RESUMO
AIMS: To evaluate the impact of spatial separation on patient flow in the emergency department. DESIGN: This was a retrospective, time-and-motion analysis conducted from 15 to 22 August, 2022 at the emergency department of a tertiary hospital in Kuala Lumpur, Malaysia. During this duration, spatial separation was implemented in critical and semi-critical zones to separate patients with symptoms of respiratory infections into respiratory area, and patients without into non-respiratory area. This study adhered to the Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) guidelines. METHODS: Patients triaged to critical and semi-critical zones were included in this study. Timestamps of patient processes in emergency department until patient departure were documented. RESULTS: The emergency department length-of-stay was longer in respiratory area compared to non-respiratory area; 527 min (381-698) versus 390 min (285-595) in critical zone and 477 min (312-739) versus 393 min (264-595) in semi-critical zone. In critical zone, time intervals of critical flow processes and compliance to hospital benchmarks were similar in both areas. More patients in respiratory area were managed within the arrival-to-contact ≤30 min benchmark and more patients in non-respiratory area had emergency department length-of-stay ≤8 h. CONCLUSIONS: The implementation of spatial separation in infection control should address decision-to-departure delays to minimise emergency department length of stay. IMPACT: The study evaluated the impact of spatial separation on patient flow in the emergency department. Emergency department length-of-stay was significantly prolonged in the respiratory area. Hospital administrators and policymakers can optimise infection control protocols measures in emergency departments, balancing infection control measures with efficient patient care delivery. REPORTING METHOD: STROBE guidelines. NO PATIENT OR PUBLIC CONTRIBUTION: None. TRIAL AND PROTOCOL REGISTRATION: The study obtained ethics approval from the institution's Medical Ethics Committee (MREC ID NO: 20221113-11727). STATISTICAL ANALYSIS: The author has checked and make sure our submission has conformed to the Journal's statistical guideline. There is a statistician on the author team (Noor Azhar).
RESUMO
Sustainable management of river systems is a serious concern, requiring vigilant monitoring of water contamination levels that could potentially threaten the ecological community. This study focused on the evaluation of water quality in the Jhelum River (JR), Azad Jammu and Kashmir, and northern Punjab, Pakistan. To achieve this, 60 water samples were collected from various points within the JR Basin (JRB) and subjected to a comprehensive analysis of their physicochemical parameters. The study findings indicated that the concentrations of physicochemical parameters in the JRB water remained within safety thresholds for both drinking and irrigation water, as established by the World Health Organization and Pakistan Environmental Protection Agency. These physicochemical parameters refer to various chemical and physical characteristics of the water that can have implications for both human health (drinking water) and agricultural practices (irrigation water). The spatial variations throughout the river course distinguished between the upstream, midstream, and downstream sections. Specifically, the downstream section exhibited significantly higher values for physicochemical parameters and a broader range, highlighting a substantial decline in its quality. Significant disparities in mean values and ranges were evident, particularly in the case of nitrates and total dissolved solids, when the downstream section was compared with its upstream and midstream counterparts. These variations indicated a deteriorating downstream water quality profile, which is likely attributable to a combination of geological and anthropogenic influences. Despite the observed deterioration in the downstream water quality, this study underscores that the JRB within the upper Indus Basin remains safe and suitable for domestic and agricultural purposes. The JRB was evaluated for various irrigation water quality indices. The principal component analysis conducted in this study revealed distinct covariance patterns among water quality variables, with the first five components explaining approximately 79% of the total variance. Recommending the continued utilization of the JRB for irrigation, we advocate for the preservation and enhancement of water quality in the downstream regions.
