Encapsulation of ascorbyl palmitate in corn starch matrix by extrusion cooking: Release behavior and antioxidant activity.

The main limitation associated with the oral delivery of ascorbyl palmitate, a potent food antioxidant, is its susceptibility to oxidative deterioration. The main objective of the current research was to encapsulate ascorbyl palmitate into corn starch matrix using extrusion cooking and evaluate its release behavior and oxidative stability. Results showed that ascorbyl palmitate was efficiently encapsulated (96.06-99.28%) in the starch matrix using the extrusion technique. The release behavior of ascorbyl palmitate from the extruded starch matrix during simulated upper gastrointestinal tract conditions was slow but steady (18.92-28.32% after 180 min) and presented a sustainable antioxidant activity. Acid treatment (pH 2.0) increased the release rate of ascorbyl palmitate from the extruded starch matrix. Furthermore, the antioxidant capacity of ascorbyl palmitate released from the extruded samples stored in both darkness and under UV radiation at 40 °C was found to be remarkably retained (p > 0.05) for up to three months.

Development of hemp seed oil nanoemulsions loaded with ascorbyl palmitate: Effect of operational parameters, emulsifiers, and wall materials.

The perceived health properties of hemp seed oil, as one of the few plant-basedsources of omega-3 and omega-6 fatty acids with an ideal ratio of 1:3, suggest its incorporation in food-grade emulsions to improve its water solubility and oxidative stability. The current research's main aim was nanoemulsification of hemp seed oil using the oil-in-water emulsification method followed by ultrasonication. The entrapment efficiency of the nanoemulsions for antioxidant ascorbyl palmitate and its impact on oxidative stability of the oil was also evaluated. Gum arabic: maltodextrin in 75:25 ratio could result in nanoemulsion with entrapment efficiency of 97.10 % for ascorbyl palmitate and radical scavenging activity of oil-soluble bioactives of 92.13 %. Moreover, incorporation of ascorbyl palmitate could effectively retard the oxidation, specifically in nanoemulsions containing gum Arabic. The optimum formulation of nanoemulsion having an average droplet size of 293 nm can be applied as an ideal vegetarian source of omega-3 fatty acids.

Extraction of lycopene using a lecithin-based olive oil microemulsion.

Incorporation of many water-insoluble nutraceuticals into aqueous formulations can present a real challenge for food industry. Hence, establishment of novel technologies for concurrent extraction and solubilisation of lipophilic compounds might be of a great interest. The main objective of the present study was to prepare olive oil microemulsions using different proportions of lecithin, 1-propanol, olive oil and water to examine their abilities to form microemulsion as well as extraction of lycopene from industrial tomato pomace. Lycopene extraction using 1 g tomato pomace and 4 extraction cycles applying 5 g microemulsion composed of lecithin: 1-propanol: olive oil: water (53.33:26.67:10:10 wt%) resulted in the highest extraction efficiency (88%). Such biocompatible and food-grade microemulsion containing lycopene can be applied in many food formulations where it can present a good solubility in aqueous and non-polar media and can improve the health-promoting properties of both lycopene and olive oil.

Stability assessment of lycopene microemulsion prepared using tomato industrial waste against various processing conditions.

BACKGROUND: Green separation techniques are growing at a greater rate than solvent extraction as a result of the constant consumer drive to 'go natural'. Considering the increasing evidence of the health benefits of lycopene and massive tomato industrial waste, in the present study, lycopene was extracted from tomato industrial waste using microemulsion technique and its mean droplet size and size distribution was determined. Moreover, the effects of pasteurization, sterilization, freeze-thaw cycles and ultraviolet (UV) irradiation on the thermodynamic stability, turbidity and lycopene concentration of the lycopene microemulsion were monitored. RESULTS: Freeze-thaw cycles, pasteurization and short exposure to UV irradiation showed no or negligible influence on lycopene content and turbidity of the microemulsion. However, long exposure to UV (260 min) reduced the lycopene content and turbidity by 34% and 10%, respectively. HHST (higher-heat shorter-time) and sterilization also reduced lycopene content (25%) and increased turbidity (32%). CONCLUSION: The lycopene microemulsion showed satisfactory stability over a process where its monodispersity and nanosize could be of potential advantage to the food and related industries. Regarding the carcinogenicity of synthetic colourants, potential applications of the lycopene microemulsion include in soft drinks and minced meat, which would result in a better colour and well-documented health-promoting qualities. © 2017 Society of Chemical Industry.

Microemulsion-based lycopene extraction: Effect of surfactants, co-surfactants and pretreatments.

Lycopene is a potent antioxidant that has received extensive attention recently. Due to the challenges encountered with current methods of lycopene extraction using hazardous solvents, industry calls for a greener, safer and more efficient process. The main purpose of present study was application of microemulsion technique to extract lycopene from tomato pomace. In this respect, the effect of eight different surfactants, four different co-surfactants, and ultrasound and enzyme pretreatments on lycopene extraction efficiency was examined. Experimental results revealed that application of combined ultrasound and enzyme pretreatments, saponin as a natural surfactant, and glycerol as a co-surfactant, in the bicontinuous region of microemulsion was the optimal experimental conditions resulting in a microemulsion containing 409.68±0.68 µg/glycopene. The high lycopene concentration achieved, indicates that microemulsion technique, using a low-cost natural surfactant could be promising for a simple and safe separation of lycopene from tomato pomace and possibly from tomato industrial wastes.

Selective enumeration of probiotic microorganisms in cheese.

Cheese is a dairy product which has a good potential for delivery of probiotic microorganisms into the human intestine. To be considered to offer probiotic health benefits, probiotics must remain viable in food products above a threshold level (e.g., 10(6) cfu g(-1)) until the time of consumption. In order to ensure that a minimal number of probiotic bacteria is present in the cheese, reliable methods for enumeration are required. The choice of culture medium for selective enumeration of probiotic strains in combination with starters depends on the product matrix, the target group and the taxonomic diversity of the bacterial background flora in the product. Enumeration protocol should be designed as a function of the target microorganism(s) to be quantified in the cheese. An overview of some series of culture media for selective enumeration of commercial probiotic cultures is presented in this review.