Enhancing drug delivery with supramolecular amphiphilic macrocycle nanoparticles: selective targeting of CDK4/6 inhibitor palbociclib to melanoma.

Drug delivery systems based on amphiphilic supramolecular macrocycles have garnered increased attention over the past two decades due to their ability to successfully formulate nanoparticles. Macrocyclic (MC) materials can self-assemble at lower concentrations without the need for surfactants and polymers, but surfactants are required to form and stabilize nanoparticles at higher concentrations. Using MCs to deliver both hydrophilic and hydrophobic guest molecules is advantageous. We developed two novel types of amphiphilic macrocycle nanoparticles (MC NPs) capable of delivering either Nile Red (NR) (a hydrophobic model) or Rhodamine B (RhB) (a hydrophilic model) fluorescent dyes. We extensively characterized the materials using various techniques to determine size, morphology, stability, hemolysis, fluorescence, loading efficiency (LE), and loading capacity (LC). We then loaded the CDK4/6 inhibitor Palbociclib (Palb) into both MC NPs using a solvent diffusion method. This yielded Palb-MC NPs in the size range of 65-90 nm. They exhibited high stability over time and in fetal bovine serum with negligible toxicity against erythrocytes. Cytotoxicity was minimal when tested against RAW macrophages, human fibroblast HDFn, and adipose stromal cells (ASCs) at higher concentrations of MC NPs. Cell viability studies were conducted with different concentrations of MC NPs, Palb-MC NPs, and free Palb against RAW macrophages, human U-87 GBM, and human M14 melanoma cell lines in vitro. Flow cytometry experiments revealed that blank MC NPs and Palb-MC NPs were selectively targeted to melanoma cells, resulting in cell death compared to the other two cell lines. Future work will focus on studying the biological effect of MC NPs including their binding affinity with molecules/receptors expressed on the M14 and other melanoma cell surfaces by molecular docking simulations. Subsequently, we will evaluate the MCs as a component of combination therapy in a murine melanoma model.

Enhancing Drug Delivery with Supramolecular Amphiphilic Macrocycle Nanoparticles: Selective Targeting of CDK4/6 Inhibitor Palbociclib to Melanoma.

Drug delivery systems based on amphiphilic supramolecular macrocycles have garnered increased attention over the past two decades due to their ability to successfully formulate nanoparticles. Macrocyclic (MC) materials can self-assemble at lower concentrations without the need for surfactants and polymers, but surfactants are required to form and stabilize nanoparticles at higher concentrations. Using MCs to deliver both hydrophilic and hydrophobic guest molecules is advantageous. We developed two novel types of amphiphilic macrocycle nanoparticles (MC NPs) capable of delivering either Nile Red (NR) (a hydrophobic model) or Rhodamine B (RhB) (a hydrophilic model) fluorescent dyes. We extensively characterized the materials using various techniques to determine size, morphology, stability, hemolysis, fluorescence, loading efficiency (LE), and loading capacity (LC). We then loaded the CDK4/6 inhibitor Palbociclib (Palb) into both MC NPs using a solvent diffusion method. This yielded Palb-MC NPs in the size range of 65-90 nm. They exhibited high stability over time and in fetal bovine serum with negligible toxicity against erythrocytes. Cytotoxicity was minimal when tested against RAW macrophages, human fibroblast HDFn , and adipose stromal cells (ASCs) at higher concentrations of MC NPs. Cell viability studies were conducted with different concentrations of MC NPs, Palb-MC NPs, and free Palb against RAW macrophages, human U-87 GBM, and human M14 melanoma cell lines in vitro. Flow cytometry experiments revealed that blank MC NPs and Palb-MC NPs were selectively targeted to melanoma cells, resulting in cell death compared to the other two cell lines. Future work will focus on studying the biological effect of MC NPs including their binding affinity with molecules/receptors expressed on the M14 and other melanoma cell surface by molecular docking simulations. Subsequently, we will evaluate the MCs as a component of combination therapy in a murine melanoma model.

CT and X-ray contrast agents: Current clinical challenges and the future of contrast.