Assuntos
Irrigação Agrícola , Análise Espacial , Conservação dos Recursos Hídricos , Rios/química , Abastecimento de Água , Qualidade da Água/normasRESUMO
Background: Clinically, the diagnosis and treatment of cholangiocarcinoma are generally different according to the location of occurrence, and the studies rarely consider the differences between different pathological types. Cholangiocarcinomas in large- and middle-sized intrahepatic bile ducts are mostly mucinous, while in small sized bile duct are not; mucinous extrahepatic cholangiocarcinomas are also more common than mucinous intrahepatic cholangiocarcinoma. However, it is unclear whether these pathological type differences are related to the prognosis. Methods: Data of total 22509 patients was analyzed from Surveillance, Epidemiology, and End Results program database out of which 22299 patients were diagnosed with common adeno cholangiocarcinoma while 210 were diagnosed with mucinous cholangiocarcinoma. Based on the propensity score matching (PSM) analysis, between these two groups' clinical, demographic, and therapeutic features were contrasted. The data were analyzed using Cox and LASSO regression analysis and Kaplan-Meier survival curves. Ultimately, overall survival (OS) and cancer specific survival (CSS) related prognostic models were established and validated in test and external datasets and nomograms were created to forecast these patients' prognosis. Results: There was no difference in prognosis between mucinous cholangiocarcinoma and adeno cholangiocarcinoma. Therefore, we constructed prognostic model and nomogram that can be used for mucinous and adeno cholangiocarcinoma at the same time. By comparing the 9 independent key characteristics i.e. Age, tumor size, the number of primary tumors, AJCC stage, Grade, lymph node status, metastasis, surgery and chemotherapy, risk scores were calculated for each individual. By integrating these two pathological types in OS and CSS prognostic models, effective prognosis prediction results could be achieved in multiple datasets (OS: AUC 0.70-0.87; CSS: AUC 0.74-0.89). Conclusion: Age, tumor size, the number of primary tumors, AJCC stage, Grade, lymph node status, metastasis, surgery and chemotherapy are the independent prognostic factors in OS or CSS of the patients with mucinous and ordinary cholangiocarcinoma. Nomogram that can be used for mucinous and adeno cholangiocarcinoma at the same time is of significance in clinical practice and management of cholangiocarcinoma.
Assuntos
Neoplasias dos Ductos Biliares , Colangiocarcinoma , Nomogramas , Humanos , Masculino , Colangiocarcinoma/terapia , Colangiocarcinoma/patologia , Colangiocarcinoma/mortalidade , Feminino , Prognóstico , Pessoa de Meia-Idade , Neoplasias dos Ductos Biliares/patologia , Neoplasias dos Ductos Biliares/terapia , Neoplasias dos Ductos Biliares/mortalidade , Estudos Retrospectivos , Idoso , Programa de SEER , AdultoRESUMO
In the fields of health and biology, fluorescent nanomaterials have emerged as highly potential and very useful candidates for use in biosensor applications. These typical highly powerful nanomaterials are carbon dots (CDs) and graphene quantum dots (GQDs) among many other metallic nanomaterials. In the context of medical biosensors, this review article investigates the techniques of synthesis, and many uses of these nanomaterials, the obstacles that they face, and the potential for their future. We cover the significance of fluorescent nanomaterials, their use in the medical field, as well as the several techniques of synthesis for CDs and GQDs, including ultrasonication, hydrothermal, electrochemical method, surface modification, and solvothermal. In addition, we also discuss their biomedical applications, which include biomolecule detection, disease diagnosis and examine the obstacles and prospective possibilities for development of ultra-bright, ultra-sensitive, and selective biosensors for use in in-vivo research.Fluorescent carbon dots and graphene quantum dots is synthesized by using several types of raw material and methods. These Carbon dots and graphene quantum dots are used in the medical field includes detection of biomaterials, detection of cancer, virus and mutation in DNA.
RESUMO
The SPL gene family (for Squamosa Promoter-binding like Proteins) represents specific transcription factors that have significant roles in abiotic stress tolerance, development and the growth processes of different plants, including initiation of the leaf, branching and development of shoot and fruits. The SPL gene family has been studied in different plant species; however, its role is not yet fully explored in pigeon pea (Cajanus cajan ). In the present study, 11 members of the CcSPL gene family were identified in C. cajan . The identified SPLs were classified into nine groups based on a phylogenetic analysis involving SPL protein sequences from C. cajan , Arabidopsis thaliana , Cicer arietinum , Glycine max , Phaseolus vulgaris , Vigna unguiculata and Arachis hypogaea . Further, the identification of gene structure, motif analysis, domain analysis and presence of cis -regulatory elements in the SPL family members were studied. Based on RNA-sequencing data, gene expression analysis was performed, revealing that CcSPL2.1, 3 and 13A were significantly upregulated for salt-tolerance and CcSPL14 and 15 were upregulated in a salt-susceptible cultivar. Real-time qPCR validation indicated that CcSPL3, 4, 6 and 13A were upregulated under salt stress conditions. Therefore, molecular docking was performed against the proteins of two highly expressed genes (CcSPL3 and CcSPL14 ) with three ligands: abscisic acid, gibberellic acid and indole-3-acetic acid. Afterward, their binding affinity was obtained and three-dimensional structures were predicted. In the future, our study may open avenues for harnessing CcSPL genes in pigeon pea for enhanced abiotic stress resistance and developmental traits.
