Design of Linear B Cell Epitopes and Evaluation of Their Antigenicity, Allergenicity, and Toxicity: An Immunoinformatics Approach.

Immunoinformatics is a modern branch of science formed as a result of the intersection between immunology and computer science. One of the important steps in the design of multi-epitope vaccines is the prediction of B cell epitopes. B cell epitopes are of two types, linear and discontinuous. Linear epitope residues lie next to each other in the primary structure of a protein. The amino acids that constitute discontinuous epitopes lie close to each other in the three-dimensional structure of the protein. Recognition of B cell epitopes by antibodies on an antigen constitutes an important event in the immune responses toward the antigenic challenge and also forms the basis for several immunological applications. Prediction of B cell epitopes in an antigen constitutes one of the important steps in the design of multi-epitope-based vaccines. This chapter explains the prediction of linear B cell epitopes in an antigen as well as their allergenicity, antigenicity, and toxicity by using online tools.

Design of siRNA molecules for silencing of membrane glycoprotein, nucleocapsid phosphoprotein, and surface glycoprotein genes of SARS-CoV2.

The global COVID-19 pandemic caused by SARS-CoV2 infected millions of people and resulted in more than 4 million deaths worldwide. Apart from vaccines and drugs, RNA silencing is a novel approach for treating COVID-19. In the present study, siRNAs were designed for the conserved regions targeting three structural genes, M, N, and S, from forty whole-genome sequences of SARS-CoV2 using four different software, RNAxs, siDirect, i-Score Designer, and OligoWalk. Only siRNAs which were predicted in common by all the four servers were considered for further shortlisting. A multistep filtering approach has been adopted in the present study for the final selection of siRNAs by the usage of different online tools, viz., siRNA scales, MaxExpect, DuplexFold, and SMEpred. All these web-based tools consider several important parameters for designing functional siRNAs, e.g., target-site accessibility, duplex stability, position-specific nucleotide preference, inhibitory score, thermodynamic parameters, GC content, and efficacy in cleaving the target. In addition, a few parameters like GC content and dG value of the entire siRNA were also considered for shortlisting of the siRNAs. Antisense strands were subjected to check for any off-target similarities using BLAST. Molecular docking was carried out to study the interactions of guide strands with AGO2 protein. A total of six functional siRNAs (two for each gene) have been finally selected for targeting M, N, and S genes of SARS-CoV2. The siRNAs have not shown any off-target effects, interacted with the domain(s) of AGO2 protein, and were efficacious in cleaving the target mRNA. However, the siRNAs designed in the present study need to be tested in vitro and in vivo in the future.

Design of a multi-epitope-based vaccine targeting M-protein of SARS-CoV2: an immunoinformatics approach.

In the present study, one of the targets present on the envelopes of coronaviruses, membrane glycoprotein (M) was chosen for the design of a multi-epitope vaccine by Immunoinformatics approach. The B-cell and T-cell epitopes used for the construction of vaccine were antigenic, nonallergic and nontoxic. An adjuvant, ß-defensin and PADRE sequence were included at the N-terminal end of the vaccine. All the epitopes were joined by linkers for decreasing the junctional immunogenicity. Various physicochemical parameters of the vaccine were evaluated. Secondary and tertiary structures were predicted for the vaccine construct. The tertiary structure was further refined, and various parameters related to the refinement of the protein structure were validated by using different tools. Humoral immunity induced by B-cells relies upon the identification of antigenic determinants on the surface of the vaccine construct. In this regard, the vaccine construct was found to consist of several B-cell epitopes in its three-dimensional conformation. Molecular docking of the vaccine was carried out with TLR-3 receptor to study their binding and its strength. Further, protein-protein interactions in the docked complex were visualized using LigPlot+. Population coverage analysis had shown that the multi-epitope vaccine covers 94.06% of the global population. The vaccine construct was successfully cloned in silico into pET-28a (+). Immune simulation studies showed the induction of primary, secondary and tertiary immune responses marked by the increased levels of antibodies, INF-γ, IL-2, TGF-ß, B- cells, CD4+ and CD8+ cells. Finally, the vaccine construct was able to elicit immune response as desired.Communicated by Ramaswamy H. Sarma.

An immunoinformatics approach for the design of a multi-epitope vaccine targeting super antigen TSST-1 of Staphylococcus aureus.

BACKGROUND: TSST-1 is a secretory and pyrogenic superantigen that is being responsible for staphylococcal mediated food poisoning and associated clinical manifestations. It is one of the main targets for the construction of vaccine candidates against Staphylococcus aureus. Most of the vaccines have met failure due to adverse reactions and toxicity reported during late clinical studies. To overcome this, an immunoinformatics approach is being used in the present study for the design of a multi-epitope vaccine to circumvent the problems related to toxicity and allergenicity. RESULTS: In this study, a multi-epitope vaccine against Staphylococcus aureus targeting TSST-1 was designed through an immunoinformatics approach. B cell and T cell epitopes were predicted in silico and mapped with linkers to avoid junctional immunogenicity and to ensure the efficient presentation of exposed epitopes through HLA. ß-defensin and PADRE were adjusted at the N-terminal end of the final vaccine as adjuvants. Physiochemical parameters, antigenicity, and allergenicity of the vaccine construct were determined with the help of online servers. The three-dimensional structure of the vaccine protein was predicted and validated with various tools. The affinity of the vaccine with TLR-3 was studied through molecular docking studies and the interactions of two proteins were visualized using LigPlot+. The vaccine was successfully cloned in silico into pET-28a (+) for efficient expression in E. coli K12 system. Population coverage analysis had shown that the vaccine construct can cover 83.15% of the global population. Immune simulation studies showed an increase in the antibody levels, IL-2, IFN-γ, TGF-ß, B cell, and T cell populations and induced primary, secondary, and tertiary immune responses. CONCLUSION: Multi-epitope vaccine designed through a computational approach is a non-allergic and non-toxic antigen. Preliminary in silico reports have shown that this vaccine could elicit both B cell and T cell responses in the host as desired.

