatment. Exploring the in vivo application of this drug delivery system could open new avenues for more effective and targeted therapeutic approaches for breast cancer patients.

Solriamfetol impurities: Synthesis, characterization, and analytical method (UPLC-UV) validation.

Given that impurities may affect the quality and safety of drug products, impurity identification and profiling is an integral part of drug quality control and is particularly important for newly developed medications such as solriamfetol, which is used to treat excessive daytime sleepiness. Although the high-performance liquid chromatography analysis of commercial solriamfetol has revealed the presence of several impurities, their synthesis, structure elucidation, and chromatographic determination have not been reported yet. To bridge this gap, we herein identified, synthesized, and isolated eight process-related solriamfetol impurities, characterized them using spectroscopic and chromatographic techniques, and proposed plausible mechanisms of their formation. Moreover, we developed and validated a prompt impurity analysis method based on ultrahigh-performance liquid chromatography with UV detection, revealing that its selectivity, linearity, accuracy, precision, and quantitation limit meet the acceptance criteria of method validation stipulated by the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use. Thus, the developed method was concluded to be suitable for the routine analysis of solriamfetol substances.

Design and evaluation of in situ gel eye drops containing nanoparticles of Gemifloxacin Mesylate.

Traditional eye drops used for topically administering drugs have poor ocular bioavailability due to the biological barriers of the eye. There is an interest to design and develop novel drug delivery systems that would extend the precorneal residence time, reduce the frequency of administration and decrease dose-related toxicity. This study aimed to prepare Nanoparticles of Gemifloxacin Mesylate and incorporate them into an in situ gel. The nanoparticles were prepared by ionic gelation technique, using 32 factorial design. Sodium tripolyphosphate (STPP) was used to crosslink Chitosan. The optimized formulation of the nanoparticles (GF4) contained 0.15% Gemifloxacin Mesylate, 0.15% Chitosan and 0.20% STPP, producing 71 nm particle size and 81.11% entrapment efficiency. The prepared nanoparticles showed biphasic release, with an initial burst release of 15% in 1.0 hr and a cumulative drug release of 90.53% at the end of 24 hrs. After that, the prepared nanoparticles were incorporated into an in situ gel, using Poloxamer 407, producing a sustained drug release with efficient antimicrobial activity against gram-positive and gram-negative bacteria as confirmed by the cup plate method.

Formulation and Evaluation of Niosomal Alendronate Sodium Encapsulated in Polymeric Microneedles: In Vitro Studies, Stability Study and Cytotoxicity Study.

The aim of this study is to design and evaluate a transdermal delivery system for alendronate sodium (ALS) loaded with nanocarrier to improve its permeability and prolong its release. This is due to its low bioavailability, potential gastrointestinal side effects, and the special administration needed for the oral dosage form of ALS. When using the ether injection method, various niosomal formulations were produced. Size of the particles, polydispersity index (PDI), surface charge (ZP), drug entrapment efficiency (EE), and in vitro release were used to characterize the resulting niosomes. The size of niosomes ranged between 99.6 ± 0.9 and 464.3 ± 67.6 nm, and ZP was from −27.6 to −42.27 mV. The niosomal formulation was then loaded to aqueous polymer solution of 30% polyvinyl pyrrolidone (PVP) (MN-1), 30% PVP with 15% poly(vinyl alcohol) (PVA) (2:1) (MN-2), and 30% PVP with 15% PVA (1:1) (MN-3). The cumulative amount of ALS (Q) was in the following order: MN-1 > MN-2 > MN-3. All formulations in this study were stable at room temperature over two months, in terms of moisture content and drug content. In conclusion, a transdermal delivery of ALS niosomes combined in microneedles (MNs) was successfully prepared to provide sustained release of ALS.

Genome Similarities between Human-Derived and Mink-Derived SARS-CoV-2 Make Mink a Potential Reservoir of the Virus.

SARS-CoV-2 has RNA as the genome, which makes the virus more prone to mutations. Occasionally, mutations help a virus to cross the species barrier. SARS-CoV-2 infections in humans and minks (Neovison vison) are examples of zoonotic spillover. Many studies on the mutational analysis of human-derived SARS-CoV-2 have been published, but insight into the mink-derived SARS-CoV-2 genome of mutations is still required. Here, we performed a mutation analysis of the mink-derived SARS-CoV-2 genome sequences. We analyzed all available full-length mink-derived SARS-CoV-2 genome sequences on GISAID (214 genome sequences from the Netherlands and 133 genome sequences from Denmark). We found a striking resemblance between human-derived and mink-derived SARS-CoV-2. Our study showed that mutation patterns in the SARS-CoV-2 genome samples from the Netherlands and Denmark were different. Out of the 201 mutations we found, only 13 mutations were shared by the Netherlands' and Denmark's mink-derived samples. We found that six mutations were prevalent in the mink-derived SARS-CoV-2 genomes, and these six mutations are also known to be prevalent in human-derived SARS-CoV-2 variants. Our study reveals that the G27948T mutation in SARS-CoV-2 leads to truncation of ORF8, which was also reported in human-derived SARS-CoV-2, thus indicating that the virus can replicate without the full-length ORF8. These resemblances between mink-derived and human-derived SARS-CoV-2 enable the virus to cross the species barrier and suggest mink a potential reservoir for the virus.