Assuntos
Cajanus , Cajanus/genética , Cajanus/metabolismo , Proteínas de Plantas/genética , Proteínas de Plantas/química , Proteínas de Plantas/metabolismo , Filogenia , Simulação de Acoplamento Molecular , Estresse Fisiológico/genética , Flores/metabolismoRESUMO
Fused deposition modeling (FDM) is currently used in several fields, such as architecture, manufacturing, and medical applications. FDM was initially developed to produce and create prototypes, but the expense appears excessive for producing final products. Nevertheless, in this day and age, engineers have developed a low-cost 3D printer. One of the major issues with low-cost 3D printers is the low dimensional accuracy and high tolerances of the printed products. Herein, different printing parameters, i.e., layer thickness, printing speed, and raster angle, need to be investigated to enhance the surface roughness of the parts produced using FDM. Thus, the present study focuses on investigating the performance of the surface finish produced by FDM by manipulating different parameters such as layer thickness, printing speed, and raster angle. Taguchi's method, based on the L9 array for experimental design, was employed to elucidate the response variables. The sample model was developed following ISO standards, utilizing polylactic acid (PLA)-aluminum as the filament material. The analysis of variance results indicated that the layer thickness and raster angle significantly affect the surface roughness of the printed parts, with statistical P-values of 0.016 and 0.039, respectively. This enables an easy selection of the optimal printing parameters to achieve the desired surface roughness. The dimensional accuracy of the fabricated part was also evaluated. Thirteen dimensions of the part features were analyzed, and the results showed that the FDM machine exhibited good accuracy for most of the shapes, with a deviation below 5%.
RESUMO
Metal-organic frameworks (MOFs) are promising materials offering exceptional performance across a myriad of applications, attributable to their remarkable physicochemical properties such as regular porosity, crystalline structure, and tailored functional groups. Despite their potential, there is a lack of dedicated reviews that focus on key physicochemical characterizations of MOFs for the beginners and new researchers in the field. This review is written based on our expertise in the synthesis and characterization of MOFs, specifically to provide a right direction for the researcher who is a beginner in this area. In this way, experimental errors can be reduced, and wastage of time and chemicals can be avoided when new researchers conduct a study. In this article, this topic is critically analyzed, and findings and conclusions are presented. We reviewed three well-known XRD techniques, including PXRD, single crystal XRD, and SAXS, which were used for XRD analysis depending on the crystal size and the quality of crystal morphology. The TGA profile was an effective factor for evaluating the quality of the activation process and for ensuring the successful investigation for other characterizations. The BET and pore size were significantly affected by the activation process and selective benzene chain cross-linkers. FTIR is a prominent method that is used to investigate the functional groups on pore surfaces, and this method is successfully used to evaluate the activation process, characterize functionalized MOFs, and estimate their applications. The most significant methods of characterization include the X-ray diffraction, which is utilized for structural identification, and thermogravimetric analysis (TGA), which is used for exploring thermal decomposition. It is important to note that the thermal stability of MOFs is influenced by two main factors: the metal-ligand interaction and the type of functional groups attached to the organic ligand. The textural properties of the MOFs, on the other hand, can be scrutinized through nitrogen adsorption-desorption isotherms experiments at 77 K. However, for smaller pore size, the Argon adsorption-desorption isotherm at 87.3 K is preferred. Furthermore, the CO2 adsorption isotherm at 273 K can be used to measure ultra-micropore sizes and sizes lower than these, which cannot be measured by using the N2 adsorption-desorption isotherm at 77 K. The highest BET was observed in high-valence MOFs that are constructed based on the metal-oxo cluster, which has an excellent ability to control their textural properties. It was found that the synthesis procedure (including the choice of solvent, cross-linker, secondary metal, surface functional groups, and temperature), activation method, and pressure significantly impact the surface area of the MOF and, by extension, its structural integrity. Additionally, Fourier-transform infrared spectroscopy plays a crucial role in identifying active MOF functional groups. Understanding these physicochemical properties and utilizing relevant characterization techniques will enable more precise MOF selection for specific applications.
