Hemolytic Properties of Fine Particulate Matter (PM2.5) in In Vitro Systems.

Epidemiological studies have suggested that inhalation exposure to particulate matter (PM) air pollution, especially fine particles (i.e., PM2.5 (PM with an aerodynamic diameter of 2.5 microns or less)), is causally associated with cardiovascular health risks. To explore the toxicological mechanisms behind the observed adverse health effects, the hemolytic activity of PM2.5 samples collected during different pollution levels in Beijing was evaluated. The results demonstrated that the hemolysis of PM2.5 ranged from 1.98% to 7.75% and demonstrated a clear dose-response relationship. The exposure toxicity index (TI) is proposed to represent the toxicity potential of PM2.5, which is calculated by the hemolysis percentage of erythrocytes (red blood cells, RBC) multiplied by the mass concentration of PM2.5. In a pollution episode, as the mass concentration increases, TI first increases and then decreases, that is, TI (low pollution levels) < TI (heavy pollution levels) < TI (medium pollution levels). In order to verify the feasibility of the hemolysis method for PM toxicity detection, the hemolytic properties of PM2.5 were compared with the plasmid scission assay (PSA). The hemolysis results had a significant positive correlation with the DNA damage percentages, indicating that the hemolysis assay is feasible for the detection of PM2.5 toxicity, thus providing more corroborating information regarding the risk to human cardiovascular health.

A New Look at the Purported Health Benefits of Commercial and Natural Clays.

Clays attributed to have medicinal properties have been used since prehistoric times and are still used today as complementary medicines, which has given rise to unregulated "bioceutical" clays to treat skin conditions. Recently, clays with antibacterial characteristics have been proposed as alternatives to antibiotics, potentially overcoming modern day antibiotic resistance. Clays with suggested antibacterial properties were examined to establish their effects on common wound-infecting bacteria. Geochemical, microscopical, and toxicological characterization of clay particulates, their suspensions and filtered leachates was performed on THP-1 and HaCaT cell lines. Cytoskeletal toxicity, cell proliferation/viability (MTT assays), and migration (scratch wounds) were further evaluated. Clays were assayed for antibacterial efficacy using minimum inhibitory concentration assays. All clays possessed a mineral content with antibacterial potential; however, clay leachates contained insufficient ions to have any antibacterial effects. All clay leachates displayed toxicity towards THP-1 monocytes, while clay suspensions showed less toxicity, suggesting immunogenicity. Reduced clay cytotoxicity on HaCaTs was shown, as many leachates stimulated wound-healing responses. The "Green" clay exhibited antibacterial effects and only in suspension, which was lost upon neutralization. pH and its interaction with clay particle surface charge is more significant than previously understood to emphasize dangers of unregulated marketing and unsubstantiated bioceutical claims.

Pathway-based predictive approaches for non-animal assessment of acute inhalation toxicity.

New approaches are needed to assess the effects of inhaled substances on human health. These approaches will be based on mechanisms of toxicity, an understanding of dosimetry, and the use of in silico modeling and in vitro test methods. In order to accelerate wider implementation of such approaches, development of adverse outcome pathways (AOPs) can help identify and address gaps in our understanding of relevant parameters for model input and mechanisms, and optimize non-animal approaches that can be used to investigate key events of toxicity. This paper describes the AOPs and the toolbox of in vitro and in silico models that can be used to assess the key events leading to toxicity following inhalation exposure. Because the optimal testing strategy will vary depending on the substance of interest, here we present a decision tree approach to identify an appropriate non-animal integrated testing strategy that incorporates consideration of a substance's physicochemical properties, relevant mechanisms of toxicity, and available in silico models and in vitro test methods. This decision tree can facilitate standardization of the testing approaches. Case study examples are presented to provide a basis for proof-of-concept testing to illustrate the utility of non-animal approaches to inform hazard identification and risk assessment of humans exposed to inhaled substances.

An In Vitro Versus In Vivo Toxicogenomic Investigation of Prenatal Exposures to Tobacco Smoke.

