Impact of sediment parameters in the prediction of benthic microbial fuel cell performance.

The benthic microbial fuel cell (BMFC) is a promising technology for harvesting renewable energy from marine littoral environments. The scientific community has researched BMFC technology for well over a decade, but the in situ performance remains challenging. To address this challenge, BMFC power experiments were performed on sediment collected from San Diego Bay (CA, USA), La Spezia (Italy) and Honolulu (HI, USA) in the ever-changing littoral environment. Analysis of BMFC laboratory data found the power density varied substantially across 11 sites in San Diego Bay. In addition, data from experiments repeated at four locations in San Diego Bay showed significant differences between experiments performed in 2014, 2016 and 2019. Multivariable linear analysis showed BMFC 90 day cumulative power density was positively correlated with the total organic carbon (p < 0.05) and negatively correlated with the black carbon in the sediment (p < 0.05). Regression coefficients trained on the San Diego Bay data from 2014 facilitated accurate predictions of BMFC performance in 2016 and 2019. The modeling paradigm accurately explained variations in BMFC power performance in La Spezia and showed sediment parameters can impact BMFC performance differently across geographic regions. The results demonstrate a great potential to use sediment parameters and statistical modeling to predict BMFC power performance prior to deployment in oceanographic environments, thereby reducing cost, work force and resources.

Ecotoxicological response of marine organisms to inorganic and organic sediment amendments in laboratory exposures.

Experimental materials currently being investigated for use as amendments for the in situ remediation of contaminated sediments were assessed for their potential impacts on marine benthos. Laboratory toxicity tests involving lethal and sublethal endpoints were conducted on sediments amended with apatite, organoclay, chitin, or acetate, with the polychaete Neanthes arenaceodentata, the amphipod Eohaustorius estuarius, and the larval sheepshead minnow Cyprinodon variegatus. Amendments were mixed loosely into uncontaminated or metal-contaminated sediments, and also added inside experimental geotextile mats, at sediment dry weight (dw) concentrations ranging from 0.5% to 10%. The geotextile mats, containing apatite (5 or 10% dw), and/or organoclay (5%) did not result in adverse effects on any of the test organisms. Chitin and acetate, however, repetitively resulted in adverse effects on survival and/or adverse or positive effects on organism growth at concentrations of ≤ 2.5% dw. The adverse effects were attributed to water quality degradation in the exposure vessels (notably ammonia and dissolved oxygen concentration, for chitin and acetate, respectively) as a result of the microbial breakdown of the amendments. For N. arenaceodentata, growth was enhanced in the presence of chitin at concentrations as low as 0.5% sediment dw, which stimulated bacterial growth that may have provided an additional food source for the polychaete. Sediment chitin concentrations of 0.5% resulted in a statistically significant reduction in N. arenaceodentata body burdens of 61%, 29%, and 54%, relative to unamended contaminated sediment, for Cu, Zn, and Cd, respectively. The studies suggest a lack of inherent toxicity of these materials on the experimental organisms, as the adverse or positive responses observed are likely related to artifacts associated with laboratory exposure. Assessments in field settings are needed to verify this conclusion.