RESUMO
Excess salinity can affect the growth and development of all plants. Salinization jeopardizes agroecosystems, induces oxidative reactions in most cultivated plants and reduces biomass which affects crop yield. Some plants are affected more than others, depending upon their ability to endure the effects of salt stress. Cotton is moderately tolerant to salt stress among cultivated crops. The fundamental tenet of plant breeding is genetic heterogeneity in available germplasm for acquired characteristics. Variation for salinity tolerance enhancing parameters (morphological, physiological and biochemical) is a pre-requisite for the development of salt tolerant cotton germplasm followed by indirect selection or hybridization programs. There has been a limited success in the development of salt tolerant genotypes because this trait depends on several factors, and these factors as well as their interactions are not completely understood. However, advances in biochemical and molecular techniques have made it possible to explore the complexity of salt tolerance through transcriptomic profiling. The focus of this article is to discuss the issue of salt stress in crop plants, how it alters the physiology and morphology of the cotton crop, and breeding strategies for the development of salinity tolerance in cotton germplasm.
Assuntos
Melhoramento Vegetal , Tolerância ao Sal , Tolerância ao Sal/genética , Perfilação da Expressão Gênica , Fenótipo , Genótipo , SalinidadeRESUMO
The Ovate Family Proteins (OFPs) gene family houses a class of proteins that are involved in regulating plant growth and development. To date, there is no report of the simultaneous functional characterization of this gene family in all members of U's Triangle of Brassica. Here, we retrieved a combined total of 256 OFP protein sequences and analyzed their chromosomal localization, gene structure, conserved protein motif domains, and the pattern of cis-acting regulatory elements. The abundance of light-responsive elements like G-box, MRE, and GT1 motif suggests that OFPs are sensitive to the stimuli of light. The protein-protein interaction network analysis revealed that OFP05 and its orthologous genes were involved in regulating the process of transcriptional repression through their interaction with homeodomain transcription factors like KNAT and BLH. The presence of domains like DNA binding 2 and its superfamily speculated the involvement of OFPs in regulating gene expression. The biotic and abiotic stress, and the tissue-specific expression analysis of the RNA-seq datasets revealed that some of the genes such as BjuOFP30, and BnaOFP27, BolOFP11, and BolOFP10 were highly upregulated in seed coat at the mature stage and roots under various chemical stress conditions respectively which suggests their crucial role in plant growth and development processes. Experimental validation of prominent BnaOFPs such as BnaOFP27 confirmed their involvement in regulating gene expression under salinity, heavy metal, drought, heat, and cold stress. The GO and KEGG pathway enrichment analysis also sheds light on the involvement of OFPs in regulating plant growth and development. These findings have the potential to serve as a forerunner for future studies in terms of functionally diverse analysis of the OFP gene family in Brassica and other plant species.
Assuntos
Brassica , Brassica/genética , Filogenia , Fatores de Transcrição/genética , Estresse Fisiológico/genética , Mapas de Interação de Proteínas , Proteínas de Plantas/genética , Regulação da Expressão Gênica de Plantas , Família Multigênica , Genoma de PlantaRESUMO
Cadmium (Cd) accumulates in the vegetative tissues of rice and wheat crops, posing a serious threat in the food chain. A long-term field experiment was conducted to investigate the effects of rice husk biochar (RHB), farm manure (FM), press mud (PrM), and poultry manure (PM) on the growth, yield, and economics of wheat and rice crops grown with sewage water. The results showed that RHB increased wheat plant height (27%, 66%, 70%), spike-length (33%, 99%, 56%), straw yield (21%, 51%, 49%), and grain yield (42%, 63%, 65%) in year-1, year-2, and year-3, than respective controls. For rice crop, RHB showed the maximum increase in plant height (64%, 92%, 96%), spike length (55%, 95%, 90%), straw yield (34%, 53%, 55%), and grain yield (46%, 66%, 69%) each year (2019-2021), compared to their respective controls. The Cd immobilization was increased by the application of RHB while other treatments followed FM > PrM > PM > control in each year of wheat and rice crops. For year-1, benefit-cost ratio remained maximum with the application of FM while for the 2nd and 3rd years in sequence, RHB proved more economical than other treatments and consistently produced wheat and rice with lower Cd concentration than FM, PrM, and PM in grains. This long-term experiment suggested that the application of organic amendments consistently increased biomass of rice and wheat and decreased the Cd concentration in tissues. The RHB remained more effective compared with FM, PrM, and PM in terms of yield, low Cd accumulation and economics of rice and wheat crops.