Screening of phytochemical compounds of Tinospora cordifolia for their inhibitory activity on SARS-CoV-2: an in silico study.

In the present study, we explored phytochemical constituents of Tinospora cordifolia in terms of its binding affinity targeting the active site pocket of the main protease (3CL pro) of SARS-CoV-2 using molecular docking study and assessed the stability of top docking complex of tinosponone and 3CL pro using molecular dynamics simulations with GROMACS 2020.2 version. Out of 11 curated screened compounds, we found the significant docking score for tinosponone, xanosporic acid, cardiofolioside B, tembetarine and berberine in Tinospora cordifolia. Based on the findings of the docking study, it was confirmed that tinosponone is the potent inhibitor of main protease of SARS-CoV-2 with the best binding affinity of -7.7 kcal/mol. Further, ADME along with toxicity analysis was studied to predict the pharmacokinetics and drug-likeness properties of five top hits compounds. The molecular dynamics simulation analysis confirmed the stability of tinosponone and 3CL pro complex with a random mean square deviation (RMSD) value of 0.1 nm. The computer-aided drug design approach proved that the compound tinosponone from T. cordifolia is a potent inhibitor of 3CL main protease of SARS-CoV-2. Further, the in vitro and in vivo-based testing will be required to confirm its inhibitory effect on SARS-CoV-2.Communicated by Ramaswamy H. Sarma.

Design of multi-epitope vaccine candidate against SARS-CoV-2: a in-silico study.

The best therapeutic strategy to find an effective vaccine against SARS-CoV-2 is to explore the target structural protein. In the present study, a novel multi-epitope vaccine is designed using in silico tools that potentially trigger both CD4 and CD8 T-cell immune responses against the novel Coronavirus. The vaccine candidate was designed using B and T-cell epitopes that can act as an immunogen and elicits immune response in the host system. NCBI was used for the retrieval of surface spike glycoprotein, of novel corona virus (SARS-CoV-2) strains. VaxiJen server screens the most important immunogen of all the proteins and IEDB server gives the prediction and analysis of B and T cell epitopes. Final vaccine construct was designed in silico composed of 425 amino acids including the 50S ribosomal protein adjuvant and the construct was computationally validated in terms of antigenicity, allergenicity and stability on considering all critical parameters into consideration. The results subjected to the modeling and docking studies of vaccine were validated. Molecular docking study revealed the protein-protein binding interactions between the vaccine construct and TLR-3 immune receptor. The MD simulations confirmed stability of the binding pose. The immune simulation results showed significant response for immune cells. The findings of the study confirmed that the final vaccine construct of chimeric peptide could able to enhance the immune response against nCoV-19.

Molecular docking and dynamic simulations for antiviral compounds against SARS-CoV-2: A computational study.

The aim of this study was to develop an appropriate anti-viral drug against the SARS-CoV-2 virus. An immediately qualifying strategy would be to use existing powerful drugs from various virus treatments. The strategy in virtual screening of antiviral databases for possible therapeutic effect would be to identify promising drug molecules, as there is currently no vaccine or treatment approved against COVID-19. Targeting the main protease (pdb id: 6LU7) is gaining importance in anti-CoV drug design. In this conceptual context, an attempt has been made to suggest an in silico computational relationship between US-FDA approved drugs, plant-derived natural drugs, and Coronavirus main protease (6LU7) protein. The evaluation of results was made based on Glide (Schrödinger) dock score. Out of 62 screened compounds, the best docking scores with the targets were found for compounds: lopinavir, amodiaquine, and theaflavin digallate (TFDG). Molecular dynamic (MD) simulation study was also performed for 20 ns to confirm the stability behaviour of the main protease and inhibitor complexes. The MD simulation study validated the stability of three compounds in the protein binding pocket as potent binders.

Evaluation of haplotype diversity of Achatina fulica (Lissachatina) [Bowdich] from Indian sub-continent by means of 16S rDNA sequence and its phylogenetic relationships with other global populations.

Achatina fulica (Lissachatina fulica) is one of the most invasive species found across the globe causing a significant damage to crops, vegetables, and horticultural plants. This terrestrial snail is native to east Africa and spread to different parts of the world by introductions. India, a hot spot for biodiversity of several endemic gastropods, has witnessed an outburst of this snail population in several parts of the country posing a serious threat to crop loss and also to human health. With an objective to evaluate the genetic diversity of this snail, we have sampled this snail from different parts of India and analyzed its haplotype diversity by means of 16S rDNA sequence information. Apart from this, we have studied the phylogenetic relationships of the isolates sequenced in the present study in relation with other global populations by Bayesian and Maximum-likelihood approaches. Of the isolates sequenced, haplotype 'C' is the predominant one. A new haplotype 'S' from the state of Odisha was observed. The isolates sequenced in the present study clustered with its conspecifics from the Indian sub-continent. Haplotype network analyses were also carried out for studying the evolution of different haplotypes. It was observed that haplotype 'S' was associated with a Mauritius haplotype 'H', indicating the possibility of multiple introductions of A. fulica to India.