Pervaporation and Gas Separation Properties of High-Molecular Ladder-like Polyphenylsilsesquioxanes.

This paper presents the results of studies on the pervaporation properties (for benzene/hexane mixtures) and gas permeability (for He, H2, N2, O2, CO2, CH4, C2H6, and C4H10) of ladder-like polyphenylsesquioxanes (L-PPSQ) with improved physical and chemical properties. These polymers were obtained by condensation of cis-tetraphenylcyclotetrasiloxanetetraol in ammonia medium. The structure of L-PPSQ was fully confirmed by a combination of physicochemical analysis methods: 1H, 29Si NMR, IR spectroscopy, HPLC, powder XRD, and viscometry in solution. For the first time, a high molecular weight of the polymer (Mn = 238 kDa, Mw = 540 kDa) was achieved, which determines its improved mechanical properties and high potential for use in membrane separation. Using TGA and mechanical analysis methods, it was found that this polymer has high thermal (Td5% = 537 °C) and thermal-oxidative stability (Td5% = 587 °C) and good mechanical properties (Young's module (E) = 1700 MPa, ultimate tensile stress (σ) = 44 MPa, elongation at break (ε) = 6%), which is important for making membranes workable under various conditions. The polymer showed a high separation factor for a mixture of 10% wt. benzene in n-hexane (126) at a benzene flow of 33 g/(m2h).

Ladder Polyphenylsilsesquioxanes and Their Niobium-Siloxane Composite as Coating Materials: Spectroscopy and Atomic Oxygen Resistance Study.

In order to expand the range of materials that can be used in outer space and in development of small spacecraft, ladder polyphenylsilsesquioxanes with different molar weights and the Nb-siloxane composites based on them were studied. The properties of the polymer films were studied, including tests in an oxygen plasma flow. Both initial and filled ladder polymers feature extremely low erosion coefficients in the region of 10-26 cm3/atom O at a high fluence of atomic oxygen of 1.0 × 1021 atom O/cm2. Ladder polyphenylsilsesquioxane films irradiated with atomic oxygen (AO) retain their integrity, do not crack, and exhibit good optical properties, in particular, a high transmittance. The latter slightly decreases during AO exposure. The Nb-siloxane filling retains the AO resistance and slight decrease in optical transmission due to diffuse scattering on the formed Nb-[(SiO)x] nanoparticles. Ladder polyphenylsilsesquioxanes demonstrate their suitability for creating protective, optically transparent coatings for small spacecraft that are resistant to the erosive effects of incoming oxygen plasma.

Tetrachromophoric Derivatives of Dibenzoylmethanatoboron Difluoride Based on Stereoregular Cyclotetrasiloxanes: Synthesis and Properties.

A series of new tetrachromophoric systems based on stereoregular tetracyclosiloxanes and dibenzoylmethanatoboron difluoride derivatives have been synthesized and characterized by a complex of physicochemical methods. The photophysical properties of the synthesized compounds are studied by electronic absorption, steady-state, and time-resolved fluorescence spectroscopy. In the synthesized compounds, four dibenzoylmethanatoboron difluoride (DBMBF2)-based fluorophores are in an all-cis arrangement with respect to a cyclotetrasiloxane scaffold. DFT calculations predict that they can form H-type dimers, trimers, or tetramers with an antiparallel orientation of their ground-state dipole moments. Under UV excitation, solutions of these compounds in polar and nonpolar solvents exhibit complex fluorescence consisting of monomer- and excimer-like emissions with different lifetimes. Global fitting analysis reveals the presence of at least four kinetically distinguishable species in the excited state. The studied compounds in solutions have CIE chromaticity coordinates very close to the white color point and are promising objects for the development of next-generation single-emission materials for white illumination.

Synthesis of Siloxane Derivatives of Phenylboronic Acids of Different Structures.

The synthesis of a storage-stable organosilicon modifier with a dioxaborolane-protecting group is described. Its high reactivity and selective anti-Markovnikov addition in hydrosilylation reactions to afford siloxanes of various structures are shown. The possibility of deprotection of both the initial modifier and its siloxane derivatives under mild conditions using water in yields up to 96% is demonstrated. The existence of an equilibrium between the organosilicon derivatives of phenylboronic acids and their cyclic six-membered boroxines was confirmed by 1H NMR spectroscopy and X-ray diffraction analysis data. The use of siloxane derivatives of phenylboronic acids in Suzuki-Miyaura and Chan-Lam cross-coupling reactions was studied. All synthesized compounds were characterized by NMR (1H, 11B, 13C, and 29Si), IR spectroscopy, and high-resolution mass spectrometry.

