RESUMO
ABSTRACT: The As Low As Reasonably Achievable (ALARA) principle includes taking into account economic and societal factors. To consider these factors, decision-aiding techniques such as cost-benefit analysis were introduced by the International Commission on Radiological Protection (ICRP) 50 y ago. Over the years, developments in health economics have led to new ways of deriving the concept of a value of a statistical life (VSL), which now is influencing the monetary value assigned to a unit of collective dose for radiological protection purposes (the α value) used in cost-benefit analyses. The aim of the present study was to estimate an α value useful for occupational radiological protection within the healthcare system of Sweden. A survey based on the stated preference approach was developed and sent to staff who are exposed to ionizing radiation at their work in Region Västra Götaland (Sweden). The survey essentially contained two scenarios: the respondents' willingness to pay for measures against radon exposure at home and their willingness to accept compensation for x-ray exposure at work. Answers from 718 respondents were collected. In the sensitivity analysis of the survey, the overall median VSL based on the two scenarios was calculated to be $50 million (IQR $10 to 363 million). The corresponding α value was established to $1,600 person-mSv -1 ($2,100 person-mSv -1 if excess burden of taxes is excluded). The recommended α value is in the high end compared to other studies but within the interval of values being used by nuclear utilities today. The α value should be seen in the light of ICRP's recommendation about stakeholder involvement as an important part of the optimization process.
RESUMO
Wearing lead aprons and thyroid collars for long periods of time has a subjective component: to balance the effective dose reduction with the effort of carrying a heavy load. Occupational radiation exposure has decreased dramatically in the last century within the health care system. During the same period the use of lead aprons and thyroid collars has also gone up. Therefore, a question that may be raised is: how safe is safe enough? In order to promote stakeholder involvement, the aim of the present study was to investigate staff's experience of discomforts associated with wearing lead aprons and thyroid collars for long periods of time, and also to investigate staff's willingness to tolerate personal dose equivalent (expressed as radiation dose) and the corresponding increase in future cancer risk to avoid wearing these protective tools. A questionnaire was developed and given to staff working in operating or angiography rooms at Skaraborg Hospital in Sweden. The results from the 245 respondents showed that 51% experienced bothersome warmth, 36% experienced fatigue and 26% experienced ache or pain that they believed was associated with wearing lead aprons. One third of the respondents would tolerate a personal dose equivalent of 1 mSv per year to avoid wearing lead aprons, but only a fifth would tolerate the corresponding increase in future cancer risk (from 43% to 43.2%). In conclusion, discomforts associated with wearing lead aprons and thyroid collars for long periods of time are common for the staff using them. At the same time, only a minority of the staff would tolerate a small increase in future cancer risk to avoid wearing them. The present study gives an example of stakeholder involvement and points at the difficulties in making reasonable decisions about the use of these protective tools.
Assuntos
Neoplasias , Lesões por Radiação , Humanos , Glândula Tireoide , Tomada de Decisões , HospitaisRESUMO
OBJECTIVE: There are several studies that show high defect rates of transducers in clinical use. The purpose of the present study was to investigate whether image quality and the risk for misdiagnosis is affected by using defective transducers. METHODS: Four defective transducers with varying degrees of defect severity, still in clinical use, were selected. Forty artifact-affected clinical images from each transducer were compared with images acquired from fully functional transducers, of the same model, in an observer study where four experienced radiologists rated each of the 320 images. The rating tasks included if the artifacts were detectable, if the possible artifacts might affect the diagnosis, how well structural details were reproduced and, finally, an assessment of overall image quality. RESULTS: The artifacts in the images were detectable for three of the four transducers (p < 0.05), and in 121 of 640 assessments of the images from the defective transducers the observers were confident that the artifacts could affect the diagnosis. All four faulty transducers were assessed to have decreased ability to resolve structural details (p < 0.05), and three of the four transducers were assessed to have worse overall image quality (p < 0.05). CONCLUSION: The present study shows that image quality and the risk of misdiagnosis can be affected by using defective transducers. This highlights the importance of frequent quality control of the transducers to avoid decreased image quality and even misdiagnosis.