Approximately 1 million women smoke during pregnancy despite evidence demonstrating serious juvenile and/or adult diseases being linked to early-life exposure to cigarette smoke. Susceptibility could be determined by factors in previous generations, that is, prenatal or "maternal" exposures to toxins. Prenatal exposure to airborne pollutants such as mainstream cigarette smoke has been shown to induce early-life insults (i.e., gene changes) in Offspring that serve as biomarkers for disease later in life. In this investigation, we have evaluated genome-wide changes in the lungs of mouse Dams and their juvenile Offspring exposed prenatally to mainstream cigarette smoke. An additional lung model was tested alongside the murine model, as a means to find an alternative in vitro, human tissue-based replacement for the use of animals in medical research. Our toxicogenomic and bio-informatic results indicated that in utero exposure altered the genetic patterns of the fetus, which could put them at greater risk for developing a range of chronic illnesses in later life. The genes altered in the in vitro, cell culture model were reflected in the murine model of prenatal exposure to mainstream cigarette smoke. The use of alternative in vitro models derived from human medical waste tissues could be viable options to achieve human endpoint data and conduct research that meets the remits for scientists to undertake the 3Rs practices.

Characterization of pulmonary protein profiles in response to zinc oxide nanoparticles in mice: a 24-hour and 28-day follow-up study.

Although zinc oxide nanoparticles (ZnONPs) are recognized to cause systemic disorders, little is known about the mechanisms that underlie the time-dependent differences that occur after exposure. The objective of this study was to investigate the mechanistic differences at 24 hours and 28 days after the exposure of BALB/c mice to ZnONPs via intratracheal instillation. An isobaric tag for the relative and absolute quantitation coupled with liquid chromatography/tandem mass spectrometry was used to identify the differential protein expression, biological processes, molecular functions, and pathways. A total of 18 and 14 proteins displayed significant changes in the lung tissues at 24 hours and 28 days after exposure, respectively, with the most striking changes being observed for S100-A9 protein. Metabolic processes and catalytic activity were the main biological processes and molecular functions, respectively, in the responses at the 24-hour and 28-day follow-up times. The glycolysis/gluconeogenesis pathway was continuously downregulated from 24 hours to 28 days, whereas detoxification pathways were activated at the 28-day time-point after exposure. A comprehensive understanding of the potential time-dependent effects of exposure to ZnONPs was provided, which highlights the metabolic mechanisms that may be important in the responses to ZnONP.

Particulate matter from both heavy fuel oil and diesel fuel shipping emissions show strong biological effects on human lung cells at realistic and comparable in vitro exposure conditions.

BACKGROUND: Ship engine emissions are important with regard to lung and cardiovascular diseases especially in coastal regions worldwide. Known cellular responses to combustion particles include oxidative stress and inflammatory signalling. OBJECTIVES: To provide a molecular link between the chemical and physical characteristics of ship emission particles and the cellular responses they elicit and to identify potentially harmful fractions in shipping emission aerosols. METHODS: Through an air-liquid interface exposure system, we exposed human lung cells under realistic in vitro conditions to exhaust fumes from a ship engine running on either common heavy fuel oil (HFO) or cleaner-burning diesel fuel (DF). Advanced chemical analyses of the exhaust aerosols were combined with transcriptional, proteomic and metabolomic profiling including isotope labelling methods to characterise the lung cell responses. RESULTS: The HFO emissions contained high concentrations of toxic compounds such as metals and polycyclic aromatic hydrocarbon, and were higher in particle mass. These compounds were lower in DF emissions, which in turn had higher concentrations of elemental carbon ("soot"). Common cellular reactions included cellular stress responses and endocytosis. Reactions to HFO emissions were dominated by oxidative stress and inflammatory responses, whereas DF emissions induced generally a broader biological response than HFO emissions and affected essential cellular pathways such as energy metabolism, protein synthesis, and chromatin modification. CONCLUSIONS: Despite a lower content of known toxic compounds, combustion particles from the clean shipping fuel DF influenced several essential pathways of lung cell metabolism more strongly than particles from the unrefined fuel HFO. This might be attributable to a higher soot content in DF. Thus the role of diesel soot, which is a known carcinogen in acute air pollution-induced health effects should be further investigated. For the use of HFO and DF we recommend a reduction of carbonaceous soot in the ship emissions by implementation of filtration devices.