Assuntos
Carvão Vegetal , Oryza , Poluentes do Solo , Cádmio/análise , Triticum , Solo , Esterco , Poluentes do Solo/análise , Produtos Agrícolas , Grão Comestível/químicaRESUMO
Dalbergia sissoo Roxb. (Shisham) is a timber-producing species of economic, cultural, and medicinal importance in the Indian subcontinent. In the past few decades, Shisham's dieback disease caused by the fungus Botryodiplodia theobromae has become an evolving issue in the subcontinent endangering its survival. To gain insights into this issue, a standard transcriptome assembly was deployed to assess the response of D. sissoo at the transcriptomic level under the stress of B. theobromae infection. For RNA isolation, the control and infected leaf tissue samples were taken from 1-year-old greenhouse-grown D. sissoo plants after 20 days of stem-base spore inoculation. cDNA synthesis was performed from these freshly isolated RNA samples that were then sent for sequencing. About 18.14 Gb (Giga base) of data was generated using the BGISEQ-500 sequencing platform. In terms of Unigenes, 513,821 were identified after a combined assembly of all samples and then filtering the abundance. The total length of Unigenes, their average length, N50, and GC-content were 310,523,693 bp, 604 bp, 1,101 bp, and 39.95% respectively. The Unigenes were annotated using 7 functional databases i.e., 200,355 (NR: 38.99%), 164,973 (NT: 32.11%), 123,733 (Swissprot: 24.08%), 142,580 (KOG: 27.75%), 139,588 (KEGG: 27.17%), 99,752 (GO: 19.41%), and 137,281 (InterPro: 26.72%). Furthermore, the Transdecoder detected 115,762 CDS. In terms of SSR (Simple Sequence Repeat) markers, 62,863 of them were distributed on 51,508 Unigenes and on the predicted 4673 TF (Transcription Factor) coding Unigenes. A total of 16,018 up- and 19,530 down-regulated Differentially Expressed Genes (DEGs) were also identified. Moreover, the Plant Resistance Genes (PRGs) had a count of 9230. We are hopeful that in the future, these identified Unigenes, SSR markers, DEGs and PRGs will provide the prerequisites for managing Shisham dieback disease, its breeding, and in tree improvement programs.
Assuntos
Dalbergia , Fabaceae , Transcriptoma , Dalbergia/genética , Fabaceae/genética , Anotação de Sequência Molecular , Melhoramento Vegetal , Perfilação da Expressão Gênica , Sequenciamento de Nucleotídeos em Larga Escala , RNA/genéticaRESUMO
This work is aimed at investigating the viability of utilizing cadmium sulfide (CdS) as a buffer layer in CdTe solar cells by analyzing and assessing its optical, photoluminescence, morphological, and electrical properties. These films were fabricated using a thermal coating technique. Optical microscopy was used to observe the changes in morphology resulting from the doping of rare-earth metals such as samarium (Sm) and lanthanum (La) to CdS, while the granular-like structure of the sample was confirmed by scanning electron microscopy. The objective of incorporating Sm and La ions into CdS was to enhance photoconductivity and optimize the optical bandgap, aiming to create a viable charge transport material for photovoltaic devices with enhanced efficiency. Through that process, a noticeable decrease in transmission, from approximately 80 to 68% in the visible region, was observed. Additionally, the bandgap value was reduced from 2.43 to 2.27 eV. Furthermore, during the analysis of the photoluminescence spectra, it was observed that emission peaks occurred in the visible region. These emissions were attributed to electronic transitions that took place via band-to-band and band-to-impurity interactions. The electrical measurements showed an enhancement in conductivity due to the decrease in the bandgap. This notable consequence of the doped materials suggests their utilization in photovoltaic systems.
RESUMO
Gitelman syndrome (GS) is a rare autosomal recessive salt-losing renal tubular disorder associated with a mutation of SLC12A3 or CLCNKB genes which encodes the thiazide-sensitive sodium-chloride co-transporter (NCCT) in the distal renal tubule. It is inherited as an autosomal recessive disorder. Hypokalemia, metabolic alkalosis, hypomagnesemia, hypocalciuria, and renin-angiotensin-aldosterone system (RAAS) activation are characteristics of GS. GS is often misdiagnosed or underdiagnosed owing to its low incidence and lack of awareness. Its prevalence is estimated to be around 1-10 per 40,000 people. We report a case of cardiac arrest secondary to torsade de pointes (TdP) because of GS-induced hypomagnesemia. Our case highlights the importance of clinicians being aware of the potential electrolyte abnormalities and complications associated with GS, as it can lead to catastrophic consequences if not identified and corrected earlier.