Assuntos
Artefatos , Transdutores , Controle de QualidadeRESUMO
Purpose: We developed a method to visualize the image distortion induced by nonlinear noise reduction algorithms in computed tomography (CT) systems. Approach: Nonlinear distortion was defined as the induced residual when testing a reconstruction algorithm by the criteria for a linear system. Two types of images were developed: a nonlinear distortion of an object (NLDobject) image and a nonlinear distortion of noise (NLDnoise) image to visualize the nonlinear distortion induced by an algorithm. Calculation of the images requires access to the sinogram data, which is seldomly fully provided. Hence, an approximation of the NLDobject image was estimated. Using simulated CT acquisitions, four noise levels were added onto forward projected sinograms of a typical CT image; these were noise reduced using a median filter with the simultaneous iterative reconstruction technique or a total variation filter with the conjugate gradient least-squares algorithm. The linear reconstruction technique filtered back-projection was also analyzed for comparison. Results: Structures in the NLDobject image indicated contrast and resolution reduction of the nonlinear denoising. Although the approximated NLDobject image represented the original NLDobject image well, it had a higher random uncertainty. The NLDnoise image for the median filter indicated both stochastic variations and structures reminding of the object while for the total variation filter only stochastic variations were indicated. Conclusions: The developed images visualize nonlinear distortions of denoising algorithms. The object may be distorted by the noise and vice versa. Analyzing the distortion correlated to the object is more critical than analyzing a distortion of stochastic variations. The absence of nonlinear distortion may measure the robustness of the denoising algorithm.
RESUMO
Purpose: The aim of our study was to compare the image quality assessments of vascular anatomy between interventional radiographers and interventional radiologists using digital subtraction angiography (DSA) runs acquired during an interventional radiology procedure. Approach: Visual grading characteristics (VGC) analysis was used to assess image quality by comparing two groups of images, where one group consisted of procedures in which radiation dose was optimized (group A, n = 10 ) and one group where dose optimization was not performed (group B, n = 10 ). The radiation dose parameters were optimized based on theoretical and empirical evidence to achieve radiation dose reductions during uterine artery embolization procedures. The two observer groups comprised of interventional radiologists ( n = 4 ) and interventional radiographers ( n = 4 ). Each observer rated the image quality of 20 DSA runs using a five-point rating scale. Results: The VGC analysis produced an area under the VGC curve ( AUC VGC ) of 0.55 for interventional radiographers ( P = 0.61 ) and AUCVGC of 0.52 for interventional radiologists ( P = 0.83 ). The optimization of radiation dose parameters demonstrated a reduction in kerma-area product by 35% ( P = 0.026 , d = 0.5 ) and reference air kerma (Ka, r ) by 43% ( P = 0.042 , d = 0.5 ) between group A and group B. Conclusions: VGC analysis indicated that the image quality assessments of interventional radiographers were comparable with interventional radiologists, where a reduction in radiation dose revealed no effect on both observer groups regarding their image quality assessment of vascular anatomy.
