Green Synthesis of UV-Reactive Polycarbonates from Levoglucosenone and 5-Hydroxymethyl Furfural.

This study focuses on the synthesis of fully renewable polycarbonates (PCs) starting from cellulose-based platform molecules levoglucosenone (LGO) and 2,5-bis(hydroxymethyl)furan (BHMF). These unique bio-based PCs are obtained through the reaction of a citronellol-containing triol (Triol-citro) derived from LGO, with a dimethyl carbonate derivative of BHMF (BHMF-DC). Solvent-free polymerizations are targeted to minimize waste generation and promote an eco-friendly approach with a favorable environmental factor (E-factor). The choice of metal catalyst during polymerization significantly influences the polymer properties, resulting in high molecular weight (up to 755 kDa) when Na2 CO3 is employed as an inexpensive catalyst. Characterization using nuclear magnetic resonance confirms the successful incorporation of the furan ring and the retention of the terminal double bond of the citronellol pendant chain. Furthermore, under UV irradiation, the presence of both citronellol and furanic moieties induces singular structural changes, triggering the formation of three distinct structures within the polymer network, a phenomenon herein occurs for the first time in this type of polymer. These findings pave the way to new functional materials prepared from renewable monomers with tunable properties.

Furandicarboxylate Polyesters: A Comprehensive ADMET Study of a Novel Class of Furan-Based α,ω-Diene Monomers.

The present research article delves into the preparation of a new class of bio-based polyesters from α,ω-diene furandicarboxylate monomers. In particular, it exploits the use of acyclic diene metathesis polymerisation (ADMET) on 2,5-furandicarboxylic acid (FDCA)-derived compounds. First, a library of furan-based α,ω-diene monomers was prepared via acid- or base-catalyzed transesterification of 2,5-furandicarboxylic acid dimethyl ester (FDME) with commercially available alcohols incorporating terminal olefins, i. e., allyl alcohol, but-3-en-1-ol, hex-5-en-1-ol and dec-9-en-1-ol. Then, the novel monomers were subjected to ADMET polymerisation employing different catalysts and reaction conditions. Interestingly, first-generation Grubbs catalyst was found to be the best promoter for ADMET polymerisation. This catalyst allowed the preparation of a new family of bio-based polyesters with molecular weights up to 26.4 kDa, with good thermal stability, and adaptable cis-trans conformations. Results also revealed that the monomer structure had a direct impact on the polymerisation efficiency and the resulting thermal properties. The effect of green bio-based solvents such as Cyrene™, dimethyl isosorbide (DMI) and γ-valerolactone (GVL) on the polymerisation process was also studied. Data collected showed that the solvent concentration influenced both the yield and length of polymers formed. Furthermore, some co-polymerisation experiments were conducted; the successful integration of different monomers in the resulting copolymer was shown to affect the glass transition temperature (Tg) of the resulting materials.

Reaction Pathways in Carbonates and Esters.

This review reports on the competition/collaboration among intertwined base-catalyzed acyl cleavage bimolecular mechanism (BAc 2)/base-catalyzed alkyl cleavage bimolecular mechanism (BAl 2) or the related acid catalyzed mechanisms AAc 2/AAl 2 and AAl 1 concerning Carbonates chemistry also in comparison with Esters reactivity. A consistent analysis of the experimental data so far available in the literature led to proposing a theoretical Model outlining the differences in energy profiles among the above-mentioned reaction mechanisms. The reactions involving Carbonates are so tightly interconnected that the formation of the final product is driven by a precise not interfering sequence of BAc 2-BAl 2 (or AAl 2-AAc 2) mechanisms. When entropic effect (in cyclisations) or an anchimeric effect (mustard carbonates, isosorbide methylation) are involved, the difference in Gibbs activation energy is reduced allowing chemical transformations that would normally require higher temperatures. In these cases (intramolecular alkylation, cyclisation reaction, and alkylation by mustard carbonates) only a catalytic amount of base is required as the leaving group CH3 OCOO- decomposes restoring the base. As Green Chemistry is concerned, syntheses with much lower environmental impact are achieved with Carbonates when compared with the corresponding ones involving Chlorine chemistry.

Multigram Synthesis of Pure HMF and BHMF.