Resolution of the mediators of in vitro oxidative reactivity in size-segregated fractions that may be masked in the urban PM(10) cocktail.

PM10 (particulate matter 10 µm or less in aerodynamic diameter) has consistently been linked with adverse human health effects, but the physicochemical properties responsible for this effect have not been fully elucidated. The aim of this work was to investigate the potential for carbon black (CB) particles and PM to generate ROS (Reactive Oxygen Species) and to identify the physicochemical properties of the particles responsible for in vitro oxidative reactivity (OR). PM10 was collected in 11 size fractions at a traffic site in Swansea, UK, using an Electrical Low Pressure Impactor (ELPI). The PM physicochemical properties (including size, morphology, type, and transition metals) were tested. The plasmid scission assay (PSA) was used for OR testing of all particles. The ultrafine and fine PM fractions (N28-2399; 28-2399 nm) caused more DNA damage than coarse PM (N2400-10,000), and the increased capacity of the smaller particles to exhibit enhanced (OR) was statistically significant (p<0.05). The most bioreactive fraction of PM was N94-155 with a toxic dose (TD50; mass dose capable of generating 50% plasmid DNA damage) of 69 µg/ml. The mean TD35 was lower for PM than CB particles, indicating enhanced OR for PM. A difference between CB and PM in this study was the higher transition metal content of PM. Zn was the most abundant transition metal (by weight) in the ultrafine-fine PM fractions, and Fe in the fine-coarse PM. Through this comparison, part of the observed increased PM OR was attributed to Zn (and Fe). In this study PM-derived DNA damage was dependent upon; 1) particle size, 2) surface area, and 2) transition metals. This study supports the view that ROS formation by PM10 is related to physicochemistry using evidence with an increased particle size resolution.

A normal and biotransforming model of the human bronchial epithelium for the toxicity testing of aerosols and solubilised substances.

In this article, we provide an overview of the experimental workflow by the Lung and Particle Research Group at Cardiff University, that led to the development of the two in vitro lung models - the normal human bronchial epithelium (NHBE) model and the lung-liver model, Metabo-Lung™. This work was jointly awarded the 2013 Lush Science Prize. The NHBE model is a three-dimensional, in vitro, human tissue-based model of the normal human bronchial epithelium, and Metabo-Lung involves the co-culture of the NHBE model with primary human hepatocytes, thus permitting the biotransformation of inhaled toxicants in an in vivo-like manner. Both models can be used as alternative test systems that could replace the use of animals in research and development for safety and toxicity testing in a variety of industries (e.g. the pharmaceutical, environmental, cosmetics, and food industries). Metabo-Lung itself is a unique tool for the in vitro detection of toxins produced by reactive metabolites. This 21st century animal replacement model could yield representative in vitro predictions for in vivo toxicity. This advancement in in vitro toxicology relies on filter-well technology that will enable a wide-spectrum of researchers to create viable and economic alternatives for respiratory safety assessment and disease-focused research.

Medical waste tissues - breathing life back into respiratory research.

With the advent of biobanks to store human lung cells and tissues from patient donations and from the procurement of medical waste tissues, it is now possible to integrate (both spatially and temporally) cells into anatomically-correct and physiologically-functional tissues. Modern inhalation toxicology relies on human data on exposure and adverse effects, to determine the most appropriate risk assessments and mitigations for beneficial respiratory health. A point in case is the recapitulation of airway tissue, such as the bronchial epithelium, to investigate the impact of air pollution on human respiratory health. The bronchi are the first point of contact for inhaled substances that bypass defences in the upper respiratory tract. Animal models have been used to resolve such inhalation toxicology hazards. However, the access to medical waste tissues has enabled the Lung Particle Research Group to tissue-engineer the Micro-Lung (TM) and Metabo-Lung(TM) cell culture models, as alternatives to animals in basic research and in the safety testing of aerosolised consumer goods. The former model favours investigations focused on lung injury and repair mechanisms, and the latter model provides the element of metabolism, through the co-culturing of lung and liver (hepatocyte) cells. These innovations represent examples of the animal-free alternatives advocated by the 21st century toxicology paradigm, whereby human-derived cell/tissue data will lead to more-accurate and more-reliable public health risk assessments and therapeutic mitigations (e.g. exposure to ambient air pollutants and adverse drug reactions) for lung disease.