The Use of the Thiol-Ene Addition Click Reaction in the Chemistry of Organosilicon Compounds: An Alternative or a Supplement to the Classical Hydrosilylation?

This review presents the main achievements in the use of the thiol-ene reaction in the chemistry of silicones. Works are considered, starting from monomers and ending with materials.The main advantages and disadvantages of this reaction are demonstrated using various examples. A critical analysis of the use of this reaction is made in comparison with the hydrosilylation reaction.

Star-Shaped Polydimethylsiloxanes with Organocyclotetrasilsesquioxane Branching-Out Centers: Synthesis and Properties.

New non-crystallizable low-dispersity star-shaped polydimethylsiloxanes (PDMS) containing stereoregular cis-tetra(organo)(dimethylsiloxy)cyclotetrasiloxanes containing methyl-, tolyl- and phenyl-substituents at silicon atoms and the mixture of four stereoisomers of tetra[phenyl(dimethylsiloxy)]cyclotetrasiloxane as the cores were synthesized. Their thermal and viscous properties were studied. All synthesized compounds were characterized by a complex of physicochemical analysis methods: nuclear magnetic resonance (NMR), FT-IR spectroscopy, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), viscometry in solution, rheometry, and Langmuir trough study.

A Versatile Equilibrium Method for the Synthesis of High-Strength, Ladder-like Polyphenylsilsesquioxanes with Finely Tunable Molecular Parameters.

A versatile equilibrium method for synthesizing ladder-like polyphenylsilsesquioxanes (L-PPSQs) with various molecular weights (from 4 to 500 kDa) in liquid ammonia was developed. The effect of diverse parameters, such as temperature, monomer concentration, reaction time, addition or removal of water from the reaction medium, on the polycondensation process was determined. The molecular weight characteristics and structure of the L-PPSQ elements obtained were determined by GPC, 1H, 29Si NMR, IR spectroscopy, viscometry, and PXRD methods. The physicochemical properties of L-PPSQs were determined by TGA and mechanical analyses.

One-dimensional van der Waals heterostructures: Growth mechanism and handedness correlation revealed by nondestructive TEM.

We recently synthesized one-dimensional (1D) van der Waals heterostructures in which different atomic layers (e.g., boron nitride or molybdenum disulfide) seamlessly wrap around a single-walled carbon nanotube (SWCNT) and form a coaxial, crystalized heteronanotube. The growth process of 1D heterostructure is unconventional-different crystals need to nucleate on a highly curved surface and extend nanotubes shell by shell-so understanding the formation mechanism is of fundamental research interest. In this work, we perform a follow-up and comprehensive study on the structural details and formation mechanism of chemical vapor deposition (CVD)-synthesized 1D heterostructures. Edge structures, nucleation sites, and crystal epitaxial relationships are clearly revealed using transmission electron microscopy (TEM). This is achieved by the direct synthesis of heteronanotubes on a CVD-compatible Si/SiO2 TEM grid, which enabled a transfer-free and nondestructive access to many intrinsic structural details. In particular, we have distinguished different-shaped boron nitride nanotube (BNNT) edges, which are confirmed by electron diffraction at the same location to be strictly associated with its own chiral angle and polarity. We also demonstrate the importance of surface cleanness and isolation for the formation of perfect 1D heterostructures. Furthermore, we elucidate the handedness correlation between the SWCNT template and BNNT crystals. This work not only provides an in-depth understanding of this 1D heterostructure material group but also, in a more general perspective, serves as an interesting investigation on crystal growth on highly curved (radius of a couple of nanometers) atomic substrates.

Photoluminescence from Single-Walled MoS2 Nanotubes Coaxially Grown on Boron Nitride Nanotubes.