Computed tomography (CT) is a powerful and widely used imaging technique in modern medicine. However, it often requires the use of contrast agents to visualize structures with similar radiographic density. Unfortunately, current clinical contrast agents (CAs) for CT have remained largely unchanged for decades and come with several significant drawbacks, including serious nephrotoxicity and short circulation half-lives. The next generation of CT radiocontrast agents should strive to be long-circulating, non-toxic, and non-immunogenic. Nanoparticle contrast agents have shown promise in recent years and are likely to comprise the majority of next-generation CT contrast agents. This review highlights the fundamental mechanism and background of X-ray and contrast agents. It also focuses on the challenges associated with current clinical contrast agents and provides a brief overview of potential future agents that are based on various materials such as lipids, polymers, dendrimers, metallic, and non-metallic inorganic nanoparticles (NPs). STATEMENT OF SIGNIFICANCE: We realized a need for clarification on a number of concerns related to the use of iodinated contrast material as debates regarding the safety of these agents with patients with kidney disease, shellfish allergies, and thyroid dysfunction remain ongoing in medical practice. This review was partially inspired by debates witnessed in medical practice regarding outdated misconceptions of contrast material that warrant clarification in translational and clinical arenas. Given that conversation around currently available agents is at somewhat of a high water mark, and nanoparticle research has now reached an unprecedented number of readers, we find that this review is timely and unique in the context of recent discussions in the field.

Lignocellulosic-Based Nanoparticles with Photoluminescent Properties for Bioimaging.

Natural and renewable resources from plants or animals are an important source of biomaterials due to their biocompatibility and high availability. Lignin is a biopolymer present in the biomass of plants, where it is intertwined and cross-linked with other polymers and macromolecules in the cell walls, generating a lignocellulosic material with potential applications. We have prepared lignocellulosic-based nanoparticles with an average size of 156 nm that exhibit a high photoluminescence signal when excited at 500 nm with emission in the near-infrared (NIR) region at 800 nm. The advantage of these lignocellulosic-based nanoparticles is their natural luminescent properties and their origin from rose biomass waste, which eliminates the need for encapsulation or functionalization of imaging agents. Moreover, the in vitro cell growth inhibition (IC50) of lignocellulosic-based nanoparticles is about 3 mg/mL, and no in vivo toxicity was registered up to 57 mg/kg, which suggests that they are suitable for bioimaging applications. In addition, these nanoparticles can circulate in the blood and are excreted in urine. The combined high luminescence signal in NIR, small size, low in vitro toxicity, low in vivo toxicity, and blood circulation support the potential of lignin-based nanoparticles as a novel bioimaging agent.

Chitosan-graphene quantum dot based active film as smart wound dressing.

Graphene quantum dots (GQDs), are biocompatible materials, with mechanical strength and stability. Chitosan, has antibacterial and anti-inflammatory properties, and biocompatibility. Wound healing is a challenging process especially in chronic diseases and infection. In this study, films consisting of chitosan and graphene quantum dots were developed for application in infected wounds. The chitosan-graphene films were prepared in the acidic solution followed by slow solvent evaporation and drying. The chitosan-graphene films were characterized by the scanning electron microscopy, x-ray diffraction, atomic force microscopy, Raman spectroscopy and thermogravimetric analysis. The films' was evaluated by the wound healing assays, hemolytic potential, and nitrite production, cytokine production and swelling potential. The obtained films were flexible and well-structured, promoting cell migration, greater antibacterial activity, lower hemolytic activity, and maintaining wound moisture. Our data suggested that the use of graphene quantum dot-containing chitosan films would be an efficient and promising way in combating wounds.

Radiopaque Iodosilane-Coated Lipid Hybrid Nanoparticle Contrast Agent for Dual-Modality Ultrasound and X-ray Bioimaging.

