RESUMO
Recent advances in high-resolution biomedical imaging have improved cancer diagnosis, focusing on morphological, electrical, and biochemical properties of cells and tissues, scaling from cell clusters down to the molecular level. Multiscale imaging revealed high complexity that requires advanced data processing methods of multifractal analysis. We performed label-free multiscale imaging of surface potential variations in human ovarian cancer cells using Kelvin probe force microscopy (KPFM). An improvement in the differentiation between nonmalignant and cancerous cells by multifractal analysis using adaptive versus median threshold for image binarization was demonstrated. The results reveal the multifractality of cancer cells as a new biomarker for cancer diagnosis.
Assuntos
Eletricidade , Neoplasias , Humanos , Microscopia de Força Atômica/métodos , Neoplasias/diagnósticoRESUMO
Two-dimensional heterostructures have recently gained broad interest due to potential applications in optoelectronic devices. Their reduced dimensionality leads to novel physical effects beyond conventional bulk electronics. However, the optical properties of the 2D lateral heterojunctions have not been completely characterized due to the limited spatial resolution, requiring nano-optical techniques beyond the diffraction limit. Here, we investigate lateral monolayer WS2-MoS2 heterostructures in a plasmonic Au-Au tip-substrate picocavity using subdiffraction limited tip-enhanced photoluminescence (TEPL) spectroscopy with sub-nanometer tip-sample distance control. We observed more than 3 orders of magnitude PL enhancement by placing a plasmonic Au-coated tip at the resonantly excited heterojunction. We developed a theoretical model of the quantum plasmonic 2D heterojunction, where tunneling of hot electrons between the Au tip and MoS2 leads to the quenching of the MoS2 PL, while simultaneously increasing the WS2 PL, in contrast to the non-resonant reverse transfer. Our simulations show good agreement with the experiments, revealing a range of parameters and enhancement factors corresponding to the switching between the classical and quantum regimes. The controllable photoresponse of the 2D heterojunction can be used in novel nanodevices.
RESUMO
Ultraviolet (UV) irradiation-based methods used for viral inactivation have provided an important avenue targeting severe acute respiratory-syndrome coronavirus-2 (SARS-CoV-2) virus. A major problem with state-of-the-art UV inactivation technology is that it is based on UV lamps, which have limited efficiency, require high power, large doses, and long irradiation times. These drawbacks limit the use of UV lamps in air filtering systems and other applications. To address these limitations, herein we report on the fabrication of a device comprising a pulsed nanosecond 266 nm UV laser coupled to an integrating cavity (LIC) composed of a UV reflective material, polytetrafluoroethylene. Previous UV lamp inactivation cavities were based on polished walls with specular reflections, but the diffuse reflective UV ICs were not thoroughly explored for virus inactivation. Our results show that LIC device can inactivate several respiratory viruses including SARS-CoV-2, at ~ 1 ms effective irradiation time, with > 2 orders of magnitude higher efficiency compared to UV lamps. The demonstrated 3 orders of magnitude cavity enhancement relative to direct exposure is crucial for the development of efficient real-time UV air and water purification systems. To the best of our knowledge this is the first demonstration of LIC application for broad viral inactivation with high efficiency.
Assuntos
COVID-19 , Vírus , Desinfecção/métodos , Humanos , Lasers , SARS-CoV-2 , Raios Ultravioleta , Inativação de Vírus/efeitos da radiaçãoRESUMO
Two-dimensional transition metal dichalcogenides provide flexible platforms for nanophotonic engineering due to their exceptional mechanical and optoelectronic properties. For example, continuous band gap tunability has been achieved in 2D TMDs by elastic strain engineering. Localized elastic deformations in nanobubbles behave as "artificial atoms" with a spatially varying band gap resulting in funnelling of excitons and photocarriers. Here we present a new method of nanobubble fabrication in monolayer 2D lateral heterostructures using high temperature superacid treatment. We fabricated MoS2 and WS2 nanobubbles and performed near-field imaging with nanoscale resolution using tip-enhanced photoluminescence (TEPL) spectroscopy. TEPL nanoimaging revealed the coupling between MoS2 and WS2 nanobubbles with a large synergistic PL enhancement due to the plasmonic tip, hot electrons, and exciton funnelling. We investigated the contributions of different enhancement mechanisms, and developed a quantum plasmonic model, in good agreement with the experiments. Our work opens new avenues in exploration of novel nanophotonic coupling schemes.