RESUMO
Objective To assess the predictive value of three scoring systems, namely the American Society of Anesthesiologists (ASA) classification, the Clinical Frailty Scale (CFS), and the Nottingham Hip Fracture Score (NHFS), in predicting mortality among patients with hip fractures. Materials and methods This retrospective cohort study included 628 participants aged 60 years and above who sought treatment at a UK hospital between January 2018 and December 2018. Data on age, gender, mortality, and assessment scores were collected. The area under the curve was calculated for each receiver operator characteristic (ROC). Cross-tabulation was performed to examine the association between various assessment scores and mortality using the chi-square test. Results The mean age was 80.80±11.18 years. Females were 408 (64.97%). Higher CFS (p<0.001) and NHFS (p<0.001) scores were significantly associated with mortality, while the ASA score did not show a significant association (p=0.225). The calculated area under the curve (AUC) values were as follows: 0.71 (95% CI: 0.65 to 0.76) for CFS, 0.46 (95% CI: 0.39 to 0.53) for NHFS, and 0.41 (95% CI: 0.34 to 0.48) for the ASA score. Utilizing a cut-off of ≥6 for CFS, 57 individuals (98.3%) in the 30-day mortality group were correctly identified. Similarly, the ROC analysis determined a ≥5 cut-off for NHFS accurately predicting 50 patients (86.2%) who deceased within 30 days. Applying an ASA ≥3 cut-off resulted in a predictive mortality rate of 56 (96.6%). The NHFS score demonstrated the highest predictive capability for mortality, with patients scoring ≥5 having a significantly higher risk of mortality compared to those with a score <5. Conclusion This study showed robust correlations between high CFS (≥6) and NHFS (≥5), and mortality within the hip fracture patient cohort.
RESUMO
BACKGROUND: Drought is one of the limiting factors for quality and quantity of cotton lint in tropical and sub-tropical regions. Therefore, development of drought tolerant cotton genotypes have become indispensable. The identification of drought tolerant genotypes is pre-requisite to develop high yielding cultivars suitable for drought affected areas. METHODS: Forty upland cotton accessions were selected on the basis of their adaptability and yield. The collected germplasm accessions were evaluated at seedling stage on the basis of morphological, physiological and biochemical parameters. The experiment was conducted under controlled conditions in greenhouse where these genotypes were sown under different levels of drought stress by following factorial under completely randomized design. The data were collected at seedling stages for root and shoot lengths, relative leaf water content, excised leaf water losses, peroxidase content and hydrogen peroxide concentrations in leaf tissues. RESULTS: The biometrical analysis revealed that germplasm is significantly varied for recorded parameters, likewise interaction of genotypes and water stress was also significantly varied. The cotton germplasm was categorized in eight clusters based on response to water stress. The genotype Cyto-124 exhibited lowest H2O2 content under drought conditions, minimum excised leaf water loss under stress environment was exhibited by genotypes Ali Akber-802 and CEMB-33. Overall, on the basis of morphological and biochemical traits, SL-516 and Cyto-305 were found to be drought tolerant. Genotypes 1852 - 511, Stoneville 15-17 and Delta Pine-55 showed low values for root length, peroxidase activity and higher value for H2O2 contents. On the basis of these finding, these genotypes were declared as drought susceptible. CONCLUSION: The categorization of cotton germplasm indicating the differential response of various parameters under the control and drought stress conditions. The recorded parameters particularly relative leaf water contents and biochemical assays could be utilized to screen large number of germplasm of cotton for water deficit conditions. Besides, the drought tolerant genotypes identified in this research can be utilized in cotton breeding programs for the development of improved cultivars.