Single-walled and multiwalled molybdenum disulfide (MoS2) nanotubes have been coaxially synthesized on small-diameter boron nitride nanotubes (BNNTs) that are obtained from removing single-walled carbon nanotubes (SWCNTs) in heteronanotubes of SWCNTs coated by BNNTs. The photoluminescence (PL) from single-walled MoS2 nanotubes supported by core BNNTs is observed in this work, which evidences the direct bandgap structure of single-walled MoS2 nanotubes with a diameter around 6-7 nm. The observation is consistent with our DFT results that the single-walled MoS2 nanotube changes from an indirect-gap to a direct-gap semiconductor when the diameter of a nanotube is more than around 5.2 nm. On the other hand, when there are SWCNTs inside the heteronanotubes of BNNTs and single-walled MoS2 nanotubes, the PL signal from MoS2 nanotubes is considerably quenched. The charge transfer and energy transfer between SWCNTs and single-walled MoS2 nanotubes were examined through characterizations by PL, X-ray photoelectron spectroscopy, and Raman spectroscopy. Moreover, the PL signal from multiwalled MoS2 nanotubes is significantly quenched. Single-walled and multiwalled MoS2 nanotubes exhibit different Raman features in both resonant and nonresonant Raman spectra.

Phenomenological model of thermal transport in carbon nanotube and hetero-nanotube films.

The thermal properties of individual single-walled carbon nanotubes (SWCNTs) have been well documented in the literature following decades of intensive study. However, when SWCNTs form a macroscale assembly, the thermal transport in these complex structures usually not only depends on the properties of the individual tubes, but also is affected and sometimes dominated by inner structural details, e.g. bundles and junctions. In this work, we first performed an experimental measurement of the thermal conductivities of individual SWCNT bundles of different sizes using a suspended micro-thermometer. The results, together with the data that we obtained from a previous work, give a complete experimental understanding of the effect of bundling on the thermal conductivity of SWCNTs. With these quantitative understandings, we propose a phenomenological model to describe the thermal transport in two-dimensional (2D) SWCNT films. The term 'line density' is defined to describe the effective thermal transport channels in this complex 2D network. Along with experimentally obtained geometric statistics and film transparency, the thermal conductance of SWCNTs is estimated, and the effects of bundle length, diameter, and contact conductance are systematically discussed. Finally, we extend this model to explain thermal transport in 2D networks of one-dimensional van der Waals heterostructures, which are coaxial hetero-nanotubes we recently synthesized using SWCNTs as the template. This extended model suggests that the contribution of boron nitride nanotubes (BNNTs) to the overall performance of a SWCNT-BNNT heterostructured film depends on the transparency of the original SWCNT film. The increase in the thermal conductance of a highly transparent film is estimated to be larger than that of a less transparent film, which shows a good agreement with our experimental observations and proves the validity of the proposed phenomenological model.

Ultrafast saturable absorption of large-diameter single-walled carbon nanotubes for passive mode locking in the mid-infrared.

We study the saturable absorption properties of single-walled carbon nanotubes (SWCNTs) with a large diameter of 2.2 nm and the corresponding exciton resonance at a wavelength of 2.4 µm. At resonant excitation, a large modulation depth of approximately 30 % and a small saturation fluence of a few tens of µJ/cm2 are evaluated. The temporal response is characterized by an instantaneous rise and a subpicosecond recovery. We also utilize the SWCNTs to realize sub-50 fs, self-start mode locking in a Cr:ZnS laser, revealing that the film thickness is an important parameter that affects the possible pulse energy and duration. The results prove that semiconductor SWCNTs with tailored diameters exceeding 2 nm are useful for passive mode locking in the mid-infrared range.

Enhanced In-Plane Thermal Conductance of Thin Films Composed of Coaxially Combined Single-Walled Carbon Nanotubes and Boron Nitride Nanotubes.

Carbon nanotubes (CNTs) and boron nitride nanotubes (BNNTs) are one-dimensional materials with high thermal conductivity and similar crystal structures. Additionally, BNNTs feature higher thermal stability in air than CNTs. In this work, a single-walled carbon nanotube (SWCNT) film was used as a template to synthesize a BNNT coating by the chemical vapor deposition (CVD) method to form a coaxial heterostructure. Then, a contact-free steady-state infrared (IR) method was adopted to measure the in-plane sheet thermal conductance of the as-synthesized film. The heterostructured SWCNT-BNNT film demonstrates an enhanced sheet thermal conductance compared with the bare SWCNT film. The increase in sheet thermal conductance shows a reverse relationship with SWCNT film transparency. An enhancement of over 80% (from ∼3.6 to ∼6.4 µW·K-1·sq-1) is attained when the BNNT coating is applied to an SWCNT film with a transparency of 87%. This increase is achieved by BNNTs serving as an additional thermal conducting path. The relationship between the thermal conductance increase and transparency of the SWCNT film is studied by a structured modeling of the SWCNT film. We also discuss the effect of annealing on the thermal conductance of SWCNTs before BNNT growth. Along with the preservation of high electrical conductance, the enhanced thermal conductance of the heterostructured SWCNT-BNNT films makes them a promising building block for thermal and optoelectronic applications.