RESUMO
This study sought to achieve radiation dose reductions for patients receiving uterine artery embolisation (UAE) by evaluating radiation dose measurements for the preceding generation (Allura) and upgraded (Azurion) angiography system. Previous UAE regression models in the literature could not be applied to this centre's practice due to being based on different angiography systems and radiation dose predictor variables. The aims of this study were to establish whether radiation dose is reduced with the upgraded angiography system and to develop a regression model to determine predictors of radiation dose specific to the upgraded angiography system. A comparison between Group I (Allura,n= 95) and Group II (Azurion,n= 95) demonstrated a significant reduction in kerma-area product (KAP) and Ka, r (reference air kerma) by 63% (143.2 Gy cm2vs 52.9 Gy cm2;P< 0.001,d= 0.8) and 67% (0.6 Gy vs 0.2 Gy;P< 0.001,d= 0.8), respectively. The multivariable linear regression (MLR) model identified the UAE radiation dose predictors for KAP on the upgraded angiography system as total fluoroscopy dose, Ka, r, and total uterus volume. The predictive accuracy of the MLR model was assessed using a Bland-Altman plot. The mean difference was 0.39 Gy cm2and the limits of agreement were +28.49 and -27.71 Gy cm2, and thus illustrated no proportional bias. The resultant MLR model was considered system-dependent and validated the upgraded angiography system and its advance capabilities to significantly reduce radiation dose. Interventional radiologist and interventional radiographer familiarisation of the system's features and the implementation of the newly established MLR model would further facilitate dose optimisation for all centres performing UAE procedures using the upgraded angiography system.
Assuntos
Embolização da Artéria Uterina , Angiografia , Feminino , Fluoroscopia , Humanos , Doses de Radiação , Radiografia IntervencionistaRESUMO
The purpose of this study was to introduce a continuous quality improvement (CQI) program for radiation dose optimisation during uterine artery embolisation (UAE) and assess its impact on dose reduction and image quality. The CQI program investigated the effects of optimising radiation dose parameters on the kerma-area product (KAP) and image quality when comparing a 'CQI intervention' group (n = 50) and 'Control' group (n = 50). Visual grading characteristics (VGC) analysis was used to assess image quality, using the 'Control' group as a reference. A significant reduction in KAP by 17% (P = 0.041, d = 0.2) and reference air kerma (Ka, r) by 20% (P = 0.027, d = 0.2) was shown between the two groups. The VGC analysis resulted in an area under the VGC curve (AUCVGC) of 0.54, indicating no significant difference in image quality between the two groups (P = 0.670). The implementation of the CQI program and optimisation of radiation dose parameters improved the UAE radiation dose practices at our centre. The dose reduction demonstrated no detrimental effects on image quality.
Assuntos
Embolização da Artéria Uterina , Feminino , Humanos , Melhoria de Qualidade , Doses de RadiaçãoRESUMO
The aim of the present study was to demonstrate cases of cost-benefit analysis within healthcare, of how economic factors can be considered in occupational radiological protection, in agreement with the as low as reasonably achievable principle and present Swedish legislations. In the first part of the present study, a comparison of examples within health economics used by authorities and institutes in Sweden was made. The comparison focused on value of a statistical life, quality-adjusted life year, and monetary cost assigned to a unit of collective dose for radiation protection purposes (α-value). By this comparison, an α-value was determined as an interval between $45 and $450 per man-mSv, for the Swedish society in 2021. The α-value interval can be interpreted as following: Less than $45 per man-mSv is a good investment. From $45 to $450 per man-mSv, other factors than costs and collective dose are important to consider. More than $450 per man-mSv is too expensive. In the second part of the present study, seven cases of cost-benefit analyses in occupational radiological protection were provided. The present study focused specifically on cases where the relevant factors were costs and collective dose. The present case study shows a large variation in costs per collective dose from different types of occupational radiological protection, used at Skaraborg Hospital in Sweden.