5-Hydroxymethylfurfural (HMF) is a bio-based platform chemical that can be used as a building block to produce several compounds with diverse applications. Even though HMF synthesis holds promise for a greener future, the current state of technology and the high production cost limit its competitiveness on an industrial scale. In this prospect, we have developed a multigram-scale procedure for HMF by reacting d-fructose with Purolite CT275DR-an acidic resin-in a dimethyl carbonate (DMC)/tetraethyl ammonium bromide (TEAB) biphasic system. Reactions performed in an autoclave for 2 h at 110 °C using up to 40 gram of d-fructose resulted in an overall HMF yield of 70%. HMF was purified by a custom-made procedure leading to ca 50% of the pure crystalline product; meanwhile, the residual HMF-rich oil was directly reduced to bis(hydroxymethyl)furan (BHMF). Green metrics and the Ecoscale algorithm were used to evaluate the sustainability of the herein-proposed procedure in comparison with previously reported works.

Sustainable Hyperbranched Functional Materials via Green Polymerization of Readily Accessible Levoglucosenone-Derived Monomers.

The homopolymerization in basic conditions of the recently reported bis(γ-lactone), 2H-HBO-HBO, is herein described for the first time. The solvent-free polymerization of this pentafunctional levoglucosenone (LGO) derivative affords fully renewable poly(vinyl-ether lactone) copolymers with a highly hyperbranched structure. This investigation stems from the polycondensation trials between 2H-HBO-HBO and di(methyl carbonate) isosorbide (DCI) that fails to give the anticipated polycarbonates. Such unexpected behavior is ascribed to the higher reactivity of the 2H-HBO-HBO hydroxy groups toward its α,ß-conjugated endocyclic C═C, rather than the DCI methylcarbonate moieties. The different mechanistic scenarios involved in 2H-HBO-HBO homopolymerization are addressed and a possible structure of poly(2H-HBO-HBO) is suggested. Furthermore, the readily accessible (S)-γ-hydroxymethyl-α,ß-butenolide (HBO) is also polymerized for the first time at a relatively large scale, without any prior modification, resulting in a new hyperbranched polymer with an environmental factor (E factor) ≈0. These new HBO-based polymers have a great potential for industrial-scale production due to their interesting properties and easy preparation via a low-cost, green, and efficient process.

Dialkyl Carbonates in the Green Synthesis of Heterocycles.

This review focuses on the use of dialkyl carbonates (DACs) as green reagents and solvents for the synthesis of several 5- and 6-membered heterocycles including: tetrahydrofuran and furan systems, pyrrolidines, indolines, isoindolines, 1,4-dioxanes, piperidines, and cyclic carbamates. Depending on the heterocycle investigated, the synthetic approach used was different. Tetrahydrofuran systems, pyrrolidines, indolines, isoindoline, and 1,4-dioxanes were synthesized using dimethyl carbonate (DMC) as sacrificial molecule (BAc2/BAl2 mechanism). Cyclic carbamates, namely 1,3-oxazin-2-ones, were prepared employing DACs as carbonylating agents, either by BAc2/BAl2 mechanism or through a double BAc2 mechanism. Piperidines were synthetized taking advantage of the anchimeric effect of a new family of dialkyl carbonates, i.e., mustard carbonates. Finally, in the case 5-hydroxymethylfurfural (HMF), DMC has been employed as efficient extracting solvent of this extensively investigated bio-based platform chemical from the reaction mixture. These synthetic approaches demonstrate, once again, the great versatility of DACs and their-yet to be fully explored-potential as green reagents and solvents in the synthesis of heterocycles.

ß-Aminocarbonates in Regioselective and Ring Expansion Reactions.

The reactivity of ß-aminocarbonates as anisotropic electrophiles has been investigated with several phenols. Products distribution shows that the regioselectivity of the anchimerically driven alkylation reaction depends on the nucleophiles. The results suggest that in the presence of nucleophiles that are also good leaving groups, the reaction takes place under thermodynamic control favoring the attack on the most sterically hindered carbon of the cyclic aziridinium intermediate. Furthermore, when an enantiomerically pure pyrrolidine-based carbonate was used, the reaction with phenols proceeds via a bicyclic aziridinium intermediate leading to the stereoselective synthesis of optically active 3-substituted piperidines via ring expansion reaction. These results were confirmed both by NMR spectroscopy and X-ray diffraction analysis.

Isosorbide and dimethyl carbonate: a green match.