Here, we report the synthesis of robust hybrid iodinated silica-lipid nanoemulsions (HSLNEs) for use as a contrast agent for ultrasound and X-ray applications. We engineered iodinated silica nanoparticles (SNPs), lipid nanoemulsions, and a series of HSLNEs by a low-energy spontaneous nanoemulsification process. The formation of a silica shell requires sonication to hydrolyze and polymerize/condensate the iodomethyltrimethoxysilane at the oil/water interface of the nanoemulsion droplets. The resulting nanoemulsions (NEs) exhibited a homogeneous spherical morphology under transmission electron microscopy. The particles had diameters ranging from 20 to 120 nm with both negative and positive surface charges in the absence and presence of cetyltrimethylammonium bromide (CTAB), respectively. Unlike CTAB-coated nanoformulations, the CTAB-free NEs showed excellent biocompatibility in murine RAW macrophages and human U87-MG cell lines in vitro. The maximum tolerated dose assessment was evaluated to verify their safety profiles in vivo. In vitro X-ray and ultrasound imaging and in vivo computed tomography were used to monitor both iodinated SNPs and HSLNEs, validating their significant contrast-enhancing properties and suggesting their potential as dual-modality clinical agents in the future.

Nanomicelles of Radium Dichloride [223Ra]RaCl2 Co-Loaded with Radioactive Gold [198Au]Au Nanoparticles for Targeted Alpha-Beta Radionuclide Therapy of Osteosarcoma.

Alpha and beta particulate radiation are used for non-treated neoplasia, due to their ability to reach and remain in tumor sites. Radium-223 (223Ra), an alpha emitter, promotes localized cytotoxic effects, while radioactive gold (198Au), beta-type energy, reduces radiation in the surrounding tissues. Nanotechnology, including several radioactive nanoparticles, can be safely and effectively used in cancer treatment. In this context, this study aims to analyze the antitumoral effects of [223Ra]Ra nanomicelles co-loaded with radioactive gold nanoparticles ([198Au]AuNPs). For this, we synthesize and characterize nanomicelles, as well as analyze some parameters, such as particle size, radioactivity emission, dynamic light scattering, and microscopic atomic force. [223Ra]Ra nanomicelles co-loaded with [198Au]AuNPs, with simultaneous alpha and beta emission, showed no instability, a mean particle size of 296 nm, and a PDI of 0.201 (±0.096). Furthermore, nanomicelles were tested in an in vitro cytotoxicity assay. We observed a significant increase in tumor cell death using combined alpha and beta therapy in the same formulation, compared with these components used alone. Together, these results show, for the first time, an efficient association between alpha and beta therapies, which could become a promising tool in the control of tumor progression.

Bimodal Ultrasound and X-ray Bioimaging Properties of Particulate Calcium Fluoride Biomaterial.

Ultrasound (US) and X-ray imaging are diagnostic methods that are commonly used to image internal body structures. Several organic and inorganic imaging contrast agents are commercially available. However, their synthesis and purification remain challenging, in addition to posing safety issues. Here, we report on the promise of widespread, safe, and easy-to-produce particulate calcium fluoride (part-CaF2) as a bimodal US and X-ray contrast agent. Pure and highly crystalline part-CaF2 is obtained using a cheap commercial product. Scanning electron microscopy (SEM) depicts the morphology of these particles, while energy-dispersive X-ray spectroscopy (EDS) confirms their chemical composition. Diffuse reflectance ultraviolet-visible spectroscopy highlights their insulating behavior. The X-ray diffraction (XRD) pattern reveals that part-CaF2 crystallizes in the face-centered cubic cell lattice. Further analyses regarding peak broadening are performed using the Scherrer and Williamson-Hall (W-H) methods, which pinpoint the small crystallite size and the presence of lattice strain. X-ray photoelectron spectroscopy (XPS) solely exhibits specific peaks related to CaF2, confirming the absence of any contamination. Additionally, in vitro cytotoxicity and in vivo maximum tolerated dose (MTD) tests prove the biocompatibility of part-CaF2. Finally, the results of the US and X-ray imaging tests strongly signal that part-CaF2 could be exploited in bimodal bioimaging applications. These findings may shed a new light on calcium fluoride and the opportunities it offers in biomedical engineering.

Scaled Synthesis of Polyamine-Modified Cellulose Nanocrystals from Bulk Cotton and Their Use for Capturing Volatile Organic Compounds.