Assuntos
Proteção Radiológica , Análise Custo-Benefício , Atenção à Saúde , Humanos , Masculino , Doses de Radiação , SuéciaRESUMO
PURPOSE: To develop a method to perform quality control (QC) of X-ray tubes and automatic exposure control (AEC) as a part of the QC of the radiographic and fluoroscopic X-ray system. Our aim is to verify the output from the X-ray tube by comparing the measured radiation output, or air kerma, to the theoretical output given the applied exposure settings and geometry, in addition to comparing the measured kV to the nominal kV. The AEC system for fluoroscopic and conventional X-ray systems is assessed by determining the absorbed dose to a homogenous phantom with different thicknesses. METHOD: This study presents a model to verify the X-ray tube measurement results and a method to determine the dose to a homogenous phantom (Dphantom ). The following input is needed: a parameterized model of the X-ray spectrum, the X-ray tube measurements using a multifunctional X-ray meter, the exposure parameters recorded via imaging of polymethyl methacrylate (PMMA) slabs of different thickness that simulate the patient using AEC, and a parameterized model for calculating the dose to water from Monte Carlo simulations. The output is the entrance surface dose (ESD) and absorbed dose in the phantom, Dphantom (µGy). In addition, the parameterized X-ray spectrum is used to compare theoretical and measured air kerma as a part of the QC of the X-ray tube. To verify the proposed method, the X-ray spectrum provided in this study, SPECTRUM, was compared to two commercially available spectra, SpekCalc and Institute of Physics and Engineering in Medicine (IPEM) 78. The fraction of energy imparted to the homogenous phantom was compared to the imparted fraction calculated by PCXMC. RESULTS: The spectrum provided in this study was in good agreement with two previously published X-ray spectra. The absolute percentage differences of the spectra varied from 0.05% to 3.9%, with an average of 1.4%, compared to SpekCalc. Similarly, the deviation from IPEM report 78 varied from 0.02% to 2.3%, with an average of 0.74%. The SPECTRUM was parameterized for calculation of the imparted fraction for target angles of 10°, 12°, and 15°, kV (50-150 kV) with the materials Al (2.2-8 mm), Cu (0-1 mm), and any combination of the filters, PMMA and water. The deviation of energy imparted from the results by PCXMC was less than 8% for all measurements across different kV, filtration, and vendors, obtained by using PMMA to record the exposure parameters, while the dose was calculated based on water with same thicknesses as the PMMA. CONCLUSION: This study presents an accurate and suitable method to perform a part of the QC of fluoroscopic and conventional X-ray systems with respect to the X-ray tube and the associated AEC system. The method is suitable for comparing protocols within and between systems via the absorbed dose.
Assuntos
Raios X , Fluoroscopia , Humanos , Método de Monte Carlo , Imagens de Fantasmas , Controle de Qualidade , Doses de RadiaçãoRESUMO
Imaging optimisation can benefit from combining structured data with qualitative data in the form of audio and video recordings. Since video is complex to work with, there is a need to find a workable solution that minimises the additional time investment. The purpose of the paper is to outline a general workflow that can begin to address this issue. What is described is a data management process comprising the three steps of collection, mining and contextualisation. This process offers a way to work systematically and at a large scale without succumbing to the context loss of statistical methods. The proposed workflow effectively combines the video and structured data to enable a new level of insights in the optimisation process.
Assuntos
Diagnóstico por Imagem , Gravação em VídeoRESUMO
Denoising reconstruction techniques can introduce nonlinear properties into computed tomography (CT) systems. These nonlinear algorithms introduce distortion which affects the assessment of the resolution of the system. The purpose of the present study was to decouple and investigate amplitude modulation and waveform distortion in reconstruction algorithms in CT. The methodology developed by Wells, J. R. and Dobbins, J. T. III [Frequency response and distortion properties of nonlinear image processing algorithms and the importance of imaging context. Med. Phys. 40, 091906 (2013)] was adapted to CT reconstruction algorithms. The CT simulating program ASTRA Toolbox© for MATLAB™ was used for the reconstruction of the sinusoidal wave functions. Filtered back projection and the simultaneous iterative reconstruction technique were investigated with simple nonlinear mechanisms: a median filter and a non-negative constraint, respectively. The native reconstruction algorithms were not free from nonlinear waveform distortion, however, none of the metrics showed any dependence on the contrast-to-noise ratio (CNR). Furthermore, the algorithms including nonlinear mechanisms showed a clear and specific CNR dependence, indicating the necessity for distortion analysis in nonlinear CT reconstruction.
