RESUMO
This article is presenting completely new observations linked to Polysorbate 80 (PS80) oxidation in biologics drug product. Indeed, we observed that, in the drug product exposed to long contact time (â¼ 1 h) in platinum-cured silicon tubing during the filling, the oxidation of PS80 is dramatically accelerated compared to short contact time. The phenomenon was observed in presence of iron traces (20 ppb), but not in absence of iron (< 2 ppb) or in presence of a chelator like EDTA. Electron Paramagnetic Resonance (EPR) measurements demonstrated the presence of radicals formed during the oxidation. It was deduced that platinum-cured silicon tubing is leaching some radical initiators, most probably peroxides decomposed by the iron. Alternative filling sets made of ThermoPlastic Elastomer (TPE) were investigated, both for the impact on PS80 stability and the filling performance using a peristaltic pump. The results showed that these filling sets were indeed not causing accelerated PS80 degradation but the process was not robust enough; these filling sets being too rigid for the constraints of the peristaltic pump rollers. These results show that there is no practical tubing alternative to platinum silicone cured tubing. To avoid the impact on PS80 oxidation the potential remediations presented in the article are to avoid any trace of iron or to add a chelating agent, or to discard the vials having experimented a filling stop (> 5 min).
Assuntos
Produtos Biológicos , Silício , Platina , Polissorbatos , FerroRESUMO
In the past decade, oral inhalation has been a thriving focus of research to administer antibody directly to the lungs as an aerosol, for local treatment of respiratory diseases. Formulation of inhaled antibodies is central for the stability of antibody, lung safety and to ensure inhaler performances. Surfactants have already been shown to prevent antibody degradation during aerosolization, but little is known about the impact of other components of liquid formulations on the structural stability of antibodies. Here, we report for the first time to the best of our knowledge, a significant effect of the buffering system on monoclonal antibodies stability, during mesh-nebulization. While the monoclonal antibody extensively aggregated in citrate buffer after nebulization and required high concentration of polysorbate 80 (PS80) to maintain protein integrity, acetate and histidine buffers resulted in a slight to moderate aggregation without PS80 and low concentration of PS80 was sufficient to stabilize antibody during mesh-nebulization.
RESUMO
Surfactants are commonly used in biotherapeutic formulations to prevent the formation of aggregates and protect proteins from denaturation. Among them polysorbates are the most widely used. However, they are known to be prone to degradation, mainly via enzymatic hydrolysis and oxidation. In this study, the impact of different conditions and factors on the oxidation of polysorbate 80 (PS80) and of a monoclonal antibody (mAb) was evaluated. In particular, the role of different formulation components (e.g., mAb concentration, pH, buffer, surfactant grade, chelators) was investigated in the presence of iron as transition metal contaminant. The results of our studies demonstrated that PS80 oxidation was accelerated even in the presence of iron levels as low as 20 ppb. In addition, the results showed that the oxidation of a specific solvent-exposed mAb methionine increased with PS80 oxidation, in particular under accelerated stress conditions and that the oxidation phenomenon was hindered in absence of iron or after addition of EDTA. Our results showed that PS80 "all oleate" (PS80-AO) was more sensitive to oxidative degradation than PS80 "multi-compendial" (PS80-MC). Contrary to acetate and citrate buffers, the results showed that the kinetics of PS80 oxidation was pH-dependent in presence of histidine buffer. It was also demonstrated that, when increasing its concentration, the mAb exhibited a protective effect against metal catalyzed PS80 and methionine oxidation. Our systematic studies on the role of the formulation components and potential contaminants (i.e., iron) demonstrated the complexity of the oxidative mechanism and the importance of different competitive systems, including pro-oxidant factors (e.g., iron, pH, PS80 quality) and antioxidant factors (e.g., protein concentration, EDTA, citrate) that may occur in biologic formulations containing PS80.
Assuntos
Anticorpos Monoclonais , Polissorbatos , Catálise , Excipientes , OxirreduçãoRESUMO
The use of Closed System Drug-Transfer Devices (CSTDs) has increased significantly in recent years due to NIOSH and USP recommendations to use them during preparation of hazardous drugs. Mechanistic and material differences between CSTDs and traditional in-use components warrant an assessment of their impact on product quality and dosing accuracy. Using a combination of prevalent CSTDs with biologic molecules, we performed an extensive assessment of the effect of using CSTDs for dose preparation and observed no negative impact on product quality attributes. Additionally, we found that the CSTD hold-up volume is 2 to 4-fold higher than conventional in-use components and exhibited a strong dependence on the CSTD brand used. We also found that the CSTD brand and dosing volume have a major influence on dosing accuracy with suboptimal protein recovery at very low dosing volumes. We identified entrapment of product in the CSTD spike as the root cause for this sub-optimal recovery and found that flushing the CSTD spike with a brand-new syringe and not the dosing syringe aided in complete protein recovery. Taken together we present a systematic approach to evaluate the risks and impact of CSTD to drug product quality, dose preparation, and dosing accuracy.
Assuntos
Exposição Ocupacional , Composição de Medicamentos , Desenvolvimento de Medicamentos , Equipamentos de Proteção , SeringasRESUMO
Respiratory infections are life-threatening and therapeutic antibodies (Ab) have a tremendous opportunity to benefit to patients with pneumonia due to multidrug resistance bacteria or emergent virus, before a vaccine is manufactured. In respiratory infections, inhalation of anti-infectious Ab may be more relevant than intravenous (IV) injection-the standard route-to target the site of infection and improve Ab therapeutic index. One major challenge associated to Ab inhalation is to prevent protein instability during the aerosolization process. Ab drug development for IV injection aims to design a high-quality product, stable to different environment stress. In this study, we evaluated the suitability of Ab formulations developed for IV injection to be extended for inhalation delivery. We studied the aerosol characteristics and the aggregation profile of three Ab formulations developed for IV injection after nebulization, with two mesh nebulizers. Although the formulations for IV injection were compatible with mesh nebulization and deposition into the respiratory tract, the Ab were more unstable during nebulization than exposition to a vigorous shaking. Overall, our findings indicate that Ab formulations developed for IV delivery may not easily be repurposed for inhalation delivery and point to the requirement of a specific formulation development for inhaled Ab.
Assuntos
Sistemas de Liberação de Medicamentos , Nebulizadores e Vaporizadores , Administração por Inalação , Aerossóis , HumanosRESUMO
Therapeutic antibodies (Abs) are emerging as major drugs to treat respiratory diseases, and inhalation may provide substantial benefits for their delivery. Understanding the behavior of Abs after pulmonary deposition is critical for their development. We investigated the pharmacokinetics of a nebulized Ab by continuous sampling in lung parenchyma using microdialysis in non-human primates. We defined the optimal conditions for microdialysis of Ab and demonstrated that lung microdialysis of Ab is feasible over a period of several days. The concentration-profile indicated a two-phase non-linear elimination and/or distribution of inhaled mAbX. Lung exposition was higher than the systemic one over a period of 33 hours and above MabX affinity for its target. The microdialysis results were supported by an excellent relationship with dosages from lung extracts.