Organoboron Derivatives of Stereoregular Phenylcyclosilsesquioxanes.

This study presents the synthesis of organoboron derivatives of stereoregular 4-, 6-, and 12-unit phenylcyclosilsesquioxanes. All compounds obtained were isolated in good yields (70-80 %) and were fully characterized by 1 H, 13 C, 29 Si, 11 B NMR, IR spectroscopy, HRMS ESI, and elemental microanalysis. The structure of the key modifier, obtained for the first time, 4-(tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl) dimethylvinylsilane, was also confirmed by single-crystal XRD.

Ultrafast Optoelectronic Processes in 1D Radial van der Waals Heterostructures: Carbon, Boron Nitride, and MoS2 Nanotubes with Coexisting Excitons and Highly Mobile Charges.

Heterostructures built from 2D, atomically thin crystals are bound by the van der Waals force and exhibit unique optoelectronic properties. Here, we report the structure, composition and optoelectronic properties of 1D van der Waals heterostructures comprising carbon nanotubes wrapped by atomically thin nanotubes of boron nitride and molybdenum disulfide (MoS2). The high quality of the composite was directly made evident on the atomic scale by transmission electron microscopy, and on the macroscopic scale by a study of the heterostructure's equilibrium and ultrafast optoelectronics. Ultrafast pump-probe spectroscopy across the visible and terahertz frequency ranges identified that, in the MoS2 nanotubes, excitons coexisted with a prominent population of free charges. The electron mobility was comparable to that found in high-quality atomically thin crystals. The high mobility of the MoS2 nanotubes highlights the potential of 1D van der Waals heterostructures for nanoscale optoelectronic devices.

One-dimensional van der Waals heterostructures.

We present the experimental synthesis of one-dimensional (1D) van der Waals heterostructures, a class of materials where different atomic layers are coaxially stacked. We demonstrate the growth of single-crystal layers of hexagonal boron nitride (BN) and molybdenum disulfide (MoS2) crystals on single-walled carbon nanotubes (SWCNTs). For the latter, larger-diameter nanotubes that overcome strain effect were more readily synthesized. We also report a 5-nanometer-diameter heterostructure consisting of an inner SWCNT, a middle three-layer BN nanotube, and an outer MoS2 nanotube. Electron diffraction verifies that all shells in the heterostructures are single crystals. This work suggests that all of the materials in the current 2D library could be rolled into their 1D counterparts and a plethora of function-designable 1D heterostructures could be realized.

Controlled Redox of Lithium-Ion Endohedral Fullerene for Efficient and Stable Metal Electrode-Free Perovskite Solar Cells.

High efficiency perovskite solar cells have underpinned the rapid growth of the field. However, their low device stability limits further advancement. Hygroscopic lithium bis(trifluoromethanesulfonyl)imide (Li+TFSI-) and metal electrode are the main causes of the device instability. In this work, the redox reaction between lithium-ion endohedral fullerenes and 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobi-fluorene (spiro-MeOTAD) was controlled to optimize the amount of oxidized spiro-MeOTAD and antioxidizing neutral endohedral fullerenes. Application of this mixture to metal-free carbon nanotube (CNT)-laminated perovskite solar cells resulted in 17.2% efficiency with a stability time of more than 1100 h under severe conditions (temperature = 60 °C, humidity = 70%). Such high performance is attributed to the uninhibited charge flow, no metal-ion migration, and the enhanced antioxidizing activity of the devices.

Aerosol-Assisted Fine-Tuning of Optoelectrical Properties of SWCNT Films.