Assuntos
Algoritmos , Tomografia Computadorizada por Raios X , Processamento de Imagem Assistida por Computador , Imagens de Fantasmas , Doses de Radiação , Interpretação de Imagem Radiográfica Assistida por ComputadorRESUMO
The purpose of the present work was to evaluate the use of resampling statistical methods for analysis of visual grading data-implemented in the software VGC Analyzer-by comparing the reanalyzed results from previously performed visual grading studies with the results calculated by gold standard receiver operating characteristic (ROC) methodology, Obuchowski-Rockette (OR)-Dorfman-Berbaum-Metz (DBM) multiple-readers and multiple-case (MRMC) and by analysis of simulated visual grading data where the true distribution was presumed to be known. The reanalysis was performed on two multiple-reader studies with non-paired data and paired data, respectively. The simulation study was performed by simulating a large number of visual grading characteristics (VGC) studies and by analyzing the statistical distribution of null hypothesis (H0) rejection rate. The comparison with OR-DBM MRMC showed good agreement when analyzing non-paired data for both fixed-reader and random-reader settings for the calculated area under the curve values and the confidence intervals (CIs). For paired data analysis, VGC Analyzer showed significantly lower CIs compared with the ROC software. This effect was also illustrated by the simulation study, where the VGC Analyzer, in general, showed good accuracy for simulated studies with stable statistical basis. For simulated studies with unstable statistics, the accuracy in the H0 rejection rate decreased. The present study has shown that resampling methodology can be used to accurately perform the statistical analysis of a VGC study, although the resampling technique used makes the method sensitive to small data sets.
Assuntos
Software , Curva ROCRESUMO
PURPOSE: To evaluate two chest tomosynthesis (CTS) scoring systems for cystic fibrosis (CF), one system developed by Vult von Steyern et al. (VvS) and one system based on the Brody scoring system for high-resolution computed tomography (HRCT) (modified Brody (mB)). Brody scoring of HRCT was used as reference. METHODS: In conjunction with routine control HRCT at clinical follow-up, 10 consecutive adult CF patients underwent CTS for research purposes. Four radiologists scored the CTS examinations using the mB and VvS scoring systems. All scores were compared to the Brody HRCT scores. The agreement between the evaluated CTS scoring systems and the reference HRCT scoring system was determined using Spearman's rank correlation coefficient and the intraclass correlation coefficient (ICC). MAJOR FINDINGS: Spearman's rank correlation coefficient showed strong correlations between HRCT score and both the mB and the VvS CTS total scores (median rs = 0.81 and 0.85, respectively). The ICC showed strong correlation between the CTS scoring systems and the reference: 0.88 for mB and 0.85 for VvS scoring. The median time for scoring was 20 and 10 minutes for the mB and VvS scoring systems, respectively. CONCLUSIONS: Both evaluated CTS scoring systems correlate well with the reference standard Brody HRCT scoring. The VvS CTS scoring system has a shorter reading time, suggesting its advantage in clinical practice.
Assuntos
Fibrose Cística , Adulto , Fibrose Cística/diagnóstico por imagem , Humanos , Pulmão/diagnóstico por imagem , Tomografia Computadorizada por Raios XRESUMO
PURPOSE: The high incidence of defective ultrasound transducers in clinical practice has been shown in several studies. Recently, a novel method using only stored images for automatic detection of defective transducers was presented. The method makes it possible to remotely monitor many transducers at the same time and send a notification when a defective transducer is found. The purpose of the present study was to evaluate the novel method and assess how well it performs when compared to an established method as reference. METHODS: To evaluate the novel method, in-air images were collected from 81 transducers in radiologic departments in nine hospitals. Two observers assessed the in-air images and marked the defects. Receiver operating characteristic (ROC)- and alternative free response receiver operating characteristic (AFROC)-curves and their figures of merit (FOM) were calculated for the novel method, using marked defects in the in-air images as reference truth. RESULTS: The area under the ROC curve was 0.88 (SD 0.06), and the AFROC FOM was 0.71 (SE 0.07). CONCLUSION: The result shows that the novel method has a good agreement with the in-air method for detecting defects in ultrasound systems. This indicates that the novel method could be a complement to the normal quality control for early, and automatic detection of defects.