RESUMO
Two-dimensional (2D) semiconducting materials have promising applications in flexible optoelectronics, nanophotonics, and sensing based on the broad tunability of their optical and electronic properties. 2D nanobubbles form exciton funnels due to localized strain that can be used as local emitters for information processing. Their nanoscale optical characterization requires the use of near-field scanning probe microscopy (SPM). However, previous near-field studies of 2D materials were performed on SiO2/Si and metallic substrates using the plasmonic gap mode to increase the signal-to-noise ratio. Another challenge is the deterministic control of bubble size and location. We addressed these challenges by investigating the photoluminescence (PL) signals of freestanding monolayer lateral WSe2-MoSe2 heterostructures under the influence of strain exerted by a plasmonic SPM tip. For first time, we performed tip-enhanced PL imaging of freestanding 2D materials and studied the competition between the PL enhancement mechanisms by nanoindentation as a function of the tip-sample distance. We observed the tunability of PL as a function of bubble size, which opens new possibilities to design optoelectronic nanodevices.
RESUMO
2D heterostructures made of transition metal dichalcogenides (TMD) have emerged as potential building blocks for new-generation 2D electronics due to their interesting physical properties at the interfaces. The bandgap, work function, and optical constants are composition dependent, and the spectrum of applications can be expanded by producing alloy-based heterostructures. Herein, the successful synthesis of monolayer and bilayer lateral heterostructures, based on ternary alloys of MoS2(1- x ) Se2 x -WS2(1- x ) Se2 x , is reported by modifying the ratio of the source precursors; the bandgaps of both materials in the heterostructure are continuously tuned in the entire range of chalcogen compositions. Raman and photoluminescence (PL) spatial maps show good intradomain composition homogeneity. Kelvin probe measurements in different heterostructures reveal composition-dependent band alignments, which can further be affected by unintentional electronic doping during the growth. The fabrication of sequential multijunction lateral heterostructures with three layers of thickness, composed of quaternary and ternary alloys, is also reported. These results greatly expand the available tools kit for optoelectronic applications in the 2D realm.
RESUMO
Chocolate bloom is an off-white coating on the surface of chocolate products due to the altered distribution of the ingredients. Bloom reduces the shelf-life of chocolate and affects its visual and tactile quality, all of which are serious concerns for chocolate manufacturers and consumers. The automated, rapid, and noninvasive point-of-care detection of chocolate bloom has been an essential but challenging problem. The ability to detect and characterize chocolate bloom using portable laser spectroscopy could be used to develop in-situ quality control sensors. In this work, a handheld Raman spectrometer was used to detect chocolate bloom. Raman spectra acquired from bloomed HERSHEY'S milk chocolate, Hawaiian Host milk chocolate covered macadamia nuts, and Babayevsky Russian dark chocolate were used to characterize the type of bloom. The 1064 nm laser beam of the handheld Raman instrument was used to partially remove the fat bloom of the dark chocolate and to induce sugar bloom on the milk chocolate. The handheld Raman approach has a high potential for industrial and consumer applications for the on-site chemical analysis of chocolate bloom and as an alternative laser-based chocolate decoration.
RESUMO
Optical spectroscopic imaging of biological systems has important applications in medical diagnosis, biochemistry, and image-guided surgery. Vibrational spectroscopy, such as Raman scattering, provides high chemical selectivity but is limited by weak signals and a large fluorescence background. Fluorescence imaging is often used by introducing specific dyes in biological systems to label different system parts and to increase the image contrast. However, the extrinsic fluorescence of the staining molecules often masks the intrinsic vibrational signals of biomolecules, which could also be simultaneously detected using the same excitation laser source. Therefore, fluorescence staining is often accompanied by the loss of other important complimentary information. For example, the high laser power often used for the rapid, high-quality imaging could lead to photo-induced suppression or bleaching of the fluorescence and Raman signals resulting in sample photodamage. Therefore, simultaneous imaging and photodamage analysis need to be performed in a controlled bioimaging experiment. Here we perform simultaneous spectroscopic bioimaging and photostability analysis of rhodamine 6G (R6G) stained red blood cells (RBCs) using both fluorescence and resonance Raman imaging in a single 532 nm laser excitation experiment. We develop a corresponding data processing algorithm which allows separation of the two spectroscopic signals. We control the relative intensity of the R6G and RBC signals by varying the excitation laser power and simultaneously monitor the photostability of RBCs. We observe no significant photodamage of RBCs through the absence of changes in the relative Raman peak intensities. Conversely, the R6G molecules show bleaching with the suppression of both the fluorescence and resonance Raman signals. Our approach may be generalized to other types of stained cells with the appropriate selection of fluorescent dyes and excitation sources.