Proteomic profiling of human respiratory epithelia by iTRAQ reveals biomarkers of exposure and harm by tobacco smoke components.

Historically, it has been challenging to go beyond epidemiology to investigate the pathogenic changes caused by tobacco smoking. The EpiAirway-100 (MatTek Corp., Ashland, MA) was employed to investigate the effects of cigarette smoke components. Exposure at the air-liquid-interface represented particle and vapour phase components of cigarette smoke. A proteomic study utilising iTRAQ labelling compared expression profiles. The correlative histopathology revealed focal regions of hyperplasia, hypertrophy, cytolysis and necrosis. We identified 466 proteins, 250 with a parameter of two or more peptides. Four of these proteins are potential markers of lung injury and three are related to mechanistic pathways of disease.

Soot-driven reactive oxygen species formation from incense burning.

This study investigated the effects of reactive oxygen species (ROS) generated as a function of the physicochemistry of incense particulate matter (IPM), diesel exhaust particles (DEP) and carbon black (CB). Microscopical and elemental analyses were used to determine particle morphology and inorganic compounds. ROS was determined using the reactive dye, Dichlorodihydrofluorescin (DCFH), and the Plasmid Scission Assay (PSA), which determine DNA damage. Two common types of soot were observed within IPM, including nano-soot and micro-soot, whereas DEP and CB mainly consisted of nano-soot. These PM were capable of causing oxidative stress in a dose-dependent manner, especially IPM and DEP. A dose of IPM (36.6-102.3µg/ml) was capable of causing 50% oxidative DNA damage. ROS formation was positively correlated to smaller nano-soot aggregates and bulk metallic compounds, particularly Cu. These observations have important implications for respiratory health given that inflammation has been recognised as an important factor in the development of lung injury/diseases by oxidative stress. This study supports the view that ROS formation by combustion-derived PM is related to PM physicochemistry, and also provides new data for IPM.

Alternatives for lung research: stuck between a rat and a hard place.

The respiratory system acts as a portal into the human body for airborne materials, which may gain access via the administration of medicines or inadvertently during inhalation of ambient air (e.g. air pollution). The burden of lung disease has been continuously increasing, to the point where it now represents a major cause of human morbidity and mortality worldwide. In the UK, more people die from respiratory disease than from coronary heart disease or non-respiratory cancer. For this reason alone, gaining an understanding of mechanisms of human lung biology, especially in injury and repair events, is now a principal focus within the field of respiratory medicine. Animal models are routinely used to investigate such events in the lung, but they do not truly reproduce the responses that occur in humans. Scientists committed to the more robust Three Rs principles of animal experimentation (Reduction, Refinement and Replacement) have been developing viable alternatives, derived from human medical waste tissues from patient donors, to generate in vitro models that resemble the in vivo human lung environment. In the specific case of inhalation toxicology, human-oriented models are especially warranted, given the new REACH regulations for the handling of chemicals, the rising air pollution problems and the availability of pharmaceutically valuable drugs. Advances in tissue-engineering have made it feasible and cost-effective to construct human tissue equivalents of the respiratory epithelia. The conducting airways of the lower respiratory system are a critical zone to recapitulate for use in inhalation toxicology. Three-dimensional (3-D) tissue designs which make use of primary cells, provide more in vivo-like responses, based on the targeted interactions of multiple cell types supported on artificial scaffolds. These scaffolds emulate the native extracellular matrix, in which cells differentiate into a functional pulmonary tissue. When 3-D cell cultures are employed for testing aerosolised chemicals, drugs and xenobiotics, responses are captured that mirror the events in the in situ human lung and provide human endpoint data.

A novel application for Cocoacrisp protein as a biomarker for experimental pulmonary fibrosis.