We have previously demonstrated that cellulose nanocrystals modified with poly(ethylenimine) (PEI-f-CNC) are capable of capturing volatile organic compounds (VOCs) associated with malodors. In this manuscript, we describe our efforts to develop a scalable synthesis of these materials from bulk cotton. This work culminated in a reliable protocol for the synthesis of unmodified cellulose nanocrystals (CNCs) from bulk cotton on a 0.5 kg scale. Additionally, we developed a protocol for the modification of the CNCs by means of sequential 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) oxidation and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) coupling to modify their surface with poly(ethylenimine) on a 100 g scale. Subsequently, we evaluated the performance of the PEI-f-CNC materials that were prepared in a series of VOC capture experiments. First, we demonstrated their efficacy in capturing volatile fatty acids emitted at a rendering plant when formulated as packed-bed filter cartridges. Secondly, we evaluated the potential to use aqueous PEI-f-CNC suspensions as a spray-based delivery method for VOC remediation. In both cases, the PEI-f-CNC formulations reduced detectable malodor VOCs by greater than 90%. The facile scaled synthesis of these materials and their excellent performance at VOC remediation suggest that they may emerge as a useful strategy for the remediation of VOCs associated with odor.

In Situ Photopolymerization of Acrylamide Hydrogel to Coat Cellulose Acetate Nanofibers for Drug Delivery System.

In this study we developed electrospun cellulose acetate nanofibers (CANFs) that were loaded with a model non-steroidal anti-inflammatory drug (NSAID) (ibuprofen, Ib) and coated with poly(acrylamide) (poly-AAm) hydrogel polymer using two consecutive steps: an electrospinning process followed by photopolymerization of AAm. Coated and non-coated CANF formulations were characterized by several microscopic and spectroscopic techniques to evaluate their physicochemical properties. An analysis of the kinetic release profile of Ib showed noticeable differences due to the presence or absence of the poly-AAm hydrogel polymer. Poly-AAm coating facilitated a constant release rate of drug as opposed to a more conventional burst release. The non-coated CANFs showed low cumulative drug release concentrations (ca. 35 and 83% at 5 and 10% loading, respectively). Conversely, poly-AAm coated CANFs were found to promote the release of drug (ca. 84 and 99.8% at 5 and 10% loading, respectively). Finally, the CANFs were found to be superbly cytocompatible.

Polytetrafluoroethylene-like Nanoparticles as a Promising Contrast Agent for Dual Modal Ultrasound and X-ray Bioimaging.

Various noninvasive imaging techniques are used to produce deep-tissue and high-resolution images for biomedical research and clinical purposes. Organic and inorganic bioimaging agents have been developed to enhance the resolution and contrast intensity. This paper describes the synthesis of polytetrafluoroethylene-like nanoparticles (PTFE≈ NPs), their characterization, biological activity, and bioimaging properties. Transmission electron microscopy (TEM) images showed the shape and the size of the as-obtained small and ultrasmall PTFE≈ NPs. Fourier transform infrared spectroscopy (FTIR) confirmed the PTFE-like character of the samples. X-ray diffraction (XRD) enabled the determination of the crystallization system, cell lattice, and index of crystallinity of the material in addition to the presence of titania (TiO2) as the contamination. These findings were corroborated by X-ray photoelectron spectroscopy (XPS) that identifies the chemical states of the elements present in the samples along with their atomic percentages allowing the determination of both the purity index of the sample and the nature of the impurities. Additionally, diffuse reflectance ultraviolet-visible spectroscopy (UV-vis) was used to further assess the optical properties of the materials. Importantly, PTFE≈ NPs showed significant in vitro and in vivo biocompatibility. Lastly, PTFE≈ NPs were tested for their ultrasound and X-ray contrast properties. Our encouraging preliminary results open new avenues for PTFE-like nanomaterials as a suitable multifunctional contrast agent for biomedical imaging applications. Combined with suitable surface chemistry and morphology design, these findings shed light to new opportunities offered by PTFE nanoparticles in the ever-booming biomedical field.

