Development of a non-viral gene delivery vector based on the dynein light chain Rp3 and the TAT peptide.

Gene therapy and DNA vaccination trials are limited by the lack of gene delivery vectors that combine efficiency and safety. Hence, the development of modular recombinant proteins able to mimic mechanisms used by viruses for intracellular trafficking and nuclear delivery is an important strategy. We designed a modular protein (named T-Rp3) composed of the recombinant human dynein light chain Rp3 fused to an N-terminal DNA-binding domain and a C-terminal membrane active peptide, TAT. The T-Rp3 protein was successfully expressed in Escherichia coli and interacted with the dynein intermediate chain in vitro. It was also proven to efficiently interact and condense plasmid DNA, forming a stable, small (∼100nm) and positively charged (+28.6mV) complex. Transfection of HeLa cells using T-Rp3 revealed that the vector is highly dependent on microtubule polarization, being 400 times more efficient than protamine, and only 13 times less efficient than Lipofectamine 2000™, but with a lower cytotoxicity. Confocal laser scanning microcopy studies revealed perinuclear accumulation of the vector, most likely as a result of transport via microtubules. This study contributes to the development of more efficient and less cytotoxic proteins for non-viral gene delivery.

Characterization of the human dynein light chain Rp3 and its use as a non-viral gene delivery vector.

Dynein light chains mediate the interaction between the cargo and the dynein motor complex during retrograde microtubule-mediated transport in eukaryotic cells. In this study, we expressed and characterized the recombinant human dynein light chain Rp3 and developed a modified variant harboring an N-terminal DNA-binding domain (Rp3-Db). Our approach aimed to explore the retrograde cell machinery based on dynein to enhance plasmid DNA (pDNA) traffic along the cytosol toward the nucleus. In the context of non-viral gene delivery, Rp3-Db is expected to simultaneously interact with DNA and dynein, thereby enabling a more rapid and efficient transport of the genetic material across the cytoplasm. We successfully purified recombinant Rp3 and obtained a low-resolution structural model using small-angle X-ray scattering. Additionally, we observed that Rp3 is a homodimer under reducing conditions and remains stable over a broad pH range. The ability of Rp3 to interact with the dynein intermediate chain in vitro was also observed, indicating that the recombinant Rp3 is correctly folded and functional. Finally, Rp3-Db was successfully expressed and purified and exhibited the ability to interact with pDNA and mediate the transfection of cultured HeLa cells. Rp3-Db was also capable of interacting in vitro with dynein intermediate chains, indicating that the addition of the N-terminal DNA-binding domain does not compromise its function. The transfection level observed for Rp3-Db is far superior than that reported for protamine and is comparable to that of the cationic lipid Lipofectamine™. This report presents an initial characterization of a non-viral delivery vector based on the dynein light chain Rp3 and demonstrates the potential use of modified human light chains as gene delivery vectors.

Small-angle X-ray scattering and in silico modeling approaches for the accurate functional annotation of an LysR-type transcriptional regulator.

Xylella fastidiosa is a xylem-limited, Gram-negative phytopathogen responsible for economically relevant crop diseases. Its genome was thus sequenced in an effort to characterize and understand its metabolism and pathogenic mechanisms. However, the assignment of the proper functions to the identified open reading frames (ORFs) of this pathogen was impaired due to a lack of sequence similarity in the databases. In the present work, we used small-angle X-ray scattering and in silico modeling approaches to characterize and assign a function to a predicted LysR-type transcriptional regulator in the X. fastidiosa (XfLysRL) genome. XfLysRL was predicted to be a homologue of BenM, which is a transcriptional regulator involved in the degradation pathway of aromatic compounds. Further functional assays confirmed the structural prediction because we observed that XfLysRL interacts with benzoate and cis,cis-muconic acid (also known as 2E,4E-hexa-2,4-dienedioic acid; hereafter named muconate), both of which are co-factors of BenM. In addition, we showed that the XfLysRL protein is differentially expressed during the different stages of X. fastidiosa biofilm formation and planktonic cell growth, which indicates that its expression responds to a cellular signal that is likely related to the aromatic compound degradation pathway. The assignment of the proper function to a protein is a key step toward understanding the cellular metabolic pathways and pathogenic mechanisms. In the context of X. fastidiosa, the characterization of the predicted ORFs may lead to a better understanding of the cellular pathways that are linked to its bacterial pathogenicity.

Characterization of an oxidative stress response regulator, homologous to Escherichia coli OxyR, from the phytopathogen Xylella fastidiosa.