Assuntos
Desidratação , Secas , Peróxido de Hidrogênio , Melhoramento Vegetal , Genótipo , Plântula/genética , Gossypium/genética , Peroxidases/genéticaRESUMO
Verticillium wilt is a fungal disease in upland cotton and exerts a significant effect on growth and potential productivity. This disease is mainly caused by V. dahliae Kleb. Ethylene response factor (ERF) is one of the superfamilies of transcription factors that is involved in the development and environmental adaption of crops. A total of 30 ERF.B4 group members were detected in upland cotton and divided into 6 subgroups. Gene structures, conserved motifs, and domain analysis revealed that members in each subgroup are highly conserved. Further, the 30 GhERF.B4 group members were distributed on 18 chromosomes, and 36 gene synteny relationships were found among them. GhERF.B4 genes were ubiquitously expressed in various tissues and developmental stages of cotton. Amongst them, GhERF.B4-15D was predominantly expressed in roots, and its expression was induced by V. dahliae infection. In addition, GhERF.B4-15D responded to methyl jasmonate (MeJA), methyl salicylate (MeSA), and ethylene (ET) phytohormones. It was also found that the V. dahliae resistance was enhanced due to overexpression of GhERF.B4-15D in Arabidopsis thaliana. On the contrary, interference of GhERF.B4-15D by virus-induced gene silencing (VIGS) technology decreased the V. dahliae resistance level in upland cotton. The subcellular localization experiment showed that GhERF.B4-15D was located in the nucleus. Yeast two-hybrid (Y2H) and luciferase complementation (LUC) approaches demonstrated that GhERF.B4-15D interacted with GhDREB1B. Additionally, the V. dahliae resistance was significantly decreased in GhDREB1B knockdowns. Our results showed that GhERF.B4-15D plays a role during V. dahliae infection in cotton.
RESUMO
Introduction: Upland cotton (Gossypium hirsutum) is the main source of natural fiber in the global textile industry, and thus its fiber quality and yield are important parameters. In this study, comparative transcriptomics was used to analyze differentially expressed genes (DEGs) due to its ability to effectively screen candidate genes during the developmental stages of cotton fiber. However, research using this method is limited, particularly on fiber development. The aim of this study was to uncover the molecular mechanisms underlying the whole period of fiber development and the differences in transcriptional levels. Methods: Comparative transcriptomes are used to analyze transcriptome data and to screen for differentially expressed genes. STEM and WGCNA were used to screen for key genes involved in fiber development. qRT-PCR was performed to verify gene expression of selected DEGs and hub genes. Results: Two accessions of upland cotton with extreme phenotypic differences, namely EZ60 and ZR014121, were used to carry out RNA sequencing (RNA-seq) on fiber samples from different fiber development stages. The results identified 704, 376, 141, 269, 761, and 586 genes that were upregulated, and 1,052, 476, 355, 259, 702, and 847 genes that were downregulated at 0, 5, 10, 15, 20, and 25 days post anthesis, respectively. Similar expression patterns of DEGs were monitored using short time-series expression miner (STEM) analysis, and associated pathways of DEGs within profiles were investigated. In addition, weighted gene co-expression network analysis (WGCNA) identified five key modules in fiber development and screened 20 hub genes involved in the development of fibers. Discussion: Through the annotation of the genes, it was found that the excessive expression of resistance-related genes in the early fiber development stages affects the fiber yield, whereas the sustained expression of cell elongation-related genes is critical for long fibers. This study provides new information that can be used to improve fibers in newly developed upland cotton genotypes.
RESUMO
Arginine methylation, catalyzed by the protein arginine methyltransferases (PRMTs), is a common post-translational protein modification (PTM) that is engaged in a plethora of biological events. However, little is known about how the methylarginine-directed signaling functions in germline development. In this study, we discover that Prmt1 is predominantly distributed in the nuclei of spermatogonia but weakly in the spermatocytes throughout mouse spermatogenesis. By exploiting a combination of three Cre-mediated Prmt1 knockout mouse lines, we unravel that Prmt1 is essential for spermatogonial establishment and maintenance, and that Prmt1-catalyzed asymmetric methylarginine coordinates inherent transcriptional homeostasis within spermatogonial cells. In conjunction with high-throughput CUT&Tag profiling and modified mini-bulk Smart-seq2 analyses, we unveil that the Prmt1-deposited H4R3me2a mark is permissively enriched at promoter and exon/intron regions, and sculpts a distinctive transcriptomic landscape as well as the alternative splicing pattern, in the mouse spermatogonia. Collectively, our study provides the genetic and mechanistic evidence that connects the Prmt1-deposited methylarginine signaling to the establishment and maintenance of a high-fidelity transcriptomic identity in orchestrating spermatogonial development in the mammalian germline.