Assuntos
Transdutores , Controle de Qualidade , Curva ROC , UltrassonografiaRESUMO
In contrast to optical colonoscopy, computed tomography colonography (CTC) has the ability to reveal pathology outside of the colon. While identification of colorectal lesions at CTC requires only limited radiation dose, the detection of abnormalities in extracolonic soft tissue requires more radiation. The purpose of this study was to investigate the influence of ultra-low-dose (ULD) CTC on the detection and characterisation of extracolonic findings. In a prospective study 49 patients with colorectal symptoms were examined with CTC adding a ULD series (mean effective dose 0.9 ± 0.4 mSv) to the normal unenhanced standard dose (SD) series (mean effective dose 3.6 ± 1.2 mSv). Five radiologists individually and blindly evaluated the ULD, followed by evaluation of the SD after ≥9 weeks (median 35 weeks). A ViewDEX-based examination protocol was used, including a confidence scale and a graded assessment of need for follow-up according to the CTC Reporting and Data System (C-RADS E0-E4). The reference findings comprised the combined information from CTC (ULD, SD and contrast-enhanced CTC series) and a 4-year radiological and clinical follow-up. For the overall detection of reference findings (E2-E4) we found a statistically significant difference in favour of SD. This, however, was not the case when looking at classification of possibly important/important reference findings (E3-E4). Our results suggest that CTC with ULD (0.9 mSv) is comparable to SD (3.6 mSv) for identification of clinically relevant extracolonic pathology, but there is a large inter-observer variability.
Assuntos
Colonografia Tomográfica Computadorizada , Humanos , Variações Dependentes do Observador , Estudos ProspectivosRESUMO
ViewDEX (Viewer for Digital Evaluation of X-ray Images) is an image viewer compatible with Digital Imaging and Communications in Medicine (DICOM) that has been especially designed to facilitate image perception and observer performance studies within medical imaging. The software was first released in 2004 and since then a continuous development has been ongoing. One of the major drawbacks of previous versions of ViewDEX has been that they have lacked functionality enabling the possibility to evaluate multiple images and/or image stacks simultaneously. This functionality is especially requested by researchers working with modalities, where an image acquisition can result in multiple image stacks (e.g. axial, coronal and sagittal reformations in computed tomography). In ViewDEX 3.0 this functionality has been added and it is now possible to perform image evaluations of multiple images and/or image stacks simultaneously, by using multiple monitors and/or multiple image canvases in monitors. Additionally, some of the previously available functionality has been updated and improved. This paper describes the recent developments of ViewDEX 3.0.
Assuntos
Sistemas de Informação em Radiologia , Software , Processamento de Imagem Assistida por Computador , Tomografia Computadorizada por Raios XRESUMO
RATIONALE AND OBJECTIVES: To evaluate the effect of reduction in effective dose on the reproduction of anatomical structures in chest tomosynthesis (CTS). MATERIALS AND METHODS: Twenty-four CTS examinations acquired at exposure settings resulting in an effective dose of 0.12 mSv for an average sized patient were included in the study. The examinations underwent simulated dose reduction to dose levels corresponding to 32%, 50%, and 70% of the original dose using a previously described and validated method. The image quality was evaluated by five thoracic radiologists who rated the fulfillment of specified image quality criteria in a visual grading study. The ratings for each image quality criterion in the dose-reduced images were compared to the corresponding ratings for the full-dose examinations using visual grading characteristics (VGC) analysis. The area under the resulting VGC curve (AUCVGC) provides a measure of the difference between the ratings, where an AUCVGC of 0.5 indicates no difference. RESULTS: The dose reductions resulted in inferior reproduction of structures compared to the original dose level (AUCVGC <0.5). Structures in the central region of the lung obtained the lowest AUCVGC for each dose level whereas the reproduction of structures in the parenchyma was least affected by the dose reduction. CONCLUSION: Although previous studies have shown that dose reduction in CTS is possible without affecting the performance of certain clinical tasks, the reproduction of normal anatomical structures is significantly degraded even at small reductions. It is therefore important to consider the clinical purpose of the CTS examinations before deciding on a permanent dose reduction.