The OxyR oxidative stress transcriptional regulator is a DNA-binding protein that belongs to the LysR-type transcriptional regulators (LTTR) family. It has the ability to sense oxidative species inside the cell and to trigger the cell's response, activating the transcription of genes involved in scavenging oxidative species. In the present study, we have overexpressed, purified and characterized the predicted OxyR homologue (orf xf1273) of the phytopathogen Xylella fastidiosa. This bacterium is the causal agent of citrus variegated chlorosis (CVC) disease caused by the 9a5c strain, resulting in economic and social losses. The secondary structure of the recombinant protein was analyzed by circular dichroism. Gel filtration showed that XfoxyR is a dimer in solution. Gel shift assays indicated that it does bind to its own predicted promoter under in vitro conditions. However, considering our control experiment we cannot state that this interaction occurs in vivo. Functional complementation assays indicated that xfoxyR is able to restore the oxidative stress response in an oxyr knockout Escherichia coli strain. These results show that the predicted orfxf1273 codes for a transcriptional regulator, homologous to E. coli OxyR, involved in the oxidative stress response. This may be important for X. fastidiosa to overcome the defense mechanisms of its host during the infection and colonization processes.

Overexpression and purification of PWL2D, a mutant of the effector protein PWL2 from Magnaporthe grisea.

The rice blast disease caused by the ascomycete Magnaporthe grisea continues to cause a tremendous impact in rice (Oryza sativa) cultures around the world. Elucidating the molecular basis of the fungus interactions with its host might help increase the general understanding of the pathogen-host relationship. At the moment of invasion, the fungus secretes effectors that modify host defenses and cellular processes as they successively invade living rice cells. PWL2, an effector protein, is a known AVR (avirulence) gene product. The PWL2 gene prevents the fungus from infecting weeping lovegrass (Eragrostis curvula). In this study, we identified a PWL2 allele gene (which we termed PWL2D) in a strain of M. grisea. The sequence of PWL2D has only two bases different from that of PWL2, producing alterations in residue 90 and residue 142. However, the alteration of residue 90 (from D(90) to N(90)) is critical to gene function. Here, we cloned the gene PWL2D in a pET System vector, expressed the gene product in Escherichia coli and evaluated by spectroscopic techniques some aspects of the PWL2D structure. While TRX-tagged PWL2D is prone to aggregation, the solubility of PWL2D is improved when it is overexpressed without its original signal peptide. Expression and purification procedures for these constructs are described. Finally, we found out that the protein seems to be an intrinsically disordered protein. Results from these studies will facilitate structural analysis of PWL2D and might contribute to understanding the gene's function and of fungal/plant interactions.

On the stability of plasmid DNA vectors during cell culture and purification.

Gene therapy and DNA vaccination applications have increased the demand for highly purified plasmid DNA (pDNA) in the last years. One of the main problems related to the scale-up of pDNA purification is the degradation of the supercoiled (sc) isoforms during cell culture and multi-stage purification. In this work, a systematic study of the stability of two model plasmids (3,697 and 6,050 bp) during a mid-scale production process, which includes fermentation, alkaline lysis, isopropanol and ammonium sulphate precipitation and hydrophobic interaction chromatography, was performed. Results indicate that by extending cell culture (up to 26 h) and cell lysis (up to 2 h) it is possible to significantly reduce the amounts of RNA, without significantly compromising the yields of the sc pDNA isoform, a feature that could be conveniently exploited for downstream processing purposes. The stability of pDNA upon storage of E. coli pellets at different temperatures indicates that, differently from RNA, pDNA is remarkably stable when stored in cell pellets (>3 weeks at 4 degrees C, >12 weeks at -20 degrees C) prior to processing. With alkaline lysates, however, storage at -20 degrees C is mandatory to avoid sc pDNA degradation within the first 8 weeks. Furthermore, the subsequent purification steps could be carried out at room temperature without significant pDNA degradation. Since the unit operations and process conditions studied in this work are similar to those generally used for plasmid DNA production, the results presented here may contribute to improve the current knowledge on plasmid stability and process optimization.

Recovery of cellulase by HPMC-salt precipitation: analysis by statistical experimental design.

Production of industrial enzymes including cellulases requires minimum cost with the downstream processing. The objective of this work was to analyze the precipitation of cellulases by ammonium sulfate in the presence of hydroxypropyl(methylcellulose) as a co-precipitant through the use of statistical experimental design. The model generated with the experimental results showed that high protein recovery can be achieved at high levels of temperature, aging times, and rate of salt-solution addition, and at a low mixing level. The results also allowed the observation that activity recovery was improved at high levels of temperature, rate of salt addition and mixing level, and a low level of aging time.