We propose a novel, scalable, and simple method for aerosol doping of single-walled carbon nanotube (SWCNT) films. This method is based on aerosolization of a dopant solution (HAuCl4 in ethanol) and time-controlled deposition of uniform aerosol particles on the nanotube film surface. The approach developed allows fine-tuning of the SWCNT work function in the range of 4.45 (for pristine nanotubes) to 5.46 eV, controllably varying the sheet resistance of the films from 79 to 3.2 Ω/□ for the SWCNT films with 50% transmittance (at 550 nm). This opens a new avenue for traditional and flexible optoelectronics, both to replace existing indium-tin oxide electrodes and to develop novel applications of the highly conductive transparent films.

Mechanically Tunable Single-Walled Carbon Nanotube Films as a Universal Material for Transparent and Stretchable Electronics.

Soft, flexible, and stretchable electronic devices provide novel integration opportunities for wearable and implantable technologies. Despite the existing efforts to endow electronics with the capability of large deformation, the main technological challenge is still in the absence of suitable materials for the manufacturing of stretchable electronic circuits and devices with active (sensitive) and passive (stable) components. Here, we present a universal material, based on single-walled carbon nanotube (SWCNT) films deposited on a polydimethylsiloxane (PDMS) substrate, which can act as a material being both sensitive and insensitive to strain. The diverse performance of SWCNT/PDMS structures was achieved by two simple dry-transfer fabrication approaches: SWCNT film deposition onto the as-prepared PDMS and on the prestretched PDMS surface. The correlation between applied strain, microstructural evolution, and electro-optical properties is discussed on the basis of both experimental and computational results. The SWCNT/PDMS material with the mechanically tunable performance has a small relative resistance change from 0.05 to 0.07, while being stretched from 10 to 40% (stable electrode applications). A high sensitivity of 20.1 of the SWCNT/PDMS structures at a 100% strain was achieved (strain sensing applications). Our SWCNT/PDMS structures have superior transparency and conductivity compared to the ones reported previously, including the SWCNT/PDMS structures, obtained by wet processes.

Self-starting mode-locked Cr:ZnS laser using single-walled carbon nanotubes with resonant absorption at 2.4 µm.

We develop a mode-locked Cr:ZnS polycrystalline laser using single-walled carbon nanotubes (SWCNTs) that have resonant absorption at the wavelength of 2.4 µm. The laser generates ultrashort pulses of 49 fs duration, a 2.4 µm center wavelength, and a 9.2 THz (176 nm) spectral span at a repetition rate of 76 MHz. We also confirm self-starting of the mode-locked operation. SWCNTs, if appropriately controlled in terms of their diameters, prove to be useful as ultrafast saturable absorbers in the mid-infrared region.

Aerobic Co-/ N-Hydroxysuccinimide-Catalyzed Oxidation of p-Tolylsiloxanes to p-Carboxyphenylsiloxanes: Synthesis of Functionalized Siloxanes as Promising Building Blocks for Siloxane-Based Materials.

Synthesis of organosilicon products with a "polar" functional group within organic substituents is one of the most fundamentally and practically important challenges in today's chemistry of silicones. In our study, we suggest a solution to this problem, viz., a high-efficiency preparative method based on aerobic Co-/ N-hydroxysuccinimide (NHSI) catalyzed oxidation of p-tolylsiloxanes to p-carboxyphenylsiloxanes. This approach is based on "green", commercially available, simple, and inexpensive reagents and employs mild reaction conditions: Co(OAc)2/NHSI catalytic system, O2 as the oxidant, process temperature from 40 to 60 °C, atmospheric pressure. This reaction is general and allows for synthesizing both mono- and di-, tri-, and poly( p-carboxyphenyl)siloxanes with p-carboxyphenyl groups at 1,1-, 1,3-, 1,5-, and 1,1,1-positions. All the products were obtained and isolated in gram amounts (up to 5 g) and in high yields (80-96%) and characterized by NMR, ESI-HRMS, GPC, IR, and X-ray data: p-carboxyphenylsiloxanes in crystalline state form HOF-like structures. Furthermore, it was shown that the suggested method is applicable for the oxidation of organic alkylarene derivatives (Ar-CH3, Ar-CH2-R) to the corresponding acids and ketones (Ar-C(O)OH and Ar-C(O)-R), as well as hydride silanes ([Si]-H) to silanols ([Si]-OH). The possibility of synthesizing monomeric (methyl) and polymeric (siloxane-containing PET analogue, Sila-PET) esters based on 1,3-bis( p-carboxyphenyl)disiloxane was studied. These processes occur with retention of the organosiloxane frame and allow to obtain the corresponding products in 90 and 99% yields.