Highly selective and sensitive detection of glutamate by an electrochemical aptasensor.

An electrochemical aptamer-based sensor was developed for glutamate, the major excitatory neurotransmitter in the central nervous system. Determining glutamic acid release and glutamic acid levels is crucial for studying signal transmission and for diagnosing pathological conditions in the brain. Glutamic acid-selective oligonucleotides were isolated from an ssDNA library using the Capture-SELEX protocol in complex medium. The selection permitted the isolation of an aptamer 1d04 with a dissociation constant of 12 µM. The aptamer sequence was further used in the development of an electrochemical aptamer sensor. For this purpose, a truncated aptamer sequence named glu1 was labelled with a ferrocene redox tag at the 3'-end and immobilized on a gold electrode surface via Au-thiol bonds. Using 6-mercapto-1-hexanol as the backfill, the sensor performance was characterized by alternating current voltammetry. The glu1 aptasensor showed a limit of detection of 0.0013 pM, a wide detection range between 0.01 pM and 1 nM, and good selectivity for glutamate in tenfold diluted human serum. With this enzyme-free aptasensor, the highly selective and sensitive detection of glutamate was demonstrated, which possesses great potential for implementation in microelectrodes and for in vitro as well as in vivo monitoring of neurotransmitter release.

Logic Gates Based on DNA Aptamers.

DNA bio-computing is an emerging trend in modern science that is based on interactions among biomolecules. Special types of DNAs are aptamers that are capable of selectively forming complexes with target compounds. This review is devoted to a discussion of logic gates based on aptamers for the purposes of medicine and analytical chemistry. The review considers different approaches to the creation of logic gates and identifies the general algorithms of their creation, as well as describes the methods of obtaining an output signal which can be divided into optical and electrochemical. Aptameric logic gates based on DNA origami and DNA nanorobots are also shown. The information presented in this article can be useful when creating new logic gates using existing aptamers and aptamers that will be selected in the future.

Selection, Characterization, and Application of ssDNA Aptamer against Furaneol.

Furaneol is an aroma compound which occurs naturally in foods and is used as an artificial flavor. Detection of furaneol is required in food science and food processing industry. Capture- Systematic Evolution of Ligands by EXponential enrichment (SELEX) protocol was applied for the isolation of an aptamer binding to furaneol, a small volatile organic substance contributing to the flavor of various products. Thirteen cycles of selection were performed. The resulting DNA pool was cloned, using blunt-end cloning, and ninety-six plasmids were sequenced and analyzed. Eight oligonucleotides were selected as aptamer candidates and screened for the ability to bind to furaneol, using three different methods-magnetic-beads associated elution assay, SYBR Green I assay, and exonuclease protection assay. One of the candidates was further characterized as an aptamer. The apparent equilibrium constant was determined to be (1.1 ± 0.4) µM, by the fluorescent method. The reported aptamer was applied for development of the ion-sensitive field-effect transistor (ISFET)-based biosensor, for the analysis of furaneol, in the concentration range of 0.1⁻10 µM.

Amplified Detection of the Aptamer-Vanillin Complex with the Use of Bsm DNA Polymerase.

The electrochemical detection of interactions between aptamers and low-molecular-weight targets often lacks sensitivity. Signal amplification improves the detection of the aptamer-analyte complex; Bsm DNA polymerase was used to amplify the signal from the interaction of vanillin and its aptamer named Van_74 on an ion-sensitive field-effect transistor (ISFET)-based biosensor. The aptamer was immobilized on the ISFET sensitive surface. A short DNA probe was hybridized with the aptamer and dissociated from it upon vanillin addition. A free probe interacted with a special DNA molecular beacon initiated the Bsm DNA polymerase reaction that was detected by ISFET. A buffer solution suitable for both aptamer action and Bsm DNA polymerase activity was determined. The ISFET was shown to detect the Bsm DNA polymerase reaction under the selected conditions. Vanillin at different concentrations (1 × 10-6-1 × 10-8 M) was detected using the biosensor with signal amplification. The developed detection system allowed for the determination of vanillin, starting at a 10-8 M concentration. Application of the Bsm DNA polymerase resulted in a 15.5 times lower LoD when compared to the biosensor without signal amplification (10.1007/s00604-017-2586-4).

Field-effect transition sensor for KI detection based on self-assembled calixtube monolayers.

A series of novel calixarene-based tubes comprising different numbers of silatrane anchoring groups was synthesized. For the first time, a self-assembled monolayer (SAM) derived from calixtubes was formed on a SiO2 surface. The formation of the SAM was confirmed by X-ray photoelectron spectroscopy, scanning electron microscopy-energy dispersive X-ray analysis, and contact angle measurements. Modification of the sensitive surface of a conventional ion-selective field effect transistor (ISFET) with the afforded SAM resulted in the production of a KI-sensitive sensor. This sensor selectively determined KI compare to different alkali metal iodides: NaI, RbI, CsI; also investigation of different potassium salts (acetate, iodide, nitrate, chloride, dihydrophosphate, perchlorate) showed the highest response to KI. This sensor was successfully employed to determine the presence of KI in artificial saliva with a limit of detection of ~3 × 10-8 М. In addition, it was found that the detection limit of the sensor could be increased by combining the sensor with a microfluidic system. Due to the obtained sensor sensitivity and its ability to detect KI in artificial saliva, we could conclude that this sensor shows great potential for application in the determination of KI in different media, such as the human body and in biological liquids, such as saliva or urine.

Extensive hydrolysis of phosphonates as unexpected behaviour of the known His6-organophosphorus hydrolase.

The catalytic activity of hexahistidine-tagged organophosphorus hydrolase (His6-OPH) in hydrolytic reactions of methylphosphonic acid (MPA) and its monoesters and diesters being decomposition products of R-VX was demonstrated for the first time. The catalytic constants of enzyme in such reactions were determined. The mechanism of C-P bond cleavage in the MPA by His6-OPH was proposed. Such reaction was estimated to be carried out with the soluble and nanocapsulated forms of His6-OPH. His6-OPH was demonstrated to be capable of degrading the key organophosphorus components of reaction masses (RMs) that are produced by the chemical detoxification of R-VX and RMs are multi-substrate mixtures for this enzyme. The kinetic model describing the behaviour of His6-OPH in RMs was proposed and was shown to adequately fit experimental points during degradation of the real samples of RMs.