Assuntos
Radiografia Torácica , Humanos , Doses de Radiação , Proteção Radiológica , Radiografia Torácica/normasRESUMO
BACKGROUND: Digital tomosynthesis (DTS) might be a low-dose/low-cost alternative to computed tomography (CT). PURPOSE: To investigate DTS relative to CT for surveillance of incidental, solid pulmonary nodules. MATERIAL AND METHODS: Recruited from a population study, 106 participants with indeterminate solid pulmonary nodules on CT underwent surveillance with concurrently performed CT and DTS. Nodule size on DTS was assessed by manual diameter measurements and semi-automatic nodule segmentations were independently performed on CT. Measurement agreement was analyzed according to Bland-Altman with 95% limits of agreement (LoA). Detection of nodule volume change > 25% by DTS in comparison to CT was evaluated with receiver operating characteristics (ROC). RESULTS: A total of 81 nodules (76%) were assessed as measurable on DTS by two independent observers. Inter- and intra-observer LoA regarding change in average diameter were ± 2 mm. Calculation of relative volume change on DTS resulted in wide inter- and intra-observer LoA in the order of ± 100% and ± 50%. Comparing relative volume change between DTS and CT resulted in LoA of -58% to 67%. The area under the ROC curve regarding the ability of DTS to detect volumetric changes > 25% on CT was 0.58 (95% confidence interval [CI] = 0.40-0.76) and 0.50 (95% CI = 0.35-0.66) for the two observers. CONCLUSION: The results of the present study show that measurement variability limits the agreement between DTS and CT regarding nodule size change for small solid nodules.
Assuntos
Neoplasias Pulmonares/diagnóstico por imagem , Nódulo Pulmonar Solitário/diagnóstico por imagem , Estudos de Coortes , Feminino , Humanos , Neoplasias Pulmonares/patologia , Masculino , Pessoa de Meia-Idade , Variações Dependentes do Observador , Projetos Piloto , Sensibilidade e Especificidade , Nódulo Pulmonar Solitário/patologia , Suécia , Tomografia Computadorizada por Raios XRESUMO
PURPOSE: This study attempted to develop a method to measure the applied recursive filtration and to determine the noise reduction of four different fluoroscopic systems. The study also attempted to elucidate the importance of considering the recursive filter for quality control tests concerning signal-to-noise ratio (SNR) or image quality. The vendor's settings for recursive filtration factor (ß) are, unfortunately, often not available. Hence, a method to determine the recursive filtration and associated noise reduction would be useful. METHOD: The recursive filter was determined by using a single fluoroscopic series and the method presented in this study. The theoretical noise reduction based on the choice of ß was presented. In addition, the corresponding noise reduction, evaluated as the ratio of the standard deviation of the pixel value between a series with ß equal to zero (recursive filtration off) and ß > 0, was determined for different pulse rates given by pulses per second (pps), doses (mAs) and recursive filter. The images were acquired using clinically relevant radiation quality and quantity. RESULTS: The presented method to measure the recursive filter exhibited high accuracy (1.08%) and precision (1.48%). The recursive filtration and noise reduction were measured for several settings for each vendor. The recursive filtration settings and associated recursive filtration factors for four different vendors were presented. CONCLUSIONS: This study presented an accurate method to determine applied recursive filtration, which was easy to determine. Hence, for all quality control purposes, including noise evaluation, it was possible to consider the essential noise reduction given by the settings for recursive filtration. It was also possible to compare the recursive filtration settings and associated recursive filtration within and between vendors.