Alginate, gelatin, and carboxymethyl cellulose coated nonwoven fabrics containing antimicrobial AgNPs for skin wound healing in rats.

Nonwoven fabrics containing silver nanoparticles (AgNPs) are widely utilized to assist management of infected wounds and those at risk of infection. However, such materials have varied responses due to their chemical nature. Herein we investigated the correlation between the concentration of AgNPs taken up by nonwoven viscose material and antibacterial activity in a simulated wound fluid model against two bacterial models (i.e., Escherichia coli and Staphylococcus aureus). Thereafter, the developed nonwoven viscose containing AgNPs were independently coated with two polyacid carbohydrate polymers (i.e., carboxymethyl chitosan (CMCs), alginate (ALG)), and gelatin (GEL) protein in order to study their influence on the physical and biological attributes in vitro and in vivo. Intensive characterizations were utilized to monitor the physicochemical features of the developed nonwoven viscose. The results demonstrated that higher concentrations of AgNPs were taken up by viscose fabric whilewhile increasing AgNPs in the colloidal solution during padding process. Overall, the treated nonwoven fabric with and without polymers' coatings showed remarkable antibacterial activity against two bacterial models in vitro. As well as they achieved high and speed wound recovery in rats which was almost similar to commercial dermazin treatment. Therefore, it validates excellent nonwoven dressing clinically relevant to the wound type and condition.

Polymer-Scaffolded Synthesis of Periodic Mesoporous Organosilica Nanomaterials for Delivery Systems in Cancer Cells.

We developed four types of para-phenylene-bridged periodic mesoporous organosilica NPs (p-P PMO NPs) with tailored physical parameters including size, morphology, porosity, and surface area using a new polymer-scaffolding approach. The particles have been formulated to facilitate the codelivery of small-molecule hydrophobic/hydrophilic cargos such as model anticancer drugs (i.e., doxorubicin hydrochloride (DOX) and O6-benzylguanine) and model fluorescent dyes (i.e., rhodamine 6G and Nile red). p-P PMO NPs were synthesized via a cetyltrimethylammonium bromide (CTAB)-directed sol-gel process using two different organic solvents and in the presence of polymeric scaffolding constituents that led to morphologically distinct PMO NPs despite using the same organosilane precursors. After the formulation process, the polymeric scaffolding agent was conveniently washed away from the PMO NPs. Extensive analyses were used to characterize the physicochemical attributes of the PMO NPs such as their chemical composition, morphologies, etc. Spherical and rod-shaped PMOs of diameters ranging between 79 and 342 nm, surface areas between 770 and 1060 m2/g, and pore volumes between 0.79 and 1.37 cm3/g were prepared using the polymer-scaffolding approach. The performance of these materials toward drug-loading capacity, cytotoxicity, and cancer cell internalization was evaluated. Interestingly, the designed particles exhibited significantly high payloads of drugs and dyes (up to 78 and 94%, respectively). Cellular studies also demonstrated exceptional biocompatibility and marked internalization into both human breast cancer MCF-7 and glioblastoma U-87 MG cells. Further, DOX also possessed a noticeable release from particles and accumulation in cell nuclei with increased incubation time in vitro. Ultimately, this work validates the controlled design and synthesis of PMO NPs using a polymer-scaffolding approach and highlights the potential of these materials as excellent delivery systems for combination therapy with high loading capability to improve the therapeutic index for cancers.

Curcumin nanoparticles have potential antioxidant effect and restore tetrahydrobiopterin levels in experimental diabetes.

Diabetes is associated with an increase in the production of free radicals, reduction of tetrahydrobiopterin (BH4, THB) levels and reduced bioavailability of nitric oxide (NO) in the vascular walls. In this contribution, we probed the effective role of curcumin nanoparticles (CUR-NPs) that prepared via solvent evaporation nanoprecipitation technique as potential system to attenuate endothelial dysfunction. In this technique, Tween 60 (polysorbate) was used as stabilizing agent for the prepared CUR-NPs and protect such nanoparticles from further agglomeration. BH4 levels and other parameters were estimated in diabetic rats. To this end, we dedicated 48 male albino rats, categorized into six groups; control (healthy rats), diabetic rats, along with four treated groups via oral administration of 0.2 mL/kg body weight/day of solutions of Tween 60 (60 mg/mL), free CUR (60 mg/mL), CUR-NPs1 (30 mg/mL), and CUR-NPs2 (60 mg/mL) for 30 days. Results showed that the mean level of malondialdehyde (MDA) has been significantly increased in diabetic group associated with a reduction of total antioxidant capacity, NO, and BH4 compared to control. These parameters were restored by the delivery of CUR-NPs - both doses in rats, compared with the two control groups that treated with Tween 60 and free CUR.