Salting-out assisted liquid-liquid extraction coupled with high-performance liquid chromatography for the determination of vitamin D3 in milk samples.

In this study, salting-out assisted liquid-liquid extraction (SALLE) as a simple and efficient extraction technique followed by high-performance liquid chromatography (HPLC) was employed for the determination of vitamin D3 in milk samples. The sample treatment is based on the use of water-miscible acetonitrile as the extractant and acetonitrile phase separation under high-salt conditions. Under the optimum conditions, acetonitrile and ammonium sulfate were used as the extraction solvent and salting-out agent, respectively. The vitamin D3 extract was separated using Hypersil ODS (250x i.d 4.6 mm, 5 µm) HPLC column that was coupled with diode array detector. Vitamin D2 was used as internal standard (IS) to offset any variations in chromatographic conditions. The vitamin D3 and the IS were eluted in 18 min. Good linearity (r 2 > 0.99) was obtained within the range of 25-600 ng g-1 with the limit of detection of 15 ng g-1 and limit of quantification of 25 ng g-1. The validated method was applied for the determination of vitamin D3 in milk samples. The recoveries for spiked samples were from 94.4 to 113.5%.

Salting-out assisted liquid-liquid extraction coupled with hydrophilic interaction chromatography for the determination of biguanides in biological and environmental samples.

A new salting-out assisted liquid-liquid extraction (SALLE) sample preparation method for the determination of the polar anti-diabetic biguanide drugs (metformin, buformin and phenformin) in blood plasma, urine and lake water samples were developed. The SALLE was performed by mixing samples (plasma (0.2mL), urine or lake water (1.0mL)) with acetonitrile (0.4mL for plasma, 0.5mL for urine or lake water), sodium hydroxide powder was then added for the phase separation. The effects of type of salting-out reagent, type of extraction solvent, volumes of acetonitrile and sample, amount of sodium hydroxide, vortexing and centrifugation times on the extraction efficiency were investigated. The upper layer, containing the biguanides, was directly injected into a HPLC unit using ZIC-HILIC column (150mm×2.1mm×3.5µm) and was detected at 236nm. The method was validated and calibration curves were linear with r2>0.99 over the range of 20-2000µgL-1 for plasma and 5-2000µgL-1 for urine and lake water samples. The limits of detection were in the range (3.8-5.6)µgL-1, (0.8-1.5)µgL-1 and (0.3-0.8)µgL-1 for plasma, urine and lake water, respectively. The accuracies in the three matrices were within 87.3-103%, 87.4-109%, 82.2-109% of the nominal concentration for metformin, buformin and phenformin, respectively. The relative standard deviation for inter- and intra -day precision were in the range of 1.0-17% for all analytes in the three matrices.

Ion-pair vortex assisted liquid-liquid microextraction with back extraction coupled with high performance liquid chromatography-UV for the determination of metformin in plasma.

A new sample preparation method, ion-pair vortex assisted liquid-liquid microextraction (VALLME-BE), for the determination of a highly polar anti-diabetic drug (metformin) in plasma sample was developed. The VALLME-BE was performed by diluting the plasma in borate buffer and extracted to 150µL 1-octanol containing 0.2M di-(2-ethylhexyl)phosphoric acid as intermediate phase. The drug was next back-extracted into 20µL of 0.075M HCl solution. The effects of pH, ion-pair concentration, type of organic solvent, volume of extraction phases, ionic strength, vortexing and centrifugation times on the extraction efficiency were investigated. The optimum conditions were at pH 9.3, 60s vortexing and 2min centrifugation. The microextract, contained metformin and buformin (internal standard), was directly injected into a HPLC unit using C1 column (250mm×4.6mm×10µm) and detected at 235nm. The method was validated and calibration curve was linear with r2>0.99 over the range of 20-2000µgL-1. The limits of detection and quantitation were 1.4 and 4.1µgL-1, respectively. The accuracy was within 94.8-108% of the nominal concentration. The relative standard deviation for inter- and intra-day precision was less than 10.8%. The method was conveniently applied for the determination of metformin in plasma samples.