In this review the reactivity of the bio-based platform compounds D-sorbitol and isosorbide with green reagents and solvent dimethyl carbonate (DMC) is reported. Dehydration of D-sorbitol via DMC in the presence of catalytic amounts of base is an efficient and viable process for the preparation of the industrially relevant anhydro sugar isosorbide. This procedure is "chlorine-free", one-pot, environmental friendly and high yielding. The reactivity of isosorbide with DMC is equally interesting as it can lead to the formation of dicarboxymethyl isosorbide, a potential monomer for isosorbide-based polycarbonate, and dimethyl isosorbide, a high boiling green solvent. The peculiar reactivity of isosorbide and the non-toxic properties of DMC represent indeed a green match leading to several industrial appealing potential applications.

Azacrown Ethers from Mustard Carbonate Analogues.

Polycondensation of a nitrogen mustard carbonate analogue with aromatic diols under dilution conditions affords a series of azacrown ethers previously not easily accessible as they require multistep synthesis including protection, purification, cyclization and methylation. This novel synthesis relies upon the anchimeric effect of the nitrogen mustard carbonate and it does not require the use of any base.

Synthesis of five-membered cyclic ethers by reaction of 1,4-diols with dimethyl carbonate.

The reaction of 1,4-diols with dimethyl carbonate in the presence of a base led to selective and high-yielding syntheses of related five-membered cyclic ethers. This synthetic pathway has the potential for a wide range of applications. Distinctive cyclic ethers and industrially relevant compounds were synthesized in quantitative yield. The reaction mechanism for the cyclization was investigated. Notably, the chirality of the starting material was maintained. DFT calculations indicated that the formation of five-membered cyclic ethers was energetically the most favorable pathway. Typically, the selectivity exhibited by these systems could be rationalized on the basis of hard-soft acid-base theory. Such principles were applicable as far as computed energy barriers were concerned, but in practice cyclization reactions were shown to be entropically driven.

The stability of imine-containing dynamic [2]rotaxanes to hydrolysis.

Large amounts (>100 mol equivalents) of water are required to effect by hydrolysis the partial disassembly of the rings from the dumbbell components of two dynamic [2]rotaxanes. The two dynamic [2]rotaxanes are comprised of [24]crown-8 rings-each of which incorporate two imine bonds-encircling a dumbbell component composed of a dibenzylammonium ion in which each of the two benzyl substituents carries two methoxyl groups attached to their 3- and 5-positions. A mechanism for the partial disassembly of the two dynamic [2]rotaxanes, involving the cleavage of the kinetically labile imine bonds by water molecules, is proposed. The most important experimental observation to be noted is the fact that the hydrolysis of the macrocyclic diimines, associated with the templating -CH(2)NH(2)(+)CH(2)-centres in the middle of their dumbbells, turns out to be an uphill task to perform in the face of the molecular recognition provided by strong [N(+)-HO] hydrogen bonds and weaker, yet not insignificant, [C-HO] interactions. The dynamic nature of the imine bond formation and hydrolysis is such that the acyclic components produced during hydrolysis of the imine bonds can be enticed to cyclise once again around the -CH(2)NH(2)(+)CH(2)-template, affording the [2]rotaxanes. The reluctance of imine bonds, present in substantial numbers in larger molecular and extended structures, is significant when it comes to exercising dynamic chemistry in compounds where multiple imine bonds are present.

Insight into the hard-soft acid-base properties of differently substituted phenylhydrazines in reactions with dimethyl carbonate.

Following the preliminary studies on the reactivity of the ambident nucleophile phenylhydrazine with dimethyl carbonate, investigations involving para-substituted phenylhydrazines were carried out in order to probe differences in the reactivity within this class of nucleophile. Phenylhydrazines substituted by electron withdrawing or donating substituents showed an increase in reactivity of the phenylhydrazine toward dimethyl carbonate. Under the basic conditions used, all phenylhydrazines displayed hard nucleophilicity, signifying that para-substitution on the phenyl ring has little effect on the hard-soft behavior of this class of nucleophile. This conclusion fits well within the results previously obtained using other para-substituted nucleophiles, i.e., phenols.

Reaction of the ambident electrophile dimethyl carbonate with the ambident nucleophile phenylhydrazine.