In situ preparation of gold-polyester nanoparticles for biomedical imaging.

The synthesis and application of gold nanoparticles (AuNPs) have attracted much attention due to their interesting optical and chemical properties, as well as their utility in imaging, therapeutics, sensors, electronics, and catalysis. AuNPs are synthesized using multiple approaches, followed by chemical modification or encapsulation, to enhance their colloidal stability, biocompatibility, and targeting. Here, we report the one-step synthesis of gold-polyester nanoparticles for use as an imaging agent. The AuNPs were prepared inside polymeric NPs by means of ultraviolet irradiation of a gold salt in the presence of Irgacure I-2959 photoinitiator. We monitored the kinetic growth and nucleation of AuNPs (in vitro and ex vivo) over time using spectral analysis. Moreover, we investigated the cytotoxicity, localized plasmonic surface resonance (LSPR), and cellular imaging capabilities of the Au-polyester nanoparticles. The resulting Au-polyester NPs were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), dynamic light scattering (DLS), and transmission electron microscopy (TEM) to probe their chemical structure, size, zeta potential (ζ), and morphology, respectively. Furthermore, in vitro experiments showed that the NP formulation is stable over time and exhibits negligible toxicity against 3T3 fibroblast and U-87 MG glioblastoma cells. The results also demonstrated that the Au-polyester NPs exhibit excellent cellular imaging properties. This one-step strategy goes beyond current syntheses of gold-polyester nanoparticles because it can be used to synthesize the imaging agent in situ (i.e., in living cells) in lieu of conventional ex situ approaches.

Iodinated Polyesters with Enhanced X-ray Contrast Properties for Biomedical Imaging.

Synthetic materials exhibiting contrast imaging properties have become vital to the field of biomedical imaging. However, polymeric biomaterials are lacking imaging contrast properties for deep tissue imaging. This report details the synthesis and characterization of a suite of aryl-iodo monomers, which were used to prepare iodinated polyesters using a pre-functionalization approach. Commercially available 4-iodo-phenylalanine or 4-iodobenzyl bromide served as the starting materials for the synthesis of three iodinated monomeric moieties (a modified lactide, morpholine-2,5-dione, and caprolactone), which under a tin-mediated ring-opening polymerization (ROP), generated their respective polyesters (PE) or poly(ester amides) (PEA). An increase in X-ray intensity of all synthesized iodine-containing polymers, in comparison to non-iodinated poly(lactic acid) (PLA), validated their functionality as radio-opaque materials. The iodinated-poly(lactic acid) (iPLA) material was visualized through varying thicknesses of chicken tissue, thus demonstrating its potenial as a radio-opaque biomaterial.

Cellulose particles capture aldehyde VOC pollutants.

Aldehydes are commonly encountered Volatile Organic Compounds (VOCs) released to the atmosphere from a variety of anthropogenic sources. Based on the increasing interest in developing sustainable and environmentally friendly materials for the decontamination of VOCs, cellulose particles have emerged as one possible candidate, but there is a lack of understanding of the physicochemical properties affecting the adsorption of VOCs, and the effect of the extraction source on these intrinsic features. The present study was focused on the evaluation of unmodified cellulose particles extracted from biodiverse sources in Ecuador as potential VOC decontaminants. Modifications of the natural fibers with polyethylenimine (PEI) coating were performed to enhance the adsorption effectiveness. Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) measurements, and scanning electron microscopy (SEM) methods were used to characterize the physicochemical properties of the isolates. Gas chromatography assays demonstrated that unmodified cellulose can adsorb an aldehyde VOC, hexanal, reaching up to a 56.42 ± 7.30% reduction. Electrostatic coating of the cellulose particles with small quantities of PEI enhanced the VOC remediation capacities (i.e. 98.12 ± 1.18%). Results demonstrated that the biodiverse plant source of the cellulose isolate can affect the gas capturing properties, and that these particles can be an environmentally friendly solution for effective adsorption of VOC pollutants.