Pulmonary fibrosis is a debilitating disease affecting up to 2 million people worldwide, with a median survival rate of only 3 years after diagnosis. The aim of this study was to evaluate a potential protein biomarker (Cocoacrisp, CC) to identify the onset of pulmonary fibrosis. A model of fibrosis was induced via intratracheal instillation of bleomycin, and samples were collected during the early phase of the disease. Immunohistochemical identification of CC was carried out in lung tissue from the bleomycin model. Quantification by image analysis showed CC levels were doubled (p <0.0003), after a single bleomycin dose, but not after double instillation. Microscopic analysis revealed that CC signal was primarily detected on the alveolar surface. The secretion of the novel protein CC during the early stages of bleomycin-induced injury may have the potential to be utilized as a clinical biomarker for the early stages of fibrosis, particularly as it may be detectable in bronchoalveolar lavage fluid.

Genomic biomarkers of pulmonary exposure to tobacco smoke components.

BACKGROUND: Associations between smoking and the development of tobacco-related diseases in humans have historically been assessed by epidemiological studies. These studies are further complicated by the number of chemicals used in tobacco and individual smoking habits. An alternative approach is required to assess the biological responses. OBJECTIVE: Toxicogenomics was carried out to identify early molecular markers for events in pulmonary injury resulting from tobacco smoke components (TSC) exposure. MATERIALS AND METHODS: EpiAirway-100 cells were exposed at the air/liquid interface to representative particle (nicotine; cadmium) and vapour phase [formaldehyde (FA) and ethyl carbamate] components of cigarette smoke. Microarray technology was used to compare expression profiles of human genes associated with toxicity and drug resistance, from control and TSC-treated respiratory epithelium (n=5/dose). RESULTS: Using the GEArray 'toxicology and drug resistance' microarray followed by significance analysis of microarray analysis, 42 mRNA transcripts were found to be significantly altered by the TSC exposure. The vapour [ethyl carbamate, FA and particle (nicotine, cadmium)] phase TSC exhibited differential transcriptional responses that could not be attributed to their chemical phase. The transcriptional changes could be classified according to a functional family, where ethyl carbamate, FA and cadmium classified as carcinogens, demonstrated the highest gene homology when compared with the noncarcinogen, nicotine. DISCUSSION: Analysis of the microarray data and further confirmation (reverse transcriptase-PCR) identified three potential biomarkers for TSC-induced injury. These three genes (CYP7A1, HMOX1 and PTGS1) are highly upregulated and have been linked with mechanistic pathways of disease.

An in vitro approach to assess the toxicity of inhaled tobacco smoke components: nicotine, cadmium, formaldehyde and urethane.

One of the first lines of defence to inhaled toxins is the barrier formed by the tracheobronchial epithelium, making this the ideal region for studying the toxicity of inhaled substances. This study utilises a highly differentiated, three-dimensional, in vitro model of human upper respiratory tract epithelium (EpiAirway-100) to measure the acute toxicological responses to well-characterised tobacco smoke components. To determine the suitability of this model for screening inhaled toxicants, the EpiAirway tissue model (ETM) was treated apically with tobacco smoke components (nicotine, formaldehyde, cadmium, urethane) which are known to induce a variety of toxic effects (e.g. cytotoxic, thrombogenic, carcinogenic). A range of concentrations were used to model different mechanisms and severity of toxicity which were then compared to known in vivo responses. Similar trends in stress response occurred, with distinct alterations to the tissue in response to all four toxins. At high concentrations, cell viability decreased and tight junctions were degraded, but at sub-toxic concentrations epithelial resistance (indicating tissue integrity) increased 20-60% from control. This peak in resistance coincided with an increase in secreted protein levels, elevated cytokine release and goblet cell hyperplasia and hypertrophy. In conclusion, acute exposure to tobacco smoke components induces measurable toxic responses within human respiratory epithelium. Sub-toxic concentrations appear to illicit a protective response by increasing mucus secretion and mediating immune responses via cytokine release. These responses are comparable to human in vivo responses, indicating potential for the ETM as a tool for screening the toxicity of inhaled compounds.