Validated stability-indicating RP-HPLC method for the determination of rimonabant in a pharmaceutical dosage form.

A simple RP-HPLC method was developed and validated for the determination of rimonabant in a pharmaceutical dosage form. The separation was performed on a C18 column (150 x 4.6 mm id, 5 microm) with acetonitrile-water (75 + 25, v/v) mobile phase. The detection was achieved with a diode array detector at 215 nm. The method was linear in the concentration range of 0.5-50 microg/mL (r = 1) with an LOQ of 0.24 microg/mL. The specificity and stability-indicating capability of the method were proved through forced degradation studies, and it was shown that there was no increase of the cytotoxicity. Rimonabant was exposed to hydrolytic, oxidative, and photolytic stress conditions, and the samples were analyzed by the proposed method. Under optimized conditions, rimonabant was successfully separated from its degradation products within 10 min, and the resolution was found to be greater than 2. The RSD values for intraday and interday precision were always less than 2%. Interday accuracy ranged from 98.1 to 101.7% (RSD = 1.0%). Moreover, method validation demonstrated acceptable results for sensitivity and robustness. The method was applied for the quantitative analysis of rimonabant in a tablet dosage form to demonstrate its use for improving the QC of pharmaceuticals containing this drug.

Development and validation of a stability-indicating LC method for the determination of venlafaxine in extended-release capsules and dissolution kinetic studies.

A stability-indicating reversed-phase high-performance liquid chromatography method is developed and validated for the determination of venlafaxine hydrochloride (VEN) in extended-release capsules containing spherical beads and for dissolution studies. The method is carried out on a Luna C(18) column (250 mm x 4.6 mm) maintained at 35 degrees C. The mobile phase is composed of ammonium-acetate buffer 32 mM, adjusted to pH 6.8 with phosphoric acid-acetonitrile-methanol (62:30:8, v/v/v), run at a flow rate of 1.0 mL/min, and detection at 226 nm. Validation parameters such as the specificity, linearity, precision, accuracy, and robustness are evaluated, giving results within the acceptable range. In order to evaluate the best dissolution condition, the dissolution profiles are performed under different conditions, such as media (HCl, water, phosphate buffer), apparatus (I and II), and dissolution rates (50, 75, and 100 rpm). The kinetics release mechanism is evaluated by fitting different models, such as the zero order rate, first order, and Higuchi. Moreover, the proposed method is successfully applied for the assay of VEN in extended-release capsules.