Degradation of pesticides using amine-functionalized cellulose nanocrystals.

A series of amine-functionalized cellulose nanocrystal materials were successfully synthesized, characterized, and evaluated for the remediation of pesticide contaminants from organic and aqueous media. Their ability to degrade malathion in organic systems has been examined, resulting in up to 100% degradation of the compound into detectable lower molecular weight by-products. A poly(ethylenimine) cellulose nanocrystal (CNC-PEI) material was also capable of degrading aqueous solutions of malathion, deltamethrin, and permethrin with 100%, 95%, and 78% degradation, respectively. Thus, these materials can potentially serve as a new and viable remediation technique based on their ability to effectively degrade various pesticides. The reusability of the CNC-PEI was also explored. The CNC-PEI material maintained its ability to degrade malathion throughout two wash and re-use cycles.

Strategies for High Grafting Efficiency of Functional Ligands to Lipid Nanoemulsions for RGD-Mediated Targeting of Tumor Cells In Vitro.

Lipid nanoemulsions (LNEs) are promising nanocarriers for delivering high payloads of lipophilic molecules. Nonetheless, the dynamic nature at their aqueous interfaces results in poor surface chemistry and thus ligand functionalization can be challenging. Herein, two independent strategies, postconjugation and preconjugation, were explored to prepare LNEs grafted covalently with model ligands, fluorescein dye and RGD peptide, respectively. Fluorescein was successfully conjugated with high grafting efficiency to an amine-functionalized lipid nanoemulsion (NH2-LNE) as determined by spectrophotometric analysis. First, we formulated NH2-LNEs by a low-energy spontaneous emulsification technique in the presence of oleylamine (OA) within the oily core of the nanodroplets, thus creating primary amine-reactive sites at the oil/water interface. These amines were used to incorporate fluorescein, yielding fluorescent LNEs with grafting efficiencies of 33, 69, and 69% at NH2-LNEs with [OA]oil = 0.18, 0.34, and 0.49 M, respectively. We also developed RGD-labeled LNEs (RGD-LNEs) and evaluated the nanomaterial with model cell lines that overexpress αVß3 integrins on their surfaces. To this end, we initially synthesized an RGD-Oleate fatty acid-peptide conjugate by solid-phase synthesis. The lipophilic segment of this conjugate readily embedded into the oily core of the LNE, and the hydrophilic head (RGD moiety) was oriented toward the LNE interface. In vitro cytotoxicity and cellular uptake studies were undertaken on different cancer cell lines including HaCaT human umbilical vein endothelial cells (HUVECs), MCF-7, and U-87 MG and compared to uptake experiments with RAW 264.7 macrophages. Confocal imaging and flow cytometry showed that RGD-LNEs were preferentially taken up by all of the tumor cell lines but showed very slight accumulation in RAW macrophages. Unmodified LNE controls did not show any appreciable cellular uptake. This work provides a simple and reliable methodology for the incorporation of multiple ligands on a single surface to facilitate active tumor targeting with LNE-based drug/imaging carriers for theranostic applications.

Periodic mesoporous organosilica nanomaterials for rapid capture of VOCs.

Periodic mesoporous organosilica nanoparticles (PMO SiNPs) were developed for the targeted capture of specific volatile organic compounds (VOCs). The removal kinetics for adsorbing VOCs were fast and the maximum removal could be achieved within less than 30 min. PMO SiNPs removed >99% of VOCs at a low sorbent dose (i.e. >0.5 mL analyte per g PMO SiNPs). They also showed good recyclability and maintained reasonable removal efficiencies after five cycles (i.e. 77% and 65% for hexanal and butyric acid vapors, respectively).