To explore the ambident electrophilic reactivity of dimethyl carbonate (DMC), reactions with the ambident nucleophile phenylhydrazine were investigated. When a Brönsted base was used, selective carboxymethylation occurred at N-1, after that several other compounds were produced selectively utilizing various conditions. Formation of these compounds was explained by using the Hard-Soft Acid-Base (HSAB) theory. Catalysis by some metal salts altered the reactivity of phenylhydrazine, which effected selective carboxymethylation at N-2 of phenylhydrazine instead.

Template-directed synthesis of mechanically interlocked molecular bundles using dynamic covalent chemistry.

Mixing the dipyrido[24]crown-8 derivatives carrying one or two formyl group(s) on the 4 position(s) of their pyridine ring(s) with a 3-fold symmetrical trisammonium ion template in a 3:1 ratio in CD3NO2 results in the formation of thermodynamically stable [4]pseudorotaxanes which, upon addition of a 1,3,5-trisaminobenzene cap, form mechanically interlocked molecular bundles with one and two caps, respectively, by virtue of dynamic imine bond formation.

Template-directed synthesis of multiply mechanically interlocked molecules under thermodynamic control.

The template-directed construction of crown-ether-like macrocycles around secondary dialkylammonium ions (R2NH2+) has been utilized for the expedient (one-pot) and high-yielding synthesis of a diverse range of mechanically interlocked molecules. The clipping together of appropriately designed dialdehyde and diamine compounds around R2NH2+-containing dumbbell-shaped components proceeds through the formation, under thermodynamic control, of imine bonds. The reversible nature of this particular reaction confers the benefits of "error-checking" and "proof-reading", which one usually associates with supramolecular chemistry and strict self-assembly processes, upon these wholly molecular systems. Furthermore, these dynamic covalent syntheses exploit the efficient templating effects that the R2NH2+ ions exert on the macrocyclization of the matched dialdehyde and diamine fragments, resulting not only in rapid rates of reaction, but also affording near-quantitative conversion of starting materials into the desired interlocked products. Once assembled, these "dynamic" interlocked compounds can be "fixed" upon reduction of the reversible imine bonds (by using BH3.THF) to give kinetically stable species, a procedure that can be performed in the same reaction vessel as the inital thermodynamically controlled assembly. Isolation and purification of the mechanically interlocked products formed by using this protocol is relatively facile, as no column chromatography is required. Herein, we present the synthesis and characterization of 1) a [2]rotaxane, 2) a [3]rotaxane, 3) a branched [4]rotaxane, 4) a bis [2]rotaxane, and 5) a novel cyclic [4]rotaxane, demonstrating, in incrementally more complex systems, the efficacy of this one-pot strategy for the construction of interlocked molecules.

Template-directed dynamic synthesis of mechanically interlocked dendrimers.

The versatility and efficiency of dynamic covalent chemistry (DCC) has been exploited in the convergent synthesis of mechanically interlocked dendrimers that are based upon the mutual recognition expressed between secondary dialkylammonium ions and crown ether-like macrocycles. Reversible imine bond formation is employed to clip two acyclic fragments, one of them a diformylpyridine unit bearing a dendritic side chain, and the other a complementary dianiline in the shape of the di(o-aminophenyl)ether of tetraethylene glycol, around each arm of a tritopic trisammonium ion core, thereby affording a branched [4]rotaxane. This template-directed strategy has been demonstrated to work in very high yields (>90%) with successive generations (G0-G2) of a modified Fréchet-type dendritic wedge attached to the 4-position of the diformylpyridine unit. Reduction of these dynamic dendritic systems is achieved upon treatment with borane.THF and results in kinetically stable compounds. The inherent modularity of the overall process should allow for the rapid and straightforward access to many other analogous mechanically interlocked systems in which either the branched core or the dendritic periphery can be modified to suit the needs of any given application of these molecules. Indeed, the dynamic nature of the initial thermodynamically mediated assembly could be utilized in order to amplify particular products from a potential library as a result of a selective recognition process.

Synthesis of a [2]catenane around a Ru(diimine)3(2+) scaffold by ring-closing metathesis of olefins.

[reaction: see text] The synthesis of a ruthenium[2]catenane is described. One ring includes two 1,10-phenanthroline moieties, the other a bipyridinic unit. The interlocking ring system was formed by using a double ring closing metathesis reaction. Under irradiation, a rapid and selective decoordination of the bipyridinic fragment was observed, leading to a new catenane in which the metal is only coordinated to the bis-phenanthroline moiety.